Get the date of compilation
HelloDo you know if it is possible to get the date of compilation by programming? What I want to do is to show to the user, via the label, the date that this application has been built.
Thank you.
I couldn't see the response you are referring, but it seems to me you'll HTH; Amy
News:gls2i6$LQS$1@forums. Macromedia.com...
> I'm sorry but for me, a lemon, this response looks like this:
>
> - How to do X?
> - Just do X and you will have X.
>
> Well... Thanks ;)
>
> I don't know if you me properly. I don't want this label value
> the
> day application starts (I would date to the text of the label
(> creationComplete or something), but when it is compiled into the swf. Don't you
> This means that I
> put this manual before label every relese? Could you please be more
> accurate?
To do some kind of technology side server to read the date of the file, then
Probably spend the value to Flex using flashVars.
Tags: Flex
Similar Questions
-
How can I get the data view to display the same amount of time I save?
I use the Sound and Vibration Measurement Suite. In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall. I am also showing strength in numbers group for several bands and doing cutting-edge research. I record 100 ms of the transient wave. In the data view, why the temporal plots show several seconds of data? What determines how much time will appear in the data view? More important, the power spectrum reflects the power for the entire of several seconds of data displayed? Same question for power in the values of band and cutting-edge research. I want to just this data displayed for 100 ms of the wave that I record. So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?
Finally, what is the best way to make account concisely the recorded data? By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc.. I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care. Help?
Hi TimRsandiego,
SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.
If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:
Let me know if you have any other questions.
Kind regards
-
Can someone show me how to get the data of this vi in four columns in a spreadsheet file.
I'm trying to get the data into four columns on a worksheet. The data consists of two channels and two measures, a maximum voltage and a voltage after x seconds. I enclose the code. Any help would be great. Thank you.
-
Hi all
I'm using Labview 8.5.
I'm trying to get the date system.
I use the Format Date/time string in a "%Y %m %d' format.
The PROBLEM is the Format Date/time string return "YYYYMMDD" only.
Please see my attachment to see.
Please help me with this, whenever I encounter this problem it force to reinstall labview program.
Best thanks!
-
How to get the Date, month, year of the DateTimePicker
Hi, I am using the DateTimePicker.
There are several question about this command:
1. how to get the Date, month and year?
-With the help of myDateTime.value, I get this string ' Wed May 08 14:45 ICT 2013 '-> I have to manually analyze this? Because I need in format yyyy/mm/dd. Or can set the format of dateTimePicker.value?
2 format on dateTimePicker self (on the user interface) is d/m/YY, I can't change to another format?
Thank you
dateTimePicker.value return a QDateTime not a string.
https://developer.BlackBerry.com/Cascades/reference/bb__cascades__datetimepicker.html#property-value
See more:
https://developer.BlackBerry.com/Cascades/reference/QDateTime.html#date
https://developer.BlackBerry.com/Cascades/reference/QDate.html
You can get
day = dateTimePicker.value.date().day() month = dateTimePicker.value.date().month() year= dateTimePicker.value.date().year() dateYYYYMMDD = dateTimePicker.value.date().toString(Qt::ISODate) dateYYYYMMDD2 = dateTimePicker.value.date().toString("YYYY/MM/DD") dateYYYYMMDD3 = dateTimePicker.value.toString("YYYY/MM/DD")
-
Help, please:
I am trying to get the data from the internet in the Simulator. The browser wirks fine and I am able to navigate... but I'm nt get any :-(
Here is my code:
String url =
"http://www * & format = json;
C = HttpConnection
null;
InputStream is =
null;
int rc;
try {
c = (HttpConnection) Connector.open (url);
Get the response code is open the connection,
Send the request and read HTTP response headers.
The headers are stored until asked.
RC = c.getResponseCode ();
if (rc! = HttpConnection.HTTP_OK) {
throw new IOException ("HTTP response code:" + rc);
}
is = c.openInputStream ();
Get the ContentType
The string of type = c.getType ();
The length and process data
int len = (int) c.getLength ();
if (len > 0) {
int actual = 0;
int BytesRead = 0;
byte data = newbyte[len];
while ((bytesread! = len) & (real! = - 1)) {
real = is.read (data, bytesread, len - bytesread);
bytesRead += real;
}
}
else {
int ch;
while ((ch = is.read (())! = - 1). {
}
}
}
catch (E ClassCastException) {
throw new IllegalArgumentException ("not a HTTP URL");
}
finally {
if (is! = null)
is. Close();
if (c! = null)
c.Close ();
}
Are you runing the MDS Simulator? It must be upon the connection form the Simulator, unless you specifically request a direct connection by adding «;» deviceside = true' to your URL.
-
Hello
I lost the password I gave to a drive using Bitlocker in Windows 7, how can I return it or I can get the data in the back of the player? Data are very important because by my studies are concerned. Help, please. Thank you!Hello
I lost the password I gave to a drive using Bitlocker in Windows 7, how can I return it or I can get the data in the back of the player? Data are very important because by my studies are concerned. Help, please. Thank you!People like you that encryption data with bitlocker do it because they want their data accessible only by those who have the certificate. The sad news for you is that you have made a good choice with BitLocker: unless you have the certificate, your data remains inaccessible. There is no backdoor. If he had then BitLocker would be useless. -
How can I get the date and time function to appear as a tile
How can I get the date and time function to appear as a tile
How can I get the date and time function to appear as a tile
WIN8 are delivered with this tile/app. The only way to display the time is to launch the charm bar (Win - key + C) or mouse over to the right up/down. That said go to the Windows store... There are several free applications that display the time / date as a live tile. Good luck.
-
<; dateformat: create, get the date in en_GB, es_ES instance
Hello
I don't know if it's a bug or normal behavior:
I get the date in en_GB, but I ask the date to es_ES, the snippet of code below:
< ics:if condition =' < % = ics. GetList ("FechaBlog")! = null & & ics. GetList("FechaBlog").hasData () % > ' >
< ics:then >
< ics:listget listname =' < % = "FechaBlog" > "fieldname = 'value' output ="Cash out"/ >"
< local: create varname = "currLocale" nomlocale = "es_ES" / >
< dateformat: create name = datestyle 'PostDateFormat' = 'average' timezoneid = "Europe/Madrid" locale = "currLocale" / >
< name dateformat:getdate = "PostDateFormat" value = "< % = ics." GetVar ("cash") % > ' valuetype = "jdbcdate' varname ="FormattedPostDate"/ >
< / ics:then >
< / ics:if >
22-may-2015
I expect to get: 22 -mayo- 2015; But if change the 'average' datestyle to "long", I am getting:
2015 22 Mayo
as expected, in es_ES.
This is the normal behavior? WCS 11.1.1.8
Kind regards
Hello Jorgitoito,
This is how Java has shaped the date in Spanish. It is not specific to the WebCenter Sites.
You can give it a try with this simple Java code:
java.util.Locale locale = new java.util.Locale("es", "ES"); java.text.DateFormat mediumFormat = java.text.DateFormat.getDateInstance(java.text.DateFormat.MEDIUM, locale); System.out.println(mediumFormat.format(new java.util.Date())); java.text.DateFormat longFormat = java.text.DateFormat.getDateInstance(java.text.DateFormat.LONG, locale); System.out.println(longFormat.format(new java.util.Date()));
The results I got:
27-May-2015
2015 27 Mayo
I suspect that 27-May-2015 here is not in English; It is simply the first three letters of mayo.
Kind regards
Stephan.
-
Is there a way to get the data for submission of form of eloqua using the REST API?
I was wondering if there is a way to get the data for submission of form of eloqua using the REST API?
Thank you
On the page that egan related, there is a 'RawData' field for FormSubmit activities. In this area, the raw sending the form query string is returned.
Whatever it is, you can get this info from the activities of the API block, or the endpoints data Rest API.
-
Compare and get the data in the tables (see post for details)
I have two tables TableA and TableB. I struggle to write a query to get the dates of TableB (instead of TableA dates) where TableA dates don't coincide with the tableB (beginning and end).
Example 1: For account A1234,.
TableA got 2 rows 1/31/2014-3/3/2014 (which corresponds to TableB row), but TableA got another rank 31/01/2014 - 31/01/2014 that corresponds with the date of TableB Begin. In this case, I'm looking for output as below,
Use TableB start and end date and combine number two rows from TableA for this account
ACCOUNT TableB_BEGIN TableB_END AMOUNT A1234 31/01/2014 03/03/2014 100.0000000000 Example 2: For the B7777 account.
TableA end date aligns with the end dates of TableB for this account, in this case I want out put as,.
Use TableB start and end date and get the amount of TableA
ACCOUNT TableB_BEGIN TableB_END AMOUNT B7777 05/04/2013 06/05/2013 200.0000000000 Example 3: On behalf of D5555,.
Even a TableA line corresponds with TableA, there are two other rows in TableA matching start date with TableA and correspondence with the end date with TableA, in this case, that I put as,.
Use TableB start and end date and combine number three rows from TableA for this account.
ACCOUNT TableB_BEGIN TableB_END AMOUNT D5555 08/08/2014 10/09/2014 1100.0000000000 Example 4: To account E6666.
Table corresponds to a row with TableB and no additional lines in TableA, just display the data in A table
Tables and data:
create table TableA ( Account varchar2(10) not null, Begin date not null, End date not null, Amount number(19,10) not null ) ; create table TableB ( Account varchar2(10) not null, Begin date not null, End date not null, Amount number(19,10) not null ) ; TableA Data: insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('31-01-2014', 'dd-mm-yyyy'), 0.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('03-03-2014', 'dd-mm-yyyy'), 100.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('B7777', to_date('18-04-2013', 'dd-mm-yyyy'), to_date('06-05-2013', 'dd-mm-yyyy'), 120.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('C6666', to_date('25-06-2014', 'dd-mm-yyyy'), to_date('08-07-2014', 'dd-mm-yyyy'), 10.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('16-08-2014', 'dd-mm-yyyy'), 1000.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 0.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('16-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 100.0000000000); insert into tablea (ACCOUNT, BEGIN, END, AMOUNT) values ('E6666', to_date('01-01-2014', 'dd-mm-yyyy'), to_date('01-02-2014', 'dd-mm-yyyy'), 100.0000000000); TableB Data: insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('A1234', to_date('31-01-2014', 'dd-mm-yyyy'), to_date('03-03-2014', 'dd-mm-yyyy'), 100.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('B7777', to_date('05-04-2013', 'dd-mm-yyyy'), to_date('06-05-2013', 'dd-mm-yyyy'), 200.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('C6666', to_date('06-06-2014', 'dd-mm-yyyy'), to_date('08-07-2014', 'dd-mm-yyyy'), 10.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('D5555', to_date('08-08-2014', 'dd-mm-yyyy'), to_date('10-09-2014', 'dd-mm-yyyy'), 1100.0000000000); insert into tableb (ACCOUNT, BEGIN, END, AMOUNT) values ('E6666', to_date('01-01-2014', 'dd-mm-yyyy'), to_date('01-02-2014', 'dd-mm-yyyy'), 100.0000000000); SELECT A.ACCOUNT, A.BEGIN, A.END, A.AMOUNT, B.ACCOUNT, B.BEGIN, B.END, B.AMOUNT FROM TABLEA A LEFT JOIN TABLEB B ON A.ACCOUNT = B.ACCOUNT
Hello
SeshuGiri wrote:
Hi Frank,.
Your query/solution works very well, but I forgot to mention something in the first post...
Please insert these additional lines and try the request again.
TableA Additional lines:
- Insert into TABLEA (ACCOUNT, BEGIN, END, QUANTITY)
- values ('F9999', to_date (January 2, 2014 ',' dd-mm-yyyy ""), to_date (3 January 2014 ', 'dd-mm-yyyy'), 999.0000000000);
- Insert into TABLEA (ACCOUNT, BEGIN, END, QUANTITY)
- values ('A1234', to_date (March 3, 2014 ',' dd-mm-yyyy ""), to_date (4 March 2014 ', 'dd-mm-yyyy'), 999.0000000000);
TableB Additional lines:
- Insert into TABLEb (ACCOUNT, BEGIN, END, QUANTITY)
- values ('A1234', to_date (March 3, 2014 ',' dd-mm-yyyy ""), to_date (4 March 2014 ', 'dd-mm-yyyy'), 999.0000000000);
Question 1:
The table has a rows for A1234 account (i.e. the time period different than the ranks for the same account)
one is A1234 31/01/2014-03/03/2014, A1234 03/03/2014-03/04/2014
Your query that returns two rows for A1234 account (which is what I want), but the amount is messed up.
ACCOUNT BEGIN END TOTAL_AMOUNT 1 A1234 31/01/2014 03/03/2014 1100 2 A1234 03/03/2014 03/04/2014 1100 Except:
ACCOUNT BEGIN END TOTAL_AMOUNT 1 A1234 31/01/2014 03/03/2014 101 2 A1234 03/03/2014 03/04/2014 999 Question 2:
In some cases TableA will have an account (F9999), but the TableB don't. I can just this line by making the Left Join right join?
I don't get the results with additional data. I get 1099 for two lines where account = 'A1234 '. I get 1100 as the amount on the line with the account = "D5555. You did it other changes to data?
Except:
ACCOUNT BEGIN END TOTAL_AMOUNT 1 A1234 31/01/2014 03/03/2014 101 2 A1234 03/03/2014 03/04/2014 999 Still, I don't see why you want to 101 for the amount of the first row. Why not 100?
How can you know which rows from tablea should get attached to what rows from tableb, when the account is not unique?
Maybe you want something like this:
SELECT a.account
b.begin
b.end
SUM (a.amount) AS total_amount
FROM tablea a
ON a.account = b.account JOIN tableb B
AND a.begin BETWEEN b.begin
AND b.end
AND a.end BETWEEN b.begin
AND b.end
GROUP OF a.account, b.begin, b.end
ORDER BY a.account
;
but I guess just to your needs, and guessing is not a very good or reliable way to solve problems.
Question 2:
In some cases TableA will have an account (F9999), but the TableB don't. I can just this line by making the Left Join right join?
Yes, it looks that you want an outer join. What happened when you tried? As always, post your code, the exact results you want from the given sample data, as well as an explanation of how you get these results from these data.
-
Get the data in table of javafx
Bat I can get the data in table as:
[code]
for (int i = 0; i < dtm.getRowCount (); i ++)
{
for (int j = 0; j < dtm.getColumnCount (); j ++)
dtm.getValueAt (i, j);
[/ code]
But how can I do this with javafx table? I google and google and google and no luck.
In JavaFX make data are stored on a basis per line. Each line contains an element of type T (where you have a TableView
), and each column specifies a value using a callback function that determines the value of the column of the value of a particular line. You can browse the data simply by practice
for (T item : table.getItems()) { // ... }
And then get the value of each column for each element of the given line, since you "know" what each column represents.
For example, in the example of JavaFX documentation, you could do:
for (Person person : table.getItems()) { String firstName = person.getFirstName(); // value in firstName column String lastName = person.getLastName(); // value in lastName column String email = person.getEmail(); // value in email column }
If you want something really generic, you can try
for (T item : table.getItems()) { for (TableColumn
col : table.getColumns()) { Callback , ObservableValue>> cellValueFactory = col.getCellValueFactory(); CellDataFeatures cdf = new CellDataFeatures (table, col, item); Object cellValue = cellValueFactory.call(cdf).get(); // do something with cellValue... } } If you have little chance to this need, unless you write some kind of framework. (I just typed it here, you may have get dirty you with guys a little to make things).
-
Is it possible to see/get the data from the table to a dump file
I have files dmp generated using expdp on oracle 11 g...
expdp_schemas_18MAY2013_1.dmp
expdp_schemas_18MAY2013_2.dmp
expdp_schemas_18MAY2013_3.dmp
Can I use a settings file given below to get the data from the table in the file sql or impdp the only option to load the data of table in database.
VI test1.par
USERID = "/ as sysdba".
DIRECTORY = DATA
dumpfile=expdp_schemas_18MAY2013%S.dmp
SCHEMAS = USER1, USER2
LOGFILE = user_dump_data.log
SQLFILE = user_dump_data. SQL
and impdp parfile = test1.par.
No,
DataPump cannot retrieve a dumpfile data in a flat file.
Dean
-
How to get the dates of discontinuity
If there is discontinuity in dates how we write the query...
I need to get the dates and the dates of discontinuity.
I / p:
item_no first_date second_date
1 January 1, 10 Aug 1, 10
1-01 - 7.-10 1er January 11
1 February 1, 11 1 July 11
"
"
"
o/p:
1 1 January 10 01 - aug - 10
1 02-aug-10 (first_date + 1) 31-aug-10(second_date-1) - dates of discontinuity
1-01 - sep - 10 (second_date) 1st January 11
1 January 2, 11 January 31, 11
1 February 1, 11 1 July 11
'
'
'
Please let me know is possibleSQL> select * 2 from tbl 3 / ID FIRST_DAT SECOND_DA ---------- --------- --------- 1 01-JAN-10 01-AUG-10 1 01-SEP-10 01-JAN-11 1 01-FEB-11 01-JUL-11 SQL> with t1 as ( 2 select tbl.*, 3 lag(second_date) over(partition by id order by first_date) prev_second_date 4 from tbl 5 ), 6 t2 as ( 7 select * 8 from tbl 9 union all 10 select id, 11 prev_second_date + 1, 12 first_date - 1 13 from t1 14 where prev_second_date + 1 < first_date 15 ) 16 select * 17 from t2 18 order by id, 19 first_date 20 / ID FIRST_DAT SECOND_DA ---------- --------- --------- 1 01-JAN-10 01-AUG-10 1 02-AUG-10 31-AUG-10 1 01-SEP-10 01-JAN-11 1 02-JAN-11 31-JAN-11 1 01-FEB-11 01-JUL-11 SQL>
SY.
-
How to get the date for the first Monday of each month
Dear members,
How to get the date for the first Monday of each month.
I wrote the following code
SELECT decode (to_char (trunc (sysdate + 30, 'MM'), 'DAY'), 'MONDAY', trunc (sysdate + 30, 'MM'), NEXT_DAY (trunc (sysdate + 30, 'MM'), "LUN")) FROM DUAL
But he looks at complex bith.
Abhishek
Published by: 9999999 on 8 March 2013 04:30Use the IW format - it will make independent NLS solution. And all you need is truncated 7th day of each month using IW:
select sysdate current_date, trunc(trunc(sysdate,'mm') + 6,'iw') first_monday_the_month from dual / CURRENT_D FIRST_MON --------- --------- 08-MAR-13 04-MAR-13 SQL>
Here is the list of the first Monday of the month of this year:
with t as( select add_months(date '2013-1-1',level-1) dt from dual connect by level <= 12 ) select dt first_of_the_month, trunc(dt + 6,'iw') first_monday_the_month from t / FIRST_OF_ FIRST_MON --------- --------- 01-JAN-13 07-JAN-13 01-FEB-13 04-FEB-13 01-MAR-13 04-MAR-13 01-APR-13 01-APR-13 01-MAY-13 06-MAY-13 01-JUN-13 03-JUN-13 01-JUL-13 01-JUL-13 01-AUG-13 05-AUG-13 01-SEP-13 02-SEP-13 01-OCT-13 07-OCT-13 01-NOV-13 04-NOV-13 FIRST_OF_ FIRST_MON --------- --------- 01-DEC-13 02-DEC-13 12 rows selected. SQL>
SY.
Maybe you are looking for
-
HP laptop - 15-ay015nx: audio come from two headphones and speakers
Hello When I plugin my headphones and play an audio then sound coming from headphones and speakers so please guide me how to solve this problem This problem arises when I reinstalled windows 10 on my laptop Thank you
-
How can I remove the dotted lines around the tag?
If set browser.display.focus_ring_style to zero, I always see the dotted line.You can see this problem on this site (when click on the map). But the problem gets more complicated on the other computer everything is normal.
-
Flight sim gold edition has no voice
I just got and charge of Flight Sim Gold Edition. Everything worked fine except for the ATC, AI get clearances, etc., on the screen, but not the voice. It is so difficult to follow radio traffic. Bill Roberts
-
LaserJet MFP M277dw Pro: problem with printing issue
We have the model HP laserjet MFP M277dw, we love it, but have been a problem with what looks like small pink flies on one side of the paper when it is printed, is there a setting that turns off or what is the cause, thank you
-
I have the duplex unit installed and am able to print two-sided documents. However, I was unable to copy a two-sided original to create a two-sided copy. I insert my CD original duplex in the auto Document Feeder and select duplex from the printer