Receive error message "MFC Application has stop working" when you try to run a PED Basic on Windows 7

Similar Questions

• Error message AIOC exe has stopped working when I try to scan on Dell AIO 924 printer

  I recently bought a Dell studio with Vista (old computer ran XP) desktop computer.  I installed my printer and have been able to do print, but not to digitize from all in one centre, get the above error message

  bredenbm,

  We will try to reinstall the printer using the instructions below. This will install the Dell all-in-one Center.

  First of all, make sure that your computer has all the updates of Windows. I've customized those too, especially the .net framework(required to run many applications). Also make sure you have the latest Java. Since you don't mention how the printer is connected, here the basic instructions for this printer.

  Unplug your printer. Download and run this patch to completely remove the printer from your computer. When the correction is over, it will prompt you to restart your computer. There seems to be a lenghty process so please be patient.

  Restart your computer.

  Download the correct drivers.

  XP drivers

  Vista 32-bit drivers

  Vista 64-bit drivers.

  All other drivers

  Install the appropriate drivers. (Install ONLY the drivers you need) You will be asked when connect you your printer (power on)

  In the digitization to the analysis, if you have the disc that came with the printer, and then insert the floppy disk to the printer and stop running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

• get a ' player rgss has stopped working "when you try to run big fish game

  What is player rgss

  He's the player of games created with RPG Maker.

  Supposed to be This is a fix.

• Error message "Xtray application has stopped working."

  I get the following error messages when I start my computer and enter the part of Windows Vista from the boot sequence.  I am able to close these error messages and works normally, but I fear that they could be a precursor to more serious problems later.  Anyone who understands what is perhaps the underlying problem and how to fix it would be greatly appreciated.

  Error messages

  1. "the procedure entry point? 0CAlert @ QAEQW4ALERT_TYPE@PAUHWND_@@HPB_W2222H2HH_N@Z not found in the Win32RenderingEngine.dll dynamic link library. »

  2. "XTray Application has stopped working".

  Google has no useful info relating to your problem.

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Get the Error message host application has stopped working

  What is a catalyst control center? I get a warning saying that my catalyst control centre: host application has stopped working. is it important, and should I re - download? If so where what to do?

  Hello

  The ATI Catalyst Control Center is a control application of 3D acceleration that allows you to control features of your graphics card. ATI Catalyst Control Center can be used to fine-tune your graphics settings, enable or disable connected display devices, and change the orientation of your desktop, etc. Many features show you a preview of your changes before applying them.

  You can download from following link catalyst control center and check if the problem is solved or not.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Hope that helps.

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• Receiver error message: "systemprotector.exe has stopped working" whenever my computer starts.

  Original title: "systemprotector.exe has stopped working".

  I am on Windows 7 and I get this error systemprotector.exe ceased to function in a pop-up box every time my computer starts up.
  Whatever why is show, and how to fix it?

  Thank you.

  Hi Zachjd,

  Thank you for the question!

  It would be useful that you could answer this question to help you further.

  Have you done a recent software or hardware changes to the system?

  Systemprotector.exe seems to be an associated process of Advanced System Optimizer. If you have installed any Advanced System Optimizer, you can try to uninstall and reinstall the same and check if it helps.

  Uninstall or change a program

  Install a program

  If you need further assistance, please answer and we will be happy to help you.

• SE error message "Windows Explorer has stopped working" when you try to search for document files

  Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727

  When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!

  Please help me

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Hope this information helps.

• Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.

  I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.

  An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.

  Press Win Logo key + R, type: fsmgmt.msc

  You see your own actions?

  If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• I get an error, "host process for windows services has stopped working" when I try to run a program.

  host process for windows services has stopped working a problem caused the program to stop working correctly windows closes

  Original title: host process for windows services has stopped working

  See if you have rootkits. Run tddskiller, if it finds rootkits, select cure, wait for it to finish and then restart your computer

• SE charger of HEALTH professionals has stopped working when you try to install a game.

  I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games.  I searched and found others have had the same problem with this error message.  I found help for Vista users, but there is nothing for the support for Windows 7 users.

  I am running Windows 7 Home Premium 64 bit on a B-311 HP 20 Pavilion with 4 GB of ram.  When I first had this system, I had 8 Home Premium 64-bit Windows installed on it and the game installed without any problems.

  Here are the details of the error message I get:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Start_Here.exe
  Application version: 2.0.1.4712
  Application timestamp: 4402d 429
  Fault Module name: Start_Here.exe
  Fault Module Version: 2.0.1.4712
  Fault Module Timestamp: 4402d 429
  Exception code: c0000005
  Exception offset: 00003045
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 79ee
  More information 2: 79ee8ce1c976216026f008da08a6a3a9
  Additional information 3: c6a2
  Additional information 4: c6a28a6a42863f9b270bcf8e85f99d62

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  I tried even to run the installation with Windows XP SP2 compatible mode set up option and you still get the same error message.

  chk if the game is compatible from this link

  http://www.Microsoft.com/en-in/Windows/compatibility/error/index

  If not install it in compatibility mode and click on the link for more information.

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  If you still have problems with the game contact he is a developer or ask their support for more info...

• installation of Windows services has stopped working when you try to install the software

  Unable to install software.tried cmd method, nothing happens

  Original title: installation of windows services has stopped working

  Hello Mohit,

  Welcome to the Microsoft Community Forums.

  I understand that you have a problem with the Windows Installer service.

  But I would like to know some more information on this issue to help you better.

  (1) what is the full error message?

  (2) what software are you trying to install?

  (3) have you tried to install any other software?

  (4) when you say, "tried cmd method" what exactly mean you?

  In the meantime, please try to follow the following suggestions to solve the problem.

  Method 1: First of all, try to follow the link below to troubleshoot the Windows Installer Service.

  How to fix problems with the Windows service install

  http://support.Microsoft.com/kb/2438651/en-us

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.
   

  I hope this helps. Otherwise, feel free write us back and we will be happy to help you.

  Thank you.

• "Windows host process (Rundll32) has stopped working"-when you try to uninstall/remove programs

  Only, I get this error when I try to uninstall/delete an application from my PC. Running Sfc/scannow and it found nothing wrong. Quick scans of Malwarebytes and MS Essentials is no malicious files, running a full scan of Malwarebytes.
  Please help, I need to uninstall something!
  ---------------------------------------------------------------------
  Windows host process (Rundll32) has stopped working
  Signature of the problem:
  Problem event name: APPCRASH
  Application name: RunDll32.EXE
  Application version: 6.1.7600.16385
  Application timestamp: 4a5bc637
  Fault Module name: StackHash_9629
  Fault Module Version: 6.1.7601.17725
  Timestamp of Module error: 4ec49b8f
  Exception code: c0000374
  Exception offset: 000ce6c3
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 2057
  Information additional 1:9629
  More information 2: 9629b7be96a6d05c3ae74dcb4df31847
  Information additional 3:2716
  Additional information 4: 271690c76c60b0182163ae26acc5f429
  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hello

  Method 1:

  I suggest to set up the computer in a clean boot state, then try to uninstall the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• "automatic update service has stopped working" when you try to install the software

  I'm trying to install Canon Imagebrowser provided with my camera.  Close program ends the installation process but cannot complete.  I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem.  This has happened with the software Imagebrowser - other software on the CD installed fine.

  OK... I thought about it.  Go to the link below and follow the instructions to manually install Imagebrowser.  It worked for me!

  http://USA.Canon.com/Cusa/consumer/standard_display/utility_browser
  Good luck...

• Organizer of 11 elements has stopped working when you try to change an album?

  Anyone encountered this?

  The only place where I had the problem is when you try to change an album.  After that it stops working, items 11 just stops.

  Operating system is Windows 7 Ultimate.

  Thank you...

  This problem has been all resolved with many tests - there ended up being a program called RoboForm (password remember program in the taskbar) has been walking on organizing PSE.  I disabled RoboForm and everything worked, he turned back and organizer failed on the Album / Edit.  I did at least a dozen times and each time the results were predictable - Organizer is broken when RoboForm was conducting and organizing worked when RoboForm has been turned off.

  Thank you... Pete