get the error message "updates configured incorrectly"

Similar Questions

• I get the error message "update system tray has stopped working". My Verizon Online backup program doesn't work so not.

  I have Verizon Online Backup.  I get the message above, and then some: "error [System.IO.FileNotFoundException]: SyncNShare\OnlineBackup.SyncNShare.exe.

  Track: To OnlineBackup.Common.Utility.ApplicationLauncher...

  Verizon Online backup is not able to work.

  Hi NancyB_598,

  Thanks for posting in Microsoft Communities. Provide the following information to understand the issue:

  ·         Did you do changes on the computer before the show?

  ·         When exactly do you get this error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• When you use Windows XP, I get the error message "update of Windows default data locations have changed," How can I fix this?

  For some time I get the above warning message. It all happens in trying to update Windows Defender or essential Windows. What causes this? I am deeply concerned that my computer has been compromised as a result of this error. To all those who will read this. I'm not a pro, computer whiz, or, Einstein with a computer, I think you get the idea. I have a sincere desire to learn as much as I can. I happen to be a more mature person, for whom computers came to me by my only interest. Thanks for your valuable help in this matter.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-to-repair-error-code-0x80070424/ea1163a1-38ca-42ab-9139-26cfbc5ad7b6

  UTC/GMT is 05:32 Friday, October 19, 2012

• When you install Adobe Flash Player 10.3 (install_flashplayer10_chrd_aih.exe) I get the error message 'download configuration failed.

  Firefox 5.0, XP3

  Follow these steps. Here are the two direct links, so you won't see a site, but I've included a screenshot of downloads alike.

  1. Click on this link to download the Flash uninstall program: uninstall_flash_player.exe
  2. Click on it to download the latest installer: install_flash_player.exe
  3. Then close Firefox.
  4. Then, double-click the uninstall_flash_player.exe file downloaded to remove the drive from your machine.
  5. Then restart.
  6. When the PC starts up on the desktop, double-click the file install_flash_player.exe to install the latest version.

  NB. do not use Firefox when uninstalling or installing the procedure.

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Current solution: download IE8 for XP, run who, follow the Setup Wizard, wait for his failure. Download manually upgrade restart, recommended.

  Restart the installation of IE8, wait that he remove previous IE. Reset.

  Installation of IE8 restart to restart. Let it run. May need to restart.

  Try to run windows update again. IF it works, woot, otherwise download the SP3 of XP service pack from Microsoft. As the Windows update fails, you must not download an installer, but an ISO standard. Burn the ISO to a CD and install (way to go...) or download a free tool like 7Zip and unpack iso and install a go from there.

  From there on, the installation of SP3 and hope this works...

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• Windows Mail is not refreshing since 09/02/2012. When I try to update using the F5 key, I get the error messages.

  Windows Mail is not refreshing since 09/02/2012.  When I try to update using the F5 key, I get the error messages.  The only way I can see me new emails is to sign on the web page of my Internet service provider, which I don't like.

  original title: windows mail is NOT refreshing

  It would be useful that Microsoft has put a notice to have several products access our email accounts so that us non-technical people could avoid these problems.

  Maybe it's something that Apple should warn the consumer. I have three e-mail accounts and I receive and send all the accounts on three different computers at the same time and have never had this problem. Your case is the first.

• I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  Hello

  I apologize for the delay in responding.

  This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

  https://support.Microsoft.com/en-us/KB/958044

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

  Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

  Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

  You can use Windows or Macintosh to search all PDF files and start to bring together them.

• Whenever I try to update Acrobat XI 11.0.07 I get the error message: the update could not be applied because Adobe Application Manager is running. Please close Adobe Application Manager and look for updates again. This happened for months,

  Whenever I try to update Acrobat XI version 11.0.07 I get the error message: "the update could not be applied because Adobe Application Manager is running." Please close Adobe Application Manager and look for updates again. »

  
  

  This happened for months and still fails in the same way.

  You can download Acrobat pro XI of the same link:

  https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html