get the geometry ID using SP

Similar Questions

• Cannot connect to a WPA - PSK with WLAN DW1520 Wireless-N particular, but can when no security is set to wireless. How can I get the card to use WPA - PSK?

  I have a DW1520 Wireless-N WLAN Half-Mini card in an Alienware M17X10. I am trying to connect my home through a TRENDNet TEW-435BRM access DSL issue in WPA - PSK.

  I was able to get the card to use the accounts wireless WPA2-PSK and WPA - PSK in other areas is not a problem directly related to WPA - PSK.

  I can get it to connect to the network when the diffuse TRENDnet without security (free release) and when directly plugged into the wireless router, cable - but every time I go to dissemination of WPA - PSK it can't connect?

  While in WPA - PSK the WLAN card can 'see' the network and wireless router can see the 'computer' (and is a 'trust machine'). I have one couple of other previous model Dells connected to the network without problem or needed changes if any ideas why I would have questions here?

  The driver installed is the 'last' to 5.60.48.35.

  I tried to restart the router and the computer without success. I use Windows Firewall.

  No bright sparks that can point me in the right direction?

  Thank you

  Declan

  Hello

  Try resetting the password in the part of the router wireless, then copy and paste it to the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• get the storage you use vCloud API

  I'm trying to figure out how to get the storage you use in an organization using vCO.

  There is information about the storage profiles used to an Org - vDC, but this information contains only the limit.

  My code looks like this:

  for each (var vdc in {org.getVdcs ()})

  for each (var profile in {vdc.toAdminObject () .getStorageProfiles ())}

  System.log (Profile.ToXml ();
  

  }
  

  }

  
  

  In the XML dump I only see the limit configured for this Org - vDC but not the consumption of this limit.

  The information are present in the Web GUI vCloud, how do I get this information from a code?

  Thank you

  Cristian

  LOL, favorite of this place, it will be VERY valuable to you... now, regarding your question, this help?

  This task scriptable takes an object provider VDC as input:

  System.log("============ Provider VDC: "+providerVdc.name+" ============");
  System.log("NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'");
  var vdcs = providerVdc.getAdminVdcs();
  var host = providerVdc.getHost();
  for each (vdc in vdcs){
  System.log("====== Processing Org VDC: "+vdc.name + " ======");
  var queryService = host.getQueryService();
  var profs = vdc.getStorageProfiles();
  for each (var prof in profs) {
  var expression = new VclExpression(VclQueryAdminOrgVdcStorageProfileField.HREF, prof.getReference().href , VclExpressionType.EQUALS);
  var filter = new VclFilter(expression);
  var params = new VclQueryParams();
  params.setFilter(filter);
  var resultSet = queryService.queryRecords(VclQueryRecordType.ADMINORGVDCSTORAGEPROFILE,params);
  
  while (resultSet != null) {
  var records = resultSet.getRecords(new VclQueryResultAdminOrgVdcStorageProfileRecord);
  //System.log(records.length + " records found");
  for each (var record in records) {
  System.log("Storage Profile Name (usedMB/allocatedMB): " + record.name + " ("+record.storageUsedMB+"/"+record.storageLimitMB+")");
  }
  resultSet = resultSet.getNextPage();
  }
  }
  System.log("");
  }
  
  // --------------------------- End code Snippet
  
  Sample output:
  [2013-03-21 12:27:03.553] [I] ============ Provider VDC: pVDC1 ============
  [2013-03-21 12:27:03.554] [I] NOTE: If allocatedMB = 0, then the org vdc has been configured for 'unlimited'
  [2013-03-21 12:27:03.763] [I] ====== Processing Org VDC: demo ======
  [2013-03-21 12:27:03.859] [I] Storage Profile Name (usedMB/allocatedMB): Shared (0/409497)
  [2013-03-21 12:27:03.861] [I]
  [2013-03-21 12:27:03.863] [I] ====== Processing Org VDC: tiny ======
  [2013-03-21 12:27:03.959] [I] Storage Profile Name (usedMB/allocatedMB): Local (1792/6144)
  [2013-03-21 12:27:03.963] [I]
  [2013-03-21 12:27:03.965] [I] ====== Processing Org VDC: CimVDC ======
  [2013-03-21 12:27:04.016] [I] Storage Profile Name (usedMB/allocatedMB): Shared (231680/0)
  [2013-03-21 12:27:04.020] [I]
  March 21 at 12:29 pm
  

• Get the storage you use of a via powercli virutal machine

  Is there a oneliner where I can get the storage you USE a virtual machine?

  example:

  windc configured server used 100 GB 55GO

  I'd like to type something like: get - vm winDC |   Get-usedstorage

  and I want to go 55GO

  I wasn't able to find a good word

  Something like that?

  Get - VM | Select Name, UsedSpaceGB

• After the installation, I get the message "cannot use this product under a guest account. That is what it is?

  I installed Acrobat Pro XI (academic edition).  But I get the message "cannot use this product under a guest account.  What should I do?

  Run as admin / talk to your IT Department.

  Mylenium

• Equium A60: I get the error message using explorer.exe

  Whenever I try to open an image file using paint or Fax/Image viewer, or I try to drag a file to a folder, I get the following error message:

  "Windows Explorer has encountered a problem and needs to close. We are sorry for the inconvenience ".

  The error report says:

  "AppName: explorer.exe AppVer: 6.0.2900.2180 ModName: rpcrt4.dll.
  "ModVer: 5.1.2600.2180 Offset: 000847a 6.

  Also I can't open Web pages that open in a new window, IE. Norton Internet Security 2005 also does not open, but has claimed to be active in the background.

  Does anyone have advice for me?

  I tried all the help for explorer.exe on helpwithwindows.com problems but nothing suggested worked - as spyware, malaware removal. I ran a few controls on-line virus - given that Norton does not work I have tried the scans online.

  The laptop was bought last year, and we have lost the recovery CD - so if we need them, then where we can get replacements?

  Thank you very much

  Jonathan

  HI Jonathan,.

  It seems to me that if your OS has been corrupted, and I would recommend that you re-install. You can get the replacement of any Toshiba authorized Service partner recovery CD. You can get a list of the asp from the Toshiba web site.

  Kind regards

• How can I get the CLK OUT using PLL on NI PXI-6652?

  I'm trying to get out the CLK using internal CLK either or PXI_CLK10_IN and PLL DDS source to the required frequency. In other words, I want the CLK coming OUT the NI PXI-6652 be PLL frequency required.

  Ashok

  Hello

  Unfortunately, it has no direct route in material to get the DDS at PXI_CLK10_IN clock.  In general, PLL is used for external signals that are out of phase with the system and not for signals generated internally.  From the 665 X operating instructions online, here is an overview of the functions of the Board of Directors:

  

• How can I get the keyboard to use only English punctuation

  Laptop HP 2000-300 CA... How can I prevent the keyboard from using the punctuation french when I try to use the English apostrophe, or question marks is what I get when I try to type an exclamation mark E

  I have a Canadian keyboard that gives me some English and french of the characters. I went to the U.S. English keyboard, rebooted and it seems to work. I saw the site you provided however, and if my current solution does not last long... you can be sure to find me on your Web site. Thank you for taking the time to answer.

• cannot get the keyboard to select windows xp when I have only four seconds to select is stuck on windows xp professional and cannot get the keyboard to use arrows to select

  cannot get the keyboard works when reebooting said cd I need driver sata when reebooting he gives four seconds to schrol up to windows xp but the line is highlighted on a windows xp profesional bellows and can't seem to choose windows xp on its own keyboard wont respond but lights from F1 or f2 f3 until f12 choose please help

  A few old machines will not recognize a USB keyboard/mouse until after Windows starts.  Look at the back of your computer and see if you have a PS/2 (round) connector for a keyboard and a mouse.  If you do, then you will need to use a keyboard with a round PS/2 connector or a USB-to-PS/2 adapter and plug the PS/2 connector on the back of your computer so that it recognizes the keyboard until Windows starts on your keyboard.

  The SATA driver applies to your hard drive.  A CD of start-up/installation of Windows XP does not recognize a SATA hard drive.  If you install Windows, you will need to hit F6 at the right time and insert a floppy with the SATA driver on this subject.

  HTH,
  JW

• Remember: if I delete records, do I get the memory they used?

  I have large files which I copied on my externalhard drive.  If I have SupprimerLa files, I get the memory back, they used.

  If you delete the original folders you copied, find you the hard disk space, called secondary memory.

  See you soon.

  Mick Murphy - Microsoft partner

• How to get the Blackberry ID using javascript for Webworks App?

  Hi all

  I have developed a web application using Blackberry webworks SDK and emulator Ripple... Here, I need to get the Blackberry device ID using javascript... Please me... Thanks in advance...

  With respect,

  Marimuthu_P

  HM... There is a sample to get the PIN with javascript.

  https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.identity.html#.UUID

• Unable to get the parameter by using a controller in the OPS

  Hello!

  I am new to using the OPS and will very much appreciate your help!

  FYI:

  Basically, I need to add 2 descriptive flexfields in a page (by creating a VO) and I need to update the table with the data stored on these de facto forces (I did all the logic already).

  I created a (CO) controller that calls a method that is declared in an application module (AM) that runs a stored procedure (CO and the AM were created by me and that they extend a standard CO and I am).

  Problem:

  However, updated just before... I'm having a problem because I can't get a parameter using paramContext.getParameter("reqHeaderId"). who will help me to identify which line I need to update.

  Because the statement is not capture the value, it returns a null value, and I got the following error when I try to convert it to a number in: oracle.apps.fnd.framework.OAException: java.lang.NumberFormatException: null

  It is really important to mention that, before we get to the page where I clicked the Send button that makes the logic mentioned... There are 2 pages before that where I'm trying to capture the setting and the required parameter is defined on the 1st page. I have been checking each standard CO 3 pages and they use the statement pageContext.putParameter ("reqHeaderId"); to switch between the 3 pages (as far as I know, if not please correct me). On the 3rd and last standard CO that it uses pageContext.getParameter ("reqHeaderId"); to get the value and make another logic.

  So why Im not getting the value if I do the same thing (pageContext.getParameter ("reqHeaderId") ;) on my xxController (which extends the standard co)?

  
  

  Here is the code of the controller:

  public class xxController extends standardController {}

  ' Public Sub processRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processRequest (pageContext, webBean);

  }

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)

  {

  super.processFormRequest (pageContext, webBean);

  String str;

  Str = pageContext.getParameter("_FORM_SUBMIT_BUTTON");

  If ((str! = null) & & (str.equals ("SubmitButton")))

  {

  String ReqHeaderId = pageContext.getParameter ("reqHeaderId");

  String ReqLineId = pageContext.getParameter ("reqLindId");

  [Serializable] Parameters = CLIENT1

  {

  ReqHeaderId

  ReqLineId

  pageContext.getParameter ("xxavtBienServicio") //dff

  pageContext.getParameter ("xxavtAttribute3") //dff

  };

  String var = (String) am.invokeMethod ("updateAttributes", parameters CLIENT1);    updateAttributes is the method that converts it to ReqHeaderId number and runs my stored procedure

  }

  }

  }

  Thank you in advance for your help!

  Hello

  I found the reason why I have problems to get the needed values.

  The reason was that the given property has been set to false in order to use pageContext.getParameter must be set to true. So, I went ahead and created as a "value of the form" this way I could put the melted property and keep the hide at the same time field.

  Thanks for your help!

• How to get the full DDL using SQL developer

  Hi all

  I need get the full DDL a table with the details of the index partitions, synonyms, comments (if any) and give information if given any role, use SQL developer. We can achieve the same thing using shortcut F4 on name of the table into a frog, then selecting tab DDL. Is it possible to get the same in SQL Developer also?

  
  

  Also how I see existing procedures using SQL developer?  A toad, we were able to achieve using the schema browser.
  

  Hi all

  I reached by - right click on connection - diagram open... and any browser will even...

• Get the error when using the UTL_SMTP function in Oracle 11 g

  Hello

  I get the error when executing a trigger e-mail code in oracle 11 g:

  I have following trigger on the temporary table:

  CREATE OR REPLACE TRIGGER temp_temp_message AFTER

  INSERT OR UPDATE ON temp_message FOR EACH LINE

  declare

  Conn UTL_SMTP . CONNECTION ;

  msg VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Insert in temp_message values ()1

  );

  When I insert the record in the table there are given the following error.

  ORA-20000: failed to send messages because of the following error: ORA-24247: access denied by access control (ACL) of network list

  ORA-06512: at the 'APPS '. TEMP_TEMP_MESSAGE', line 14

  ORA-04088: error during execution of trigger ' APPS. TEMP_TEMP_MESSAGE'

  But if I run the next plsql through sqlplus send mail successfully:

  declare

  Conn UTL_SMTP . CONNECTION ;

  MSG VARCHAR2 (2000);

  Start

  Conn := UTL_SMTP . open_connection ( host => '10.250.1.149', port=>25 );

  UTL_SMTP . HELO ( conn, '10.250.1.149');

  UTL_SMTP . mail ( conn, '[email protected]');

  UTL_SMTP . RCPT () conn ' [email protected]');

  msg := "Hello, this is test mail." ;

  UTL_SMTP .data( conn, msg);

  UTL_SMTP . quit smoking ( conn );

  exception when others then

  dbms_output.put_line (sqlerrm);

  raise_application_error (-20000,

  "Failed to send because of the following error messages: ' " || sqlerrm);

  end;

  Thanks in advance.

  Yoann

  To resolve ORA-24247 you must:

  (1) create an acl (if it is not already created)

  (2) add the user privileges using the resources of the network

  (3) to use the ACL to a specific address

  This might be useful

  How to fix an ORA-24247: access denied by access control (ACL) of network list | DB tips

• I get the message: access using your Adobe ID has expired. Check your network connection and try again. The network works fine. I need to post this update. What is the problem?

  I have an update to a site that has been for some time. When I click on the "publish" button, I get the error message: access using your Adobe ID has expired. Check your network and try again. The network is fine (email, browsers work). How can I solve this problem?

  

  Hello

  Please see the link below that has the same discussion.

  https://forums.Adobe.com/thread/1934384

  Kind regards

  Vivek