Get the number of CPU of the machine virtual and carrots

Similar Questions

• Is it possible to get the layer, layerset and layer with status layerset...!

  Hello world!

  Is it possible to get the layer, layerset and layer with the status layerset. Because I met a big problem out of it.

  I have a single PS document which is contain the collection of layer, layer with layer games collection. I need apply the function for each layer and layers and each layer games with of layerset.

  I also tried a code, but its error getting. Please help me out of this code...

  -yajiv

  #target photoshop

  app.bringToFront ();

  level of $= 2;

  var app.activeDocument = docRef;

  Journal of the var ="";

  var x = 0;

  var n = number (docRef.layers.length) - 1;

  for (i = 0; i < n; i ++) {}

  var tm = String (docRef.layers [i]);

  var isLayer = tm.lastIndexOf ("ArtLayer");

  var isLayerSet = tm.lastIndexOf ("LayerSet");

  {if(isLayer!=-1)}

  Check_LayerStructure (DocRef.Layers [i], 'Layer');

  }

  {if(isLayerSet!=-1)}

  Check_LayerStructure (DocRef.layerSets, "LayerSets");

  x = x + 1;

  }

  }

  function Check_LayerStructure (objLayer, objflag, x) {------}

  {if(objflag=="Layer")}

  LayetStructure (objLayer, objLayer.name, BlendMode.NORMAL, 100, 100, 0, true, 'Layer');

  }

  else {if(objflag=="LayerSets")

  LayetStructure (objLayer [x] objLayer [x] .name, BlendMode.PASSTHROUGH, 100, 100, 1, true, 'together');

  m = Number (objLayer [x] .layers. Length)

  for (j = 0; j < m; j ++) {}

  var tm = String (objLayer [x] .layers [j]);

  var isLayer = tm.lastIndexOf ("ArtLayer");

  var isLayerSet = tm.lastIndexOf ("LayerSet");

  {if(isLayer!=-1)}

  Check_LayerStructure (objLayer [x]. Layers [j], 'Layer');

  }

  {if(isLayerSet!=-1)}

  Check_LayerStructure (objLayer [x] .layerSets, "LayerSets", x);

  }

  } / / Loop Layerset

  } / / I loop For

  } //Function loop

  function LayetStructure(layerRef,L,bMode,Opt,fillOpt,S,layVisible,Lref) {}

  {if(layerRef.BlendMode!=bMode)}

  If (confirm (L + Lref + "belend mode was bad...!)) \n"+"do you want to change...? »)) {

  layerRef.blendMode = bMode;

  Journal = Journal + "-" + L + Lref + "belend mode has been changed...! \n\n ";

  e = 1;

  }

  }

  {if(layerRef.Opacity!=opt)}

  If (confirm (L + Lref + ' opacity has been "+ Math.round (layerRef.opacity) +"%...! ")) \n"+"do you want to change...? »)) {

  layerRef.opacity = Opt;

  Journal = Journal + "-" + L + Lref + ' opacity was changed to 100...! \n\n ";

  e = 1;

  }

  }

  If (layerRef.fillOpacity! = fillOpt & & S == 0) {}

  If (confirm (L + Lref + ' Fill has been "+ Math.round (layerRef.fillOpacity) +"%...! ")) \n"+"do you want to change...? »)) {

  layerRef.fillOpacity = fillOpt;

  Journal = Journal + "-" + L + Lref + ' fill has been changed to 100...! \n\n ";

  e = 1;

  }

  }

  {if(layerRef.visible!=layVisible)}

  If (L + Lref + ' left eye...! ") \n"+"do you want to change...? ») {

  layerRef.visible = layVisible;

  Journal = Journal + "-" + L + Lref + ' eye was turn on...! \n\n ";

  e = 1;

  }

  }

  }

  Code of responsible for the action would naturally faster, but if you should be more comfortable with the DOM code, it could be useful to you.

  #target photoshop

  var theLayers = collectLayers (app.activeDocument, []);

  Alert (theLayers.join ("\n"));

  function to collect all the layers.

  function collectLayers (theParent, allLayers) {}

  If (! allLayers) {var allLayers = new Array}

  else {};

  the number of var theParent.layers.length = - 1;

  for (var m = number; m > = 0; m-) {}

  var theLayer = theParent.layers [m];

  apply the function of games of layers;

  If (theLayer.typename == "ArtLayer") {}

  allLayers.push ([theLayer, theLayer.blendMode, theLayer.opacity, theLayer.fillOpacity])

  }

  else {}

  allLayers = (collectLayers (theLayer, allLayers))

  This line includes layer groups;

  allLayers.push ([theLayer, theLayer.blendMode, theLayer.opacity, theLayer.fillOpacity]);

  }

  };

  return allLayers

  };

• To get the old value and the new value

  create table test (ID NUMBER,
  Number of REV,
  Number FIELD_ID,
  FieldName varchar2 (200),
  ACTION varchar2 (50).
  Field_value varchar2 (200),
  MODIFIED_BY varchar2 (50).
  Date MODIFIED_DATE);
  
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1007,290,12,'status','UPDATE','revision','2002',to_date('14-DEC-13','DD-MON-RR'));

  
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,283,12,'status','UPDATE','Started','2002',to_date('13-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,224,12,'status','UPDATE','preview','2002',to_date('12-DEC-13','DD-MON-RR'));
  Insert into TEST (ID, REV, FIELD_ID, FIELD_NAME, ACTION, FIELD_VALUE, MODIFIED_BY, MODIFIED_DATE) values (1008,290,12,'status','UPDATE','teststat','2002',to_date('14-DEC-13','DD-MON-RR'));

  1007 283 12 status of started the UPDATE 2002 13 December 13
  1007 224 12 status update overview 2002 12 December 13
  12 290 1007 State review UPDATED 2002 December 14, 13
  1008 283 12 status of started the UPDATE 2002 13 December 13
  1008 224 12 status update overview 2002 12 December 13
  1008 290 12 intensified status 2002 Update December 14, 13

  I need to Get for each id for each field Ineed to get the old value and new_value.

  
  Planned result for the simulacrum of the data is:

  ID FIELD_NAME ACTION OLD_FIELD_VALUE NEW_FIELD_VALUE MODIFIED_BY MODIFIED_DATE
  1007 status UPDATE started review 2002 December 14, 13
  1008 State updated started intensified 2002 December 14, 13

  
  Thank you
  Ann

  Hello

  9728f65c-CE79-4c28-9efb-9e76dc6eaf8b wrote:

  Yes I need a production line for all id.the the last rows should be the one with the highest rev.

  Then use id where I guessed a group of columns starting with id and rev in most of the places where I used modifed_date:

  WITH got_analytics AS

  (

  SELECT id, field_name, action

  LAG (field_value) over (PARTITION BY ID.

  ORDER BY rev

  ) AS old_field_value

  field_value AS new_field_value

  modified_by

  modified_date

  rev

  MAX (rev) over (PARTITION BY id)

  AS max_rev

  OF the test

  )

  SELECT id, field_name, old_field_value, new_field_value, modified_by, modified_date

  OF got_analytics

  WHERE rev = max_rev

  ORDER BY id

  ;

• "the machine virtual source is not recognized" using VMWare Converter stand-alone 4.01

  All,

  Shadow protect IT edition allows us to create backups of image files from our servers. We need the ability to convert files Shadow protect (SPF) in VMWare Server 2.x. files about half of our servers do not convert. We get a message that says: "the machine virtual source is not recognized. What gives? I know image backups are fine because I tested.

  Any help would be appreciated.

  Thank you.

  vmnoob

  We support only a few specific versions of ShadowProtect.

  > StorageCraft ShadowProtect 2.0, 2.5, 3.0, 3.1 and 3.2

  There may be additional restrictions when you attempt to use these types of files, such as the following from the Manual:

  1. dynamic disks are not supported.

  2. all the images in the backup of a machine must be in a single folder, without other images placed there.

  3. for incremental images, so 16 incremental backups are supported.

  4. images of systems with logical drives are not supported if the logical drive is also a system or an active volume

  5. for volume-based cloning, all volumes on the disk until the active devices and the system must be saved.

  5.1 for example, if a drive has four partitions, 1 to 4, with the partition as the active volume 2 and partition 3 as long as the system volume, the backup must include 1 to 3 partitions. (ShadowProtect only).

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• should I get the 32 gig and increase storage icloud or get the 128 gig?

  Should I get the 32 gig and increase storage icloud or get the 128 gig?

  iCloud can't complete really the iPads of storage on board. You can't have apps to run from iCloud, you can't the films played to iCloud, etc...

  If you plan to use more than the 32GBs go for bigger sizes.

• I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent and do every time.

  I have Firefox 8.0.1 and since the update to it, some sites, I need to go so that Firefox will not accept certificates which is accepted in the previous version. I can not get the permanent exception and must uncheck permanent

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

  It is not usually necessary to create an exception for the certificates.
  
  Possible causes are that a server does not send the full (intermediate) certificate chain or self signed certificates.

• Get the Max values and average of the different cycles in the single channel

  Hello

  I'm trying to get the Max values and average of the single channel that has different cycles it contains. I tried to use commands such as Chnclasspeak3 and chnpeakfind, but they were not useful for me. What I need is the Max values and average of the different cycles numbers saved in the data channel.

  Exampld if the string contains 5 numbers of repetitive cycles, then we must find the maximum values and the average of these 5 cycles in the single channel. Attached reference data. This is the .raw file and I have the plugin for it to use in diadem 11.1.

  Kind regards

  X. Ignatius

  Hello, Ignatius,.

  Sorry, it took some time to provide a replacement based on the script for the function. Please take a look at the attached script. I changed the script to use my function if the tiara-version is less than 12. My script function is not as fast and more stable than the implementation of tiara, but for now, it does the job

  Andreas

• How can I get the exact time and date on my FAX LOG

  I have a new HP Officejet 6500 has more on my Dell Inspiron Windows XP computer.  How can I get the exact time and date on my FAX log?

  Hi FrederickFrank7,

  Journal of faxes would just follow the time of your printer. Please set the time and date of your printer.

  I am an employee of HP.
  Please indicate the position that solved your problem as "acceptable Solution".

• Windows XP in IE5 ~ runs slowly, freezes. Get the message: virtual memory is low. Some applications will not work.

  Windows XP in IE5 ~ runs slowly, freezes.

  Get the message: virtual memory is low.

  According to the report of diagnosis of Norton 360: need to upgrade RAM for best performance.

  Need to clean IE (32 MB) & temp of Windows (60 MB) files every day.

  The speed is 5.2 download,.6 upload. Turns fast in 'Safe Mode '.

  What do you do now?

  Thank you

  What Windows XP SP updates are installed.

  Internet Exp [lorer 5 is long it's sell by date!] Why have you not updated to a later not necessarily the latest version of Internet Explorer.

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Norton 360 is a bad choice of security for any computer software but especially so for an old computer. There is a lot more suitable alternatives to freeware.

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• All help & support files have disappeared. I get the message "help and support files cannot start."

  Original title: help & support files

  Windows 7 Professional. All help & support files have disappeared. I get the message "help and support files cannot start."

  How to return please?.

  Perhaps.  An analysis of file system I think would replace the help files, but you can try it, there is no harm.  Just open a command prompt (right click and "open as Administrator"), and then type sfc/scannow

• How to get the battery level and status in the cpp file?

  Hi all

  BatteryInfo class so I can I know how to get the battery level and the State in .cpp class?

  Hi Benecore,

  I have Add method below,

  #include

  But I only variable BatteryInfoPrivate not get variable BatteryInfo. You can also check on your side.

  So let me know how to get batteryInfo instance?

• How to get the friend list and their IDS in the integration of Facebook using Facebook SDK

  can any body send me the code
  How to get the friend list and their IDS in the integration of Facebook using Facebook SDK
  I did after connection and wall

  Welcome on the support forums.

  Please check the strawberry sample that ships with the SDK

• How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?

  You don't, so use the scanning software provided by your device manufacturer, assuming that you have installed the unknown device with their installation cd or the download direct the full version of this site to the

• When I go to a favorite websight how can I get the user id and the password to open the view without having to put in me? Barry was soon

  When I go to a favorite websight how can I get the user id and the password to open the view without having to put in me? Barry was soon

  Hi Barry,.

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  What browser you use on the computer?

  If you are using Internet explorer, I suggest you to follow these steps to turn on the AutoComplete feature and check if it helps:

  (a) open Internet Explorer.

  (b) click on the Tools button and then click on Internet Options.

  (c) click on the content tab.

  (d) under AutoComplete , click settings.

  (e) check the address bar, Forms, usernames and passwords on formsand ask me before saving passwords check boxes.

  (f) click OKand then click OK again.

  Let us know if this can help, and if you need further assistance.