Get white screen

Similar Questions

• PCOIP Dosent work with windows 7 get white screen...

  Hello

  I have a unique problem, seems like I can't run windows 7 using cop, I have two sets of pool one with windows 7 and others with windows XP, I can use PCOIP and RDP on Windows XP, but cannot launch windows 7 via PCOIP, RDP but works very well with windows 7.

  I tried some what not which had been posted in the past...

  (1) uninstalled and reinstalled .net, agent and tools and install them in order of class (Tools, agent, updates)

  (2) reinstalled client on my computer (Version are the same for the customer and agent)

  (3) view ports are open, I can pool PCOIP XP which is hosted at the same place with the same IP subnet, using same VC and composer.

  (4) tried and changed the video RAM of 32, 4, 64 MB on host configured windows 7, also tried setting the host to detect automatically.

  5) went through the newspaper but dosent look some thing bad part only hacked once view client connects it presents a blank screen for a few minutes and the GET one order disconnect according to newspapers...

  JOURNAL of the PCOIP AGENT... (Agent is in PST)

  02/03/10 09:38:25 pcoip_agent_connect_req

  02/03/10 09:38:25 customer's address is 0.0.0.0:50002

  02/03/10 09:38:25 agent GUID = 195a52772e87fe4f84e9012c41d48bb2

  02/03/10 09:38:25 codec = 2.

  02/03/10 09:38:25 launch pcoip_server_win32

  02/03/10 09:38:26 VMWare Launcher code worked.

  02/03/10 09:38:27 waiting for ready message.

  02/03/10 09:38:30 preparing message.

  02/03/10 09:38:30 create mailbox on the server.

  02/03/10 09:38:30 send tag session.

  02/03/10 09:38:30 adding session to the list.

  02/03/10 09:38:30 response connection ok sending.

  02/03/10 09:38:30 (end) pcoip_agent_connect_req: connection_response, 0

  02/03/10 09:38:33 MBX_CON_COMPLETE

  02/03/10 09:38:33 monitor thread: connection_complete: SOFT - MBX_CON_COMPLETE

  02/03/10 09:38:42 mb_send_acknowledgement shipping receipt.

  02/03/10 09:38:42 mb_send_acknowledgement has managed to 00008002

  02/03/10 09:38:47 MBX_CON_CLOSED

  02/03/10 09:38:47 tera_agent_disconnect

  02/03/10 09:38:47 tera_agent_disconnect: connection_closed 2

  02/03/10 09:39:03 pcoip_agent_disconnect

  02/03/10 09:39:03 tera_agent_disconnect

  02/03/10 09:39:03 tera_agent_disconnect found no session.

  02/03/10 09:39:03 pcoip_agent_connect_req

  PCOIP DISPLAY the JOURNAL CUSTOMER :-(customer note is IS so 3 hrs difference)

  12:38:32.273 02 Mar: mks | Journal for vmware-rmksContainer pid = 4300 version = 1.0 Build = build-208495 option = output

  12:38:32.273 02 Mar: mks | The process is 32-bit.

  12:38:32.273 02 Mar: mks | Host codepage = encoding windows-1252 = windows-1252

  12:38:32.273 02 Mar: mks | VDPPLUGIN: cop_client_win32: initializing

  12:38:32.570 02 Mar: mks | VDPPluginHostLoadMKSVchanClientLib: loading mksvchanclient

  12:38:32.570 02 Mar: mks | VDPPLUGIN: mksvchanclient: initializing

  12:38:32.570 02 Mar: mks | MKS recovered target VDP dictionary (unsecured): 10.154.48.15:50002; 195a52772e87fe4f84e9012c41d48bb2

  12:38:32.570 02 Mar: mks | DICT - USER PREFERENCES

  12:38:32.570 02 Mar: mks | DICT - USER by DEFAULT C:\Documents and Settings\hpatel4\Application Data\VMware\config.ini

  12:38:32.570 02 Mar: mks | DICT - HOST by DEFAULT C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini

  12:38:32.570 02 Mar: mks | DICT - SITE by DEFAULT C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini

  12:38:32.570 02 Mar: mks | Msg_SetLocale: HostLocale = windows-1252 UserLocale = NULL

  12:38:32.601 02 Mar: mks | The Protocol Remote MKS is VDP

  12:38:32.648 02 Mar: mks | HOSTINFO 229014313349 @ 3579545Hz-> 0 Hz 1000000

  12:38:32.648 02 Mar: mks | HOSTINFO ((x * 2399728063) > > 33) +-63978609928

  12:38:32.648 02 Mar: mks | WORKER: Create a new group with numThreads = 1 (1)

  12:38:32.648 02 Mar: mks | MKS: Polling of the Base period is 10000us

  12:38:32.648 02 Mar: mks | KHBKL: Impossible to analyze KeyString to: "

  12:38:32.648 02 Mar: mks | VDPPLUGIN: cop_client_win32: the connection to the target

  12:38:32.648 02 Mar: mks | Switching mouse absolute MKS on

  12:38:32.648 02 Mar: mks | VDPPLUGIN: cop_client_win32: successfully connected

  12:38:32.648 02 Mar: mks | Connection to the system of the window.

  12:38:47.694 02 Mar: mks | VDPPLUGIN: cop_client_win32: successful logout

  12:38:47.694 02 Mar: mks | MKS distance disconnected from the server

  12:38:47.694 02 Mar: mks | Removing the system from the window.

  12:38:47.694 02 Mar: mks | VDPPLUGIN cop_client_win32: disconnect request when they are already disconnected. VDPPLUGIN: cop_client_win32: exit... VDPPLUGIN: cop_client_win32: unload to jump and forcing the output.

  12:38:47.741 02 Mar: mks | Remote MKS output.

  12:38:47.741 02 Mar: mks | The forced Plugin VDP output.

  We have tried all other client setting e.g. full screen, multiple monitors etc had been tried, same symptoms, connects white screen and client farm.

  Also tried to remove the notice of the co - op with no luck for the connection.

  Any info would be helpful.

  Thank you

  -HP

  Delete the WDDM driver and replace it with the SVGA video driver

  Located in: C:\Program Files\Fichiers Files\VMWare\Drivers

  http://communities.VMware.com/blogs/gunnarb/2010/02/15/PCoIP-review

  wponder said in one of many threads at this stage.

• Acrobat Connect Pro does not. Get white screen of death.

  When I log in, I get a blank screen of white (below). It started yesterday. Never had a problem before. Past on all browsers on multiple computers. Any ideas?

  

  Reach out using Adobe and see if there is something to do. Acrobat Connect Pro Support

  Are you redirected after you connect?

• APEX 4.2.2 upgrade hanging but now reinstalled still get white screen

  Oracle DB 11 GR 1 material EA
  Linux RHEL 6.3
  APEX 4.1.1-> 4.2.2
  GlassFish 3.1.2
  APEX listener 1.1.4
  =============
  
  Tried to update my APEX of 4.1.1 to 4.2.2 and lost my session/connection of terminal. The result was that the upgrade was clinging to the status "REVALUATION".
  Decided to remove the APEX 4.1.1 and reinstall from zero APEX 4.2.2. No problems in the newspapers and the State now "VALID".
  Images copied to the Glassfish server - and even the database using @apxldimg.
  Problem:
  
  I think to connect at the APEX, but get a "blank" screen (web page). Still using 'old' APEX earpiece and modernize to 2.0.1.
  
  Any suggestions?

  Figured it out.
  =========
  When I initially copied the images I used (directories are anonymized below for security):

  rsync - number/home/images/home/glassfish/docroot/i /.

  and apparently it doesn't work or I had a typo in, because when I tried and then

  cp - rf/home/images / /home/glassfish/docroot/i / *.

  everything has come - no more blank screen.

• White screen on Toshiba virtual store - account 33090

  Hello

  I have created a personal account Toshiba today and after updating the app, I get white screen.

  Help, please... Personal account is 33090
  Thank you.

  Thank you for the request.
  Your virtual shop Toshiba 33090 account has been reset.

• Satellite L300D-110 - white screen and continue to restart

  Hello

  I have a L300-110, this just started to happen when I turn on the laptop light power green lights then get white screen but if continue to restart the laptop starts to work again.

  Can anyone help?

  Hi thm1ele,

  You can access the BIOS or see something on an external monitor?

• White screen in mapfield after zoom in

  Hi all

  I am getting white screen in mapfield after zoom in...

  I tried to move the latitude and longitude of the mapfield, I used to open the mapfield.

  Any idea.

  Hi M Sohm, thanks for the answer...

  Use the BB 9000 "BOLD" and S/w version is 4.6

  The issue that I was facing is now resolved. It was because of the null pointer exception. I use Bitmapfields, to draw locations. When to perform a zoom or pan down, then the x, position y fields become a negative value. so I have limited drawing markers, that are out of the display area...

  Thanks M Sohm for answer...!

• Computer laptop white screen at startup

  A few days before, at a bend on a laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service. What are the possible causes for this problem?

  Hello Pierre,.

  Thank you for using Microsoft Community.

  1. does the computer boot to the desktop, or you see the white screen on startup of the computer?
  2 did you change on your computer?
  3. What is the brand and model of the laptop?
  4. as you mentioned, "when you turn on your laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service ', what exactly happens when you start the computer?

  If you get white screen SAT after the start of the desktop, then I suggest you follow this article and check.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Please answer with results so that we can help you further.

  Thank you

• What is missing when I get a white screen empty when I try to access certain web sites?

  On some websites, I get a blank white screen when I try to access it.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How can I get rid of a white screen is displayed for 3 seconds at startup

  Since my last update of Thunderbird to 31.3 I get a white screen for 3 seconds when starting and until I see my files.
  I use Thunderbird to access Yahoo.co.uk and 2 accounts Outlook.com .
  All plugins are disabled.
  I have an extension, CompactHeader 2.0.9, which I removed, but the problem remains. I have now reinstalled.
  I uninstalled and reinstalled Thunderbird - problem just the same.
  If I boot in safe mode, there is no white screen, it normally loads directly to folders.
  I don't know what to try next any suggestions are welcome.
  See you soon

  OK - I tried to disable addons and themes, I've also uninstalled and reinstalled without addons or themes.

  However - Thunderbird just did an update and the problem seems to be resolved!

• After have logged you on you yahoo this am, my calendar and Notepad have disappeared. When I click on it I just get a white screen. I'm not very computer and need help getting them back.

  When I usually go in the mail from yahoo, there are an icon on the upper left side to access my calendar and a Notepad. They are both gone, but there is a field in the lower left corner that has the buttons. When I click on one or the other, I just get a white screen. I have not updated to Firefox to a new version and can't imagine what happened during the night.

  It sounds more as if it was a temporary problem with the site Web of Yahoo mail. At this point, my advice is to see if this gets fixed in a few hours. If not, please come back (in fact, FRY without worrying and let us know if your problem is resolved).

• I went to upgrade to El Capitan, it was last night. I have a blank white screen. I tried to turn off my computer, but when I turn it back on all that I get is a status bar that shows its about 3/4 downloaded and then it goes back to a blank white thyristo

  I tried to download El Capitan. Has started last night. all I have is a blank white screen. I stop my computor waited awhile and he turned his back. I work around a status bar indicating that it is about 3/4 full, then it goes back to a blank white screen?

  I had this problem too on my iMac (21.5 inch, late 2009) and I tried to restore to the previous version and then do the update again, but I got the same results.  I also tried to reinstall OS X option of the application of the utilities on the recovery disk that took a few hours but got the same results.  Finally, I tried to restart and make a secure boot (hold down the SHIFT key when the bell rang and rejection when the Apple shows up) and I was able to get the computer to boot.  When I logged in a window pops up saying "Complete Installation" and still had 6 min.  When he finally finished, I was an able to connect as usual and everything works fine now.   My mid 2009 Macbook Pro has no problems with the update but my iMac has been a pain.  I hope this helps you and anyone else who may have this problem.

  iMac (21.5 inch, late 2009)

• I get a blank white screen popping up, I do alt f4 but he returned

  I get a blank white screen popping up I do alt f4 but it comes back

  Hello

  1. Once you get this white screen?

  2. What is the operating system of your computer?

  Provide more information to solve the problems on this issue. Refer to article How to ask a question: http://support.microsoft.com/kb/555375

  Step 1:

  Try to start the computer in safe mode and check if it works fine. To start the computer in safe mode, follow these from the link: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode (also valid for Windows7)

  Step 2:

  If it works well and then start the computer at startup clean and check: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• After that Windows update restarted as requested, by getting only now white screen

  After that Windows update restarted as requested, by getting only now white screen.

  Unable to set up windows

  I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

• After the charge of the desktop, I get a white screen and can't do anything.

  After the charge of the desktop, I get a white screan and can't do anything. It keeps loading of other programs with just the white screan. When I hit CTRL ALT DELETE, my office appeared then disappeared. What can I do?

  Hi David,

  You meet a white screen on startup.

  Step 1: Check if the problem persists in safe mode

  A description of the options to start in Windows XP Mode

  Step 2: If the problem not in safe mode then put the computer to boot.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  Hope this information helps.