Satellite L300D-110 - white screen and continue to restart

Similar Questions

• Satellite L300D-13s - black screen and nothing appears

  Hi, I have Toshiba Satellite L300D-13 s (pslc8e-02p013en).

  I turned off my laptop as usual and when trying to turn it back on yesterday, I have NO screen. I can here it whirring and all my lights are on, my battery is showing green (paying), but all I have is a black screen, no markers, imprecateurs, whatever it is?
  Have I somehow turned off the screen?

  I was in battery saving mode if it has nothing to do with it at all?

  PLEASE HELP - I DON'T KNOW WHAT TO TRY

  Thank you

  Hey,.

  Normally the battery saving mode (stand-by) has nothing to it. On my Satellite L300, it works correctly and I often use this mode.

  In any case, it would be interesting to know if you can see an image on an external monitor. The internal monitor FL inverter is may be defective and so it does not show an image... Who knows? ?:|

• Satellite A200 - white screen and gel

  Hi Experts,

  I have this machine for 2 years. It was no problem. Last month, he began to display a white screen, and at the same time, it has been frozen after 3-4 hours running. Push the power button to restart, it fozen soon. I replaced a new fan and cleaned the dust inside. But the problem is still there. Someone has ideas what is the problem?

  Thanks in advance.

  Hello

  The issue appears only after a long period of use is good?
  Eventually the higher temperature affects the graphics chip.
  The question would appear again until the graphics chip to cool
  This is my theory
  What do you think about this?

  It could also be a RAM problem anything is possible and that is why each part must be verified
  In your case, I recommend you to contact a technician for laptop. The guys could check the parts. I mean it of better to check the hardware, then replace only the defective part rather than buy parts and hoped that the replacement would solve the problem.

  But listen buddy; If the graphics card chip is really affected then replace the motherboard and this could be a costly affair!

• Satellite M70-340 - white screen before windows loads

  I have istalled a new Windows XP on my laptop Satellite M70-340, and after having installed the drivers and the Quick Fix Engineering I restart the laptop...

  The laptop is the auto start and it stopped just before starting the loading (white screen and no disc HARD answer stopped - HDD led lighting-)
  I am able to get into the BIOS and change the boot order.

  I boot from the recovery cd, but it is is stopped with the same blank screen just before his screen should start.
  I boot from the Windows cd, but it is is stopped with the same blank screen just before the blue screen should start.

  I unplugged the battery and pluged in again and the problem continues to be.
  I have restored the defaults in the Bios, but it didn't work.

  Please help me

  You see the Toshiba start screen at the beginning of the boot process?

  I searched this forum for the same problem on M70 but I found nothing didn t.

  But I do remember that one of my friends had a similar question. If the adapter has been unplugged the system locked and the screen is dark.
  It has fixed in powerplay disable in the ATI graphics settings and it didn't put the CPU low speed in Toshiba Power saver mode fixed.

  But like I said this happened only together running the operating system without the AC adapter.

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

  Try to do these steps, it should help:

  1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

  2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

  3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

  4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

  5. return to the home screen and open whatsapp.

  6. go in the settings, press Whatsapp and turn back.

  7. open whatsapp again. It should work now.

• my XP is not booting (white screen) and crashes at isapnp.sys then in safe mode.

  My XP Home Edition is not booting (white screen) and crashes at isapnp.sys then in safe mode. Please help as soon as possible because I need this platform for school!

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The symptom often means that your system is of a malicious software.

  With this particular symptom of hanging on isapnp.sys in Mode safe is to search for a driver of zero-byte length file in the c:\windows\system32\drivers folder.

  Of course, you have to boot the system on something in order to access the hard drive to find the suspicious file and get rid of it.

  If you have any installation CD bootable XP real where you start in the XP Recovery Console, or you are not sure what type of bootable CD, you have,
  make a CD of bootable XP Recovery Console or Hiren Boot CD and don't forget.

  There is no XP media needed to make a Hiren Boot CD or a bootable XP Recovery Console.  You can access the folder and check if
  There is this action suspect file and take.

  Once you're booted to the CD of your choice, navigate to the following folder (assuming that XP is installed on your C volume):

  c:\Windows\System32\Drivers

  Looking for a file that ends with an extension .sys and zero bytes in length.  The file can also have a curious name because she may have been generated at random.

  If you are in the XP Recovery Console, issue the following command in the c:\windows\system32\drivers folder:

  dir *.sys

  Files Scrolls one screen at a time.  Look at the list of files with .sys extensions and their lengths.  You don't need to
  worry about directories...  If you see a file with a .sys extension which is zero byte, it is suspect.

  If you use just the Mini XP Mode a Hiren boot CD (which works as Office XP), navigate to the folder of the my
  Computer desktop icon and locates the suspect files.

  You really want to remove the suspicious file once you get running and you run some scans for malware, but if you are
  not sure what is the suspicious file or if it might be necessary, just rename the suspicious file for now, in case you are not sure.

  For example, if you find zigxrtml.sys folder had a length of zero byte, rename it:

  Rename zigxrtml.sys zigxrtml.bad

  Renaming or removing the suspicious file to get the system running is not resolved the problem.  It is the symptom of the problem.

  The problem is your system is infected by malicious software and you should always follow up with a few scans to remove infections.

  Once your system is running, followed with MBAM and SAS to be sure that the affliction has really been removed.

  Reduce the risk of malware by running some scans.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  The scans by operating clean, restart, test your task manager and we can repair any other pending issues.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• Satellite - black screen and can't restart with the recovery disk

  I have a black screen and can not restart with the restore disc but it seems to be.

  I find this odd, I can't ask Toshiba direct on my problem, but I have to wait for one nature in the heart of my problem or give me a helping hand

  Hey,.

  This means that you can see anything on the screen of the laptop or only if you try to start with the recovery disk?
  You can start Windows or access the BIOS?
  You must post a few more details, otherwise we can t help you :(

  Furthermore, Toshiba is not your first contact, you should ask an authorized service provider. They can help you too! :)

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• White screen and beeps when turn on Satellite 3000 X 11

  Can anyone help? A couple of times in recent weeks my Satellite 3000 X 11 itself has turned off. However, it then displays a white screen when I turn it on and 3 beeps followed by 3 beeps of x x. The power led & battery lights on and the hard drive flashes once - fan does not work - it happened to someone else? Or can someone suggust cause and remedy? Thank you
  Tim

  HI Edward,.

  Beep codes are indications that the unit doesn't have his POST processing. The exact cause can only be diagnosed by a qualified Toshiba service agent.

  In regards to your hard drive, will find it this located below your optical drive that must be removed first. Remove the screw (F5) the appliance and slide the optical drive before that. You will then be able to access the hard disk.

  Kind regards

• Satellite P200D-139 suddenly goes to blank screen and must be restarted

  Hallo,
  Have a Toshiba Notebook: Satellite P200D-139. Just reinstalled vista (because the phone was slow and glitch) and the computer has just only started going to a white screen at random, no error reports... nothing.

  Works fine, once it has been rebooted, restored in safemode, updates not installed... but ran ideas.

  Would be grateful for the help, thanks.

  Hmmm. my laptop s screen was empty, sometimes after the activation of the standby mode.
  But after restarting again, everything was OK.

  I searched a bit in the forum and found people who recommended a BIOS and update the display driver.
  I did this and could solve my problem

  I'm, not sure if this would be useful but try this too
  It s worth a try

• BlackBerry smartphone White screen and hour glass, can't do anything

  Occasionally by BB has a white screen with an hourglass, the latter for a few minutes

  It the first time I tried it turn off, which did not help, so I removed the battery and turn on the power, and he returned to the white screen with the hour glass.

  So I thought that maybe this is a update being pushed by Verizon or BB, couple of days later I plug my BB to USB for laptop and check the updates of BB, nothing there, OK. So I tried Verizon update, you know what number that your call and it ask you if you want to update your phone (don't remember what it is right now)

  Someone else has had this, are there any patches?

  Thanks in advance for your help

  Bulisani,

  Sorry for the problem with the hourglass and display...

  Each unit of a battery pull restarts, the screen will appear empty for about 1-2 minutes during startup.  If you load ok and continue to have the hourglass appearing frequently, there may be a somewhenre of files sorrupted who maintains the processes that the BB must load - not 100% sure, but if there is a corruption, you might want to consider your phone by using the Fund mgr and performing a master handheld wipe (backup options security options (gen settings, touch menu and then select wipe Handheld)

  When restore you... A full recovery can restore the corruption on the phone, so...

  There is an advanced Fund mgr backup/restore option allowing you to restore specific databases such as Contacts, calendar, etc...

  BTW... the more - the number of programming made up air is only to update your device with VZW towers, dealing with mainly the roaming capabilities and the # * 228.

  I hope that helped you!

• a white screen and then the application crashes

  When I go to my iPhone mail app, there is just a white screen. Sometimes after a few seconds, the application crashes. I can't delete the app because it seems to be "built in". My mail works fine on the MacBook Pro and iPad. I tried all the suggestions on the forum.

  1. Warm reboot
  2. Toggle the settings of the aircraft
  3. Supprimer delete accounts, and then add them again
  4. Recover from a previous backup
  5. Hard Reset then retrieve

  Nothing effects mail app it seems be frozen piloted to white, so double-click on the "home" button I see the screen of e-mail in the list, but it is old age and if I select mail it displays the old page but all frozen. How can reset my mail without going through the whole hard reset, process to recover again everything seems to work.

  Update to iOS 9.3.2.

  Reset your network settings. Power cycle your iDevice.

  This should help.