GetCommand does not return my configuration of entry points?

Similar Questions

• VISTA computer does not start until "STOP: 0xc0000139 {Entry Point not found}".

  Original title: computer VISTA will not start

  I get this error when you try to start my vista 32 bit

  blue screen with:

  Stop c0000139 (entry point not found)
  Wcsncpy_s procedure entry point could not be located in the dynamic link library ntdll.dll.

  tried to start in every mood and nothing works. Help, please

  Hi Ad-HocHelp,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Run the Startup Repair tool, follow the steps mentioned in the link below to access the system recovery tools.
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Run query does not return a lines

  Hello

  I find that the Executequery code does not return everything.

  {

  pageContext.writeDiagnostics (this, "connection entry-front connection", 1);

  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();

  pageContext.writeDiagnostics (this, "connection entered" & conn, 1);

  pageContext.writeDiagnostics (this, "input connection [AJ]" & conn, 4);

  Dim Query = "select CODE a.secondary_uom_code, (select b.unit_of_measure from MTL_UNITS_OF_MEASURE b where b.uom_code = a.secondary_uom_code) GLU, xxtmxc_primary_selling_suom (: 3, a.inventory_item_id) ' PSUOM from mtl_system_items_b where a.inventory_item_id =: 1 and a.organization_id =: 2 and a.secondary_uom_code is not null ';"

  'UNION select 'OUR' CODE, UOM 'Number', 10 double PSUOM;

  String query = "" select secondary_uom_code CODE of mtl_system_items_b where inventory_item_id =: 1 and organization_id =: 2 and secondary_uom_code is not null '; "

  pageContext.writeDiagnostics (this, ' [AJ] after the query string", 4");

  pageContext.writeDiagnostics (this, "message query" + Query, 1);

  PreparedStatement stmt = conn.prepareStatement (Query);

  pageContext.writeDiagnostics (this, "prepared statement Post" + stmt, 1);

  stmt.setString(1,Item);  ver1

  stmt.setString(2,Org);  ver1

  stmt.setInt (3, Dis.intValue ());

  stmt.setString(3,Dis);

  stmt.setInt (3, Ext.intValue ());

  stmt.setString (3, Ext); ver1

  pageContext.writeDiagnostics (this, "Post Ext after SetString" + Ext, 1);

  ResultSet resultset = stmt.executeQuery ();

  pageContext.writeDiagnostics (this, "Resultset" + resultset, 1);

  If (resultset.next ())

  for (ResultSet resultset = stmt.executeQuery ();)

  ResultSet.Next ();)

  While (resultset.next ())

  {

  String code = resultset.getString ('CODE');

  String uom = resultset.getString ("UOM");

  String psuom = resultset.getString ("PSUOM");

  row.setAttribute ("UomCode", code);

  row.setAttribute ("UnitOfMeasure", GLU);

  row.setAttribute ("LineAdjustedPercent", psuom);

  pageContext.writeDiagnostics (this, "secondary UOM" + resultset.getString ('CODE') + resultset.getString ("UOM") + resultset.getString ("PSUOM"), 1);

  pageContext.writeDiagnostics (this, "secondary UOM" + row.getAttribute ("UomCode") + row.getAttribute ("UnitOfMeasure"), 1);

  pageContext.writeDiagnostics (this, "LineAdjustedPercent" + row.getAttribute ("LineAdjustedPercent") + "PSUOM" + resultset.getString ("PSUOM"), 1);

  }

  ResultSet.Close ();

  stmt. Close();

  }

  catch (SQLException sqle)

  {

  throw new OAException ("error in query Preparation" + sqle, OAException.INFORMATION);

  }

  pageContext.writeDiagnostics (this, ' [AJ] after try-catch: ", 4");

  }

  }

  }

  }

  Hi Bobo,

  I tried the same requirement in my local instance and changed the code for you.

  Please check process requires working Code of the form below:

  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  OAViewObject QuoteLinesLevel70VO1Obj1 = (OAViewObject) pageContext.getApplicationModule (webBean) .findViewObject ("QuoteLinesLevel70VO1Obj");
  if(QuoteLinesLevel70VO1Obj1!=null)
  {
  If (QuoteLinesLevel70VO1Obj1.GetCurrentRow ()! = null)
  pageContext.writeDiagnostics (this, "Current Row" + QuoteLinesLevel70VO1Obj1.getCurrentRow () .getAttribute ("UomCode"), 1);
  }
             
  pageContext.writeDiagnostics (, "concluded Save Button", OAFwkConstants.STATEMENT);
  If ("Event.Go".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)))
  {
  OAViewObject QuoteLinesLevel70VO1Obj = (OAViewObject) pageContext.getApplicationModule (webBean) .findViewObject ("QuoteLinesLevel70VO1Obj");
  if(QuoteLinesLevel70VO1Obj!=null)
  {
  pageContext.writeDiagnostics (thie, 'enter in Count' + QuoteLinesLevel70VO1Obj.getFetchedRowCount (), 1);
  int count = QuoteLinesLevel70VO1Obj.getFetchedRowCount ();
  RowSetIterator Iter = QuoteLinesLevel70VO1Obj.createRowSetIterator ("Iter");
  {if(Count>0)}
  Iter.setRangeStart (0);
  Iter.setRangeSize (count);
  for (int i = 0; i)<>
  {
  OAViewRowImpl row = (OAViewRowImpl) Iter.getRowAtRangeIndex (i);
  If (row.getAttribute ("InventoryItemId")! = null & row.getAttribute ("OrganizationId")! = null)
  {
  String Item = row.getAttribute("InventoryItemId").toString ();
  String Org = row.getAttribute("OrganizationId").toString ();
  Number say = (Number) row.getAttribute ("LineAdjustedPercent"); LineAdjustedPercent
  Dim Ext = (String) row.getAttribute ("Attribute1");
                            
                             int item1 is Integer.valueOf (Item) .intValue ();.   Converted entire string
  int Org1 is Integer.valueOf (Org) .intValue ();.     Converted entire string
  Try
  {
  pageContext.writeDiagnostics (this, "connection entry-front connection", 1);
  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();
  pageContext.writeDiagnostics (this, "connection entered" & conn, 1);
  pageContext.writeDiagnostics (this, "input connection [AJ]" & conn, 4);
  String query = "select xxtmxc_primary_selling_suom(:1,a.inventory_item_id) PSUOM from mtl_system_items_b where a.inventory_item_id =: 2 and a.organization_id =: 3"; Index link //Changed
  pageContext.writeDiagnostics (this, ' [AJ] after the query string", 4");
  pageContext.writeDiagnostics (this, "message query" + Query, 1);
  PreparedStatement stmt = conn.prepareStatement (Query);
  pageContext.writeDiagnostics (this, "prepared statement Post" + stmt, 1);
                                  Item1 is Integer.valueOf (Item) .intValue ();. Converted entire string
  ORG1 = Integer.valueOf (Org) .intValue ();  Converted entire string
  pageContext.writeDiagnostics (this, "Param1 all" + item1, 1);
  pageContext.writeDiagnostics (this, "Param2 all" + Org1, 1);
  pageContext.writeDiagnostics (this, "Param3 all" + Ext, 1);
  stmt.setString(1,Ext);
  stmt.setInt(2,item1);  ver1
  stmt.setInt(3,Org1);  ver1
  pageContext.writeDiagnostics (this, "Post Ext after SetString" + Ext, 1);
                                  
  for (ResultSet resultset = stmt.executeQuery (); resultset.next ();)  //Used for loop in Resultset
  {
                                     
  String psuom = resultset.getString ("PSUOM");
  pageContext.writeDiagnostics (this, "[AJ] z:" + psuom, 4 "); //Here we got the value of the function
  pageContext.writeDiagnostics (this, "m [AJ]:" + Ext, 4);
                                      
  }
                                  
  stmt. Close();
  }
  catch (SQLException sqle)
  {
  pageContext.writeDiagnostics (this, ' [AJ] with the Exception: "+ sqle.getMessage (), 4");
  throw new OAException ("error in query Preparation" + sqle, OAException.INFORMATION);
  }
  pageContext.writeDiagnostics (this, ' [AJ] after try-catch: ", 4");
  }
                            
  }
  }
                   
        
  }
           
  super.processFormRequest (pageContext, webBean);
  }
  }

  Thank you

  Dilip

• When I return from the page of google search for a link then button does not return return

  When I return from the page of google search for a link, then button does not return back. Instead, the same page refills. I need to go back click back button twice or even more. How to fix? I cheked it it another browser and there is no such behavior. It seems completele Firefox problem.

  the problem was resolved after remooving extenshion «user agent overrider»

• HP 640 c: HP640c cartridge does not return to its original position and the printer will be no print anything

  Printer cartridge does not return to its original position on the right side of the printer after the top cover is opened, with the resume light continues to Flash.

  After restarting the printer, the cartridge moves to the right, but not all the way and remained there when the printer is off.

  The printer will not print anything.

  How can I get the cartridge is positioned correctly?

  Solved the problem... it's a defective color print cartridge, which was the carrage Act strangely.

• Screen turns black and does not return. One stop forced

  When I leave my computer for a while, the screen turns black and does not return when I press 'enter', or any other key.  I do a forced shutdown (turn off with the power button).  Can I get, and the "incorrect closing" message when I turn on computer. I think that it is a problem of Hibernate.  Any ideas?.
  MMM

  Original title: hibernation problem?

  What happens if you press Ctrl + SHIFT + ESC when you want to get out of hibernation?

  You use a wireless keyboard and mouse with a transponder. What happens if you press the button on the transponder?

• PC Windows 7 does not return the document or the printed page

  I had a setting for this in XP control but can't find the page, that I got it.

  This occurs in AN application, or a browser.  I print from a workbook Excel specific, for example, when I have a number of them opens.  The system does not return the workbook that I printed.  It's maddening and causes all sorts of questions.  Searching the Web for this instant product nothing and I know I can't be the only person who saw this.

  It is a platform of Windows 7 in a commercial network environment.  I use the snap Menu Addintools classic because I can't stand the Ribbon and never loved.  In Windows 7, I run a couple of other supplements that restore the XP the taskbar properly use, so you can work efficiently.

  None of the supplements are causing this problem because I was running the same classic Menu Add-in in the XP box and he had the same problem until I found workaround that I don't remember now.

  Everyone knows about this problem?

  Jeff Lynch

  Hello Jeff,.

  Please contact the Microsoft community.

  As the Windows 7 computer is under the corporate network environment, the issue that you are facing is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forum.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Hope the information above has been a useful answer, Mercia back to us if you respect them more.

• Network type changes 'Public' and does not return to work when the default gateway is detected

  Original title: Type of network not restored on ethernet cable reconnect.

  I have a Dell Precision R5500 running Windows 7 Professional Service Pack 1. It is connected to a network that is stored as a type of 'work '. When the ethernet cable is removed and replaced network type changes to 'Public' and does not return to work when the default gateway is detected. I also have a Toshiba Tecra M10 running Window 7 Professional Service Pack 1 that initially detects the network restored as 'Public', but 'Work' once again Exchange is a connection to the default gateway. Is there a setting somewhere in the strength of the network to double check its type periodically?

  Hello

  You have any other network assets wireless (specifically) running on the computer?

  Have another active network connection could also cause this.

  Allows us to follow the methods mentioned below and see if they help.

  Method 1: Run the network troubleshooter.

  When the network type gets changed to 'Public' after the cable is disconnected and reconnected. The troubleshooter should let you know if there are errors with the associated services.

  See the following article:

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  
  Method 2: check if network discovery and file sharing options are enabled in the network and sharing Center.

  See the following steps:

  a. click on start toreduce this top, type network and sharing Center in the Start Search box, and then click network and sharing Center in the programs list.

  b. If network discovery is off, click the arrow to expand the section, click turn on network discoveryand then click apply.

  Reduce this includes this imIf that you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. If file sharing is off, click the arrow to expand the section, click turn on file sharingand then click apply.

  Collapse this includes this ima

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  
  Method 3: Uninstall the network drivers and then install the last set of drivers on the manufacturer's Web site and check the issue.

  See the following steps:

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the network adapter, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path on ESXi 5.0 u1

  Hello

  Below for the output of my blade IBM HS22., are there any problems with the configuration of the path.

  List of paths esxcli storage nmp
  SAS.5005076b08b7aaa4 - sas.a9501097faba7a - naa.600508e0000000007abafa971050a900
  The Runtime name: vmhba0:C1:T1:L0
  Feature: naa.600508e0000000007abafa971050a900
  Full device name: FREE Serial Attached SCSI (naa.600508e0000000007abafa971050a900) drive
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_LOCAL does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  FC.2fff0000c900009f:2ffd0000c900009f - fc.500507680100 b b 680 680:500507680130 - naa.60050768018105afc000000000000df0
  The Runtime name: vmhba2:C0:T3:L2
  Feature: naa.60050768018105afc000000000000df0
  Full device name: disk of IBM Fibre Channel (naa.60050768018105afc000000000000df0)
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  Kind regards

  Surya

  Hi Surya,

  No, it's not any problem with the configuration of your path.

  It only means that this policy does not allow additional configuration.

  I.e. with fixed NMP, you would be able to configure a preferred path allowing you to manually distribute the i/o load.

  Your current configuration does not offer this option.

  Kind regards

  Ralf

• ctxrule - match does not return a result

  v.11.1.07 - I created a ctxrule index as described below. However, although a query must match on the given document, it does not return. Any ideas?
  

  begin
  ctx_ddl.create_preference('ot_lexer', 'basic_lexer');
  ctx_ddl.set_attribute('ot_lexer', 'index_stems', 'ENGLOSH');
  end;
   
  begin
  ctx_ddl.create_section_group('ot_sec_group', 'auto_section_group');
  end;
   
  create table ot_profile_test
  (profile_id number,
  query clob);
   
  create index ot_profile_rule_ndx on ot_profile_test(query)
  indextype is ctxsys.ctxrule parameters
  ('stoplist ctxsys.empty_stoplist
  section group ot_sec_group
  lexer ot_lexer');
   
  insert into ot_profile_test values(1, '($apple and $pear) and (1 within food)');
  commit;
   
  exec ctxsys.ctx_adm.set_parameter('log_directory', '/yourdir');
  exec ctx_output.start_log('ot');
  exec ctx_output.add_event(ctx_output.event_index_print_rowid);
  exec ctx_output.add_event(ctx_output.event_index_print_token);
  exec ctx_ddl.sync_index('ot_profile_rule_ndx', '2040M', null, 1, null, ctx_ddl.lock_nowait_error);
  exec ctx_output.end_log;

  Then, run a query:
  

  declare
  a clob := 'apple orange pears banana
  <metadata>
   <indicators>
     <food>1</food>
   </indicators>
  </metadata>
  ';
  vn_profile_id number;
   
  begin
   
  select profile_id into vn_profile_id
  from ot_profile_test
  where matches(query, a) > 0;
   
  dbms_output.put_line(vn_profile_id);
   
  end;
   
  ERROR at line 1:
  ORA-01403: no data found
  ORA-06512: at line 8

  Profile_id = 1 should not be returned?
  
  
  In addition, the log file should not have 2 lines written in $I?
  WRITING APPLE: ((PEAR) TOKEN = (PEARS)) * ((1) IN FOOD), 0
  WRITING APPLES: ((PEAR) TOKEN = (PEARS)) * ((1) IN FOOD), 0

  As noted earlier, you must use a list of words, not a lexer to control, like the two conflicts between them. All what you need to do is remove the following line from your code:

  ctx_ddl.set_attribute ('ot_lexer', 'index_stems', 'ENGLISH');

  You can still have a lexer with other attributes; Just do not set the attribute index_stems to the lexer. Set the attribute generator of forms derived from the list of words only.

• sys_context procedure does not return an ip address

  Hello
  
  
  DB 11 GR 1 material
  
  What would be the reason for which this query does not return an IPAddress?
  
  Select sys_context ('userenv', 'IPAddress') of double;
  
  Thank you

  What would be the reason for which this query does not return an IPAddress?

  USERENV does not know what the IP # is.

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select sys_context('userenv', 'ip_address') from dual;
  
  SYS_CONTEXT('USERENV','IP_ADDRESS')
  --------------------------------------------------------------------------------
  

  Maybe it's because you are connected locally & not via SQL * Net

  Published by: sb92075 on October 27, 2010 12:53

• Model of savings: it does not save the configurations of margin

  I am trying to save a document as a template, to save my master page and styles. But when I save it it does not save the configurations of margin. The document a. 875 "margins left and right, but when I save the document as a template, it saves the margins left and right 1". I have adjustments to market. Do not know what to do...

  That's ok. That's how we learn better - try something and see why it does not work.

• My canon printer mx420 does not see my router to access point

  My canon printer mx420 does not see my router to access point. What can I do about it.

  Hello Rick,

  I went online on the website of Canon, and there were 25 games for "printer sees router access point; you might want to try this page: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx420?CMD=MIXED_SEARCH&mName=PIXMA+MX420&mType=PIXMA+MX&pageKeyCode=ekbresults&searchString=doesn't+see+router+access+point&BASIC_SEARCH_CURRENT_TOPIC_ID=1076&BASIC_SEARCH_CURRENT_TOPIC_TYPE=0&RESULTS=RELEVANCE&RELEVANCE_START=1&RELEVANCE_COUNT=25&CONFIGURATION=1011&PARTITION_ID=1&TIMEZONE_OFFSET=null&USERTYPE=1&isSecure=false .

  If you have no luck after visiting the Canon site, post back here with what you tried, and we'll go from there. I hope this helps you.

  Kind regards

  BearPup

• After Effects does not open error message citing "mount point list is empty.

  After Effects does not open error message citing "mount point list is empty.

  FAQ: Should what information I provide when you ask a question on this forum?

• "back" button does not return me to the area I have left in the search list

  I use version 7.0.1 of Firefox on a laptop with XP SP3. All known updates have been applied.

  I use google to search for a topic and a list of results from site. After selecting one of the conclusions, I click on the back button, I went back to the list, but my 'space' in the list does not exist and I have to look through the list to see where I was while I can click on the following entry to find.

  I don't think that something has changed in this regard in a long time for the research.

  What I would say is that you're doing the research itself open in a new tab, and each of the search results open in new tabs in this way you know when you are finished using a tab, and you will not lose your place in the search results.

  Use the keyboard shortcut to open the results of a search in a new tab in the background, so that you can keep looking at Google results before looking at the tabs you open from the research.

  Google options (gear) at the top right, and then down 'search settings ':

  [x] search results open in a new browser window.

  Firefox tools > Options > tabs

  [x] open new windows in a new tab instead.

  Then, in Subject: config (typed in the address bar)

  Browser.Search.openintab user set to true

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  More information about the configuration variables available in
  topic: config entries and for users who do not know the process, there is Subject: config (how to change).

  From a Google search, you should have the pages open in a different tab, but with Google that is not good enough, because they have open all in the same tab, as you have noticed if you have done this.

  • Find and replace special shortcuts for Firefox users
    http://dmcritchie.MVPs.org/Firefox/search.htm

  You can use Ctrl + click or Ctrl + Shift + click to open a link in a new tab.

  • Firefox and other shortcuts of the browser (comparison table)
    http://dmcritchie.MVPs.org/Firefox/keyboard.htm

  You can use app-tab to pin the tab, click the tab and choose pin - tab and conversely to unpin tab or remove the tab when finished.

  You will find interesting reading of the tabs in

  • Navigation tabs in Firefox
    http://dmcritchie.MVPs.org/Firefox/tabs.htm
  • Configuration of the tabs, extracted about: config entries - MozillaZine Knowledge Base
    http://dmcritchie.MVPs.org/Firefox/tabs_config.htm
  • 001 ability Test tab
    http://dmcritchie.MVPs.org/Firefox/tab_capacity/001_with_underscore.htm##
  • Colors tab highlighting active/read/not read (Fx3.6) - themes and skins for browser - userstyles.org
    in fact colors all borders not only a feature of underscore - see photo in the minimum size bar tabs
    http://userstyles.org/styles/24728
  • Tabs, enlarge the list-all-tabs button - themes and Skins for browser - userstyles.org
  
  http://userstyles.org/styles/18553
• Minimum size of tab bar - themes and skins for browser - userstyles.org
  http://userstyles.org/styles/9043