getSystemPropery in OSB

Similar Questions

• Satellite M40-331 - missing the logo of the OSB on the first screen

  Greetings,

  When I try to activate my Satellite M40, I have this message on the first screen: "the Bad/missing OSB Logo. What can I do?

  Thank you

  Hey,.

  I really never heard logo OSB...
  Can you explain what you mean exactly, or what it is?

  Is the BIOS logo or what?

• Satellite M45 - logo error bad/missing OSB

  Hello...

  I'm having a serious problem with my laptop

  When I turn on my computer, the toshiba logo appears with an error message in the upper right corner that says: missing/Bad OSB logo.
  And that is, the computer has frozen, I can not even access the bios...

  Could plese someone help me?

  Thanx

  Hi Kelly,

  The logos of the BIOS stand on the CMOS chip on your motherboard, your display will show an error message may indicate that you CMOS chip has developed a fault which needs to be re-flashed the BIOS. If you are unable to get the OS to load after the BIOS screen, you get the BIOS flashed by a Toshiba authorized Service partner.

  You may also like to try = pass the screnn LOGO by pressing the ESC key as soon as you pressed the power button. This should show that then it the BIOS load progress.

  Kind regards

• Satellite M45 - Missing/Bad OSB logo at startup

  When I turn on my Satellite M45, everything he says is missing/Bad OSB logo.
  I press ESC and still it does nothing.

  What should be my next step?

  Hello

  I found this thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18060
  CA? s very similar to your question.

  It seems that your CMOS chip where the BIOS is stored has developed a fault.
  In order to solve this problem, the BIOS must be re-flashed

  But BIOS reflash can only happen if you can not access the OS. If you are in an uncomfortable situation and only a Toshiba ASP could help you.

  Contact the guy and ask for help!

• Why the OSB is called stateless?

  Hi team,

  I often hear this "OSB is stateless and BPEL is dynamic," but never had an explanation for the same support. I went by this blog once again the same are mentioned here, but any theory about it Can I get some information as possible to this?

  Thanks in advance,

  Malcolm.

  Hi seb,

  I'll try to give you my explanation in this regard.

  The main difference between the two components of Oracle SOA Suite (OSB and SOA Infrastructure service engines) is that SOA Infrastructure, i.e. the BPEL service engine, mediator, business, Human Workflow rules widely uses the underlying database called Infrastructure SOA metadata store. For instance when you call a synchronous service developed in BPEL service engine BPEL and SOA infrastructure c a number of inserts in the base of SOA INFRASTRUCTURE. This process is also known as dehydration. Things get more complicated when we have an asynchronous service - then we have the two dehydration - storing the State of an application in the dehydration store (the store Infrastructure SOA metadata) and restore it later (rehydration) on the back of the State in the memory of the server for execution.

  However, the OSB does not such store of dehydration, i.e. OSB acts as a proxy that passes through (with some intermediate processing) to the demands of consumers of services to service producers.

  That is why the OSB is stateless (it does not store the intermediate state of executions application OSB) as opposed to SOA that stores the application States in the store of dehydration.

  There are some cases where a composite SOA application can be configured as stateless, which will prevent the SOA to store its State in the store of dehydration.

  Hope you find my useful and reasonable response!

  Kind regards

  A.

• BPEL is create multiple instances of a single HTTP OSB call

  Hello

  Here, I describe how looks like my flow of integration.

  
  (1) proxy OSB service calls service BPEL (HTTP protocol for help)

  (2) BPEL called two services to OSB using HTTP calls (these two OSB services will insert the data into two tables)

  (3) according to my testcase an OSB service should be managed and second service OSB must fail, so any integration does not work as expected

  (4) but the second OSB service takes 2 minutes when inserting data into the database

  (5) in 2 minutes BPEL is creating an instance more

  How to stop creating multiple instances.

  Thank you and best regards,

  Harsha.

  Automatic recovery is enabled by default in bpel, you can try catch the fault. You can also change the value of MaxRecoverAttempt please go through this link: https://svgonugu.wordpress.com/2013/05/08/auto-recovery-feature-in-bpel/

  Kind regards

  Anshul

• Filtering the access to the OSB proxies

  Hello

  Suppose you have 2 users X and Y and three different proxy services: 1, 2, and 3. I want that X can only access proxy 2 and Y only proxy 1 and 3. In addition, the entire communication should be in HTTPS.

  
  I did some research and I found two different methods:

  (1) configuration in the console of the OSB access of transport:

  But for some reason, it does not: every single request is rejected and no one can access the proxy.

  (2) using the certificates

  1. I tried using oracle/http_basic_auth_over_ssl_service_policy, but with this, I can't distinguish each service. For this reason, it is not feasible.
  2. A strategy using personalized. I'm not sure on this subject and how to write it.

  What is your opinion? What is the best option?

  Hi there user,

  You must use the OWSM strategy for:

  1. identify the user who calls the service (it could be, for example, the authentication policy for one user name)

  2. allow the user to access the service, i.e. authorization policy.

  In short, you need create a custom in GOSA combine strategy:

  1 HTTPs (possibly - you can use the transport/network encryption)

  2. identification of the user, e.g. the username token

  3 manage permissions - you have predefined patterns of assertion of strategy for this part.

  For more details, take a look at this - http://www.oracle.com//technetwork/middleware/webservices-manager/soa-component-role-authz-1555950.pdf.

  HTH,

  A.

• OSB 12 c: Business Service can not reference foreign JNDI

  Hello everyone

  I have two machines. First machine running Weblogic 12 c with some deployed EJB´s and second machine running Weblogic 12 c with Oracle Service Bus 12 c.

  For various reasons, I must have the possibility of invoking the EBJ (first machine) by the (second) Bus Service

  My first step was to create an EJB HelloWorldService, and deploy it to the first machine. Is the remote interface of console weblogic JNDI name. It can be invoked java application and works very well

  EJB. HelloWorldBean #es.enrique.ejb.HelloWorldBeanRemote

  
  

  I then created a foreign JNDI provider in the second machine (OSB one), using the Weblogic console

  
  

  

  I also have a JNDI connection to that called foreign JNDI provider

  
  

  ForeignJNDILink-0

  
  

  Now, I want to configure a business service with access to the foreign JNDI provider. When I put the URI of my business abroad JNDI, I just created, access it complaints by saying:

  
  

  The JNDI ForeignJNDILink-0 there is no provider

  
  

  
  

  Can someone please explain to me what I am doing wrong?

  
  

  My understanding is that the OSB should see the JNDI foreing supplier because they are both in the same machine (the other)
  

  
  

  Thanks in advance
  

  
  

  Ok. I thought about it.

  Instead of working from the web browser, I tried JDeveloper.

  From there, you can create a "JNDI prodiver", specify EJB machine URL, user and password.

  At this point, you can create a Business Service and set the URI: "jejb: [name of the JNDI provider]: [full EJB JNDI]."

• Oracle SOA/OSB 12.1.3 to 12.2.1 upgraded

  Hi all

  Can anyone help with the steps to follow if you want to upgrade soa/OSB 12.1.3 in 12.2.1. (upgrade within 12 c)

  Thank you very much.

  Hello

  Here you can find some steps to validate your installation and configuration. It is an article of a colleague. They have done several times successfully.

  How to migrate from Oracle SOA Suite/Business Process Management 12.1.3.x to 12.2.1 | Radio Oracle

  Hope this helps.

  Kind regards.

• OSB Service post a Message in the queue JMS twice or duplicate

  Hello

  I have an adapter of the poll of OSB Proxy Service database

  Strategy of the poll: logic of delete

  Column name: status

  Read value: P

  Unread value: N

  Form #1:

  Change of status to "n" and given an end point valid URI of the JMS queue

  Success: DBAdapter > > OSBProxy > > PublishToJMSQ and the situation has changed to 'P '.

  Form #2:

  Change in status of "n" and in view of an invalid endpoint URI of the JMS queue. That is to say, remove resources from JMS queue

  Error: DBAdapter > > OSBProxy > > OSBBusinessService (@Service Error Handler) > > DBAdatper and the situation has changed to 'E '.

  Both work as expected when they are tested one by one. However, if I change #1 & 2 # Record Record and commit at the same time, the status changes to 'P' and 'E' correctly, but the message is published in the JMSQ TWICE (Duplicate) of the first disc. Please note the folder payload #1 and #2 are different.

  It is a behavior strange and unable to understand why it's happening and how it is resolved.

  The two ""required Transaction ","Same Transaction for answer"were not affected ways unchecked. "

  I took non - XA Datasources and QoS in road @Stage activity Publish Options is exactly once. And the version is 12 c

  Your help is very appreciated.

  Thank you

  Hello, the problem has been resolved by defining lines of data per Transaction on 1 in the DB adapter configuration.

• Non-transactional Database query in OSB 12 c

  Hello

  I "ve a scenario like this:"

  Success: DBAdapter > > OSBProxy > > PublishToJMSQ and status-> P

  Error: DBAdapter > > OSBProxy > > OSBBusinessService (@Service Error Handler) > > DBAdatper and status-> E

  Strategy of the poll: logic of delete

  Column name: status

  Read the value: P

  Unread value: N

  
  

  Error in the stream of the OSB, the status set to 'E', but do not be RolledBack to P. (That's what the case currently)

  DB one adapter queries a table on a field, status and connected to the OSB proxy service. READING message is published in JMS Q via OSB business. The status field should be updated to E error via an adapter DB one another through business services.

  I tried several options but could not get the expected behavior. I want to achieve no transactional behaviors that to get what I think.

  Could you let me know your thoughts. Also can you tell me if I need transactional or non-transactional this scenario.

  Thanks in advance.

  Hi Krishna, thanks for your response.

  In fact, the flow goes well only. However, restoration takes place after update the field to 'E' error.

  If there is an error, it is nothing that we can do on the pipeline no response?

  I solved this problem so that you have two data sources and make sure all are no-XAs only.

  Enjoy your time.

• Adapter DB-merge operation is a failure in OSB

  Hi all

  We service OSB invoking a DB adapter with the merge operation. This DB adapter merges data in 3 different tables. We are not able to trace exactly what table badette creates this problem

  It works fine when there is no record in the table, but get error when the merger is supposed to update the existing data (row) in the table.

  the merger failed. Name of the descriptor: [test. XxatSaomOrderHeadersIface].

  Caused by a java.util.ConcurrentModificationException.

  ; nested exception is:

  LIAISON. JCA-11616

  DBWriteInteractionSpec run Exception failed.

  the merger failed. Name of the descriptor: [test. XxatSaomOrderHeadersIface].

  Caused by a java.util.ConcurrentModificationException.

  Check the logs for the record output full DBAdapter before this exception.  This exception is considered non reproducible, probably due to an error of modeling.

  at oracle.tip.adapter.sa.impl.JCABindingReferenceImpl.post(JCABindingReferenceImpl.java:241)

  at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invokeOneWay(JCATransportOutboundOperationBindingServiceImpl.java:114)

  ... more than 75

  Caused by: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/SyncServiceAgreement/Siebel_Agreements/Adapters/Target/Everest_DBAdapter/OAP_AGREEMENT_ATAGREEMENT_SUB_100_ADB.wsdl [OAP_AGREEMENT_ATAGREEMENT_SUB_100_ADB_ptt::merge (XxatSaomOrderHeadersIfaceCollection)] - SISM JCA Execute of 'merge' failed due to the operation: DBWriteInteractionSpec run has no Exception.

  the merger failed. Name of the descriptor: [test. XxatSaomOrderHeadersIface].

  Caused by a java.util.ConcurrentModificationException.

  ; nested exception is:

  LIAISON. JCA-11616

  DBWriteInteractionSpec run Exception failed.

  Can someone help us what's not here?

  We have the version # 12.1.3.0.4 OSB.

  Thanks in advance

  NAIT Slimane

  Do you mean "Logger to associate"?  You can skip this step. This is done in the article so that the messages to go to a custom file. If you leave it by default, he's going to - diagnostic.log file. You can see the trace messages in the file.

  «"" "Bus Service home page, can you choose Logs-> journal Configuation?.»»»" You get something like below (mine is 12.2.1)

  At the same time, you can check with Support Oracle via SR. This being Exception Java, it can also be a bug in DBAdapter. They could provide a fix.

  

• Calc scripts MDX on ASO is 20 x slower than calc on OSB?

  Is it true that calc scripts MDX on ASO's 20 x slower than calc on OSB?

  Our consultants Essbase dear wrote in their e-mail and training documents. I've never heard of this.

  Built a cube BSO staging area, loads all data source BSO. Run BSO Calc staging cube before exporting the level zero to ASO.  Is this crazy?

  Thank you.

  STOP THINKING LOT

  I agree with most of the responses seen above and actually works to understand that the ASO procedural process Calc uses during execution of their work.  This will help us all understand what kind of scripts will be quick and that are frighteningly slow.

  But, my first suggestion seeing most of the manuscripts I am presented with is: why are you using a calc script at all?  Calc scripts are often used when there is no higher level subtotals.  Well, they are always available to ASO.  The way I see it is calc scripts are really necessary when new data of level 0 must be generated and rolled up.  Or in the simple case of copies of data.

  Currency conversion is where they are most often used.  I can't convert each of the 5mm values that contribute to a higher level of $100 mm in order to convert $100 to 91,882,223 euros.  And, often copies of data are not really necessary, especially "real."  Conceivably contours where the plans and forecasts are dynamically seeded with latest figures real or actual same prerequisite.

  So look hard at your old practices first and Rob it of your scripts, anything that can be written as a successful formula of Member.  If nothing else the code remaining will most likely run faster.

  Note: Calc script processing involves the internal tree in which each dat file is organized.  I encourage anyone with an overview of this structure to communicate with me and maybe we can share observations.

• Cannot write to a queue JMS business in OSB 12 c (12.1.3)

  Hello

  I have developed a service application of bus in jdev (version 12.1.3.0.0). In this application of bus service, I have developed a service bus project. In this project there is a business service with the protocol type and message jms with a xsd in the query part and no in response part.but after the deployment of the service bus project when I test the business service the I get an error like " invocation resulted in an error: [JMSPool:169803] JNDI lookup the JMS connection factory jms.sCF failed" : javax.naming.NameNotFoundException: while trying to search for "jms.sCF" did not find subcontext 'jms '. Solved "[root exception is javax.naming.NameNotFoundException: while trying to search for"jms.sCF"did not find subcontext 'jms'.] [Solved "]; rest the name ' jms/SCF"."

  but this same queue works fine in soa12c.

  Help, please.

  Thank you

  Sébastien.

  I solved.

  We must create a JMS connection to the SOA managed server server and also a deployment under connect to the JMS server. Now, I create a queue, CF and update the info to adpater JMS. Then we create the application in the OSB and the uri of end point of BS gave us the reference for the port SOA.

• OSB Setup/licenses need help

  Hello

  I need to build a backup configuration (WebQuote), and being new with VSOS do not know how it the license. Found an article in WebQuote (L101634 Oracle Secure Backup - Stream Perpentual, unit list 3,039.00). Could someone please just describe what to licensing point of view when you create a configuration of backup with OSB, thank you. Or where I could find instructions how the license model. Thank you in advance,

  ALPO br.

  Hi, you answer me. In the case of pure tape as backup target drives, it is allowed by the tape drive. Each tape drive is a save stream and this is the basis for the issuance of the permit.