Satellite M40-331 - missing the logo of the OSB on the first screen

Similar Questions

• HP probook 4520 s held the first screen of the logo

  I was installing windows when the system which took place facing upwards. When I rebooted, it crashes on the first screen of the hp logo. where written "press ESC to display the boot options. without key works ceiling light flashes several times and turn off.
  It is repeated each time. Help, please.

  When it is connected to your desktop computer, can you feel if he goes? When you say that the Bureau does not detect the hard disk, which is in the bios, or when you open my computer?  If the drive is recognized in the bios, you can buy a software like ntfs getback who will try to rebuild the fat table so you can copy items over to the hard drive of the desktop computer.  You can download a trial version that will let you know if it will work, but you will have to buy it to actually transfer the software on disk from the desktop. You can also try to download the certification test of the drive manufacturer that will fix the bad sectors and some minor problems. SpinRite will try to retrieve data for each of the areas that may be of low bits set not completely (upwards or downwards). If the Office does not see the drive in bios, the circuit board on the hard drive is bad or the disc is not rotating. If you gently hold the disc in hand and slightly turn the disc, you should feel a gyroscopic effect of the spinning drive. If you do not feel the disc spins, the motor is probably bad or racing circuit on low hard drive circuit is bad. Sometimes (perhaps 50%), you can try to replace the circuit board with the exact same model Platinum (even if you buy the same model of car, they may have different circuit boards).  The problem is that newer readers have a flash memory chip that stores the settings for each specific access accurate and speed reader. If the exact same Platinum turns the drive, but can't read well, he have to unsolder the flash chip and move it to the new circuit board. Then, the chances improve for recovery. If the new Platinum will not turn the engine, the engine is bad. You will need to send the drive to the manufacturer or to a recovery company that can remove the platters and mount them on their equipment, calibrate and read it (probably $1000 + without warranty). There are people who post how to break on the old engine and replace it with a new one, but I think it would be a mistake to try.

• TextBox multiline missing the first character after the new line

  Hello, I do a pdf report that swaps 2 pages back (the content is the same except for one table), essentially what happens when you click on the button 'page swap' is:

  1. get all the values of the fields in the page that will be deleted in a table "buffer".
  2. delete the page
  3. Insert the other page
  4. Fill out all field values values in the buffer

  So the thing is that in line with several text boxes is missing the first character each new line after this process if I change the content, if I do not change the content, while I share the pages and transfer field values, it makes it ok, it doesn't matter what line change it and how many lines I change in the text box together multiline each new line, I get a character less at the beginning of a new line (except for the first character of the first line).

  I'll try to work program autour with text.replace ('\n', '< br >') or something if I miss a few key configuration for this.

  I use Acrobat Pro 11.0.06 on a Windows 7 Professional client on a 20(3.13.10-200.fc20.x86_64) of Fedora host.

  Thanks in advance

  If you remove the option of formatting rich text for the field, it works fine. "In addition, I don't understand why you need the whole thing to replace line breaks with.
  "tags...". It is not at all necessary.

• SWITCH UPWARDS A NOTICE + PRIVACY PROBLEM WHEN THE FIRST SCREEN LOCK

  Hi all

  I have an Iphone 6 and since I did the update for IOS 10, I have a few problems:

  I can't pass up a push notification when arrive on the screen with your finger, the little thing do missing since (I also have an iphone 5s and I can still do it, also with 10 IOS installed on it) is so very strange to me, I tried to change phone etc... but nothing to do.

  Then, my second problem is confidentiality on the first screen of the phone lock. When I receive an email from outlook, for example, anyone who does not know my zaihon can open, reply, delete, even for the notification of whatsapp etc...

  If anyone knows that a solution would be very nice to share.

  Thanks in advance,

  Maud

  You can disable the mail view in the screen to notify in settings/Notification Center / Mail:

  Use the Notifications on your iPhone, iPad and iPod touch - Apple Support

  You can also delete the Widget for this:

  Use Widgets on your iPhone, iPad and iPod touch - Apple Support

• T43 will not move past the first screen

  My mother gave me this thinkpad because he had a virus (Windows shield Center) and he locked her out of her computer. She could always use Safe Mode, however. When I initially got tried to start, but he walls me an error message "missing hal.dll" and told me to reinstall windows, which I did not.

  I thought that this could be a fluke, but now the ThinkPad won't even go past the first screen that says "To interrupt normal startup, press the blue Access IBM button" without worrying if I press that key, or, the function keys.

  This is as far as I came. What are my next steps?

  This looks like a start of a failure of SouthBridge chips which is very common on these machines.

  Remove the keyboard (but keep that he attached), the palmrest and the wireless card.

  Turn on the machine, then * gently * press the big square under the slot wireless chip.

  If the machine starts normally whenever the square is pressed, a SouthBridge chip failure.

  Good luck.

• Mysterious black border (only) at the bottom of the first screen iPhone

  I have an iOS application that I wrote in 2011, and I'm trying to upgrade to the latest iOS and devices.  I have a thick black border at the bottom of the first screen of my request, for most combinations Device/Simulator and iOS. This is * not * a black border at the top and at the bottom of the screen problem, who has been treated exhaustively in the forums.

  There is only a single black border at the bottom of the screen. Also, the border is only broadcast on the first screen of my request, that has buttons to go to the rest of the application. Even if I navigate to the first screen of my request, somewhere inside the application, the border becomes visible. There is no black border in the other forms in the application, apart from the first screen.

  It is * not * seems to be a launch image problem. I have a picture of launch, [email protected], and the launch image works fine. Here are the setups I get or don't get the black border:

  iPhone 4S (iOS 9.2) Simulator - without black border

  iPhone 5 (iOS 9.2) simulator - black border

  iPhone 5 (iOS 8.1.3) device - without black border

  iPhone (iOS 9.2) 5s simulator - black border

  iPhone 5 s (iOS 9.1) peripheral border - black

  iPhone 6 sec more (iOS 9.2) Simulator - black border

  iPad 2 (iOS 9.2) Simulator - without black border

  iPad (iOS 9.2) air Simulator - no black border

  iPad 2 Air (iOS 9.2) Simulator - without black border

  Pro Simulator (iOS 9.2) iPad - thick black border all around the application window

  retina Simulator (iOS 9.2) iPad - without black border (at the bottom of the screen)

  I tried everything I could think of, but nothing seems to work.

  Hello sandpjain2,

  Everything you wrote in 2011 will likely be rewritten using the automatic formatting.

• Pavillion HP-p6380t: computer hangs on the first screen

  Have HP Pavillion HP-p6380t (bought in 2010) which hangs to the first screen and does not start. The computer is progressing to the point where a repair disc may start or keyboard and mouse can operate. It stops just dead in its tracks. Need help.

  Solved! Read in Google search to disconnect all USB connections. First disconnect the computer went to start. Can't say why it worked, but I'll take it.

• When not in Windows service will change screen what ever I've sat and that he go the first screen where it asks who is connect and it crashes my computer

  original title: security

  Here's the question-problem: when not in use Windows will change screen what ever I've sat and go the first screen where it asks who is connect and it crashes my computer. All I have to do is click on the little box that says locked and I go back to what I was doing. I don't want to do this. I have magic jack phone service and when she did this, I do not get calls? Is it possible that turns off. I have only one user of this computer.

  Go to Start\Control Panel\Hardware and Sound\Power Options\Edit the parameters of the Plan

  Change the option put the computer to sleep time forever!

• Question about ActionBar on the first screen of the application

  Hi, I have a question about the actionbar behavior in the first screen of the application

  index.htm pushes immediately main.htm with actionbar. ActionBar clicks and responds correctly until I have add overflow on some buttons.

  When I click on the button of overflow, the overflow is displayed at the bottom of the page, the top of the overflow is put in correspondence with the upper part of the actionbar so buttons actionbar overflowing content is not visible.

  I reproduce this problem with the sample application.

  This is expected behavior? Is there a way around it?

  I was able to reproduce the problem and have connected it

  https://github.com/BlackBerry/bbUI.js/issues/329

• MIDlet app download kick at the first screen to the receipt of the appeal

  I'm trying to understand why a MIDlet get kick to the first screen when a user accepts an incoming call. I have I would expect the OS to stay on the current screen.

  Based on the code below if you browse to the second screen (and even a third if there is one) then call/answer the phone and then hang up, you will get the kick for the first screen of the application.

  BlackBerry 8330 v4.3.0.124 (Platform 3.1.0.71)

  package pascal;
  
  import javax.microedition.lcdui.Display;
  import javax.microedition.midlet.MIDlet;
  import javax.microedition.midlet.MIDletStateChangeException;
  
  public class BBCallHandle extends MIDlet {
      private static BBCallHandle instance;
      private Display display;
  
      public BBCallHandle() {
      }
  
      public static void exit() {
          instance.notifyDestroyed();
      }
  
      protected void startApp() throws MIDletStateChangeException {
          instance = this;
          display = Display.getDisplay(this);
          Form1.getInstance(display).go(null);
      }
  
      protected void destroyApp(boolean arg0) throws MIDletStateChangeException {
      }
  
      protected void pauseApp() {
      }
  }
  

  package pascal;
  
  import javax.microedition.lcdui.Command;
  import javax.microedition.lcdui.CommandListener;
  import javax.microedition.lcdui.Display;
  import javax.microedition.lcdui.Displayable;
  import javax.microedition.lcdui.Form;
  
  public class Form1 extends Form implements CommandListener {
      private Display display;
      private Command backCommand;
      private Command nextFormCommand;
      private Displayable previous;
  
      public Form1(String title) {
          super(title);
      }
  
      public static Form1 getInstance(Display display) {
          Form1 instance = new Form1("Form1");
          instance.display = display;
          instance.initUI();
          return instance;
      }
  
      public void go(Displayable previous) {
          this.previous = previous;
          display.setCurrent(this);
      }
  
      public void commandAction(Command command, Displayable item) {
          if (command == backCommand)
              doBackCommand();
          else if (command == nextFormCommand)
              doNextFormCommand();
      }
  
      private void doBackCommand() {
          if (previous != null)
              display.setCurrent(previous);
          BBCallHandle.exit();
      }
  
      private void doNextFormCommand() {
          Form2.getInstance(display).go(this);
      }
  
      private void initUI() {
          append("You are in form 1");
          addCommand(getBackCommand());
          addCommand(getNextFormCommand());
          setCommandListener(this);
      }
  
      private Command getBackCommand() {
          if (backCommand == null)
              backCommand = new Command("Back", Command.BACK, 0);
          return backCommand;
      }
  
      private Command getNextFormCommand() {
          if (nextFormCommand == null)
              nextFormCommand = new Command("Next", Command.SCREEN, 0);
          return nextFormCommand;
      }
  }
  

  package pascal;
  
  import javax.microedition.lcdui.Command;
  import javax.microedition.lcdui.CommandListener;
  import javax.microedition.lcdui.Display;
  import javax.microedition.lcdui.Displayable;
  import javax.microedition.lcdui.Form;
  
  public class Form2 extends Form implements CommandListener {
      private Display display;
      private Displayable previous;
      private Command backCommand;
  
      public Form2(String title) {
          super(title);
      }
  
      public static Form2 getInstance(Display display) {
          Form2 instance = new Form2("Form2");
          instance.display = display;
          instance.initUI();
          return instance;
      }
  
      public void go(Displayable previous) {
          this.previous = previous;
          display.setCurrent(this);
      }
  
      public void commandAction(Command command, Displayable item) {
          if (command == backCommand)
              doBackCommand();
      }
  
      private void doBackCommand() {
          display.setCurrent(previous);
      }
  
      private void initUI() {
          append("Hello form2");
          addCommand(getBackCommand());
          setCommandListener(this);
      }
  
      private Command getBackCommand() {
          if (backCommand == null)
              backCommand = new Command("Back", Command.BACK, 0);
          return backCommand;
      }
  }
  

  Form1.getInstance () is called from startApp() * and * whenever this happens, a new instance of Form1 is created and set as the current i.e. display.setCurrent (new Form1()). Iwould think calling incoming call pauseApp() and when call ends, startApp() is called again.

  I suggest you use System.out.println see entities (Form1@1234abcd and Thread.currentThread ()) in lanceApp and other "reminders".

• On the first screen of the reader always tools opens. I prefer open air tools myself if I need of these. Can I change this?

  On the first screen of the reader always tools opens. I prefer open air tools myself if I need of these. Can I change this?

  Hi rienv57241084,

  Please try to uncheck "pane Open tools for each document" under "Edit > preferences > Document' to hide the tools."

  Click 'OK', and then restart the player.

  Kind regards

  Meenakshi

• Satellite M40 - question on the BIOS update

  Hello

  I need to update my BIOS to be able to use a new stick of ram to 2 GB. Unfortunately I can't find an update of the specific BIOS on Toshiba website for the 265 M40, WXP with ATI graphics card.
  Which one should I install? M70, M100, 3.00, or 1.70, psm01, psm02...?

  Thank you

  Satellite M40 can grow up to 2 GB of RAM, and to do that you need BIOS update memory vivid but compatible modules.
  Toshiba recommended 2 PC2700 X 1024 MB (PA3313U-2M1G).

  What 2 GB module you want to use?

  That's all!

• Satellite M40: Question about the installation of the driver

  Dear Toshiba

  I have Toshiba Satellite M40, when I installed with win Xp recovery CD, I found everything is ok except the following:

  When I go to 'connection area action' and press 'install' botton to install client for netware... I have the following message:
  "unable to find the drivers for this device...". If you have a disk that contains the driver update or windows search click ok"

  Help, please
  Thank you

  Hello Mohamed

  It seems that your laptop is trying to install the network driver, but the operating system can find t he or you the driver source is false.
  In this case you must download from Toshiba Web site network driver and install it.

  Good bye

• Satellite M40: Modem fails the diagnostic test on WinXp Pro

  Satellite M40 comes with Windows XP Home Edition pre installed and when I ran the diagnostic tools to test the modem the modem passes the test. But when I installed Windows XP Professional SP2 media center, the modem fails the diagnostic test.

  What surprises me is that I have not received any error during installation and all devices, including the installed modem OK with no problems.

  Another observation when I tried to connect to the Internet using our dial back of company during installation of Windows XP Edition family's volition I remembered and the modem responds very well. But with Windows XP Professional SP2 media center installed the modem call how ever in "waiting for call-back ', when the server of our company try to call me, the modem does not respond and waits until I get the message Time out

  Please if anyone has an explanation for this decision No. let me know because it is driving my nuts.

  Thank you
  Oumy

  Hello

  Have you tried to install the latest driver of modem? Please check if you have the right driver for Win Xp. You can find the drivers on the Toshiba site.

  http://EU.computers.Toshiba-Europe.com

  They are a lot of drivers for countries individually.

  In addition, Windows XP SP2 includes the new Windows Firewall. It is possible that the firewall is preventing the modem connection. You can try to disable the Windows Firewall.

  Good bye

• Can satellite M40 - I put the graphics chip?

  Hi all

  I have laptop Toshiba Satellite M40 series.
  My vga card is becoming old, so I need to upgrade and I was wondering what I can?

  Hi mate

  Unfortunately, you can't move the graphics chip because it s attached to the motherboard.
  To my knowledge he welded s.

  Yes, nothing to see