Disables the killer wireless 1535 under heavy load

Similar Questions

• getting dropped under heavy load of iSCSI LUNS

  Hello

  
  I found a few forums on this... but not a response yet.

  I have a Hp Lefthand 4300 cluster for the storage, connected to 2 x DL360 G7 ESXi 4.1 via iSCSI (Hp edition) guests and a Procurve gigabit switch dedicated for iSCSI. Whenever I run a backup down the LUN for a few seconds (usually 5, however it was as much a minute).

  Things, I tried...

  Updated software from the left to the latest version

  Updated all the HP firmware on the hosts

  Update to the latest drivers HP Boradcom on ESXi hosts

  Changed the timeout 1400 (esxcfg-advcfg - s VMFS3/14000/HBTokenTimeout)

  These servers come into production in the new year... Please please can someone help me solve this problem?

  I call open with Vmware and HP, nor was particually useful, Vmware has suggested I called HP and updated card drivers NETWORK, HP simply said that it was a network problem and closed the call... Thank you!

  I intalled surveillance under tension and can not see all ports dropped etc. All the equipment is new and the LAN cables are Cat6.

  Don't really know where to go from here!

  The exact error I get is...

  Lost access to the volume (4cf7b1ac-5fdcc218-5c2e-1cc1dee48e30)
  S1 - SP1OS) because of connectivity issues. Recovery attempt is in
  progress and results will be announced soon.
  Info
  2010-12-27 01:06:06
  192.168.32.2

  Please help me!

  Kind regards

  Kris

  We have recently changed some hosts who also had problems on a heavy load with iscsi San connections. We used hwiscsi (TOE), Broadcom adapters (was a recommendation from different vendors) before and this has recently changed to swiscsi (with Jumbo).

  No. dropped / resets on connections over this host. And a much faster flow of vm (tested with IOmeter).

  We also saw a much beter performance (throughput) on hosts with NIC configured to swiscsi on comparisation of hosts with an iSCSI HBAS (Qlogic 4062).

  We use VMware ESXi 4.1 (latest patches).

  Problems with broadcom TOE (hwiscsi) on HP DL360G6 also on Dell M610 blades.

  SAN: EqualLogic PS5000 PS6000, PS5500, PS6500,

  Switches: Juniper weer Jumbo Frames and flow control.

  So I recommend you also use swiscsi on these broadcom adapters.

  If you are looking for broadcom issues with vmware, find others with similar experiences.

• Toshiba Software by disabling the automatic Wireless Configuration Service

  I have a problem with a Toshiba Satellite Pro laptop. When I start the system, the automatic Wireless Configuration Service is disabled and I have to go into Services and start physically whenever I start Windows (XP 32-bit sp3).

  I think it's own software of Toshiba (Q-Connect/Summit?) it prevents start automatically with Windows, because everything else is as it should be.

  Can you advise how to fix this so that the service always starts automatically and does not, during the trip, the settings for windows? Set up a wireless ad - hoc is quite difficult because there is no more headaches.

  See you soon,.

  John

  Hey Buddy,

  It s I don't know ConfigFree turns off this feature of Windows... As far as I know it s necessary service for all WLAN configuration tools

  Is manual start automatically, or simply the value type? You must assign it automatically.

  By the way: what laptop do you have?

• Disable the button Wireless Laser Mouse PA3706E Alt + Tab?

  I have what I think, it's a mouse Toshiba PA3706E (it's the one in the picture below)

  It has a small button of Alt + Tab at the worst place in the fact that it could be, and I was wondering if anyone knows a way to disable? I installed the thing that comes with it to change the functions of the buttons, but for some reason, it is the only button you cannot not change or not. The only option for the Application Switch button is Alt + Tab.

  http://img340.imageshack.us/img340/8080/mousedriver.PNG

  Anyone? It's makes me absolutely crazy and things like TF2 happens to crash when it Alt + tabs; -

  > Is it possible to disable it, as pilot/configure CD software that comes with the mouse wont allow it.
  Well, if the software that came with the mouse, does not support this option, then I put t see any other possibility to disable the button ALT + TAB.

• * KILLER Wireless 1535 disconnection from the wifi

  I have a new Windows AW15R2 10 Pro, everything worked fine during the first week.  I downloaded my games on Steam on my laptop (big 5 GHz speeds AC).  Since the last game I downloaded, I installed a wireless Xbox One adapter / controller and now my wireless guard fall.  I uninstalled the drivers for the Microsoft controller and always the same question.

  The wireless card downloads to approximately 20.0 MB/s for 30 seconds, then drops to 0 MB/s, I get a yellow exclamation mark on the icon turns off wireless and light up again.

  Please give advice on this issue.

  Thank you!

  Never had any problems with wifi killer.

  Have you tried to update the wifi and the Bluetooth driver from the site Web of Qualcom?

  www.killernetworking.com/.../Driver-downloads

  Alternatively, you can try to disable wifi automatic energy saving mode.

  Open Device Manager, and then right click on your wifi card, then select power management, then uncheck the box that says "turn off this device to save power".

• Disable the default wireless on Acer Aspire 5741

  I have an Acer Aspire 5741-5698 running Windows 7.  I never want to connect to wireless internet.  I want to only rarely connect with a wired connection.  I can disconnect the wireless by pressing Fn + F3, but I never see a "Launch Manager".  The problem is when I turned off the computer and turn it back on, it by default, a wireless connection.  I went to manage networks wireless in Control Panel and manually selected connect to my home network.  It does not work.  How can I stop to automatically connect wireless?

  Go to the device, click Manager right on the wireless, then click on disable. When you want to use the wireless go back and click Activate.

• Re: Disabled the connection Wireless on Win 7 - Portege R600

  I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
  When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

  I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
  BT Stack, etc.

  Does anyone have an idea?

  Hello

  Wait a minute;
  You want to activate; Modem WiFi or 3G?
  Please note that WiFi is not 3G modem.

  Don't forget that you have chosen and activated the modem 3G and not the WLan.

  Welcome them

• How can I disable the Thinkadvantage fingerprint software under msconfig?

  
  
  

• Fall Alienware M17 Killer Wireless N1202 Connection

  Hey guys and girls, I'm here to ask about a problem that I've seen a LOT of people have with this laptop / particular wireless card. I recently bought the M17 and the only problem I had with it is the card Killer Wireless N1202 give up my connection randomly and reconnects.
  I have "business" with him for a few days now, but the drops random during the time of the browser, videos, and games really starts to break my nerves.

  So far, I checked the firmware and etc is updated in my laptop. Tried to disable the Killer Wireless Manager. A flick of some power in the performance options. Nothing seems to work.
  Anyone has a final o the problem solution?
  Thank you!

  so I think that the thing most important to do is to go into Device Manager, right click in the wireless card and choose uninstall.

  Reset.

  Windows will see it and reinstall it. It should work now. Give it a shot.

  If you use the Killer-N driver probably doesn't really matter.

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• 5660 envy: envy 5660 disable the wireless SSID

  I have the printer connected via USB, do not have a Wi - Fi connection.  The printer always broadcasting a SSID, even though the wireless feature is set to OFF.  I looked on these forums and looked through the manual and nothing works to turn off the SSID of the printer braodcast.  How can I disable the SSID?

  Hi @divot71,

  Welcome to the HP Forums!

  I understand that you want to disable the SSID wireless with your printer HP Envy 5660. I'm happy to help you!

  If the wireless function is set to off, the only other function I can think. Is to disable direct wireless as well. According to this guide, printing with a Wi-Fi Direct, she says: most HP printers wireless released in late 2014 and later support Wi - Fi Direct. Printers compatible with touchscreen control panels have a Wi - Fi Direct icon (). If your printer control panel does not have the icon, go to the menu of the Network Configuration or the wireless settings and confirm if an item of menu Wi - Fi Direct is displayed.

  I hope that solves your problem!

  "Please click the Thumbs up icon below to thank me for having responded."

• How to DISABLE the wireless transmitter

  How can I disable the transmitter wireless to my printer?

  My wife is electrosensitive!

  My printer is a HP Oficejet Pro 8600.

  Hello

  Pleae try the following (for most printers):

  http://blink.UCSD.edu/technology/network/connections/wireless/HP-wireless-printer.html

  Kind regards.

• P620 turns off randomly during heavy load

  Hello!
  
  I've had my computer since 2007/2008 now and I have came across a problem of dust. I cleaned it and it worked fine again. After I had finished, I moved my computer one meter or more. A day later when I curled the computer, everything was fine, I had a game running in the background. But when I came back, my computer has been cut, so I thought that my roommate turns off the computer. Didin't there do! Later when I started again, I came to the Startup Repair. I curled the computer, but when I came back, you guessed it: it was closed. I asked my roommate again and there still didin't make. Later, I used a live cd of Ubuntu to the backup on my hard drive computer internet. When he was done, I started the process of re - install my computer. Until I clicked on the button reinstall, I tried one last time. It worked! So he came with a "computer didin't work properly' or something. The resan was BlueScreen. So I tried to open the minidump file, but my programming program expired, so I couldn't open it. LARGE. Later, my computer said that it had no internet and icons started disppearing. It seemed that the hard drive has begun to be unloaded. I clicked on the icon and BOOM internet! My computer is turned off. No reset. Right next door. I feel this only when it is under heavy load. And I knew just the effect "unload" 2 times. Other times, the screen goes black and the power light is still on for like 5 seconds and then shut the computer completely, it also occurs on the effect "unload"!
  
  Computer:
  Model: p6320sc
  If you want more, ask me.
  
  Thank you for your time.

  Hello GAsplund

  I'm sorry to hear your computer is overheating, but I think I can help you. I provide you with a link to a paper support HP here "reduce heat inside the PC to prevent overheating" to help reduce the heat so that your computer stays on.

  I hope this helps solve your problem of overheating and here to thank you for the post on the HP Forums have a great day!

• Disable the status options of calling on Samsung Galaxy S II

  Whenever I log a call with someone, it shows the status of the call directly on the screen and I'm not able to see their faces. I tried all the options and I can't turn it off. Help!

  Hello

  In order to solve the problem, you should disable the 'technical information' call under Skype settings.
  Tap your image on the upper right to access your profile. Once there, press the menu button > settings > (scroll down) uncheck the entry "technical information".

• OfficeJet 6600: flashing of the indicator wireless.

  Why suddenly the button (the small blue button at the bottom of the printer interface) wireless starts to Flash? I'm usinga USBconnection.

  It simply means that you are not connected to your wireless SSID router. Normal since you are connected USB. If you want you can disable the connection Wireless in the printer and it stops. Info is in the User Guide.