Getting family XP Edition installation diskettes

Similar Questions

• I, ve lost a family Vista Edition installation disc premium, 64-bit, but still have a product key #. Where can I get a drive? Thank you

  Mobility Center is not working properly

  Hello

   

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• I can't get FSX gold edition to work more than 10 seconds!

  I can't edition FSX gold to work more than 10 seconds before the crash of the software. I reinstalled several times, even the demo we do the same thing! I get a message 'not compatible '. I tried all the settings in the compatibiliy box (inc by checking the box of the administrator), my system is Windows 7 home eI get FSX gold edition to work more than 10seconds before the crash of the software. I reinstalled several times, even the demo we do the same thing! I get a message 'not compatible '. I tried all settings in the box of compatibiliy (inc by checking the box of the administrator), my system is Windows 7 edition 64 family. the chip is an i5 3470 running at 3.2 GHz, 8 GB Ram, 1 TB hard drive card graph NVIDIA Gt650.

  Load FSX OK, but when it blocks it seems to block all e PC upwards. The answers would be welcome

  Hello

  FSX is very demanding in graphic design, it could be the laptop graphics card can not handle.

  As a work around you are trying to update the graphics card drivers is available from Nvidia.

  What is the source of the installation of the game? What is a downloaded file or CD?

  However, the question you posted would be better suited in the support of Microsoft Flight Simulator since we have a dedicated support for this; We offer that will also post your query using Flight Simulator for assistance:

  http://support.Microsoft.com/GP/games-for-Windows

  http://www.Microsoft.com/products/games/FSInsider/tips/pages/default.aspx

  Please report if you need assistance on issues related to Windows.

• "I get,' files for the recovery diskette can not be created ' and I can't save my PC

  When I try to back up my PC, I get "files for the recovery diskette could not be created" how to fix this?

  Hello

  This problem can occur because ASR is not supported in Windows XP Home Edition. However, users of Windows XP Home Edition can access the Recovery Wizard if they install the Ntbackup program in the Windows XP Home Edition CD-ROM Valueadd folder.

  See the steps listed in the article below and check
  An Error Message appears when you try to use the Automated System Recovery Wizard
  http://support.Microsoft.com/kb/302700

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error - the application or DLL is not a valid windows image. Please check this against your installation diskette when trying to open a program or start the computer.

  Original title: bad image.

  I get two errors of bad image whenever I open a program or start a computer, for each program.  the error that says "the application or DLL is not a valid windows image. "Please check this against your installation diskette" I don't have any disk and don't know what to do.

  These file names, look a little suspicious and didn't get good Google search results, so I think that the first thing to do is to tell us a little about your system.  Now you can enjoy when you report a problem, provide you with any error messages you see and not a part of it (not paraphrase either).

  The second thing to do is to try to be reasonably sure that your system is free of malware and then if you have these problems, you can fix them (which would be the third thing to do).

  I still wonder why the Microsoft Support Engineer made you reference to an article that makes no sense at all...

  The first thing to do:

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The second thing to do:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  The third thing to do:

  Restart your computer and solve the outstanding issues.

• Error "the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. "Please check this against your installation diskette."

  Original title: lockout

  I get a black screen with the message from the application or DLL C;|WINDOWS\system32\NCObjAPI.DLL is not a valid Windows image. Please check this against your installation diskette.

  Hey Todd-Cindy-MorganBurris,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. You are able to boot into Windows after the error message?

  Method 1

  If you are unable to boot into Windows then check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 3

  If you can boot into safe mode and clean boot procedure don't help then I would suggest that scan you SFC on the computer that will search the corrupted system files and check if that helps.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• The Application or DLL C;\program~1\Google\Google~1\Google62~1.DLL is not a valid Windows image. Please check this against your installation diskette.

  Original title: Please help

  The Application or DLL C;\program~1\Google\Google~1\Google62~1.DLL is not a valid Windows image. Please check this against your installation diskette.   I get this message all the time that I can still use my computer, but it is very annoying, I'd be very grateful for the help!

  Scan your computer with Malwarebytes. Get rid of AVG and get the free version of Avast (free if you can afford it). Get rid of Iobit. It doesn't help. Get rid of the advanced system of care. It will do more harm than good.

• Not able to install the application, asking family SMEs of installation

  Original title: iam not able to install the app it ask family SMEs of installation

  IAM able to install apps it ask some family configuration

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. What you are trying to install applications?
  2. You are the administrator of your computer?

  You can set up a family safety account or you may be referred by the primary user. For the children of family security controlled, if game Restrictions are lit, depending on the setting you have (lower than 10, teen, mature etc), your child will be able to download applications that meet the coast.

  Here's what I suggest, if you wish to:

  1. Go to https://familysafety.microsoft.com and login as parent
  2. Check the setting of the game.

  You can do two things

  • Put out of the game restrictions or
  • Change the restriction of adult game

  Once your child has downloaded the application, parent go back to the family site, turn on the Restriction of game or set the game side to one appropriate for your child.

  For more information:

  Use security for the family with the Windows store

  Also, in the list of game for your childs account, make sure that the app is in the whitelist if your username already has but gets blocked by parental control due to permissions issue.

  Let us know if you need more assistance. We will be happy to help you.

  ________________

  Thank you best regards &,.

  Isha Soni

• The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

  The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
  Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

  This has happened

  Each time Firefox opened

  few days back

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

  I have the same problem

  deleted expletives - Maurane

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• All that print from the web doing in the HTML code. I use the family XP Edition version

  All that print from the web doing in the html code. I use the family XP Edition version.  I'm almost on my home computer so I don't know when it happened first.  Try to print the boarding card.  Help.

  Thank you

  Hi GordonHarris,

  ·         You use Internet Explorer? If so, what version of Internet Explorer?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  (a) click Start, Control Panel, Add and remove programs.

  (b) click on set program access and defaults, select custom, select Internet Explorer as your web browser by default.

  (c) click OK.

  Method 2: Follow the steps in the article, if you are using Internet Explorer.

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Is someone can you please tell me how I can get a windows XP installation disc?

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  I have an old computer with windows XP that crashed recently. The thing is that when I bought the computer, it did not come with an XP Setup disk. So can someone please tell me how I can get a windows XP installation disc? I tried several ways to fix the computer. I installed a hard drive with win98 and tried to recover my files. Also, I deleted the original hard drive and installed win98 to try to connect to the internet so I could install Ubuntu or Pandora.

  Windows XP disks are no longer manufactured or sold. You * may * be able to find a place with an old stock for sale, but it is not very likely. Close your only choice is to purchase a used copy somwhere (but I would avoid eBay, where any software you buy is probably hacked).

• HP Pavilion a6530f Phenom X 3 8450 2.1 GHz family Vista Edition evolution of xp desktop PC

  Before buying this computer I need to know if anyone has the drivers for it? I might not be able to change it to XP Pro, the company said.

  HP Pavilion a6530f Phenom X 3 8450 2.1 GHz family Vista Edition evolution of xp desktop PC

  Marys64

  There are those from the Intel camp who say Intel is better, while AMD fans will swear by them. I have two machines here, and personally, I lean towards AMD.