Getting started Questions: 2

Similar Questions

• Getting started questions:

  If you start with a picture at 300 dpi, would be the puppet resolution should be 72 dpi?

  With the help of rotation full front - left - left - right head 3/4 3/4 and on the right the profile.

  You need 5 different heads, one of each location?

  Every head shall include all eyes behaviors for lip SNYC in all 5 heads?

  Do you want to use the same source (pivetpoint)? Hoew exactly would you assure a correct positioning?

  When you configure the lip SNYC, how can ensure you the positions of good mouth?

  Thank you

  by

  • I never tried to 300 dpi, but I would personally like 72 dpi for the performance of the only reasons (small size).
  • Yes, you need 5 different groups of head in your main folder of the head (see Wendigo in the example files). Currently in Preview 3, you will need to manually add the face and lip, synchronization to each head behaviors. In the snippet 4 to come, this will be automatic, and you will get two new modes - upwards and downwards.
  • Definition of a point of original head would affect all head positions inside the it - so I put only that one. When you make different heads, you will need to make sure that everything is aligned correctly (I often turn the visibility of the layer to simulate the transition to the PS or the ACE).
  • Big mouth to sync lip is a form of art in itself. If you search for "viseme of the comic strip" in a search of online image, you can see some examples of cartoons.

• WLC use Management Interface & more get started Questions

  Hello

  I am yet to implement Wireless LAN in one seat of our customers. There are 40 x 1130AG LWAPP AP and WLC 4404 with ACS 4.x for authentication of Wireless Clients attempting to access the LAN.

  For the WLC to connect to the Dual Core Switch, I need to use only a Management Interface with port 1 being the main and mapping Distribution system the DS 2 Port as the backup for the Management Interface port. Is this correct? or can I have configure dynamic Interfaces as well. Is the interface of access management / management and configuration only? Management interface will communicate with ACS for AAA and AP who wish to associate with the WLC, is this true?

  Note: WLC, AP, Wireless customers & AP are in the same IP subnet.

  Some other question of WLAN is so it helps me during the implementation.

  Can • I use the 802. 1 x authentication applications saved in Windows XP for the Wireless Interface; instead of the Client Application from Cisco. For this purpose; I have to configure the WLC / Wireless Client use EAP algorithm; is that correct?

  • With the help of MRR, interference between of multiple (3-4 AP) AP in the same area is controlled by the WLC by changing the channels used by the AP, that isn't even on of the AP is it good?

  • How many users Client will connect by channels. 802.11 a / g will provide 11 channels, it is right?

  • I'm putting in the WLC to limit client connections by AP to 25, can this be achieved?

  Please, can someone help me calrifying the points above.

  Kind regards

  Keshava Raju

  Unless this has changed recently, you can't. The ports must be then break into individual groups. You can the controller mode layer 3 as Cisco is the support Layer 2 stop. The Director of the PA is necessary in all cases in LWAPP layer 3 transport mode. Do a search on Cisco.com to the configuration guide for the version of the code you are running. This will give you a step by step installation instructions.

• Getting started Questions: 3

  Hi Ch members

  First of all, I want to thank the people who answered my questions in the past. The fact this is the first time that I've never used a forum, I didn't know how to tag 2 times the same question as well.

  
  

  Products Adobe have a feature that allows recording of keyboard and mouse strokes that would produce a computerized procedure step by step necessary to accomplish a specific task or group of tasks?

  
  

  I just watched episode 1 again. Dave had the character Cyberman in a normal state, moving his arms. Under the left arm has been key to 5. When Dave pushed BOTH hands turned to fists and went up to the waist. Has been the key only trigger in the left arm, but controlled both arms? If I intend 8 sets of hand for each arm positions, usually involving them both at the same time. Where would the triggers must be placed in the left or right arm or both? A simple arm movement should be placed in the arm proper only, right? My last questions covered this, but, but I really need to make sure that I understand this procedure.

  
  

  Is it possible to develop your layer structure in PS with the graphics included in the layers?

  
  

  Thanks again until the next time

  by

  I always put triggers KB in each layer I want control. If I want the left and right fist to move, always to the same trigger, I would use 'f' for each of them. But I might sometimes want to make them at the same time and sometimes individually. For this, I would choose triggers side by side on my keyboard. For example, 'f' for the right fist and 'g' the left fist. Then I could push the two triggers in the same time, or just one or the other separately.

  I hope this helps.

• LR3 Getting Started questions

  I am opening since v2 and I looking to spend 3 LR, but have some questions of functionality before buying LR.

  Right now, it is not designed as Aperture LR can, can't post.  It is intended to, LR has features that I love and is considering moving to it in the course of the opening, but what follows is a 'must - have' and I just want to know from a technical point of view, if I can do the same (similar) workflow in LR3.

  1 keywords: can I assign keywords via the keyboard?

  Opening

  Set of keywords: me, you, someone else

  Opt - 1 "Me" affects to selected images, Opt-2 'You' affects to selected images.

  Set of keywords: cat, dog, rabbit

  Opt - 1 will now assign "Cat" to a picture, Opt - 2 will assign 'Dog' to an image.

  The same concept can be done in LR?  If so, a link to a tutorial would be appreciated.

  2. smart Albums (Collections in LR)

  Opening

  I have a project with 100 images, in this project, I have 30 images in an Album1, 50 images in Album2.  Using Smart Album, I can create a rule that shows me that the 20 images that aren't in Albums (IE. Album1 or Album2)

  The same concept can be done in LR?  If so, a link to a tutorial would be appreciated.

  3 refenced vs Managed

  I have a library of reference in A3.  The files reside on external HARD disk (~ 100 GB), library (previews, keywords, etc.) resides on the internal HARD drive (~ 20 GB)

  Reason, I don't have that internal a HARD drive 120 GB.  Managed would not hold on my internal HARD drive.

  I added three images to a LR test, 2 MB each, and resulting in the Finder LR catalog file is about 3 MB.  Is the normal load of LR, about 50%.  If so, who does not work for me.  There are pre-sets to reduce the news file in LR?  Sense, previews low resolution, etc...

  4 drag-and - drop from the Finder

  Is there a way to drag - move pictures from the Finder to an existing catalog?

  1 keywords: can I assign keywords via the keyboard?

  Even the opening.

  Opt/ALT + n to assign the keyword-n (where n is a number from 1 to 9);

  Opt/ALT + 0 (zero) to scroll through the keyword sets.

  2. smart Albums (Collections in LR)

  Create a Smart Collection with the following rule: Collection contains not 'Album1"AND the Collection contains not 'Album2".

  3 refenced vs Managed

  Lightroom is not "managed", only "referenced".

  The size of the catalogue is growing mainly because of the cache of the preview, which is always located next to catalog (unless you use some hacks). Catalogue Prefs, you have options for preview quality (low, med, high), size (1024, 1440, 1680, 2048 on the long side) as well as the maximum time before you throw 1:1 previews.

  These 3MB is your catalog + hides the preview and probably some initial overhead for a catalog is empty (an empty database cannot be as small as 0KB).

  As a general rule, I think 1 MB per image for preview cache is a good hypothesis. So, a catalog of 50 k, you have 50 GB for the preview cache. The catalog itself must be less than 1 GB for this number of images.

  4 drag-and - drop from the Finder

  At least on Windows, it works fine. You drop the files and Lightroom opens the dialog box import with only the files that you gave up being selected for import, although the folder in the Finder/Explorer has more files.

• Questions of getting started with Service contracts to small businesses

  I recently bought small business Service contracts for my Cisco Small Business networking products. I know that I get support 24 x 7, as well as the ability to open cases taken in charge (I recently tried and it works fine).

  I also know that I get next day material, as well as firmware upgrade replacement for my networking products.

  Here are my some "Getting Started" questions:

  1. If I need a replacement of material next day, how can I go to? Open a case of pension? I saw under the requests of support there is an option for the replacement of equipment.

  2 will I be automatically informed of updates firmware for my networking products, or I have to look it up on the Support Center? I don't know how to upgrade the firmware of all my networking products. Is it possible to subscribe to a list of email or RSS feeds notifying me of updates firmware for my networking products?

  3. I will announce when my service contract is about to expire so I can renew them, or is it my responsibility to do not forget to renew? I have to manually put on my calendar?

  Thank you!

  (1) to request an RMA number, you must open a case to the HWC.    You can call 866-606-1866 24 x 7 to prosecute.    If you do not have a support contract, (under warranty) you are only entitled to phone support 09:00-18:00 (local time) m..     You MUST be prepared to troubleshoot the device with the HWC engineer.     Do not assume you can open a file and receive an RMA number without looking at the camera.     Often, we can save the camera and make you save a lot of time.

  (2) you can sign up for automatic alerts on updates of the firmware using this link and by selecting the devices you want updates on.    The 2nd link allows you to manually check for updates.

  http://www.Cisco.com/Cisco/Web/support/index.html

  http://www.Cisco.com/Cisco/support/notifications.html

  (3) I checked with HWC contracts administrator.       According to her, you should begin to receive alerts from 6 months to 90 days before the expiry of the contract.    You may or may not be able to renew the contract, based on the life cycle of the product.

  In response to Dirk: you can extend the support of the product by buying a service contract any time during the period of 1 year warranty.     A support agreement for your device can be purchased from any local Cisco partner or any Cisco partner online.     Here are the main advantages of a contract on the guarantee.     They are a great value.

  • Extended telephone technical support from 1 to 3 years
  • Replacement of tip / the day following RMA return vs factory RMA
  • technical support 24 x 7 vs.  9. 6 M - business hour support F.
  • Firmware update
  • Even if your product my have a lifetime material warranty, which does not qualify for the technical / troubleshooting / configuration is supported without a contract.     With the warranty on the equipment only, the HWC troubleshoot your product just enough to know if it qualifies for a replacement of hardware.

• HOW can I remove my Bookmarks Toolbar Firefox's "Getting Started" link? It wastes space and seems invulnerable to the attempted abductions.

  From the outset, I am on a MacBook Air, running Yosemite & the most recent Firefox Help. If your only interest in my question is for bash Macs, then (yawn) I'm not interested. If your interest is to help sincerely, then you have my interest as well:

  I'm stuck with a "Getting Started" Firefox link as the first 'signet' (left) on my bookmarks bar, I really want to delete: I was in the Apple computers (from the Apple] [e) & online since the mid-80s, so I'm hardly a naif in the digital world or Firefox newbie , so having a "Getting Started" link to life is ridiculous, AND I really need the space to accommodate MY choice! Then...

  I tried all ways recommended to delete unwanted bookmarks - Firefox, BUT when I pull down the "Show all bookmarks" command of bookmarks in the Menu bar, there is NO such thing as the "Getting Started" link, so I can't delete it there. I've even linked by clicking and dragging it out of the toolbar, but it does not (nor made more by dragging to the trash. Then, someone has idea of this insurgent link?

  You can try this?

  1. Open the Bookmarks Manager. In what is the Apple menu icon or the menu bar, click bookmarks > show all bookmarks.
  2. In the search bar search Favorites, type getting started.
  3. Delete the bookmark that opens.

• SCXI and USB 6210? Getting started...

  Hello

  I'm looking to get an online data collection system and had a few quick questions of SCXI signal conditioning high-performance...  First of all I have is 1 chassis SCXI-1000, SCXI-1121, SCXI 1180 and 1100 SCXI modules assorted.  I also have a few blocks of different endings, SCXI-1300 block and a 1320.

  (1) by section "what to start' in"the SCXI chassis user manual"everything only I need is hardware of SCXI chassis (in my case the SCXI-1000 chassis), a 120 VAC power chord and a computer.  However in the ' what you need to get started section "of the manual"Getting started with the SCXI"I need also a SCXI-1200 or"Hardware DAQ"module  So my question is this, can I set the SCXI-1000 chassis directly to my laptop without any additional hardware?  I feel, I need something else, but want to make sure...

  1 (b) assuming I need a material additional DAQ to start, I can use a NI USB 6210 somehow?  I checked the manuals and little is said about SCXI.

  (2) neither manual mentions a controller, but the SCXI Advisor shoot one.  They should say if all I do is collect data, not active control?

  Thank you

  Mike

  Mike,

  There are two options for you to get your SCXI system operational. You will need either an M series or a card of E-Series you connect to your SCXI system or you could focus on the NI SCXI-1600, which is a controller for your SCXI chassis and allows you to connect your laptop to the controller via a USB cable. This controller will operate similar to the E-Series and M-series cards.

  We also offer a couple of PCMCIA cards which allows you to integrate the SCXI system with your laptop. It comes from the NI DAQCard-6036E, and NI DAQCard-6062E. Unfortunately, your NI USB-6210 is unable to be used as a device for the Acquisition of data for your SCXI chassis. The list DAQ cards which are possible to use with your system can be found here on the tab 'controller '.

  http://ohm.NI.com/advisors/SCXI/pages/SCXI/modules.XHTML?conversationContext=1

  In addition, we have an old manual SCXI of starting you can find here:

  http://digital.NI.com/manuals.nsf/WebSearch/C195895E8C9CAE3D8625691F004DB285

• Hyperion OpenLDAP service is not getting started

  Hello
  
  Need urgent help.
  
  Hyperion S9 OpenLDAP service is not getting started on windows server after unexpected server restart. I get the following error
  
  "Windows could not start the Hyperion S9 OpenLDAP on Local computer. For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service 21-specific error code. »
  
  I tried running the recovery exe "openLDAP\bdb\bin\db_recover.exe". But always failed to start the service.
  
  I use version 11.1.1.3 to Hyperion.
  
  
  Kind regards
  Sunil.

  Have a read of http://john-goodwin.blogspot.co.uk/2008/08/bring-back-my-openldap.html

  If you still have questions then you need to restore from a backup file

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Getting started with VMware ESXi

  Please forgive me, because I'm just getting started with virtualization in the data center (ESX and ESXi). I been using virtualization desktop and server (player and GSX Server and Workstation) for several years now and I'd like to see if ESXi would be a good choice for an amateur system in order to use a training platform.

  Are my limited infrastructure management tools, or are there third-party or community free equivalents that will make the most much (not necessarily all) Infrastructure functions for me getting started with ESXi? I can't afford the cost of a license of Infrastructure to learn just the platform and also have a few questions regarding the ESXi environment.

  ESXi abstract everything, or I can pass through some devices (for example, a map of Zaptel for VoIP Asterisk) to a guest operating system? That would be my only reason for the use of a Linux host and stick with VMware Server instead of going completely virtual.

  Any assistance to the start-up, as well as good resources for someone new data center virtualization (no virtualization in general) would be very appreciated. I tried to read some briefs VMware tech directly, and a part of the documentation can be downright confusing.

  Thanks in advance, and I look forward to the next meeting.

  ESX are equipped with a fully functioing 60 days trial license - ESXi when correctly entered, you will receive an unexpiring licenses to run ESXi - discover https://www.vmware.com/tryvmware/?p=esxi

• How to get started with Obj oriented AS3? (Flash help seems broken)

  OK, I won't be the noob who does not read the manual and ask stupid questions, but I'm stuck here. It's been long since I had no experience real flash (Flash 5 in depth) and a small Flash 8. But now, my work has led me in some flash work & I'm basically from scratch. I am trying to get just a simple SWF to load an external class and have the class retrun value of a method.
  
  I define
  
  package
  {
  public class Greeter
  {
  public function sayHello (): String
  {
  var host: String;
  greeting = "Hello World!";
  return of the vows;
  }
  }
  }
  
  in an .as file (which is located in the same directory as my .fla) then frame 1 of my time line, I have:
  
  var myGreeter:Greeter = new Greeter();
  mainText.text = myGreeter.sayHello("Bob");
  
  When I try and test the movie I get 2 errors:
  
  1046: type was not found or is not a constant of compilation: Greeter.

  Quote:
  Posted by: newsgroup user
  I get only one, which is the "Incorrect number of arguments. EXPECTED
  no more 0,' and the reason for this is that the sayHello() method
  is not configured to receive all parameters.

  Under most of the cases I would have been skeptical of the passage of an argument when nothing is defined, but I thought I had heard (way back to AS 2) AS being based on some sort of JavaScript rules so I thought maybe that didn't matter. And unfortunately, this error was not my fault for typing, its actually printed this way in the Flash help (see: getting started with ActionScript > example: creating a basic application).

  We appreciate that clarification, even if I didn't get the error you mentioned. The compiler has never had that long before he released on bail.

  Quote:
  Posted by: kglad
  2. you must register the Greeter Greeter.as class file

  OK, this has proved be the problem... Just on a hunch, I decided to look into the matter. Save the file as [greeter.as/i] errors but off [ Greeter.as/i] does not work. Flash is really sensitive with regard to file names? In any case, I'm a little better. Thank you very much.

• remove a web site that appears next to "getting started" on the menu bar

  A Web site link unwanted icon appears on the bar next to "most visited", "getting started,"latest news"
  and it also appears on my gmail page. I don't know if it's an embed (?) or that it could be called, but it seems a website has invaded my search engine without my permission and I want to remove it and prevent it from happening again. Thank you.

  Hello mocomodoc, CoryMH

  control and click on is the right one for mac and then delete the bookmark.

  Thank you

• Can't watch videos from getting started on 16.0.1 install page with Mac Intel 10.6.8 - no mp4 plugin update?

  Page "Getting Started" for Firefox 16.0.1 has a video window that plays audio only. Test of Firefox for the plugins page shows RealPlayer, Flash, Flip4Mac and Java are up-to-date. What other video plugins are required. I am currently using Firefox 10.0.2 and I am not inclined to update unless I have good reason to do so.

  If that doesn't work in Firefox Safe mode then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try disabling hardware acceleration in Firefox.

  • Firefox > Preferences > advanced > General > Browsing: "use hardware acceleration when available.

• Firefox 8.01 - automatically load the "Getting started with Mozilla... page.

  Firefox 8.01 - whenever I starts, it loads automatically the "Getting started with Mozilla...» "the my home page Tab. How can't we open the tab "Getting started...". » ?

  Hi ricklord303,

  You should take a look at the Knowledge Base How to set the home pagearticle.

  There are the steps in this article to reset your preferences on the default home page. I would try everything first to clear all strangeness. If it works, you can try to set your homepage again to your personal preferences.

  If this does not work you should look at this article on this specific issue and Preferences not savedarticle.

  Hope this helps!

• The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  The tab "Getting started with Mozilla Firefox" (as well as my default homepage on another tab) charge whenever I start Firefox. How can I stop this tab open at the start of the program?

  If the above did not help, then also see the following articles for more suggestions:

  • https://support.Mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • http://KB.mozillazine.org/Preferences_not_saved