Getting subsystem app error XP print spooler
does anyone have a solution to an error message will not be completed in the third step, then he returned throughout the day because it does not end. started the print spooler, stopped, it continues to smoke. been on many Web sites to get answers but are not all find. frustrating problem. be grateful if response could be found. Thank you...
Hi Lynn,
Check to see if this article helps you.
Tags: Windows
Similar Questions
-
Spooler subsystem app error (spooler does not)
None of my printers make their appearance. says "spooler subsystem app error; must be closed.
None of my printers make their appearance. says "spooler subsystem app error; must be closed.
Hey Joanne t
Follow the information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Walter, the time zone traveller
-
I can't print from my computer. This has happened with no other visible defects on the computer or the printer.
When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."
"I did a search on"print spooler"but got no result
Duane
Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver. However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:
AntiMailware MalwareBytes
SUPERAntiSpywareDo not operate the two scans simultaneously. Each will take a long time, so start it and then go do something else for a while.
Cleaning of printers
NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article". Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.
If the suggestions below do not resolve your problem, after back and don't forget to include the following information:
- The version of Windows you have, including service pack (start > run > winver > OK)
- The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
- How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
- It happened just before this symptom started
- What application antivirus you have and if your subscription is up to date and has been maintained continuously
- The full text of the error messages related to printing, without paraphrasing
A. Clean on print jobs pending
- Open a command prompt window (start > run > cmd > OK)
- Type the following in the black command prompt window, and then press ENTER after each line
net stop spooler
del/q '% windir%\system32\spool\PRINTERS\*.* '.
net start spooler
outputB. clean the old printer drivers and install the latest drivers by using the directions in One Article. If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
-
I have a Canon MG5220 printer. I can print from my wireless on my laptop that runs windows 7.
Hello
- What is the full error message?
- All changes made to the computer before the show?
Check out the link and follow the steps.
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894Important registry This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
-
I tried to delete all software, including drivers and then reinstall but have had absolutely no success. I should mention that I use a Lexmark printer and supposedly there are hidden drivers files that cannot be deleted. Any help would be appreciated
Hello
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------
Check with Lexmark Support and drivers
Lexmark - Support
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_USLexmark - drivers
http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=downloadI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Spooler SubSystem App error in windows xp
I am running windows xp and have had a HP photosmart printer installed for over a year. From now on I get the error: Spooler SubSystem App has encountered an error. I can print the screen and print from IE8, but whenever I try to print from Adobe Pagemaker I get this error.
Adobe has a forum for all their products, including PageMaker:
http://forums.Adobe.com/community/pagemaker_general
I've never seen your problem, but if you search the forum Adobe PageMaker for:
Spooler Subsystem App
You will see that you are not alone and find some discussions that involve more than one printer HP and PageMaker and maybe some of these ideas will be a source of inspiration or help.
If you find nothing inspiring, I post there and see what they have to say.
Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Keep to spooler subsystem app error message.
I get an error message which announces that windows are closed spool subsystem app for reasons of security sikke, all printers are removed from my computer and it is not possible to install new, Microsoft can fix or should I switch to mac computer where this problem does not occurHi lille lt.
1. What is the full error message that you receive?
2. don't you make changes on your computer before this problem?
3. when exactly you receive this error message?
You can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know. -
Error: OxOOOOO6ba print spooler
Whenever I try to start the printer, I get the format of the message "Print Spooler SubSystem stopped working and closed" in a MS Windows...
I tried everything I have seen on this and still can't seem to get the problem solved... I need my printer... I use a HP DeskJet printer
1341.help!
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
The value of all Services back to their default values.
Start - type into the search box-> Services find top - make a right click on - RUN
AS AN ADMINISTRATORBlackViper - for Vista SP1 - Services - all return to their default values.
http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020BlackViper - for Vista SP2 - Services - all return to their default values.
http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------
Also check with HP support and forums.
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Error: 0x000006ba print spooler problem
I get this error msg when I try to sing on my printer... I tried what you did to try and
solve the problem, but I get the message and cannot use the prionter...
Hello
Check with the printer manufacturer for updated drivers and support for known issues.
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
If the above didn't help:
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administratorStart - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">-->
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - Classic - printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Print Spooler service
http://www.blackviper.com/WinVista/services/Print_Spooler.htmHow difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
------------------------------------------------------
Clean the General corruption and repair or replace the damaged/missing files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228CheckDisk (chkdsk) runs at startup.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
'Error 0x800706b9' print spooler error boot HP Pavilion desktop pc 500-054
I have a HP 500-054 desktop PC
Windows 8.1
My print spooler not working and I've done everything I know to do... when I went to try to restart the print spooler I got this message:
Error: 0x800706b9 lack of resources is available
How can I fix?
Help, please...
Hello again @Shecouldbme,
At this point, I would recommend contact you please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I want to thank you for display on the HP Forums. Have a great day!
-
I use windows xp and have tried to download a printer driver, but I get a message that says that my spooler has stopped. I tried to restart my spooler but received an error message 1068. Can someone help me with this problem?
If you no longer use the LexMark printer, you can specify the Spooler Service there only addictive and which would be the RPC Service.
When you query the spooler to print from the command prompt, have you given that the is no longer necessary dependence LexMark listed? If so, you must get rid if it if you do not need.
It is easier to say just the print spooler that it depends on (that would be the RPC Service).
To do this, from your command prompt, enter the following command:
the sc config spooler depend = rpcss
Be sure to include the space after the "equal" sign, or the command does not work.
Then, when you query the dependencies of print spooler again, you should see the only listed dependency is the rpcss Service.
Start your print spooler now and together it automatic if that is your desire, then reboot your system and check the spooler Service again to make sure the changes "stick" a reboot.
-
How to get rid of LexBce Server print spooler Dependencies tab
I uninstalled the old Lemark printer using uninstaller for it, however, I now have an error 1068: the dependency service or group could not start when I try to install a new printer. When I ran services.msc and went to the print spooler element, I noticed that the service has appeared as "automatic". While they inspected again under
the Dependencies tab, the following is still listed: LexBce Server. I do not know which refers to Lexmark how do I remove it? And then what to do next?
Get to a prompt command as follows:
Click Start, run and enter in the box:
cmd
Click OK to open a command prompt window.
Run this command to see the current Spooler Service dependencies:
sc qc spooler
You can't really 'delete' the dependence of Lexmark, so tell you just the Spooler Service depend on that remote procedure call (RPC) service (this is the default value).
To do this, enter the following command:
the sc config spooler depend = rpcss
Be sure to include the space after the "equal" sign, or the command does not work.
Query the spooler to be sure Service again it works then:
sc qc spooler
XR | GetServiceConfig SUCCESS
Service_Name: Spooler
TYPE: 110 WIN32_OWN_PROCESS (interactive)
STARTUP TYPE: 2 AUTO_START
ERROR_CONTROL: 1 NORMAL
BINARY_PATH_NAME: C:\WINDOWS\system32\spoolsv.exe
LOAD_ORDER_GROUP: SpoolerGroup
TAG : 0
Display_name: Print spooler
DEPENDENCIES: rpcss
SERVICE_START_NAME: LocalSystem -
Error: Windows print spooler is not running when you try to add the HP printer wireless
I'm trying to start the Windows printer spooler and do not know how. Can anyone help?
Thank you
Original title: I TRY to ADD a PRINTER of HP WIRELES in MY PORTABLE AND I GET AN ERROR MESSAGE THAT SAYS THAT my WINDOWS PRINT SPOOLER NOTR IS RUNNIN'. How can I START THE SPOOLER?
Hi Samsodano,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: You can run the Microsoft Fixit to the below mentioned link and check if it works.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/en-us
Method 2: You can consult the following Microsoft article Knowledge Base and follow the steps in the article to resolve the problem.
You cannot add a printer and you receive Printer Spooler error messages in Windows XP
http://support.Microsoft.com/kb/324757
Let us know if it helps.
-
Original title: print spooler could not be started
Trying to install a printer. Get "error 1920 Service print spooler (spooler) could start. Can you please help?
Hi phil195golf,
1. What is the brand and model of printer?
Try these steps and check if the problem persists.
Step 1: Run Microsoft Fix to diagnose the problem
a. see you can not add a printer and you receive spooler printer in Windows XP error messages
b. click Microsoft hotfix and run the tool successfully.
c. restart the computer.
d. install the printer and check if the problem persists.Step 2: If the problem persists, install the printer by turning off all non-Microsoft programs
see How to configure Windows XP to start in a "clean boot" State .
b. follow steps 1 and 2.
c. installing the printer and check the result.Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Printer spool error 'local print spooler service is not in the course of execution-restart spooler'
Coil Sprinter restartmy computer crashed few, but I lose my software. I replaced my card m? ire and a neighbor, HE got most of my programs and the work of electronic mail. I'm having a problem with my printer spool. The message I get is "local print spooler service is not currently running-restart spooler. And 0 x 80040707 error DLL function call crashed: Braddprt.check local port. "Then, I got an update that does not work for my brothers printer. Can someone help me?
Hi Gin99,
· The printer is already installed?
· Or do you have the error during the installation of the printer software?
Try the following.
Method 1: Run the next Fixit tool and see if it helps.
Problems printing and printing errors
Method 2: Follow the steps in the article mentioned below.
Maybe you are looking for
-
HP PSC 1350V need to reinstall the software
I want to reinstall my software and can't seem to get rid of the old installation. Running Win XP Edition family. If I try to remove the software and try to reinstall, it indicates a newer version is already installed. I downloaded the drivers update
-
I use my PC for gaming if im wondering if upgrading to windows 10 remove all my games installed? and if I can I return to widows 7 without having to reinstall completely?
-
How to send an email to the project mobile flex for blackberry playbook?
Hello friends, I developed a small application for playbook. I want to send an email, use adoble flash builder burrito, there is no built-in functions available to send emails in flex 4.5, it can be achieved throug php, cold fusion, or asp.net. I don
-
Ramp for users folder does not
I'm trying to move my users folder to another drive on my SSD drive by using this procedure: http://Lifehacker.com/5467758/move-the-users-directory-in-Windows-7 This procedure has worked well for me before, but I had a hard drive crash and had to ref
-
The options for the trial of Cloud are join or continue the trial. The trial period is over and so gray. CS6 stops and I have no usable program.Any idea?