Getting values of input columns, a table before to commit that table

Similar Questions

• After select stmt. why the count value of variable column, nested table is zero.

  CREATE OR REPLACE TYPE numbers_type
  ARRAY OF INTEGER
  /
  CREATE OR REPLACE PROCEDURE p(i) in FULL IS
  numbers1 numbers_type: = numbers_type (1,2,3,4,5);
  BEGIN
  DBMS_OUTPUT. Put_line ("exposed before SELECTING");
  DBMS_OUTPUT. Put_line('numbers1.) COUNT() = ' | numbers1. COUNT());
  FOR j IN 1.numbers1. COUNT() LOOP
  DBMS_OUTPUT. Put_line ('numbers1 (' | j |)) ') = ' || numbers1 (j));
  END LOOP;
  -Auto selection clause to COLLECT LOOSE:
  SELECT a.COLUMN_VALUE
  LOOSE COLLECTION numbers1
  TABLE (numbers1) one
  WHERE a.COLUMN_VALUE > p.i
  ORDER BY a.COLUMN_VALUE;
  DBMS_OUTPUT. Put_line ("presentation and SELECT '");
  DBMS_OUTPUT. Put_line('numbers1.) COUNT() = ' | numbers1. COUNT());
  END p;
  /
  Call p:
  BEGIN
  p (2);
  END;
  /

  Hello

  Before taking in the collection variable, the values of the variables are fushed. So in this case the numbers1 is empty so it becomes zero and trying to read values from this collection which is already empty.

  That's why you get the number zero

  PRABHU

• Getting value of text to a table, a table

  I have two tables, we create x amount of boxes for the user to enter text in and another 'prints' the data in text boxes.

  My problem: when I create the second table it creates the boxes, and I need to retrieve the value of text out of the first table.

  IM from the difficulties to find the right directory and use it with the loop

  printAryblk [PBArr [i]] .text = MovieClip (parent).blockoff.blockinpts.textArray100 ["a" + i] .text;   It's the broken code

  I know my designations are off and I'm not sure how it specify properly.

  var printAryblk:Array = new Array();

  for (var i: int = 0; i < Printbloklin; ++ i)

  {

  trace (PBArr [i]);

  printAryblk [PBArr [i]] = new TextField();

  printAryblk [PBArr [i]] .name = PBArr [i];

  printAryblk [PBArr [i]] = 500 there.

  printAryblk [PBArr [i]] .x = 160 + (I * 15 +. width.blockoff.blockinpts.textArray100 ['one' + i] MovieClip (parent));

  printAryblk [PBArr [i]] .width = 14;

  printAryblk [PBArr [i]] .Guy = TextFieldType.INPUT;

  printAryblk [PBArr [i]] .height = 30;

  printAryblk [PBArr [i]] .autoSize = TextFieldAutoSize.LEFT;

  printAryblk [PBArr [i]] .defaultTextFormat = PrintBlockF;

  printAryblk [PBArr [i]] .text = MovieClip (parent).blockoff.blockinpts.textArray100 ["a" + i] .text;   It's the broken code

  addChild (printAryblk [PBArr [i]]);

  }

  var textArray100:Array = new Array();

  for (var i: int = 0; i < maxBlokLinne; ++ i)

  {

  trace (blockArr100 [i]);

  textArray100 [blockArr100 [i]] = new TextField();

  textArray100 [blockArr100 [i]] .name = blockArr100 [i];

  textArray100 [blockArr100 [i]] = 0 there;

  textArray100 [blockArr100 [i]] .x = 0;

  textArray100 [blockArr100 [i]] .width = 8.5;

  textArray100 [blockArr100 [i]] .Guy = TextFieldType.INPUT;

  textArray100 [blockArr100 [i]] .height = 30;

  textArray100 [blockArr100 [i]] .autoSize = TextFieldAutoSize.LEFT;

  textArray100 [blockArr100 [i]] background = true;

  textArray100 [blockArr100 [i]] .backgroundColor = 0x86A798;

  textArray100 [blockArr100 [i]] .border = true;

  textArray100 [blockArr100 [i]] .defaultTextFormat = myFormat100;

  addChild (textArray100 [blockArr100 [i]]);

  }

  It's a little hard to tell who are the paintings, you have a problem with... it seems maybe four of them in your code.

  Apart from that, the line that show you in red appears to try to use the text of something that does not yet exist and where there is no he could not exxist where you target is... textArray100 [any] does not seem to have created up to the next loop, so it can not ecist in the first... and you're just using addCHild to plant it after its creation While in the previous loop you target through MovieClip quelque.blockoff.blockinpts (parent) can be

• Getting value of demand in dynamic action "before"?

  v4.1.1.00.23
  
  I have a dynamic action that I shot "before all present" and execution of Javascript. I would like to be able to assess the value of the request in my javascript and so far have not been able to do. & APPLICATION. comes with nothing (empty string) like $v (pRequest). (Probably these are referencing the value of the application of the time the page was posted and not the value of the request from the button I'm clicking now to send the page?)
  
  But if debugging run on the page, the first thing he says is:
  
  0.00150 0,00433 a C C E P t: request = "SAVE."
  
  If the value of the claim to 'RESCUE' is there somewhere.
  
  I guess I can write AJAX for session state, but that seems rather ridiculous to me. Looks like it must be readily available, right? How?

  What is

  this.data
  

• Extraction of values based on column names

  Hello

  I have three tables. Table A table contains a column with all column_names in the table b. table B is to have an emp_id and other fields that are stored as values in the column of the TABLE.  I need to get the emp_id and value from the column of table B based on data of Table A. and store it in another table.

  Example:

  Table has -col1

  Emp_name

  Emp_sal

  Emp_dept

  Table B

  Emp_id Emp_name Emp_sal Emp_dept

  1001 ABC 1000 sales

  1002 XYZ 2000 SVC

  TABLE C

  Emp_id Emp_details value

  1001 Emp_name ABC

  1001 Emp_sal 1000

  1001 Emp_dept sales

  1002 Emp_name XYZ

  1002 Emp_sal 2000

  1002 Emp_dept SVC

  Using the list of TABLE A, I have to select each Id and corresponding to the value of TABLE B and even insert in TABLE C. I know that we can use a loop for, but I have trouble choosing the name of column based on the value of the slider. Can anyone help?

  
  

  Hello

  Looks like you want to do 2 things rather difficult:

  (1) unpivot data from several columns in the column 1 value

  (2) get the column names for the another table unpivot operator

  Let's start with how you could do just part 1, unpivoting data:

  INSERT INTO table_c (emp_id, emp_details, value)

  WITH all_varchar2 AS

  (

  SELECT emp_id

  emp_name

  TO_CHAR (emp_sal) AS emp_sal

  emp_dept

  --Include all columns, you might need

  OF table_b

  )

  SELECT emp_id, emp_details, value

  Of all_varchar2

  UNPIVOT (value

  FOR emp_details IN

  (emp_name - dynamic

  emp_sal - dynamic

  emp_dept - dynamic

  )

  )

  ;

  Value is a column, everything happens in this column must have the same (or a very similar) data type.  The subquery all_varchar2 converts all columns that you can rotate in VARCHAR2s (if they are not already VARCHAR2s) so that they are ready to rotate.  You might consider doing a permanent display for this.

  Now, instead of hard-Ghoshal the 3 line marked "Dynamics", you seek to table_a.  You will know beforehand what are these columns, and you won't even know there will be the number of columns. You need instructions SQL dynamic to write this part of the INSERT statement for you at run time.

  Here's a way to do it in SQL * more and SQL:

  -The preliminary motion

  COLUMN col_list_col by col_list new_value

  SELECT LISTAGG (col1, ',') within THE GROUP (ORDER BY col1)

  AS col_list_col
  FROM table_a;

  -Main return (dynamic):

  INSERT INTO table_c (emp_id, emp_details, value)
  WITH all_varchar2 AS
  (
  SELECT emp_id
  emp_name
  TO_CHAR (emp_sal) AS emp_sal
  emp_dept
  --Include all columns, you might need
  OF table_b
  )
  SELECT emp_id, emp_details, value
  Of all_varchar2
  UNPIVOT (value
  FOR emp_details IN
  (& col_list
  )
  )
  ;

  Dynamic SQL often works like this.  First, you make a preliminary motion to write the part that is not know before execution.  Then, you run the main statement, which has the integrated preliminary query results.

  If you do this in PL/SQL, you use a string variable ordinary for col_list, instead of a substitution variable.

• Option required for the input column, turning off all other features

  Hello
  
  I have a JSF page that contains a VO, where some are output columns and others are columns of entry.
  I gave required: = True to the input (in the property inspector) column and creates a delete (as a button) operation for every row of VO, works very well.
  
  When I get back the input value and pressing the delete operation, works well.
  
  How can I remove the line even without grasping the value of input column... ?
  
  Note: with to enter the value, if we carry out any operation on the page (such as clicking on the buttons) it will first trigger dialog "enter the value.
  
  
  Kind regards.

  Try to 'immediately' property to true in your button remove to ignore the validation phase.

  Kind regards.

• Updating values in a column

  Hello

  I am new to Oracle. I was testing some queries and accidentally changed the values in a column special and done a COMMIT. I need to change the values in this column (INSTANCE_ID) back to what it was. Fortunately, there are just 4 rows, I need to change the values of (cos it is based on a unique ID). I am unable to change it. Please any help would be appreciated. What is the good query to run for this?

  The column that needs to be changed-

  Of

  INSTANCE_ID CAPA_ID

  10979360 MS-030091

  10979360 MS-030091

  10979360 MS-030091

  10979360 MS-030091

  TO

  INSTANCE_ID

  10979360 MS-030091

  10979134 MS-030091

  10979348 MS-030091

  MS 11161903 - 030091

  Grateful for your help!

  Thank you very much for your answers! I went directly to the modified table of values in the INSTANCE_ID column and validation to success, went and ran a SELECT query in my editor, the values are changed and it worked!

• SQL query to find the value of a column as well!

  Hi all
  
  I have to write a query that needs to retrieve the value of a column in table B if the column value is Null in the Table A. Please find below the sample table.
  
  Table A:
  *******
  EmpNumber ID
  ------------------------------
  1 12345
  2
  3 14789
  4
  5 74563
  
  Table B:
  *******
  EmpNumber ID
  -----------------------------
  1 12345
  2 78451
  3 14789
  4 12212
  5 74563
  
  In the table a second and third rows have value for EmpNumber. The query should look for table B for EmpNumber value. Please advise me to make this request.
  
  Thank you

  This?

  select      a.id,
       nvl(a.empnumber,b.empnumber) empnumber
  from tabA a, tabB b
  where a.id = b.id;
  

• Starting from two data tables, how do you get the values in two columns using values in a column (values get col. If col. A is not null values and get the pass. B if col. A is null)?

  Two tables provided, how you retrieve the values in two columns using values in a column (the pass get values. If col. A is not null values and get the pass. B if col. A is null)?

  Guessing

  Select nvl (x.col_a, y.col_b) the_column

  from table_1 x,.

  table_2 y

  where x.pk = y.pk

  Concerning

  Etbin

• value of selectOneChoice in the table gets reset to true visible table

  I have a table with 2 columns. 1 column a inputtext A and another selectOneChoice B.

  Also, I have a selectOneChoice more C above this table. On the "X" value in the drop-down list selection, the table above becomes true visible.

  But at the same time, the selectOneChoice B reset to a value of zero instead of having the value extracted from DB.

  A inputtext has no effect. It displays the value extracted from DB.

  If we say that the table are refreshing causing to reset selectOneChoice B. It is seems to be wrong. Below this table, I have 2 button to add and remove rows from the table.

  Add / delete, table gets refereshed but selectOneChoice B loses its value.

  Before the page loads, set the bean attribute which is used to visible.

• How to calculate the sum of the values of some columns in a table

  Hello

  I want to get the column just the average of the values of some columns not all columns of the table.what I have to change exactly in this block diagram.even if the table size is 25 average, I want the division as the number of values in each column (= number of lines)

  

  just like that:

  

  
  

• TMS implemented at level 14.1.1 to 'Get SNMP community name' column does not allow NULL values.

  Hello!

  I had a TMS12.2 (via 12.6 and 13.2) to TMS14.1.1 upgrade.

  When I go to: systems > overview of the system and select all systems and all the settings, I get an error message.

  An order referred before you have a problem with the values of ip box.

  Is it possible that 14.1 upgrade does not correctly check if the empty database fields?

  How I'll fix it, did an upgrade using 14.2, or is it a sql command that must be executed

  (or some values to be defined)?

  Error details:
  Server Error in '/tms' Application.
  --------------------------------------------------------------------------------
  Column 'SNMP Get Community Name' does not allow nulls.
  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
  Exception Details: System.Data.NoNullAllowedException: Column 'SNMP Get Community Name' does not allow nulls.
  Source Error:
  An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
  Stack Trace:
  [NoNullAllowedException: Column 'SNMP Get Community Name' does not allow nulls.]
  System.Data.DataColumn.CheckNullable(DataRow row) +2131738
  System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent) +5073836
  System.Data.DataTable.SetNewRecordWorker(DataRow row, Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException) +195
  System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID, Int32 pos, Boolean fireEvent) +344
  Tandberg.TMS.UI.SystemOverview.ViewSystemOverviewGrid.CreateDataSource(EmbedLinksSetting embedLinks) +6856
  Tandberg.TMS.UI.SystemOverview.ViewSystemOverviewGrid.DataBindToTMSGrid(EmbedLinksSetting embedLinksSetting) +171
  Tandberg.TMS.UI.SystemOverview.SystemOverviewView.SystemOverviewViewDataBind(EmbedLinksSetting embedLinksSetting) +196
  Tandberg.TMS.UI.SystemOverview.SystemOverviewHost.ShowModule(ModuleActions moduleAction) +115
  Tandberg.TMS.UI.SystemOverview.SystemOverviewHost.systemOverviewFilter_ModuleAction(Object sender, ModuleControlEventArgs e) +43
  Tandberg.TMS.Service.Navigation.TMSModuleBase.FireModuleEvent(ModuleControlEventArgs e) +22
  Tandberg.TMS.Service.Navigation.TMSModuleBase.FireViewAction() +34
  Tandberg.TMS.UI.SystemOverview.SystemOverviewFilter.viewButton_Click(Object sender, EventArgs e) +65
  System.Web.UI.WebControls.Button.OnClick(EventArgs e) +118
  System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +112
  System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +10
  System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +13
  System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +36
  System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5563
  

  Hi Martin,

  You see flaws CSCue22625. A fix was published in TMS 14.2.

  Kind regards

  Kjetil

• Display the value of the column automatically based on another column in a table

  Hello

  I use APEX 5.0, I have a requirement to display the field automatically based on the tabular presentation of other numbers.

  

  in the screen shot attached above when I press Add button line a new line is created and enter the value in 'place no.', 'dept and identification of height place' when I press tab or get out of the column "height", "GID" should appear automatically.

  To display the GID my query will be like that. "Select GID from x where no = '1011' place and dept = 88 and height = 88'.

  How to get the value of from GID of the another value entered in Place no, dept and height in tabular form.

  Thanks in advance

  Ravi.

  Hi Ravi

  No need to point of Application or process. I just completed the task with the following steps

  (1) create 4 hidden items

  P2_SELWID

  P2_SELDEPTH

  P2_SELHEIGHT

  P2_CALCWNAME

  (2) gives 3 CSS classes in three columns of tables.

  . WID

  . DEPTH

  . HEIGHT

  (3) create the function jQuery for re - get three items from the page on a line if one of them has been changed.

  Add the following code to the function and the declaration of global variables

  function setRowItemValues(p_rownum){
      wid_col_id = 'f02_' + rownum ;
      wid_col_val = $('#'+wid_col_id).val();
      depth_col_id = 'f03_' + rownum ;
      depth_col_val = $('#'+depth_col_id).val();
      height_col_id = 'f04_' + rownum;
      height_col_val = $('#'+height_col_id).val();
      wname_col_id = 'f05_' + rownum;
      // set P2_SELWID,P2_SELDEPTH,P2_SELHEIGHT
      $s("P2_SELWID", wid_col_val );
      $s("P2_SELDEPTH", depth_col_val );
      $s("P2_SELHEIGHT", height_col_val );
      $s("P2_SELWNAMEID", wname_col_id );
      // Call the Dynamic Action to get WNAME if all values are not null
      if( wid_col_val != ''  && depth_col_val != '' && height_col_val != '' ){
          //Call DA to Get WNAME from WINT
          $.event.trigger("CalcWNAME");
          // set the Tabular form
          $('#'+wname_col_id).val($x("P2_CALCWNAME").value);
      }
  }
  

  and run when the Page loads

  $(document).on("change", ".WID,.DEPTH,.HEIGHT", function(){
      rownum = $(this).attr('id').substr(4);
      setRowItemValues(rownum);
  });
  

  (4) create a dynamic Action to get WNAME based on a PL/SQL function. Note the submitted page elements.

  CalcWNAME

  (5) set of the corresponding element in the line of the function jQuery, after completing the DA.

  Please check and I hope your problem is now solved.

  Concerning

  Mahmoud

• How to map the entered value of attribute column to another attribute in the table for each row.

  Hi Experts ADF,

  JDev 12 c.

  I create a button and a table below. If the user clicks on the button create, I invoke CreateInsert. The new line now appears as an editable fields.

  So I suppose I have a column that is displayed in editable mode. If the user enters values in that. Has another column B whose value is not displayed in the UI must have the same value as the column.

  This occurs for each row added. During the click on save if user entered 2 in column A, then the value in column B must be same 2.

  Thank you

  Roy

  There is more than one way, for example:

  Generate ViewRowImpl Java class (with generate audited accessors) you will get for an attribute setter.

  Change the Set accessor to set the attribute B (IE, calling setAttribute ("B", value)) after setting a value

  OR, write valueChangeListener for inputText representative and set the B attribute to the same value

• Change the default value of some columns in an oracle 11g table

  I have a table called cust_file, its table consists of a large number of columns (one of these columns called cus_tax) and have a lot of data.

  I use oracle 11g, I want to change the default value of the column cus_tax is equal 1.

  I wrote

  ALTER TABLE cust_file MODIFY (1 by DEFAULT cus_tax).

  
  

  Table changed
  

  
  

  but after I inserted new data to test the operation, I found that the new record has a value = null for the column cus_tax

  
  

  then I tested it using the following query

  
  

  Select data_default in the all_tab_columns where table_name = 'CUST_FILE' and column_name = 'CUS_TAX ';

  no selected line

  
  

  so please help me to change the default value of the cus_tax column.

  
  

  
  

  Thanks for any help.
  

  
  

  
  

  > but after I inserted new data to test the operation, I found that the new record has a value = null for the column cus_tax

  If the INSERT included a NULL value for the column, the GET of a NULL inserted by default substitution.

  SQL > create table hkc_test_10 (id_column number, data_col_1 varchar2 (5), data_col_2 varchar (5));

  Table created.

  SQL > insert into hkc_test_10 values (1, 'First', 'F');

  1 line of creation.

  SQL > select * from hkc_test_10 by 1.

  ID_COLUMN DATA_ DATA_
  ---------- ----- -----
  1 first F

  1 selected line.

  SQL > alter table hkc_test_10 change (data_col_2 default 'TRUE');

  Modified table.

  SQL > insert into hkc_test_10 values (2, 'Second', NULL);

  1 line of creation.

  SQL > select * from hkc_test_10 by 1.

  ID_COLUMN DATA_ DATA_
  ---------- ----- -----
  1 first F
  2 second

  2 selected lines.

  SQL > insert into hkc_test_10 (id_column, data_col_1) values (3, 'Third');

  1 line of creation.

  SQL > select * from hkc_test_10 by 1.

  ID_COLUMN DATA_ DATA_
  ---------- ----- -----
  1 first F
  2 second
  3 third TRUE

  3 selected lines.

  SQL >

  Hemant K Collette