Ghost 7.0 and VMware Workstation 6.5.2

Similar Questions

• file VHD and VMWare workstation 6.5

  Hello

  I'm trying to convert a .vhd MS (the only file I have) of VMware.  I tried the Conveter v4.0 and VMWare workstation 6.5, and they do not support this.

  Has anyone tried that?

  Thank you

  Jean

  Try Starwind converter

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Certificate expired on a server that has only the client VMware and VMware workstation

  Our scanners detected security certificate expired vmware on a server. The only products currently running on this server are VMware workstation and the vSphere client. I looked in all the installed certificates and their lack of vmware. When I open a web browser and go to the IP address of servers using port 443 I get a message of invalid certificate and look a certificate it shows expired recently, and was published by VMware. Where can I find this certificate and what is used to indicated the products installed on this system?

  The certificate was for workstation server configurations (connection sharing VMs/Remote). Just disabled the sharing feature because it is not used.

  Find the certificate in the program data-file VMware. Could not find information on renewal, only how to replace it.

• Visual Studio 2012 and VMWare workstation plugin does not work

  Today we moved to Visual Studio 2010 Visual Studio 2012 in our project.

  After installing VS2012, I installed VMWare workstation 9. To my surprise, it did not appear any menu in Visual Studio VMware. In the previous version, the menu item will automatically appear by the installation of VMWare. We use the VMWare plugin to debug Visual Studio applications on the virtual machine remotely.

  Does VMWare workstation 9.0 support Visual studio plugin for VS2012?

  My version of VMWare is 9.0.0 build-812388 and my version of Visual Studio is Visual Studio Premium 2012, 11.0.50727.1 RTMREL.

  The VS plugin that comes with 9 Workstation does not load in VS 2012 due to some changes in the interface COM vs.  The next update to 9 Workstation will correct this problem.

• Update of VMware ACE and VMware Workstation

  I bought VMware ACE there a few times and got VMware Workstation 6.5.0.

  I always use VMware Workstation 6.5.0 to protected generateACE packets.

  Can I update WMware Workstation version update (say 6.5.3) without losing the ACE capabilities?

  Can I update ACE as well?

  Am I entitled to upgade to WMware Workstation 7 without having to buy it again?

  Concerning

  Marius

  You can update 6.5.3. without any problem.

  But you cannot use vmware workstation7 since the license that you purchased (6.5) does not work with the 7 workstation.

  Also, you cannot use the old license for the new version of the vmware ace management server.

  John

  vmred.nl

• Windows 7 64-bit and VMWare Workstation

  Someone had problems with VMWare Workstation 6.5 on Windows 7 64-bit? My computer hangs when creating the virtual machine guests. I have VirtualBox running very stable with Windows 7. I was wondering if anyone has had problems? I think try VMWare Workstation 7.

  Yes, my Dell PC meets all the requirements. I enabled VT, 2-2CoreDuo 3.06 Ghz CPU, 8 GB of RAM, 1 TB SATA, Windows 7 64-bit.

  Your comments are welcome!

  Thank you

  EC

  Windows 7 as a host is not supported up to what VMware Workstation 7. You can run Windows 7 as a GUEST/VM under WS 6.5.3, but not as the host. You can use the guide to compatibility/guest conductor OS here: http://www.vmware.com/resources/compatibility/search.php?deviceCategory=software to see for yourself...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• What is the difference between VMware Player and VMware Workstation?

  I'm new here. I don't know what the right place to post this. My question as the title. Please guide me.

  With VMware Workstation you can create new virtual machine with VMware player, you can't.

  You can also check this post Why buy Workstation when the server or player is free?

  If you find this information useful, please give points to "correct" or "useful".

• High resolution monitor and VMware Workstation, causing the system to hang

  I usually like VMware / WS... I used VMware / WS for many years with problems little / not serious - until recently.

  I'm under WS 6.5.1 on MS/Windows/XP/Pro/SP2 (host), and 2 guests of virtual machines: RHEL4 and MS/Windows/XP/PRO.

  Recently I bought a SAMSUNG T260 (1920 x 1200) high-resolution screen - I really like (I also used SAMSUNG monitors for many years with little / no serious problems).

  Currently, I am frequently (several times a day) see the two VMware / WS (all guests) and my XP any host COMPLETELY FREEZES up.  The only way out of this is perhaps a shutoff of the system and then restart.

  Needless to say it is (IMHO) a OFF THE CHARTS SERIOUS PROBLEM... with all fingers pointing to VMware / WS (TBD).

  Previously, I was running on a HP low resolution screen 1280 x 1024.  I can run for days/months/still without seeing the problem above.

  Also, I believe many/most/all lower resolution monitors is likely no other problems (be it).

  This is a 'system to freeze the scenario:

  1 pass to MS/Win/XP vm host RHEL (mode full-screen)

  2. press quickly on full screen non-plein screen

  3. If I do the above too fast my entire army system freezes up.

  Any body else see something like that?  Any ideas/help/suggestions will be appreciated.

  Mark

  PS/BTW - I've seen this problem originally under 6.0.3

  Are you running the latest drivers for your videocard host?  Video drivers are complex enough that they almost always end up containing pretty serious bugs and VMware video cards use is broad enough for us fires frequently these questions.  If upgrading the drivers didn't help not can you let us know:

  -What graphics card and cpu type is your host machine?

  -Don't you update of tools in two virtual machines?

  -What is your workload, particularly in the XP VM?

  -3D acceleration enabled in the XP VM is?

• Hyper-V e VMWare Workstation

  Como FACO pra rodar o Hyper-V e o VMWrae Workstation no meu tempo portable ao mesmo?

  Obrigado.

  NAO tenho certeza 100% to e possible executar os have to ao mesmo tempo, very uma Solução minestrone e criar uma entrada no BCDEDIT para exportar o Hyper-V, e quando Chipre usar o VMware Workstation, iniciar sua com o Hyper-V aprarece Estação.

  Aqui um post com os details: http://www.ivobeerens.nl/2013/12/16/running-hyper-v-and-vmware-workstation-on-windows-8-x/

• Update Windows 10 November (10586 aka 1511): bcdedit/set hypervisorlaunchtype off, but VMware Workstation does not start VMs with conflict of Hyper-V

  Hi all

  I upgraded from Windows 10 Windows 10 November updated this morning.

  I have the Hyper-V role is installed and use it from time to time, but bcdedit to configure the boot loader to disable Hyper-V by hypervisorlaunchtype power off.

  This technique has worked with 10 Windows and VMware Workstation and I could start and run virtual machines

  Since I did the upgrade, I can't start VM with this standard message "VMware Workstation and Hyper-V are not compatible"

  I am running VMware Workstation 10, but suspect that this problem also exists with later versions.

  Everyone knows about this problem?

  Someone at - he found a solution?

  I'm willing to fork over $150 for 12 workstations to solve this problem, but I want to know with certainty that it is circumventing my problem.

  Thanks for that.

  Uninstallation and reinstallation of the hyper-v feature, following the upgrade of Windows Windows 10 November 10 update solved the problem.

  I still need to run the following command to disable the Hyper-V technology

  bcdedit/set hypervisorlaunchtype

  Thanks to everyone for their help.

• I have a problem starting up a Windows XP Pro Machine virtual Windows 8 host system (which has VMware Workstation 10.1).

  I am new to the virtual machines.  For several months I've been running a Windows XP Virtual Machine in an old machine of Windows 7 with VMware Workstation 7.0.  The hard drive is having some problems at times, so I thought that I could move the virtual machine on a new computer that has an OS 8.1 Windows and VMware Workstation 10.  For example, on the Windows 7 machine, I copied the directory with all the * .vm files and pasted into the machine to Windows 8. But when I tried to start VMware Workstation 10 in Windows 8 machine, I got the message "this virtual machine policies are too old to be run by this version of VMware."  I went to the knowledge base and used the solution described here: I've deleted the lines of three 'policy' of the .vmx file and added the suffix .ancien to the .vmpl file, which actually disabled.  Now, when I try to start the virtual machine, the black screen appears with the VMware logo in the Center and everything seems fine, but Windows XP starts.  And logo VMware guard churning away as in a continuous loop.  It is not easy to stop.  The only way to stop VMware is via the Task Manager or restart the machine.

  What must I do to get the Windows XP Pro VM to run in the new machine?

  VMWare technical support suggested that I have disable 3D acceleration (VM > settings > view and uncheck the box 3D graphics acceleration).  The virtual machine starts now with some minor problems, but it is usable.  But by closing accel 3D turns, in the words of the Technical Support Engineer, David, that there is "a problem with the graphics card not imitate or through its capacity to the virtual machine.  In other words do not support to the VM guest 3D acceleration. "My next step is to make sure that I have the updated driver for the Intel HD Graphics 4600 display adapter.

  Minor problems are:

  (1) the virtual machine works best in screen mode reduced.  There are a few problems speed mode full-screen.

  (2) the VM will still work after switching on of the host.  But after execution of the virtual machine, if power you the virtual machine and the release of VMware workstation, then later, start the workstation, the virtual machine will power not.

  To turn it on again you must out of VMware Workstation, disconnect the host machine and then reopen it in one.

• USB foot pedal problem (Infinity IN-USB-2): recognized by Windows but does not work on VMware Workstation 10

  When I connect an Infinity IN-USB-2 pedal for my guest Windows 7 Professional (on Ubuntu 14.04 and VMware Workstation 10.0.2), the pedal gets recognized by Windows and different applications, but by pressing the pedal itself has no effect.

  I downloaded a USB foot pedal Tester (http://vec-infinity-in-usb-1-foot-pedal-tester.soft112.com/) on the client and he acknowledged that the device is connected, but when I pressed on any of the three pedals, the tester has not detected the presses.

  I tried the pedal on a real Windows computer, and it worked fine.

  When I connect the pedals, even with the guest in the foreground, VMware Workstation will appear a dialog box:

  The specified device is claimed by another (usbhid) driver on the host operating system. The device can be used. To continue, the appliance will be first disconnected from its current driver. [Cancel] [OK]

  When I click 'OK', we state above: Windows recognizes that the device is connected, but foot-presses are not detected. My other USB devices are not pop this dialog box. (Click Cancel maintains the device disconnected from the guest.) I don't know if the dialog box is significant or a red herring.

  Here's what/var/log/syslog says when I connect the pedal with the Windows client in the foreground:

  kernel: [281434.822751] usb 2 - 1.7: new low speed USB device number 28 using ehci-pci

  kernel: [281434.920667] usb 2 - 1.7: new USB key found, idVendor is 05f3, idProduct = 00ff

  kernel: [281434.920672] usb 2 - 1.7: new USB device strings: Mfr = 1, product = 2, SerialNumber = 0

  kernel: [281434.920675] usb 2 - 1.7: product: pedal WITH USB

  kernel: [281434.920678] usb 2 - 1.7: manufacturer: VEC

  kernel: [281434.923852] entry: CVE CVE USB pedals as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input38

  kernel: [281434.924239] is hid-generic 0003:05F3:00FF.0016: entry, hiddev0, hidraw3: USB HID device v1.00 [CVE CVE USB pedals] on usb-0000:00:1d.0-1.7/input0

  PSG-probe: check the bus 2, device 28: ' / sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7 '.

  PSG-probe: bus: 2, device: 28 is not a MTP device

  And when I click on "OK" to the dialog, he said:

  kernel: [281480.324926] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  kernel: [281480.900448] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  When I unplug the device, it is said:

  kernel: [281517.582472] usb 2 - 1.7: unplug USB, the device number 28

  Thanks for the ideas on solving this problem.

  Answering my own question: I spoke with a salesman who told this pedal does not work on virtual machines for the following reason:

  These pedals are all just Universal USB controllers that require programs or applications to be able to see and recognize them for use. Because they are installed by the base of Windows and Generic USB devices drivers, they can not be seen my remote computers via USB sharing etc.

  They recommended using a hotkey program to work around the problem. I have not tried this solution, but bought a different pedal that works out of the box with VM: a vP-1 vPedal. Lower build quality than infinity (in my opinion) but it works perfectly.

  This is the idea of the key of the seller:

  I have a solution that will allow you to use the pedal as expected if the remote program who need to use supports the use of shortcut keys. For example, these pedals are commonly used with NCH Software Express Scribe professional software. This software can use either a pedal, or you can assign the playback functions to access keys. In the scenario you are talking you re Express Scribe on the remote computer to use keyboard shortcuts, you then install Pedalware (http://www.altoedge.com/pedalware/index.html), a free Windows only the foot pedal utility made by NCH Software, you then use the Pedalware utility to assign the buttons on the pedal of a keyboard shortcut that coincides with those remote program.

• Windows 7 64 bit host works very slowly after discontinuation of VMWare Workstation

  I am running 64 bit Windows 7 on a Dell laptop with an i7, 6 GB ram and VMWare Workstation 9 processor. Everything works well on the host and the VM, while the virtual machine is powered on but after the suspension of the virtual machine and station work out of the system host becomes very slow and applications become desensitized. This lasts for several minutes after the stoppage of work. In general, I have executed only a VM at a time, but even when I got a couple of them run both the host system and they are very sensitive. I started the task with great difficulty Manager when this occurs to see if I can see problems with the free time of processors and memory use, and everything seems fine. So far all my research turned discussions about this kind of problem during execution of the virtual machine so I am at a loss to know even where to go next to make this diagnosis.

  Kind regards

  Bruce Brandt

  This is because windows is the collection of memory the vmware used in the system and marking of these blocks of memory piece by piece as 'free '. If you shutted down of the virtual machine (not paused) then the memory can be returned to the system immediately. I guess if it was caused by the Intel RST driver because I noticed about there is also no question AMD computer used by my colleague.

  You can wait until the stops of HDD-light, keeping the stats of light, constant in the meantime try avoid to activate any application of consumption-e/s disk / operations.

• VMWare workstation + Hyper-V (Windows 8)?

  I know that in the past I tried to combine hyper-v on a machine and vmware workstation that has not worked. I don't understand why because both probably need exclusive access for virtualization by the processor hardware. This use case will still work? I didn't know if this is a hardware or software limitation. Perhaps more recent processors allow multiple layers of virtualization access pieces of virtualization? The reason I ask is I would like to install hyper-v on my machines of windows 8, but hyper-v has limits that vmware fillings of workstation (namely that support usb) so I wonder if it will ever be possible (or maybe that's now because I tried really long ago) or do you think it will always be a limitation?

  BTW: The current processor, I'm declining to do so is a bridge of Ivy (i7-3770).

  Thank you...

  On a deck of Ivy, you can run Workstation as a comments under Hyper-V hypervisor, but you will be limited to 32-bit guest nested under my computer, because Hyper-V virtualizes not features of virtualization assisted by the physical processor hardware.  See nested running VMs.

• Windows7 + VMware workstation installation of ubuntu

  at the beginning sorry for my weak English level: P

  I had a problem

  I installed on my computer laptop windows 7 and vmware workstation 7 and I want to install ubuntu 9.04, but is not start the linux iso file, I had, iso file is good, I guess it's sort of a simple problem, I installed windows Server 2008 without any problem on vmware workstation but ubuntu doesn't even start...

  http://img31.imageshack.us/i/55688166.jpg/

  http://img199.imageshack.us/i/39370867.jpg/

  http://img683.imageshack.us/i/60346614.jpg/

  I thought there may be a problem with NIC so here, I try to boot after the removal of this

  http://img707.imageshack.us/i/80746708.jpg/

  http://img156.imageshack.us/i/47216333.jpg/

  my windows 7 has been installed juice, I have no problem with the hardware on the laptop

  > at first sorry for my weak English level: P

  Seems OK to me

  1 you have the CDROM 'reader' (your iso file) to connect to turn on? (Settings/CD/DVD of the VM)

  2 did you hit escape when BIOS starts and then tell it to boot from the CD?

  3. all entries in log file of your VM machine?

  A CD created from the file iso bootable in your machine?

  Lou