Giving Apple TV away

Similar Questions

• What should you do before giving old iPad away?

  I want to give my Mini iPad for a person living in the United Kingdom. What I do do red to abandon my property and the liaison with my iPad?

  See this support document. What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• iCloud asking closed Apple ID password

  My iPhone with IOS 10.0.2 5s constantly requires the password of my iCloud account that no longer exists. When I enter the password comes with "account does not exist" or "account is blocked for security reasons" and asked to verify the account that leads to the password reset and obtaining the same response once the password is reset. I can't erase the iPhone because you need to connect to do, and I tried to temporarily replace your method Apple ID. Also signing off iCloud is not an option because it requires the password to log. Can I do or what I should contact Apple further away?

  Thank you.

  Take a look at this article, it should help you If iCloud asks you the password to your Apple ID - Apple Support previous

• Apple TV freeze while watching the TV program

  I have the 4th generation Apple TV, and after several hours of viewing, the image freezes.  I am currently using only 3 applications (NBC, ABC, CBS) and it freezes on all applications.  I have been informed by Apple Care Support should I close all applications after consulting, but even that is not helping with the gel.  At this point, the only way to unfreeze the device should do a restart by pressing the two buttons below the trackpad on the remote control.   Of course unplug the device also works, but it's too heavy to be repeated several times.  Apple Care suggested that there might be a problem with the hardware with the device and it may need to be replaced.  Does anyone else have this problem?

  Intermittent problems are often the result of interference. Interference can be caused by other networks in the area of or household electric goods.

  You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but won't make iStumbler household items.

  Refer to your router manual to know how to change your wifi channel or adjust your pace of multicast.

  There are other types of problems that can affect the networks, but it is by far the most common, so note the first. We see networks that have inherent problems work differently with different versions of the same software. You can also try to move the Apple TV away from other electrical devices.

  The following article can help you.

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  Sources of interference

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Apple TV 3rd gen: WiFi Internet connection is not stable.

  If I success to connect to WiFi after a few hours cut. After that, it is impossible to reconnect.

  Intermittent problems are often the result of interference. Interference can be caused by other networks in the area of or household electric goods.

  You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but won't make iStumbler household items.

  Refer to your router manual to know how to change your wifi channel or adjust your pace of multicast.

  There are other types of problems that can affect the networks, but it is by far the most common, so note the first. We see networks that have inherent problems work differently with different versions of the same software. You can also try to move the Apple TV away from other electrical devices.

  The following article can help you.

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  Sources of interference

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Apple tv is cutting by listening to the shows and movies

  Why my Apple Tv is cut off when I listen to Netflix

  Intermittent problems are often the result of interference. Interference can be caused by other networks in the area of or household electric goods.

  You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but won't make iStumbler household items.

  Refer to your router manual to know how to change your wifi channel or adjust your pace of multicast.

  There are other types of problems that can affect the networks, but it is by far the most common, so note the first. We see networks that have inherent problems work differently with different versions of the same software. You can also try to move the Apple TV away from other electrical devices.

  The following article can help you.

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  Sources of interference

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• trying to erase macmini, but losing internet

  I need to delete my old MacMini, but the internet is not connected when I

  Turn it back on. My service provider said that it is a product problem?

  Thank you

  Why do you need Internet to erase the hard drive? According to your profile you are running Snow Leopard on your Mini. So, see the following:

  Snow Leopard erase and install

  Remember to only back up your files.

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• problem of re - install

  I have an old imac under Snow leopard, which has begun to go hang (spinning beachball of death) mode. I ran a re - install, but after getting it at the stage of configuration after re - install stills mode hang. Any ideas, anyone please?

  Snow Leopard erase and install

  Remember to only back up your files.

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads select your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• How can I delete and reinstall my Macbook pro at the new factory

  I bought a Macbook pro 13-inch, mid 2010 at a yard sale and I want to do as good as new. I ordered 2 DVD discs for her and have just received. Applications install DVD and Mac os x install DVD. I don't know anything about computers other than how to turn it on. can someone guide me, step by step what to do to clear all personal data previous owners?

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of partitions of one (1) in the menu dropdown. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• Process of return to Snow Leopard of El Capitan

  I have an iMac from the beginning of 2008.  I was using Snow Leopard successfully.  Last weekend, I've upgraded to El Capitan.  During the conversion, I lost all my email history.  I had saved Snow Leopard in Time Machine just before the upgrade.  I want to find a process documented back to Snow Leopard (I have the dicc) and time using Time Machine to reinstall the emails.  I tried to reinstall the e-mails with the help of El Capitan, but it does not work.  Did Snow Leopard work - El Capitan runs very slowly with my chip set.  Any help would be appreciated.

  Here's what you need to do:

  Snow Leopard erase and install

  Remember to only back up your files.

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of partitions of one (1) in the menu dropdown. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• MacBook (13-inch aluminum, Late 2008) cannot install snow leopard

  So I'll try to fix computer for my mother, it's a MacBook (13-inch aluminum, Late 2008).  He was running very slowly so I did a factory of resets and tried to install a copy of snow leopard on it.  When I try to install it on my hard drive it says "Mac OS X does not have this disc."  The symbol for the hard drive has a yellow! sign on it (if it matters).

  (1) my question is what can I do to install the OS on this?

  Mavericks - OS would not install, I tried this right after the factory restore.

  -Unfortunately I can't eject the disc either-

  (2) that it has to do with my drive hard and how can I test that?

  Whence it the Snow Leopard disc? You must use a copy of Snow Leopard retail. You can buy Snow Leopard at the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (US). The price is $ 19.99 plus tax. You will receive a physical media by mail after placing your order.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears, wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of partitions of one (1) in the menu dropdown. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• Restart the external drive loop

  I'm trying to downgrade an old MacBook 13 inch (unibody), it's current run 10.11, but decided it was too system for the small laptop. Swap on the HD for those who had 10.5 and it would just keep restarting. I tried even to remove the HD and reboot only with the 10.2 installation disc and it would always be in the loop. Only time where it works properly is with 10.11 back in HD.

  It's very unusual, because I have no memory of this never happens with other OS.

  You need the original Installer 1 disc that came with the computer or a 10.6.3 retail DVD of Snow Leopard. Then follow these instructions:

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

  You can now switch to any version of Mac OS X that you have already downloaded from the App Store. They must appear on the purchase page of the App Store when you connect using the Apple ID used when downloading of their origin. Your model is the first of its kind to run Lion or later. You can stay with Snow Leopard for best performance. However, the model is quite able to run than el Capitan provided that it has enough memory installed - at least 4 GB.

• After erasing Macintosh HD I can't re install

  Hello Expert,

  Could someone help me please. Recently, I buy an old mac book pro to a provider. I have no any kind of disk or operating system. Due to some problems recently, I deleted macintosh hd to install the new operating system. After finish all this that when I try to install the new os on the internet say ""this article is temporarily unavailable " "

  Now how can I install a fresh new copy please help me someone.

  Details of the MacBook Pro:

  Processor: 2.4 GHz Intel Core 2 Dou

  Memory: 2 GB 667 MHz DDR2 SDRAM

  Graphics card: NVIDIA GeForce 8600 M GT 256 MB

  Serial number: W873067dx92

  Software: OS X 10.8.3 (12D 78)

  First, you must install Snow Leopard 10.6.8 before installing a version of Mac OS X assuming that your computer is compatible with El Capitan or Lion.

  Upgrade to Snow Leopard

  You can buy Snow Leopard at the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (US). The price is $ 19.99 plus tax. You will receive a physical media by mail after placing your order.

  After the installation of Snow Leopard you will need to download and install the Mac OS X 10.6.8 Combo Update v1.1 update Snow Leopard 10.6.8 and give you access to the App Store. Access to the App Store lets you download Mavericks if your computer meets the requirements.

  General requirements for Snow Leopard

  1. equipped mac to an Intel processor

  2. the 1 GB memory

  3. 5 GB of available disk space

  4. DVD drive for installation

  5. some features require a compatible Internet service provider;

  charges may apply.

  6. some features require Apple iCloud services; fees and

  conditions apply.

  Upgrade to El Capitan

  You can pass the Lion El Capitan or directly from Snow Leopard. El Capitan can be downloaded for FREE from the Mac App Store.

  To upgrade to El Capitan, you must have Snow Leopard 10.6.8 or installed Lion. Download El Capitan from the App Store. Sign in with your Apple ID. El Capitan is free. The file is big enough, more than 5 GB, allow it some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

  Mac that can be upgraded to OS X El Capitan

  1 iMac (mid-2007 or newer) - model identifier 7.1 or later

  2 MacBook (late 2008 or early 2009 or newer aluminium) - model identifier 5.1 or later

  3. MacBook Pro (Mid/Late 2007 or newer)- model identifier 3.1 or later version

  4 MacBook Air (late 2008 or newer)- model identifier 2.1 or later

  5 mac mini (early 2009 or newer)- model identifier 3.1 or later version

  6 mac Pro (Early 2008 or newer)- model identifier 3.1 or later version

  7 Xserve (early 2009) - model identifier 3.1 or later version

  To find the identifier of the model open system information in the Utilities folder. It is displayed in the Panel on the right.

  Are my applications?

  See table of application - RoaringApps compatibility

  Upgrade to Lion

  If your computer does not meet the requirements to install the Mavericks, it can still meet the specifications to install Lion.

  You can buy Lion to the Apple store. The cost is $19.99 (as it was before) plus taxes.  It's a download. You will receive an email with a redemption code that you then use on the Mac App Store for download Lion. Save a copy of this installer to your download folder because Setup deletes itself at the end of the installation.

  Lion system requirements

  1 mac with an Intel Core 2 Duo, Core i3, Core i5, Core i7,

  or Xeon processor

  2. 2 GB of memory

  3 OS X 10.6.6 or later (10.6.8) recommended

  4. 7 GB of available space

  5. certain features require an Apple ID; conditions apply.

  Snow Leopard erase and install

  Remember to only back up your files.

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of partitions of one (1) in the menu dropdown. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

  [Permission to use any part of the foregoing has been granted by khati, exclusively, to theratter.]

• Cannot restore from a backup

  I cannot restore from a backup and don't know why.

  I have a Crucial SSD of BX100 in my mid 2010 MacBook Pro. It is divided into two partitions. I got Snow Leopard on a partition and Yosemite on the other. For some reason any I've never understood the Snow Leopard guarded beachballing partition. This happened if often that I decided to wipe the disk and reinstall from my backup, do it before the beachballing began to occur.

  But I can't restore. I wiped the drive of a Snow Leopard system, repaired and reformatted. The drive is not Core Storage, this is Mac OS extended (journaled). When I try to restore the restore on it works for about two minutes and then stops. Finally, I get a message saying that the disc has been ejected incorrectly.

  I noticed that when I receive information on the drive, an element appears different from other readers and which corresponds to the element, owners enabled: no each other drive I've seen says owners enabled: Yes. Is it all just because there is no system on the partition?

  Also "ignore ownership on this Volume" must be checked or unchecked?

  Suggestions welcomed, I am baffled by this.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• Position of the Menu of applications...

  Is it not possible to locate the VMware Fusion menu bar item - the Applications Menu - to the left (before all other icons) or right (before the Spotlight and Notifications icons), in a future version? It's pretty annoying to be forced to take care of her, submerged at random because it's among other icons.

  Of course, one of the best features of Fusion, but still room for improvement...

  ChipMcK wrote: Placement of the icons/pins on the menu bar is controlled by Apple.

  There is no api for VMware to use today.

  Think that you submit FeedBack to Apple.

  Which maybe was true to a certain nevertheless an app that is properly written can be moved by command-click-drag like the OS X system App icons in the menu bar.  I know because I currently have and have had applications which, while they by default load the left of OS X system App icons like all OS X system Apps icons that are loaded in the order they would normally be ' er being later on the extreme left, however I can use the command-click-drag to change the location.

  So it's possible I'll assume there is an API and I'm going away from assuming that if other software manufacturers can do it then if can VMware with VMware Fusion and no need to submit feedback to Apple (although don't tell don't not giving Apple feedback)!

  BTW the current App I use to organize not OS X Apps system icons in the menu bar via command-click-drag, as the app icons OS X system is bartender.