GlobalEventListener and mute KeyPress

Similar Questions

• Faders and mute are not on some channels

  I have two guitar channels that have stopped responding to the fader and mute controls. The audio is full on, I can't do them down or mute their. As far as I can see they are routed exactly like my other three tracks. Mono, all for one, input stereo outputs. It does not matter related or unrelated. I have no updated automation accidentally powered so it shouldn't be a problem VCA. When I their solo volume and mute work normally. Stoves work very well on the two in any case. I made a Flex rate task with them, but also to the bass and drums. I don't think that should matter, but I will say. Briefly, they were still working for one or two crossings of fast pass, but again, at full volume. It is difficult to start mixing this way.

  OK, it improves. I deleted tracks and channel strips and re - recorded audio of one of the titles of the source to which it was recorded on. It mutes and turns off... but... I can still hear the other guitar tracks. I don't have to see a bass, drum and vocal track. They were a single take, although there are some flex in the field on the voice and some bending on the bass rhythm and determine the alignment to the battery. Especially for the corrections of rhythm, I had done on the guitar tracks.

  How can I find these tracks ghosts? This must be what I hear. Where are they? I bring up all the mixers section Flickr photos and only channels of the preview, then click on appear. Nothing else.

• How to change the screen lock and mute on the parameters?

  Hello, I was wondering how to activate the rotation of the lock and mute my IPhone4s, I looked in the settings of a lot of time for it and I can't seem to find it. It would be so great if someone could help me figure out how. Either way, I have the version before iOS 9.3.1.

  Thank you!

  What do you mean pass settings mute and lock? Are you referring to the similar setting on the iPad? If so, which is not available on the iPhone. The "secret" key is on the side of the phone. To set the Orientation lock, you swipe up on the control center and the icon is the last one on the top row, with the lock in the Center. White is turned on, black is off. Here is the "secret" key.

  

• Volume and Mute keys do not work

  The volume keys and mute on my Pavilion dv5 do not work.  I am able to control the volume and mute video tracks via the visualization of software functions.

  Thank you.  This solves the problem.

• Sound fluctuate constantly, jumps and mute don't work

  original title: noise fluctuates constantly and mute does not work, there is also a quick jump in time.  ???

  Sound fluctuates constantly and the mute won't work, there is also a quick jump sometimes... it is his property. ???

    

  Hello

  1. What is the brand and model of the computer?

  2. when exactly this question produce?

  3. don't you make changes to the computer until the problem occurred?

  4. what operating system is installed on the computer?

  I suggest you try the steps from the link below and check if it helps.

  For Windows 7: Open the Audio playback problems troubleshooting: http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter

  For Windows Vista: Tips for solving common audio problems: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems

  For Windows XP: How to troubleshoot sound problems in Windows XP: http://support.microsoft.com/kb/307918/en-gb

  Hope this information is useful.

• Volume and mute keyboard keys stop working

  P7 - 1298c updated to Windows 8 Pro, everything worked but now the volume keys and mute have stop working. I know that there are related software, because if I boot a backup drive, they work again. The most obvious thing I did lately, it's remove the feature optional windows Hyper-V. Is there an obvious way to reactivate the buttons?

  Another recent change, I've had, I think that Adobe Flash player has updated.

  It seems to have solved the problem with the help of an old thread in the http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Volume-control-keys-on-keyboard-not-working/td-p/773049 area Notebook

  I uninstalled the device IDT under sound, video and game controllers in the Device Manager with option enabled, rebooted and reinstalled driver remove the last available IDT device shown to my system model and win 8 64-bit. Oddly enough, I received a message that the update failed. But the sound and the buttons seem to work fine now.

• My wireless and mute, volume up/down buttons have stopped working together.

  I have a HP Pavilion dv6-2113TX, and all of my upper buttons (mute, volume scroll and wireless area) have stopped working. I fall there are about 3 weeks and not very high, only about 1.5 ft, but I worry that this may have had something to do with my problem. What should I do?

  Hello

  It is always interesting to try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• Lock keyboard of blackBerry Smartphones (has *) and mute (unlock or day before) no longer works

  I used to lock my keyboard by holding down the LOCK button (A *) and unlock by pressing the MUTE. The LOCK button no longer works

  The Blackberry is designed to be reset by removing the battery while the power is on. Leave the battery for a minute or 2.

  See if that solves the problem.

• On the keyboard volume and Mute keys do not work

  I have an Asus K43SD (windows 8). I had downloaded all the drivers, but there is only 1 problem. The laptop works very well except the mute, turning up and turn down the keys on the keyboard. They do not work and I have to use the volume icon to put upwards or downwards. I would really appreciate anyone who has the solution. I've looked everywhere and I'm ready to throw the laptop with the cat! LOL thanks a lot

  Moved from feedback

  Original title: problem

  Contact ASUS support.

• Mute button and mute audio

  Adobe Captivate 9

  I created a button mute and audio mute.  I ran into a small issue where I would like the audio to mute and give the user the choice sound on it.  I can't figure out what I did wrong.  I have the feeling that its super easy but played with this long way.  Any ideas or help would be great!

  You make it really VERY complicated. Have a look at my article:

  1 share = 5 buttons toggle - Captivate blog

  You will see that you need to a variable, the cpCmndMute system variable and you can use an additional State (not to mention that the 3 States integrated) (shape) button to display the State of the button. I use a shared action, because the same action can be used for several buttons to toggle.

• Can I select a portion of a video and mute it?

  I need to cut the part of my video while I can?

  Yes! Tap the video preview of the clip you want to cut to access clip mounting options ("... ("on the iPhone), then press the speaker icon to access the audio options like mute, volume and fade / fade. This blog contains additional information: Sounds Good! Get great audio in Premiere Clip (part 1 of 2) | First Clip: Made with Clip

  You can also use the split Clip to create an L-cut, that allows to mute only a part of the audio without pause in visuals.

  Bronwyn

  Community Manager for first Clip

• The sound on my laptop has suddenly stopped working, no devices are listed in the list of output and the volume bar and mute button are locked on mute

  

  Try turning off your computer and pressing Command + Option + P + R as soon as you restart your computer.

• Volume buttons and Mute not working-T400

  I just do a fresh install of Windows 7 64-bit. Everything works except the physical volume up, down and cut buttons. Any ideas on how to solve this problem?

  Thank you.

  
  

• How to play several audio files at the same time and mute toggle some voices?

  Hi all

  Forgive me if this is mentioned elsewhere and kindly point me in the right direction.  I'm a kid with flash and action script so if you are in doubt, error on the side of more specific in your response, there is a lot of vocabulary I still don't know.

  The goal:

  I have 4 audio files which are Soprano, Alto, tenor and low voice of a musical example.  The result should allow the user to play all 4 voices at once and dumb voice specific to hear all the possible combinations of voices playing together or solo.  I imagined a check box at the beginning of each rated musical line that puts that voice muted when checked.

  It would be ideal to have the game, interrupt and stop reproduction choices where 'Stop' resets playback at the start and 'Pause' maintains the current place in time and takes over from there, once playback is started again.

  I am able to get the simple audio files to play from a single button, but I am struggling to find how to link multiple audio files to start at the same time by a single button.  I found this link: https://forums.adobe.com/thread/1069107?start=0 & tstart = 0

  where the last message mentions the use of tables, but being a complete beginner, I don't completely understand what they are doing.

  I know it's a big piece of questions at once, but if you could meet any part of it, or direct me to a tutorial/instructions, I would really appreciate it.

  Thank you for taking the time to help others

  use:

  kglad wrote:

  use:

  import flash.events.MouseEvent;

  import flash.media.SoundTransform;

  var soprano: Sound = new Soprano();

  Var high: Sound = new Alto();

  var tenor: Sound = new Tenor();

  var bass: Sound = new Bass();

  Ash var: Array = [soprano, alto, tenor, low];

  var offsetA:Array =]

  var st: SoundTransform = new SoundTransform();

  play_btn.addEventListener (MouseEvent.CLICK, playF);

  pause_btn.addEventListener (MouseEvent.CLICK, pauseF);

  stop_btn.addEventListener (MouseEvent.CLICK, stopF);

  playF function (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = [i] Sunda () .play;

  }

  }

  function pauseF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = this ["sc_" + i] .position;

  This ["sc_" + i]. Stop();

  }

  }

  function stopF (e: MouseEvent): void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  offsetA [i] = 0;

  This ["sc_" + i]. Stop();

  }

  }

  function unpauseF(e:MouseEvent):void {}

  for (var i: int = 0; i)< sounda.length;="" i++)="">

  This ["sc_" + i] = Sunda [i] .play (offsetA [i]);

  }

  }

  function muteF(i:int):void {}

  St.volume = 0;

  This ["sc_" + i] .soundTransform = m;

  }

  function unmuteF(i:int):void {}

  St.volume = 1;

  This ["sc_" + i] .soundTransform = m;

  }

• does not not keys mute and mute

  var myGlobalSound:Sound = new Sound();
  myGlobalSound.start(0, 99);
  playB.visible=true;
  stopB.visible=false;
  
  
  volControl_mc.dragger_mc._y = 0;
  volControl_mc.dragger_mc.onEnterFrame = function() {
          myGlobalSound.setVolume(0-this._x);
  };
  volControl_mc.dragger_mc.onPress = function() {
          startDrag(this, false, 0, this._y, 41, this._y);
  };
  volControl_mc.dragger_mc.onRelease = volControl_mc.dragger_mc.onReleaseOutside=function () 
  {
          stopDrag();
  };
  stopB.onRelease = function() {
         myGlobalSound.stop();
          playB.visible=true;
          stopB.visible=false;
  };
  playB.onRelease = function() {
          myGlobalSound.start(0, 99);
          playB.visible=false;
          stopB.visible=true;
  

  But does not disable and reactivate the buttons.  ??????

  I'm moving to as3 kglad...