Computer starting out of position problems.

Similar Questions

• given the date and time not set when computer starts. also have a problem with typing

  by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

  on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

  You may have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer starts with "Setup is preparing your computer for first use" every time.

  I've run msoobe.exe and Setup.exe in C:/Windows/System32/oobe, in Windows 7 Ultimate and now whenever the computer starts up and displays the logo of Windows 7, I get "Setup prepares your computer for first use.  After that get the Windows Welcome screen, it works very well.

  Hello

  Let us try both methods and check if it helps to resolve the issue.

  Method 1.
  Perform a startup repair, check to see if it helps.
  Follow the articles for h ELP on startuo repair.
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2.
  You will need to perform a clean boot to find the service which is the cause and then disable or remove.
  Here are the steps to do:
   
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.

  Once you've found the conflicting service, stop it. Start the computer and stop it.
   
  Stop this service now.
  a. open the control panel in the Start Menu.
  b. Select administrative tools in the control panel.
  c. open the Services in the Administrative Tools window.
  d. Select the service and then click on stop in the left column of the main window of the Services window.

  Reset the computer to start as usual

  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I've upgraded to windows 7. Whenever the computer starts, a window pops up saying: windows Upgrade Advisor 7. I've searched for the file and can't find it. Any idesa someone?

  Cannot get rid of this window. Help

  • Click Start
  • Type: MSCONFIG.
  • Press enter on your keyboard
  • On the general tab, click Selective startup.
  • Under Selective startup, clear the check box load startup items.
  • Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  • Click OK.
  • When you are prompted, click on restart.
  • After the computer starts, check if the problem is resolved.

• I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon.

  I have a laptop Asus N53Jq, 16 GB, 224 GB ssd, I get an error message when the computer starts, "failed to prepare the critical file! Engine out of Chameleon"when I click the computer works fine, but it seems that she was taking more resources without doing me anything. Do know how to solve this problem.

  Original title: Chameleon engine

  I uninstalled ASUS Splendid Video Enhancement Technology to my computer and it solved the problem!

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• Computer starts: problems

  I recently had a lot of trouble to make my computer with Vista at startup, it would work sometimes, other times re-launch at startup. I thought that this could be a windows problem, so I tried to re - install windows when I finally got to do the start, he did the process from the beginning until he wanted to re-start, he would have still not finished, so I opened my computer, grabbed with the RAM and BOOM, it worked fine, installation was always pointing however. I was given an option every time when I turned it to either go into Configuration or vista. I turned and walked away earlier and he went to the installation, when I came back he expanded windows for installation files, I said to myself, there is no reason to spend with it when my computer is running, so I cancelled it and now it won't start windows or let me install windows.

  Hello
   
  Follow these steps and check if your computer starts very well.
   
  Step 1:
   
  Remove all external devices and check if that helps.
   
  Restart your computer and press f8 and see it it gives revert the installation program.
   
  Step 3:
  If it does not have a configuration of the previous version, you may need to perform a custom installation.
  Reference:
  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I downloaded the file to click and install creative cloud, but when I run the program my computer starts to "blink". I get an error message, but it never starts to install it either. What is the problem and can I fix it?

  When I click on the icon to start the whole process, my computer starts to blink, but I get an error message. It does not begin to install creative cloud either. Any advice? This happened to someone else?

  
  

  Tyler, please try to remove remove creative cloud app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html & creative cloud install app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

  We would like to also know what version of OS are you using?

• Help! Has made the Creative Cloud 2015 update and it started as a trial version? Monthly payment has been subscribed, why he started out as a trial subscription? I turned off my computer and turned on, and the creative cloud everything has been deleted! I

  Help! The creative cloud from 2015 to day and it started as a trial version? My monthly payment was agreed, why he started out as a trial version? When I turned off my Mac and it went across Creative cloud was gone! Please help me as I have a business to run and I do NOT see support for this phone!

  Hello Jane,.

  I checked your ID Adobe given on the forums, I am unable to find any subscription purchased on this e-mail.

  Is there another email associated with your purchase?

  Please follow the steps in the link using your Adobe Id, which you bought the subscription:

  Connect and disconnect activate Cloud Creative applications

  Please let us know if there is no more need help.

  Concerning

  Bianka Attre

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• My computer started to send copies of all email sent again and again... as 26 copies for 1 person, please please someone can help me?

  Need help

  Can someone help me I am not very computer... my computer started sending multiple copies of any email sent again and again... like 26 copies for 1 person, please please someone can help me
  You did not mention the e-mail program you use. If it's Outlook Express, you have corruption of dbx files.
   
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• Computer locked out, says incorrect password, has not changed the password.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: computer locked out, says incorrect password, haven't changed the password.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  These things don't happen by themselves. Once you're in the system, do a thorough analysis of the malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Mosue does not work after the computer starts

  OP: THE MOUSE CLICKING ON ITSELF AND THEN NOT WORK AT ALL AFTER MY COMPUTER STARTS. WHAT IS THE PROBLEM WITH MY COMPUTER?

  When I start my computer my mouse works fine for a minute or two, and then it starts clicking by himself out of control. I see the icon at the bottom of my computer screen touchpad flashes when it clicks and then after that it snaps really crazy for a few minutes, he clicks on the bottom and it wont let me click all. Its the equivalent of one person pushing the left clicker where I can't do something... someone help me please! BTW, I have a dell vostro, which is only a little more than a year that has windows vista if that helps at all.

  Hi fireflyz19,

  Thank you for your message.

  I suggest you go to the manufacturer's Web site to download the drivers.

  Here is an article that gives more detail how, see the section "manually update drivers":

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer starts and restarts in an infinite loop at startup.

  Received this e-mail from Comcast around 2 April 2013 stating my computer may have a 'bot '. This function constant guard of Comcast. On 5 April, my computer started this start and restart * in an infinite loop. I took the computer manufacturer and all wiped out settings. Comcast removed free Norton antivirus and replaced by Webroot. When the infinite loop finally stops, I just leave the computer on and log off because if I stop, it will begin to restart in an endless loop. I used MicroSoft's analysis and Webroot finds no Malware since I restored it to the constructor parameter. I don't understand??? It does only as long as my wireless light on my laptop. If I boot my computer and disable immediately any connection to the internet, there are no endless loop. I get the desktop to the top and turn on the wireless on my laptop and the computer begins to restart. My daughter uses her Tablet without any problem the same modem wireless. I always get this duplication of constant guard of Comcast email. I sent email them back and ask them if they are sent, and if it was a fake, and their response was like they didn't know what I was asking. Knuckleheads! I am lucky to be online now. He ran into an infinite loop, start and restart hours today. Help!

  Hi Michell,

  1. don't you make changes to the computer before the show?
  2. What do you mean by "I have always received this e-mail from duplication of constant guard of Comcast?

  Method 1: I suggest to disable automatic reboot and then check if the problem persists.

  (Including safe mode) advanced startup options (disable automatic reboot system error)

  http://Windows.Microsoft.com/en-in/Windows7/advanced-startup-options-including-safe-mode

  Method 2: I would say too you will observer event logs to check what is causing the problem.

  Open event viewer
  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? http://Windows.Microsoft.com/en-in/Windows7/what-information-appears-in-event-logs-event-viewer

  Post us the results once you try the steps above.