Mute button and mute audio

Similar Questions

• [X 200] MUTE button and bluetooth does not not after installing Windows 8

  Recently did an upgrade on Windows 7 site to 8.1 and have pretty much everything works except the button mute and Manager connections (and thus bluetooth). I tried to install the latest driver button support page for Windows 8 X 200, and while I saw him appear in Device Manager after you restart, it made no difference. Also, the noise stopped working during this time. I uninstalled driver buttons and brings the sound back, but I still want to get buttons will still once (and the connection manager).

  Any ideas?

  Thank you.

  After much experimentation, I solved the problem. The problem is caused by the integration function Hotkey not installing pack is not right. The most recent version on the assistance of the X 200 (version 3.89.0100) page is over (at least for Windows 8). When you try to install it, it will not yet to present the possibility of installing the highest importance "pilot interface system. To resolve this problem, there are a few things. First of all, I uninstalled what I call the "ThinkPad features Trio"-this is the Hotkey integration pack, power management driver and the driver of tablet buttons.

  After uninstalling and rebooting the computer, we can start fresh. To get things working properly, I installed the old Hotkey integration Pack (version 3.52, us.driverscollection.com, look for links to download fake of course), rebooted, installed the driver of power, restarted and finally installed the previous version of the Tablet driver management buttons I used with Windows 7 before, followed by a final reboot.

  This combination gets all the buttons (mute, Fn + F5, the buttons of the tablet) and features OSD works 100%. The only negative side effect is that Windows 8 has its own bar of volume on the screen when you change the volume with the buttons, so you will see both the bar and the Lenovo one native. It seems a bit funny, but they overlap or anything like that, so I'm fine with it.

• Buttons HP Pavilion DV3 Volume, Mute button and button Wireless does not.

  My HP volume buttons not working do not. Reinstall Manager quick launch buttons, but still does not.

  Any idea.

  Hello

  Please perform a hard reset:
  1 disconnect all devices and remove all USB devices and multimedia cards.
  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.
  3 reconnect the power adapter (do not connect the battery), press the power button and check the results.

• Any way to mute audio while (RAM) Preview frames are rendered?

  I scoured the boards to do this and I can't seem to find an answer. My system is working well, but since the new preview function, (formerly 'Preview RAM') has been implemented whenever I give an overview of the system "beeps" audio, image by image, such that it makes. It's as if she strives to re-read everything to 1 or 2 images per second, including audio. It is extremely annoying when you have made a long enough with audio necessary for reading, especially with a customer in the room, trying to make a phone call while the system leaves escape 'PPE.... " EPP... EPP... PPE' a few minutes wile the timeline bar is becoming green.

  Of course, you can manually cut the machine while rendering that is happening, but is possible to return to the fashion preview RAM worked? In other words, to cache all frames before trying audio playback?

  My apologies if I missed this in the preference settings or boards.

  S.

  Hello Stephen,

  What is the version of After Effects that you use?

  If you are CC 2015 go to After Effects > Preferences > Previews and check the option that says "Mute Audio at the premiere is not real-time.

  Vinay

• computer laptop Lenovo, but a red cross that pop up on the volume button and it s saying no audio device is intall

  I have a computer laptop lenovo, but a red cross that pop up on the volume button and it, s say no audio device is intall

  I want to know how can I solve this problem

  The following link might be worth a visit:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  (Win XP / Vista / 7)

• Red track mute audio?

  Hello.

  I worked on this project, last night and audio worked perfectly. Today, I opened the project and discovered that all audio subclips are red and no audio no read the subclips:

  

  I tried right click everywhere but I can't find a way to put audio on these clips.

  Also, if I add a new video-audio clip to the sequence, the audio's that I had already added to those who will not play. Would not only be a problem if I didn't like these small clips 40

  I'm a noobie Premiere Pro, so I don't know what I got wrong and how to fix it.

  Help, please

  the same has me question today, spent an hour on the phone with the agent of TS.

  It seems that the problem is to copy and paste items from one project to another (copying the data in order, switched projects, copied these sequence data in the most recent project). All was well until after a backup, then the file was salmon-red and the audio file in the Source Panel looked like a short beautiful clay tennis court.

  TS suggested, and it seemed to work, to import the sequence of the other project rather than copy and paste the files. I did it with the same images then saved/closed several times without any additional problems.

  The original sequence of problem, however, was toast.

  Looks like a bug to me.

  Jay

• Dell xps 13 2015, flat and dull audio quality of the headphone

  Hello!

  Everyone knows that the quality of the sound with headphones is very flat and bad? I have no response in the bass at all. The programe of MAXX 3 does nothing that improves the real audio output. Support told me that everything goes well with my system, only that it is like that. Electronic music is unbearable. There is nothing wrong hardware wise with my headphone jack is just the missing frequencies that drive me crazy.

  Hi Martin.

  Just brought portable 9343 and facing same issue on the new installed Windows 10 Insider Preview. His helmet is low compared to my other devices (laptop HP, Tablet Google Nexus 7). Bass is VERY thin... Looks like a cheap helmet.

  Can't say about the sound in Windows 8.1 (out of the box), because I wasn't listening sound on preinstalled system.

  I spent about 5 hours to solve this problem and found a possible workaround. Try it, maybe it will work for you also.

  1. official audio driver download: URL

  2. extract this file to a folder. Install the drivers, reboot the system. After installation delete extracted folder.

  3. find the "Intel (r) Smart Sound Technology (Intel (r) OSH)" Device Manager system devices.

  

  4. click on 'Update Driver' on the driver tab.

  

  5. click on "Browse my computer for driver software".

  6. in the next screen, click on "Let Me pick from a list of devices on my computer.

  7. click the 'Have disk' button and navigate to the folder extracted in step 2.

  9343_Audio_Driver_X22K2_WN32_7422.118.0_A01\RealtekAudio\RealtekI2SAudio\Fre\Isst

  8 select the file 'IntcADSPDELL.ini '. Click on open, OK.

  9. uncheck the "Show compatible hardware", select 2nd device and install it (click 'YES' on the caveat).

  

  10. after the installation, open the Manager Realtek HD tray and TURN OFF MaxxAudio3.

  

  That's all.

  After this step, I have same sound as on my other devices. Without * MaxxAudio improvements.

  Good luck!

• Disable plug and play audio

  Original title: sandisk
  I plugged a sandisk in 1 of my usb ports and my computer is Beeping at me all day, even with the unit unplugged, and when I went to devixes and printers, he tells me to right click on the device icon and everything I installed my TOUCH screen. so, how do I right click (touch) the icon? AND how can I STOP the beep of thia?

  Hi Marsha,

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like you want to disable plug and play audio.

  I suggest you to read the following steps to disable Plug and Play audio.

  a. right on the icon of the computer located on your desktop or in the Start Menu. Then select Manage from the drop-down list.

  b. in the computer management window, go to "system-> Device Manager tools.

  c. on the view menu, select 'show hidden devices '.

  d. expand the list of devices under "-pilot no Plug and Play", and then select beep.

  e. right click on the element to beep, and then select Properties.

  f. in the 'Beep properties' window, go to the driver tab.

  g. in the startup section, scroll the list Type, select Disable and click the OK button.

  Touch screen refer to the following Microsoft article:

  http://Windows.Microsoft.com/en-us/Windows7/using-touch-gestures

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Workstation 8.0.6 and Win10x64: audio crackles - timing problem?

  I use WS 8.0.6 under Win7x64 on Clevo laptop P170EM (3610QM CPU, 16 GB of RAM).

  XP, Vista (32/64), Win7 (32/64), Win8x64, Win8.1x64 invited works extremely well, no problem at all.

  In all the Win10x64 invited (from 10586 last pre-release), the audio is very choppy, with or without VMware Tools installed.

  Tested with the internal ' Test' button and popular players (WinAMP, Foobar2000) using MS, SD and WASAPI interface. Even with 2000 ms buffering, there is no clear sound. In all previous versions of Windows (up to 8.1), 200-300 ms of buffering is enough.

  DPCLat shows 1200.15000 we 1100.1200 average latency.

  I'm afraid that there are some problems of timing of comments.

  What timing technique had been changed to relatively Win10 to Win8.1?

  WS 8.0.6 can be adjusted to fix, or should I update my WS to a version more recent?

  Would be - for upgrade, choose which version of WS? Here, I've seen a few complaints for WS 10 and 12 WS audio stability-related.

  I discovered that Virtual 8 HPET Hardware is enabled by default:

  hpet0. Present = 'TRUE '.

  Disabling HPET eliminates audio crackles and timing problems in win 8.x and 10:

  hpet0. Present = false

  (or you can just comment this line on ' # ').

  Most likely, Workstation 8 virtualizes not correctly HPET.

• Problems with the UI Flash CC. Mainly, I can't click on some buttons and textboxes on different modal windows. (for example. Scale and rotate the sound properties.

  Hello

  I was wondering if anyone else has problems of this kind. I basically only to find a bunch of different buttons, fields and the tabs do not respond to my clicks. This seems to be spread throughout the application.

  I had to work around most of this by using the tab and arrow keys to navigate around the modal buttons and fields... but it's a bit of a pain.

  There are certain parts of the interface that are not accessible via the tabs and the arrow keys... for example tab ActionScript in the Sounds Properties window... There is no way to do that... and by clicking on the tab itself does nothing, although I can see that the rollover of the tab State is enabled.

  I ended up having to run Flash CS6 in order to define the classes of the export of audio files, and it's a major pain.

  Interface issues similar user exist with other things... for example, the color picker (eyedropper) seems to choose colors near, but not directly under him.

  I'll be honest... I'm running on Windows 7... Via boot camp on a Mac Book Pro with the retina display... so questions could come from this combination. However... Flash CS6 has these questions... so I can only think that it is a matter of Flash CC.

  I appreciate any input you can provide. (Although the obvious 'it on OSX rather run' or "just use CS6" are not the kind of responses I'm looking for.) I have my reasons for installation. )

  Thank you.

  Cheerfully,.

  -JR

  Mohan thanks!

  Scaling text to 100% actually works!

  After that I changed the scale to 125%, it still works (which was not planned)

• How can I map a keyboard shortcut for the reacord button in the Audio Mixer Panel?

  I was recording voiceovers in first Pro CS5 for awhile, but I would like to improve my workflow. Whenever I record take, I first press the record button (labeled B below) with the mouse and press SPACEBAR on the game with the shortcut key button. After I record audio, I hit Stop and this activates / deactivates the record off the power button at the same time. I have to then click the record button with the mouse to start the process again.

  Is it possible to map a keyboard shortcut for the record button in the audio panel so that I don't have to touch the mouse during recording of voice?

  

  There is not currently a shortcut for this. This is a good feature request, if. You can submit requests for features here.

• Is there a way to extract and export audio in Captivate?

  I created a Captivate project audio narration, but I want to edit the audio in a separate application and import audio updated back into the project. Is this possible? I already tried the obvious - copy and paste. It does not work.

  Hi benhenny

  Absolutely, it can be done. And it really is very easy!

  Click on Audio > audio advanced... and you should see the advanced audio management dialog box. From there, in the lower left corner, click on the checkbox labeled "Show object level audio. Now select the desired video and click on the export button in the lower part of the dialog box. Then, you simply choose where you want to Captivate to put the files. You should end up with two files. The one in. WAV format and the second. Mp3 format.

  See you soon... Rick

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this.

  My portfolio is currently configured to allow access when locked. I used to be able to double-click the home button and seems my card and I would enter my access code. I have updated to IOS 10 and I am no longer able to do this. All the settings are there. I have an IPhone 6.

  Are? you double click in front of the screen of the iPhone are? (pending). This is what seems to work for me.

  I hope this can help.

• How can I make YouTube playback buttons and other plug-ins more great because they are so tiny?

  How can I make YouTube playback buttons and other plug-ins more great because they are so tiny in Firefox? I tried some suggestions dealing with entering "subject: config ' in a fresh browser, but does not. I also downloaded the add-on called "Theme font & size changer", but that no longer works. So I'm reaching here that it was a suggestion that offered another user here.

  Ah, Yes, that's - a ultra high resolution (dots per inch) display. It is a known problem in Flash Player, which Adobe is working on fixing.

  In the meantime, you can get some videos to have normal size controls from the Youtube HTML5 video player:
  In Firefox, go to https://www.youtube.com/html5 and click on the button "request the HTML5 player.

• iPhone5s, about 3 years. My phone was in place. Whole phone freezes up and I have reset ("home" button and lock button)

  I have an iPhone5s for about 3 years now. My phone has been in place for some time now. My phone just hangs and I have to reset ("home" button and lock button) and when I unlock it after ALL my messages have disappeared or erasing their own messages and I get not notified when someone texts me. Help?

  Reset.

  Restoration.

  Restore as new.

  Standard troubleshooting steps. Have you tried one of them?