Glossy eyes [was: Overlay]

Similar Questions

• I just signed up with MZ SPRT. How can I change my password on MZ SPRT?

  I wanted to use the help of Mozilla's Support. I'm looking for more information about the synchronization. I decided that I would register with Mozilla Support so I've finished recording, went to my email account and clicked on Mozilla Support in the email I was sent. So far so good. Then I disconnected and went about other tasks. Shortly after, I came to the Support of Mozilla, but I can't sign into my account, I thought that my password is wrong. I went back to the registration email and got this way. I thought well, I'll just go into the settings of my profile and change my password. There is no place to change my password. Argh!

  I guess it will be an interesting learning process if I can't even help. Kind of did feel a bit dumb.

  Someone help me please!

  Thank you
  Kenn Dillon

  Open your eyes, Kenn. Do you see this block who says 'Change Password'? If you're smart enough to check the box, he will guide you in the process. Boy mute talk!
  To all the monitors control responses. Don't be concerned, I answer my own question, which, if I had opened my eyes, was an unnecessary question. Duh.

  -)

• Why does changing the histogram curve tone in sync with the main histogram?

  When I set things such as shadows, highlights, exhibition, etc., the histogram changes to reflect these adjustments.  However, the right tone curve window below does not reflect these changes and it is confusing to me as to if any subsequent change, I can do through the tone curve will be accurate.

  For example, if I increase exposure, the histogram 'mountain' moves to the right, but I still get the original mountain bite upwards on the left edge of the tone curve, so we don't know how it will interpret any changes I make to the tone curve.

  Thank you

  Jim

  I withdraw the question.

  I don't know if my eyes was wrong, but once I put the mouse in the tone curve, it actually puts up-to-date, but not instantly in unison with the principal, who threw me.

• Is it possible to get the layer, layerset and layer with status layerset...!

  Hello world!

  Is it possible to get the layer, layerset and layer with the status layerset. Because I met a big problem out of it.

  I have a single PS document which is contain the collection of layer, layer with layer games collection. I need apply the function for each layer and layers and each layer games with of layerset.

  I also tried a code, but its error getting. Please help me out of this code...

  -yajiv

  #target photoshop

  app.bringToFront ();

  level of $= 2;

  var app.activeDocument = docRef;

  Journal of the var ="";

  var x = 0;

  var n = number (docRef.layers.length) - 1;

  for (i = 0; i < n; i ++) {}

  var tm = String (docRef.layers [i]);

  var isLayer = tm.lastIndexOf ("ArtLayer");

  var isLayerSet = tm.lastIndexOf ("LayerSet");

  {if(isLayer!=-1)}

  Check_LayerStructure (DocRef.Layers [i], 'Layer');

  }

  {if(isLayerSet!=-1)}

  Check_LayerStructure (DocRef.layerSets, "LayerSets");

  x = x + 1;

  }

  }

  function Check_LayerStructure (objLayer, objflag, x) {------}

  {if(objflag=="Layer")}

  LayetStructure (objLayer, objLayer.name, BlendMode.NORMAL, 100, 100, 0, true, 'Layer');

  }

  else {if(objflag=="LayerSets")

  LayetStructure (objLayer [x] objLayer [x] .name, BlendMode.PASSTHROUGH, 100, 100, 1, true, 'together');

  m = Number (objLayer [x] .layers. Length)

  for (j = 0; j < m; j ++) {}

  var tm = String (objLayer [x] .layers [j]);

  var isLayer = tm.lastIndexOf ("ArtLayer");

  var isLayerSet = tm.lastIndexOf ("LayerSet");

  {if(isLayer!=-1)}

  Check_LayerStructure (objLayer [x]. Layers [j], 'Layer');

  }

  {if(isLayerSet!=-1)}

  Check_LayerStructure (objLayer [x] .layerSets, "LayerSets", x);

  }

  } / / Loop Layerset

  } / / I loop For

  } //Function loop

  function LayetStructure(layerRef,L,bMode,Opt,fillOpt,S,layVisible,Lref) {}

  {if(layerRef.BlendMode!=bMode)}

  If (confirm (L + Lref + "belend mode was bad...!)) \n"+"do you want to change...? »)) {

  layerRef.blendMode = bMode;

  Journal = Journal + "-" + L + Lref + "belend mode has been changed...! \n\n ";

  e = 1;

  }

  }

  {if(layerRef.Opacity!=opt)}

  If (confirm (L + Lref + ' opacity has been "+ Math.round (layerRef.opacity) +"%...! ")) \n"+"do you want to change...? »)) {

  layerRef.opacity = Opt;

  Journal = Journal + "-" + L + Lref + ' opacity was changed to 100...! \n\n ";

  e = 1;

  }

  }

  If (layerRef.fillOpacity! = fillOpt & & S == 0) {}

  If (confirm (L + Lref + ' Fill has been "+ Math.round (layerRef.fillOpacity) +"%...! ")) \n"+"do you want to change...? »)) {

  layerRef.fillOpacity = fillOpt;

  Journal = Journal + "-" + L + Lref + ' fill has been changed to 100...! \n\n ";

  e = 1;

  }

  }

  {if(layerRef.visible!=layVisible)}

  If (L + Lref + ' left eye...! ") \n"+"do you want to change...? ») {

  layerRef.visible = layVisible;

  Journal = Journal + "-" + L + Lref + ' eye was turn on...! \n\n ";

  e = 1;

  }

  }

  }

  Code of responsible for the action would naturally faster, but if you should be more comfortable with the DOM code, it could be useful to you.

  #target photoshop

  var theLayers = collectLayers (app.activeDocument, []);

  Alert (theLayers.join ("\n"));

  function to collect all the layers.

  function collectLayers (theParent, allLayers) {}

  If (! allLayers) {var allLayers = new Array}

  else {};

  the number of var theParent.layers.length = - 1;

  for (var m = number; m > = 0; m-) {}

  var theLayer = theParent.layers [m];

  apply the function of games of layers;

  If (theLayer.typename == "ArtLayer") {}

  allLayers.push ([theLayer, theLayer.blendMode, theLayer.opacity, theLayer.fillOpacity])

  }

  else {}

  allLayers = (collectLayers (theLayer, allLayers))

  This line includes layer groups;

  allLayers.push ([theLayer, theLayer.blendMode, theLayer.opacity, theLayer.fillOpacity]);

  }

  };

  return allLayers

  };

• How to take the photo and prepare it in photoshop to bring it to the animation of the character?

  Hello

  I want to take a picture of a Denis and do animation

  How to prepare the image that it will work well in the new CHARACTER ANIMATION software?

  Thank you!

  Pictures tend to look scary when driven by HP, because of the "uncanny valley" effect But if you're brave, here's the general idea:

  (1) open the photo in photoshop, put on another layer

  (2) select the right eye, cut it into a new layer, name it + right eye

  (3) turn the eyeball to this new layer that you can see the underlying face

  (3) command-clicking the icon of the right eye to make the selection of the shape of the eye

  (4) select the face layer and shift + delete to remove the eye, choosing Content-Aware Fill to get skin to fill in where the eye was

  Repeat for each part of the body you want individual control on (see the puppet of model by file > new puppet in Photoshop for all names special to use for the auto-rigging)

• I received an email a few weeks ago that freezes my eyes express page when I click it. I was unable to delete or move in my Inbox.

  Outlook Express problem

  I received an email a few weeks ago that freezes my eyes express page when I click it.  I was unable to delete or move in my Inbox.  Everything has seemed fine until today, that I'm unable to remove all new emails arriving in my Inbox.

  Which indicates the corruption of the Inbox, as suggested by Bruce.  But it may be that you enjoy other files that are corrupt.  You'd be better by clicking file | Identities and establishing a new identity.  This will give you a base of messages clean and incompetent.   Then you can go to file | Import | Messages and import them from the old identity.

  Steve

• I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone.

  I'm at my wits end, HELP ME! I was typing an email that has been of about 200 words I hit the space bar and grabbed the next word and looked up the eyes and my email everything was gone! This happened to me several times and I can't ever find anywhere. It just disappears. Can someone help me? I want to know why he spends, how I can solve this problem how can I recover my work and where it went! I blame my laptop or windows or the manufacturer?

  I wrote a full description of my problem, but of course it also disappeared. I type 2-300 words and pooofff they disappear I can't explain it better or go on any more because I just it loose once AGAIN all! I tried to explain in more detail a related problem, but of course he gone too so I send this before I lose too.
  original title: email disappears

  The text turns blue, because you mentioned it.  The most plausible explanation to highlight all of the text while typing is due to hit CTRL-A, which is the same as Edit | Select all.  Then when you type a character when this text is highlighted, then highlighted (blue) text is replaced by the character you typed.  Be very careful to not press the CTRL key instead of the SHIFT key when you type a capital letter A or else which will never happen.

  If your cursor jumps around then also scan your system against viruses and malware.

  Steve

• Any way to print user manual iPad that was recently downloaded during the conversation? Have MS with recurring eye problems. Becomes more difficult to read and find things on the screen.

  WWould would like to be able to print iPad Users.Manual. Originally, MS is irregular and fewer problems. Running harder to read on the screen. Impression would be easierto read.

  Hello! The manual is available here:

  http://help.Apple.com/iPad/9/

  You can also read in iBooks on your iPad.

  https://iTunes.Apple.com/us/book/id1035374126

  Unfortunately, I do not know if there is a printable version for iOS 9.

  This one is for iOS 8.4.

  https://manuals.info.Apple.com/manuals/1000/MA1595/en_US/ipad_user_guide.PDF

• I am currently studying and modules are in PDF format. I desperately need to change the background color, as white background cause my eyes to water after a few minutes. I was able to change the background color of a light blue before the l

  Can someone help me please?

  [Left the lounge general Forum, troubled for a specific product - Mod support forum]

  Hi arthurd55302175,

  You can try to change the background color of the document by using the Document color replace.

  Open the required PDF, go to edit menu > accessibility > replace color Documents.

  You can use contrasting colors option to select the required combination of colors provided in the list or you can use "custom color option and select the color needed for the page background and document text."

  Then click OK to save the settings.

  Kind regards

  Meenakshi

• Overlay, Insert, elevator buttons on their monitors do nothing.

  I cut a bunch of videos that I shot and cut out about 10 clips. When

  I got on my 10th of them, trying to superimpose another element at the end of my project, but it says something about the source being longer than my destination clip. I don't know why this happened because I did not put a length of end. I know that it was not as long as he could go because I had a piece of locked music ina nd it goes much longer. Anyway, some options came to make the clip go faster, etc. I think that I supported on ignore one point. Anyway, now my overlay, insert, lift, and Watt other is button on the screen do not work. They don't do anything. The only way I can get a video clip on the track is if I click on and drag this icon of the cinema to the track of the timeline.

  Does anyone know what I can do to make these buttons work again? They worked fine then all of a sudden, something went wrong and now they do not work. Thank you.

  Take a look at this image and see if you have something that looks like this. Note: This is of PrPro 2.0, so your exact GUI will be a little different.

  

  Maybe you had the chronology in short, had the ICT in the wrong place and accidentally hit the I button (eye), or O (Oh), for installation in or out of the Points.

  Hunt

• Free Siri eyes not working after iOS 10

  iPhone 6 s 64GB running iOS 10 - Ford Kuga 2016

  I had problems with Siri eyes free of charge since the upgrade to iOS10. Before the upgrade, I could see what Siri was referring to on the screen of the iPhone. For example if I choose a destination for navigation.

  Now when I press the voice button on my steering wheel I can hear Siri speak but the iPhone is still locked and the black screen. Even when I unlock the phone, there is no display of Siri (only the icons normal/splash page is displayed). The only thing that changes is the bar at the top of the phone (time signal etc.) turns to purple.

  This is a new feature of iOS 10 or something is broken?

  I noticed this same problem in my 2016 Toyota Tacoma this week. I can press the button home on my phone and use Siri, but not on my steering wheel talk button. Can't find anything about it on the web.

• I am currently using Firefox version 32.0.3. I have installed "Behind the Overlay" extension. The icon is not displayed in the upper right.

  "Behind the Overlay" icon appear correctly at first, but as the browser updates automatically, this extension is not compatible with the latest version of Firefox? A test, I uninstalled this last version of Firefox and installed the version 31.0.0. It made no difference. The icon was still missing. So far I have not found any information about this anomaly online. Any help will be greatly appreciated. Thank you.

  Thank you very much for your suggestions. Unfortunately they do not solve my problem. I had "Always use Private Browsing Mode" enabled in the Settings Options/life private/history of the browser. This caused the "Behind the Overlay" icon to disappear. I disabled this setting. Now I'm using the default navigation mode and the icon is now visible.

• Cannot add a toolbar button in an extension of overlay

  Hello, I have a problem, add a button to the main toolbar.

  I'm creating an extension of overlay of xul, but for some reason some can't seem to add the button to the toolbar. I am able to install it, but not the button appears.

  What I'm trying to do is create a toolbar button, which opens a pop-up window containing an iframe. I need exactly what the user Felipe Silva illustrated in this example:
  http://StackOverflow.com/questions/18506117/create-Mozilla-extension-to-display-a-popup-and-iframe-in-it

  The only difference is that the iframe should load a html file comes with the extension and not an external source.

  I also want to add the button by default the toolbar, but I need to get the button working first.

  You can download a copy of the extension here:
  https://DL.dropboxusercontent.com/u/9942366/firebomb.xpi

  I know it would be easier if I was using the SDK but button of toolbar requires Firefox 29 which is not stable yet, so I prefer this way to.

  Any help would be greatly appreciated.

  Hello andremm, to issues related to the development of extensions, please use the mozilla addons forum - you will get probably a better response there. Thank you!

  https://forums.Mozilla.org/addons/viewforum.php?f=7

• The images have a ugly, like orange hue of a sort of standby automatic eyes

  I have a new computer with Windows 8 (new store brand) Asus and downloaded the latest version of firefox.
  Almost immediately, I noticed a very recognizable orange shade on most or all images, similar to what it would look like if you voluntarily put on 'eye saver', 'save energy' or 'stream '. All gray seems to dull orange, blue is off-violet; It's a nightmare to watch, and I certainly never asked it to do this.

  At first, I thought it was the computer, but the problem seems to be Firefox itself, because save the images and then view offline, makes them seem quite normal.
  Similarly, using Internet Explorer does not give the same problem at all - they look normal everywhere but Firefox.

  Here is a screenshot comparing Firefox to IE (using the site of my webcomic preferred for example):
  https://DL.dropboxusercontent.com/u/10129013/Misc/etc/orange.PNG

  I rebooted several times (and it helps for a few seconds until the problem occurs again, as if it takes a second to load) and I did the Reset Firefox with no result.
  I uninstalled, I reinstalled, I checked and checked all the options that I can find; I googled until I can't google more and I don't know what else to do.

  Does anyone else have this problem? Is there an obvious solution, I'm missing? I just want to be able to see the images normally and didn't suffer no pictures and updates, and I really do not have to go to Chrome or Safari or similar to do. Please help if you can, thank you very much for taking the time to read this.

  This can also be caused by a problem with the profile for your monitor screen colors or color profiles embedded in images.
  
  You can disable color management to test this.

  You can set the pref gfx.color_management.mode to 0 on the topic: configuration page to disable color management.

  You have to close and restart Firefox for the changes to take effect.

  See:

  • http://KB.mozillazine.org/GFX.color_management.mode

• Error type: Yahoo.widget.overlay is not a constructor. Only get error in Firefox, and started this morning.

  There was an automatic Windows Update this morning. Since then, I get the error message "type: Yahoo.widget.overlay is not a constructor ' when I open certain websites such as ancestry.com. Other sites such as Facebook, do any work. Everything looks garbled when I open the Web site. Other sites seem to be unaffected, although I have not more open. These errors are produced only with Firefox and not IE. IE still works very well.

  A friend just to give me a tip that solved this problem. I went to the Options menu, content and unchecked the box that says "enable Java Script". I have no idea why this worked, but it solved the problem and all the Web sites seem to be working again.