Go to a prompt of commands and typing DIR > LPT1 gives an access is denied error

Similar Questions

• c:\Documents and settings is not accessible. Access is denied

  Even if my user account appears under my being the administrator, it is still not allow me access to my documents and settings files.  It is said to "c:\documents and settings is not accessible. Access is denied. "When I came to my computer, I know I opened at least two accounts, both with full administrator access, and yet the account opens is called"Judy"which is my name and at the same time, I'm sure to set up he asked me who has computer it was, so I wrote my name, but when I connect to my computer the account that opens is called"Judy"that even if I never named an account, it is still the only account he allows me to open. When I go to the command prompt to change user names, the screen goes black, and this same account "Judy" appears towards the top and asks for my password.  Simply, it will not show two accounts that I actually put in place.  I followed the instructions from the answer to someone else who has had a similar problem and he showed how you can determine if the account you are using is a standard or administrative account.  I did what told him to do and he came that Judy was indeed an administrator account. I was also able to show the names of all accounts on this computer and stood in the two accounts I made, of which none were called Judy, so I know that these accounts are in there, somewhere and why they are not listed when I ask to change user accounts is a mystery to me.  I've been going around in circles with this.  Everybody out there familiar with this kind of madness?  Any help is appreciated.

  Documents and Settings is not a real file in Windows 7. It is a junction which is configured to allow existing programs to interface with the Windows 7 folder structure.

  Instead, Windows 7 uses these files:

  C:\Users\*your User Name * \My Documents

  and

  Username C:\Users\*Your * \Appdata

  (appdata is a hidden folder)

  Look in C:\Users to see which accounts exist.

  Also you can access the control panel > user accounts to edit.

• My iphone 6 pirate last year and I got two steps.  The hacker has changed the password and recovery key, and apple won't give me access to my itunes that has more than 2000 songs I paid a healthy price.  Help, please

  How can I access my itunes?  Last year my iphone 6 has been hacked and they took my apple ID all my emails and accounts as well as itunes.  Apple.  After a lot of stress, anger and begging has replaced all 3 of my iPhone.  However they refused to give me access to my itunes back!  which is what I want most.  More than 2000 songs of hard earned money are in my itunes and since I had stage 2 Audit not one * thing I could do.  I had over the phone.  and the pirates had changed the password and got a new recovery key!  I want my music thas it.  I've lost thousands of photos that when, in the cloud and that's life, but I paid a lot of money for these precious tunes I want them!  Can anyone help?

  Just provide evidence that the account is to you they probably asked.

• Change the color of the prompt of commands and the value

  Hello
  
  I have a MessageStyledText point with values on a Page of the OFA.
  
  By default, the color of the prompt and the value of this element are black.
  But I need to change the color to blue.
  
  Quick response is much appreciated.
  
  Thank you
  Works.

  Works,

  To change the CSS from the command prompt, you must make a way around.

  like to create two messageStyled text under Layout & CellLayout line. Now leave as empty guest & set its value.

  Kind regards
  GYAN

• In XP, the C:\Documents and Settings\All Users\Menu Menu access denied error

  Windows is comeing up C:\Documents and Settings\All Users\Menu Menu access is denied

  How can I solve this problem

  Hi Tony,.

  a. is the narrow question in the folder of the Start Menu ?

  b. you are the administrator of the computer?

  Check to see if this article helps you.

  "Access denied" error message when you try to open a folder

• Command prompt flashes on and never time.

  Hi all

  Need help. I get a window 'Command Prompt' flashing on and outside at the same time every hour. I managed to make a screenshot of it and it says the following

  "BITSADMIN version 3.0 [7.5.7601].

  BITS administration utility.

  Copyright 2000 - 2006

  BITSAdmin is obsolete and is not guaranteed to be available in future versions of Windows.

  Administrative Tools for the service Bits are now provided by BIT Powershell cm

  dlets.

  Found a 2 job named "task3".

  Use the task identifier rather than the name of the work".

  No idea what this means, but I'm worried

  You can look through the scheduled tasks and see if everything is there

  Click Start and type in the search box

  Task Scheduler

  Click on the suggestion

  On the left column, expand the library and scroll through the entries.

  Otherwise use the clean boot

  https://support.Microsoft.com/en-us/KB/929135

• How to stop windows 7 command prompt of opening and closing after boot start.

  After I log in, and start early. Windows 7 command prompt quickly opens and closes Ran full scan of viruses/malware/etc. in safe mode with malwarebytes pro/norton360/counterspy/and spybot. All came clean. I would like to solve this problem. Can someone help me? Basic knowledge of computer/software. The computer is the last Gateway NV53.

  Hi ernestwade,

  Follow the steps below:

  Step 1: Boot in safe mode network and check if the problem persists.

  See options (including safe mode) advanced boot for instructions on how to start in safe mode with network.

  Step 2: If the problem does not occur in safe mode, start your system in a State of clean boot (in normal mode) to solve the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• How can I install Command and Conquer: Red Alert (Windows 95) on Windows 7?

  Hello!  I tried to install Command and Conquer on my new computer that is running Windows 7, but it not even will let me install it, much less play.  I insert the disc, click on 'Install Red Alert' and it gives me a progress bar indicating "Preparing Install Wizard" then the page install red alert rises, but a windows message said "this game is intended to be run from Windows 95." Whethee I click the X or 'OK' it just cancel the whole process.

  I searched the database "Help and Support" (from the start menu of windows 7) "Installation old games.  I clikced on the result "make older programs run in this version of windows" from there, I clicked on the link to open the document "program Compatability Troubleshooter."  The program I want to run (red alert) did not appear, so I clicked "unregistered". It prompted me to enter the location of the file, so I typed in the location "" E:\setup95\SETUP. "» EXE"was from there, I clicked on the"Try recommended settings"as my troubleshooting option. He gave me the "Compatibility of the test settings" page, so I clicked on the button "Start the program" (at this point, the default compatibility selection is Windows XP). From there on, a 'user account control' shield appears, so I type my user name and password.  The same thing happens as before: preparing to install the shield, and then cancel it.  So from there I click 'next' on the compatibility of the program window.  He said "Troubleshooting is complete, is solved the problem?  I say, "No test using different settings."  This gives 4 options to select, and one applies, so I will select "the program worked in earlier versions of windows but won't install or run now."  Then it takes me to a list where I can choose windows 95 and one host of others.  I selcet Windows 95 and click Next.  I was excited, but exactly the same thing happened as when I tried with the XP settings applied.  I give myself a user account control screen, I type the name and the password, but the same thing happens.  'Windows 6.1 is running.  It is a single product from windows 95. "And then I have to close it.   Any suggestions?

  Hi xPEZZx,

  What version of Command and Conquer you trying to install?

  Follow the link to the Windows 7 Compatibility Center that provides information on the different versions of the game.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=command%20and%20Conquer%20red%20alert

  You can try to copy the configuration file for the game on your computer and so it works in compatibility mode and check if that helps. Execution of convenience store compatibility is just a workaround solution, if this does not help, you might need go to the new version of the game.

  You can also contact the Publisher of the game and check if they can help you in the installation.

  http://www.EA.com/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to install command and conquer generals .i get error 1603 who says it's a big file, how do I do then it will install

  When I try to install command and conquer generals error 1603 rises said that it's a big audio file what it means and how to fix

  Hello

  1. are you able to install other games and programs on the computer?

  2. do you have security software installed on the computer?

  Method 1:

  Re-register the engine install and try to install the game.

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  ·         MSIExec /Unregister

  ·         MSIExec/regserver

  (c) try to reinstall the game.

  Method 2:

  Make sure that the Windows Installer service is not set to disabled.

  (a) click Start, click run and type services.msc and press Enter to open Services.

  (b) click the Windows Installer service, and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

  (g) try to reinstall the game.

  See the link below and try the steps if you are running Windows XP on the computer, check if it helps.
  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• I can't erase unnecessary files on my Mac Pro by pressing option, command, and then J.  Help, please.  Thank you

  I can't erase useless files more pressing option, command, and then J.  Help, please.  Thank you

  option, command, and then J is not listed as a shortcut KB

  here:

  Keyboard shortcuts in Mac - Apple Support

• 31.1.0 and 31.1.2 drop down menu commands and commands "right button" very slow... what to do?

  My TB version 31.1.0 and 31.1.2 drop-down menu commands and commands "right button" very slow... All other menu programs bars will work perfectly. Tried disabling McAfee, no diff. TB collects e-mails, wrote e-mails to a normal speed without problem. Control S, V, P, etc work but slow... what to do?

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• touch screen works is not to a few areas and typing randomly

  The touchscreen does not work in specific areas of the screen. and also it behaves erratically, opening, closing and switching applications and typing randomly on its own... sometimes the home button also stops working.

  The problem started with "ghost typing" and automatic switching of applications. and recently to the touch in some places on the screen also stopped working...

  I do not have a centered around Apple care, so I thought to get certain points of view on this problem before relying completely on the local repair store guy...

  You have coverage on the iPad that can interfere with the screen?  I've seen other shadow report type and it turns out being the hardware issues, but try some basic troubleshooting steps. Close all applications and the strength to restart the device first.

  Close all applications. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.

  Now restart of strength. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If this difference, try this. Reset all the settings. You won't lose any data, but all the parameters of the device will have to be entered again in the settings app. This includes the WiFi password. Settings > general > reset > reset all settings.

• Satellite series A turn off for the game Command and Conquer 3

  Hi all

  This happened to me twice. While I was relax play skirmish Command and Conquer 3, computer laptop turns off suddenly. I was running an external power supply and the battery was full. What is even more strange, it was impossible to next turn to the until I removed the battery and plugged in.

  I bought this game around March and was able to beat the 3 campaigns without these attractions.
  I suspect that this may be caused by overheating, because after the laptop is pretty hot. What do you think? I bought it in January.

  In my Office I occasionally removed the fan and radiator vacuum, there accumulates a lot of dust sometimes. It is not easy in the case of laptops. Any suggestions? See you soon.

  Hello

  You should do a bios update, because I had a similar problem with my A100 and after updating the bios to the version the most recent (5.60) I had no problem more. Maybe it helps.
  The other thing is, if you have a ventilation system which is clobbed with dust, then you should take a container with compressed air (you can get it in every electronic market/store) and gently lead some air to breath through the ventilation holes. (like 2 seconds. Wait, then wait 2 seconds and so on; just make short sounds :))
  Then, ventilation must be clear.
  Otherwise bring your machine to a service partner for a checkup of material because some loose cables inside the machine could probably be a reason that the machine feeds not correctly on...

  Welcome them

• Command and Conquer Zero Hour does not

  There's this game: Command and Conquer Zero Hour

  He used to work on windows XP but now on windows 7, it does not work I do not know why...?

  This is the same version that worked on XP...

  I FOUND THIS POSTED BY SOME GENIUS CALLED DARKRAJIN AND IT WORKS ON THE GENERALS AND THE GENERALS ZERO HOUR

  This I found on another page and thought I'd share it here as long as it worked for me.

  I have a core i5 laptop running windows 7 Home premium 64-bit with an ATI graphics card and I had exactly the same problems to make C & C Generals and zero hour to work.

  Good news - just managed managed to make it work, and it IS Windows 7 that causes the problem, specifically, it is to do with permissions to access the folders - Windows 7 blocks access to the folders that uses General to run.

  The way I fixed it was:

  In 'My Documents' (usually to the C:\users\YOURNAME\documents), there should be a folder named "Command and Conquer Generals data" or "Command and Conquer Generals Zero Hour data", which was put there when you installed the game.  You must create a text file in Notepad, and then save it in that folder.  However, you need to click on ' Save as ' and change the drop-down list box as text (.txt) file type to "all files".  Then save the file as "options.ini."

  Before you register, paste this text into the file to start:

  Anti-aliasing = 1
  BuildingOcclusion = yes
  DrawScrollAnchor =
  DynamicLOD = no
  ExtraAnimations = yes
  GameSpyIPAddress = 0.0.0.0
  Gamma = 50
  IPAddress = 0.0.0.0
  IdealStaticGameLOD = high
  LanguageFilter = true
  MaxParticleCount = 5000
  MoveScrollAnchor =
  MusicVolume = 55
  Resolution = 1024 768
  Retaliation = yes
  SFX3DVolume = 79
  SFXVolume = 71
  ScrollFactor = 50
  SendDelay = no
  ShowSoftWaterEdge = yes
  ShowTrees = yes
  StaticGameLOD = custom
  TextureReduction = 0
  UseAlternateMouse = no
  UseCloudMap = yes
  UseDoubleClickAttackMove = no
  UseLightMap = yes
  UseShadowDecals = yes
  UseShadowVolumes = yes
  VoiceVolume = 100

  It's just how the game remembers what options you chose (the music volume, brightness and others) and you can change them once the game is running using the menu options.

  Now the bits of the key - first, make sure you have full read/write permissions for the folder Command and Conquer Generals data: to do this right click on the file, then properties then the Security tab and change the permissions for all users.  It could also be useful in making sure that no file is 'Read only' in this folder.

  Change the compatibility mode of the game by right-clicking on the game in the start menu, click Properties, click the Compatibility tab.  I used the "Change settings for all users" button down and changed to Windows XP (SP3), as well as to check the "run as Administrator box".

  Hey Presto! It worked, demystify the myth according to which C & C Generals will not work on 64 bit systems (as some people have said).  In all honesty, I have not tried online multiplayer yet, a few skirmishes.

  Good luck!