Go to the source of a table of contents entry

Similar Questions

• What are the advantages and disadvantages of the use of a table of contents?

  Captivate v5.5

  I see the advantage of a table of contents that allows for the learner to see and then navigate (jump) to a specific section in a project.

  However I am unclear what role (if any) a table of contents would play if for example I have a project and I want to assure learners do not "jump" from slides/subjects and must take the project slide by slide.

  Apart show what is covered in the project and too much space on each slide vaulable, am I lack clear advantages / benefits by using a table of contents in these projects where I don't want users to have the right of skip?

  No matter which input based on past appreciated experience.

  Noel

  New: http://lilybiri.posterous.com/custom-playpause-button-in-captivate

• Right align page numbers which is found to the left of the table of contents entries

  I posted a similar question a while ago I think that substances or Peter replied, but darn if I can find the thread. At that time, they provided a script that does a GREP search, find a sentence that starts with a number and its replacement by a tab. I still have the script, but for some reason, it does not properly with my new table of contents page layout. It must insert a tab on the left page number (page numbers are to the left table of contents entries) and force the numbers right aligned so that a single-digit right page number aligns with the right edge of a two-digit page number.

  Find: ^ (\d+)
  Change to the: \t$1

  What is happening in the new table of contents, this is the script is a figure and inserts a tab to the left of the page number. Page numbers are moving to the right, but they do not align right. They are further to the right, but they themselves numbers correspond to the left.

  I'm puzzled as to why the script does not work on this new layout. Now I use CS4 and it still works on the former route. Nothing terribly different about the new layout except that the column is much closer, and there are several columns threaded in the TOC instead of a long column and the chapter titles do not have page numbers (but all other entries have page numbers.)

  We should probably set the tabulator in your paragraph style: a tab aligned right for the numbers, followed by a tab stop that is aligned to the left to the text that follows this number. (I guess that there is a tab after the number.)

  Peter

• Plan the work that runs according to max date in the source to create table

  Hi all
  
  I am trying to create an automation in my sql. Basically, I have a table I do reporting and analysis on which is a subset of records from a source table. For the purposes of this example, I called the source table "src_table" and my table as the target table, "tgt_table." Essentially the source table gets updated with a value again months from date (founded order_dt) and I have a procedure I call when the source table is updated to load the value of the new month of records in my target table. So let say June 2012 data is loaded in the source table, I call my procedure that has a date parameter and enter June 2012 as the point of departure date so that it looks for new records in the source table from June 1, 2012 and load it into my target table. For variety reasons I won't get in, my goal in a position is not a view, there must be a stand alone table. The problem is that the source never table gets updated at the same speed interval... sometimes they will load a new months of data at the beginning of the following month, sometimes medium of the month... sometimes I have to wait a few months to get another month of data. So, whenever I get a email notification telling me another month of data is loaded in the source table, I have a windows batch file that runs my setting... I just have to change the start date (based on the order_dt column) and run it. I want to do is automate the process so that I did not yet do. What do I think creates a task that runs every day or even at the end of each month, this work has basically seized the date of maximum order of the source table and if the date of the order is greater than the maximum order date in my target table, it runs my procedure that loads the new month with a value of data in my target table. Thus, for example, my maximum order of my target table date is May 31, 2012. The work runs at a certain period of time and check the maximum date on the source table, if the maximum date is May 31 nothing happens... new data has not been loaded so does not perform the procedure. If the maximum date on the source table is June 30, 2012, the maximum date is greater than the maximum in my table target date so that the procedure runs. I need also the procedure to insert records into the table in the source where the order date in the source table is > = at the time of maximum order in the target table.
  
  In a Word, this is what I need but I'm not sure how to put in place. The procedure works fine... all I need is an interim procedure that runs as a scheduled task every x number of days and the date of maximum order check on the source table if it exceeds the maximum order on my table of target date it runs my procedure. My procedure is called "insert_new_orders" and when I run it I run it like:
  
  execute insert_new_orders('01-jun-2012');
  
  If anyone can help me with what would be great :-)
  
  Thank you
  Ed

  To start:
  You must remove the EXECUTE keyword.

• Sensitive HTML5 seems to be the construction of a table of contents with a "bc-#" at the end of the favorite locations leading to failure. Can this be avoided?

  RoboHelp11 generates a table of contents where the places of the xxxx.htm #aaa of the form have a bc '-' and a final number added.  In the same place that a link in the text does not.

  No doubt there are some settings that causes this.  How can I disable this addition?

  What is the fault you are experiencing?

  The #bc-# are added when a subject is used repeatedly in the table of contents. HR uses this fact to know what breadcrumbs that they must. To avoid this, use excerpts rather than add the topic to the table of contents, several times.

  Kind regards

  Willam

• None of the links in my table of contents or INDEX works. Can not find file is the error message.

  The files on a network drive. Win7. FM 8. I renamed the files. Regenerated. Created a new book. Nothing works.

  I have no dashes and underscores in file names, but no other special character.

  Need for emergency assistance.

  The error message is:

  Can not find the file named

  \SOL\Data\TechDocs\DRAFT\Shiva\OperatorManual\096-0461-001C-1.

  FM.

  Make sure that the file exists.

  ______________

  Note that the table of contents and INDEX are listed in the book without a path while the chapter of body is the entire path (above) in the book view.

  Thank you

  IIRC, FM8 had a problem with a path with no subfolders 5 (or 6?). Try to put files up to a few levels or create a mapped network drive down to the lower levels.

• Page indent the problem with the table of contents entries...

  I have a few entries of table of contents running on more than one line. I would like the text to be indented from the establishment right indent/margin so that text does not as far as the Page numbers on the right margin of the text TOC block extend existing. I put a tab on the right so that the page numbers are tabulated on the right edge of the frame, but if I bring you the right margin with several (currently 5 mm) indenting, I can't have a tab stop to the page outside of the right margin.

  If I insert soft-return/new line tanks they wil get lost every time I have rebuild the table of contents (there will be a lot of it!)

  Any ideas, I'm sure it happens all the time for designers of the book.

  The same way you have a withdrawal of first line, on the left there is a final withdrawal of the straight line. You can set the right two inches (for example) withdrawal and removal of stretch to neutralize two thumbs, all on a single line will go completely to the right of the frame, and any point edge requiring line breaks will break two inches to the left of the right edge of the frame, while the last line will go to the right edge.

  

• Problem with proper alignment of the character in my table of contents Styles

  Hi all!

  I'm working on my first book project and I have read so many threads here for the last hour, but I either just don't understand, or I have not found that I still had, so I apologize already where this question has been answered before...

  OK, so... I'm building my OCD and have set up corresponding TOC styles with paragraph styles used throughout the book.

  what I want is for the page number must appear before the entrance. so for the page number I put in place its own table of contents page number character style.

  NOW

  the page number appears left aligned. I checked the palette styles of character and here I can not put a tab for the page number appear stalled right...

  How can I get this page number to be propped right? and THEN, how can I specify the distance between the page number and the entry? There is "tab" mentioned in the Table of contents dialog box to specify the distance between the page number and the entry, but then I have to go manually every time something changes? that it is impossible? I saw in the palette paragraphy styles there is a section of tab... tried to grasp the tabs so the number seems to be right aligned and the distance to the entry, but nothing happened, then the number is glued directly to the entrance once the table of contents are generated...

  What's a sense?

  attach a screenshot in an attempt to clarify the question...

  hope you can help out me.

  Thank you very much in advance!

  see you soon

  STA - cy

  

  I played with this for almost an hour, and as much as I know there is no way to adjust the alignment of the page numbers in the table of contents, suggesting off the beaten path.

  After testing a whole bunch of stuff that didn't work, I came up with the somewhat strange solution, but not impossible to simply change the table of contents manually to insert the required number of spaces listed in each entry. It takes the police that you use for numbers has Lining Figures, and you specify that, in the style, but a solution of script (and I don't know if it is possible) which are the best that I can offer. To set the distance of the number on the text, use a tab and set the position as part of the style.

• change the colors of level table of contents

  RH8 HTML

  Hi all

  Ive had a request come out while changing the level colors in the table of contents for a webhelp project.

  AFAIK, you can define only a single color in the skin with HR settings, however I'm trying to track down the output file, where it is defined and perhaps add additional code to set the different colors of level.

  Does anyone know which file or piece of code is the control?

  Thank you

  Nick

  Hello

  You can use css to achieve this effect. You can modify the TocWriteClassStyle function in whthost.js or you can create a block of style/stylesheet.

  The normal color of the text is controlled by 'A' (the links are). It is the top level of the table of contents. All deeper levels are div with the class ".one". So ".we" do the second black TOC level. ".we .we" made the second red level. I tried this on a table of contents level 4 and I could give a different color to each level.

  There are two notes:

  -You can't repeat .we .we indefinitely. I thougt you could use four elements or so Max CSS is no longer valid and the styling breaks. Do not know why but...

  -When you use A .we, this color not only all the links of second level and third level links, etc. These links also meets the condition: a link in an item with classname 'child '. If you need to go to several levels (more than four), this method may not work for you.

  Take a bow

  Willam

  This email is personal. In our view, full disclaimer, please visit www.centric.eu/disclaimer.

• You order your topics TOC for the automatic creation of table of contents

  
  
  I recently inherited a help file. Our COMPUTER service complete updates of the application and generates content for the help file, I include in the file, generate the JAR file and transfer to programmers to integrate into the final product.
  
  I have OCD instructions to 'Automatic Creation' whenever I finish my updates. It all works well, except that the client has the hope that the table of contents will be in a specific order. The routine of automatic creation of guard placing books and pages in alphabetical order. I have to use them whenever I generate.
  
  Does anyone know how to force the books and pages in one order other than alphabetical?
  
  I appreciate your help! This task is a bit tedious.

  Very nice answer. We have not neet to autocreate every time. Perfect.

• How indent, via tabs, table of contents entries?

  Hello

  I fight with my OCD. I want it be displayed with the growing number of tabs on the left side, as the three levels of title (title 1, 2 and 3)

  One header... 1

  Header two... 2

  Header three... 3

  I'm just not getting it. Tried various methods and guides found on the net. But in vain.

  Can someone point me to a tutorial that really shows how he's doing, or explain it to me?

  Thanks a lot for the tips!

  Work around:

  apply a style to each heading paragrph include with left indent and tab to the right side.

  

  -------

  Creating a table of contents

  http://help.Adobe.com/en_US/InDesign/CS/using/WS49FB9AF6-38AB-42fb-B056-8DACE18DDF63a.html

• Insert data into the source of destinator Table

  Hi all

  Need to insert data in sample_table1 table xxc_source_table sample_table2

  create table xxc_source_table (DESCRIPTION varchar2 (10));

  Insert the table xxc_source_table values('A201.) ABC.4084.GR');

  create table sample_table1 (col_1 varchar2 (10), col_2 varchar2 (10), col_3 varchar2 (10), col_4 varchar2 (10));

  create table sample_table2 (col_1 varchar2 (10), col_2 varchar2 (10), col_3 varchar2 (10), col_4 varchar2 (10), moved_flag varchar2 (2));

  col_1 = A201

  col_2 = ABC

  col_3 = 4084

  col_4 = GR

  Note: Insert data into the col_1, the col_3, the col_4 of the xxc_source_table sample_table1

  (2) if the next (form xxc_source_table) data is exist in the sample_table2, and then set the moved_flag as Y in this column

  3) xxc_source_table has 17000 lines

  Thank you.

  Post edited by: Rajesh123 please do not consider cross the line message

  Hi Renon,

  Why you don't want substr and instr? For best performance, you should go with substr and instr instead of regexp_substr. However you asked me to provide the code instead of substr and InStr. Then try the below...

  INSERT ALL

  IN VALUES sample_table1 (col1, col2, col3, col4)

  IN sample_table2 VALUES (col1, col2, col3, col4, 'Y')

  SELECT REGEXP_SUBSTR (DESCRIPTION,'[^.] +', 1, 1) col1,.

  REGEXP_SUBSTR (DESCRIPTION,'[^.] +', 1, 2) col2.

  REGEXP_SUBSTR (DESCRIPTION,'[^.] +' 1, 3) col3.

  REGEXP_SUBSTR (DESCRIPTION,'[^.] +' 1, 4) col4

  OF xxc_source_table;

  Thank you

  Ann

• Try to generate PDF - "not found any table of content entries.

  Hello

  Please can someone help?

  I am trying to generate a PDF version of our Robohelp file (in Robohelp 10) for users to download (the file is a help file for our software).

  However, when I generate it using the option "Printed material" in the single Source layouts, either in PDF or Word doc, it only builds a two page document with the name of literature printed on the first page, and 'no table entries of content not found' printed on the second.

  The file was imported from an older version of Robohelp, if that helps.

  Thank you very much in advance for your help.

  Waiting for Dan

  Create a new print layout, not a duplicate. Run the wizard by default other than him affecting only to create a Word document on the first page and applying your model on the last page.

  Not better then?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• text too close to page number in the table of contents

  Most of the time I can take care of unattractive line breaks in the table of contents by putting in the nonbreaking spaces in a paragraph.

  However, sometimes I have a situation where a table of contents entry text is too close to the page number right. The text is so close to the page number as in some not case of presentation of points of the leader, or show only one or two points of leader.

  Writing and its adjustment page number on one line, then putting in the nonbreaking spaces won't solve the problem. I could put in a soft return (SHIFT-ENTER) in the table of contents entry to force a line break, but it is not effective because I have to put in the soft return manually every time the table of contents are updated.

  If someone has a tip on how to effectively manage this problem, I would like to know about it.

  Jay,

  Some time ago, someone posted a solution to make the line nice breaks in the index entries. It's setting values of the minimum and maximum word spacing in the paragraph Designer. The values validated it did not worked for me, so I played a little with it and use the following syntax:

  In the paragraph format for table of contents entry, set the maximum word spacing of 325% and oral minimum spacing to 275% and the optimal spacing to 100%. Note the fact that the optimum is NOT between the minimum and maximum values. I don't know the algorithm that Frame uses to decide where the line break, but I'm guessing he first decides to break the line to fill the max and min requires, breaks the line, but changes the spacing back 100%, which is what you want then, in other words, we don't want large spaces.

  The causes of values above a line break about an inch or two to the right margin. If you want to close, try 225 percent and 175 percent. I found that over these two issues of line breaks occur further from the right margin.

  This method does not have to enter the manual line breaks and gives a nice line break, even for those rows that could fit on a single line.

  Good luck

  Van

• Generic procedure to load the data from the source to the table target

  Hi all

  I want to create a generic procedure to load data of X number of the source table to X number of the target table.

  such as:

  Source1-> Target1

  Source2-> Target2

  -> Target3 Source3

  Each target table has the same structure as the source table.

  The indexes are same as well. Constraint are not predefined in the source or target tables.there is no involved in loading the data from the business logic.

  It would simply add.

  This procedure will be scheduled during off hours and probably only once in a month.

  I created a procedure that does this, and not like:

  (1) make a contribution to the procedure as Source and target table.

  (2) find the index in the target table.

  (3) get the metadata of the target table indexes and pick up.

  (4) delete the index above.

  (5) load the data from the source to the target (Append).

  (6) Re-create the indexes on the target table by using the collection of meta data.

  (7) delete the records in the source table.

  sample proc as: (logging of errors is missing)

  CREATE or REPLACE PROCEDURE PP_LOAD_SOURCE_TARGET (p_source_table IN VARCHAR2,

  p_target_table IN VARCHAR2)

  IS

  V_varchar_tbl. ARRAY TYPE IS VARCHAR2 (32);

  l_varchar_tbl v_varchar_tbl;

  TYPE v_clob_tbl_ind IS TABLE OF VARCHAR2 (32767) INDEX OF PLS_INTEGER;

  l_clob_tbl_ind v_clob_tbl_ind;

  g_owner CONSTANT VARCHAR2 (10): = 'STG '.

  CONSTANT VARCHAR2 G_OBJECT (6): = 'INDEX ';

  BEGIN

  SELECT DISTINCT INDEX_NAME BULK COLLECT

  IN l_varchar_tbl

  OF ALL_INDEXES

  WHERE table_name = p_target_table

  AND the OWNER = g_owner;

  FOR k IN l_varchar_tbl. FIRST... l_varchar_tbl. LAST LOOP

  SELECT DBMS_METADATA. GET_DDL (g_object,

  l_varchar_tbl (k),

  g_owner)

  IN l_clob_tbl_ind (k)

  FROM DUAL;

  END LOOP;

  BECAUSE me IN l_varchar_tbl. FIRST... l_varchar_tbl. LAST LOOP

  RUN IMMEDIATELY "DROP INDEX ' |" l_varchar_tbl (i);

  DBMS_OUTPUT. PUT_LINE (' INDEXED DROPED AS :'|| l_varchar_tbl (i));

  END LOOP;

  RUN IMMEDIATELY ' INSERT / * + APPEND * / INTO ' | p_target_table |

  ' SELECT * FROM ' | '. p_source_table;

  COMMIT;

  FOR s IN l_clob_tbl_ind. FIRST... l_clob_tbl_ind LAST LOOP.

  EXECUTE IMMEDIATE l_clob_tbl_ind (s);

  END LOOP;

  RUN IMMEDIATELY 'TRUNCATE TABLE ' | p_source_table;

  END PP_LOAD_SOURCE_TARGET;

  I want to know:

  1 has anyone put up a similar solution if yes what kind of challenges have to face.

  2. it is a good approach.

  3. How can I minimize the failure of the data load.

  Why not just

  create table to check-in as

  Select "SOURCE1" source, targets "TARGET1", 'Y' union flag double all the

  Select "SOURCE2', 'TARGET2', 'Y' in all the double union

  Select "SOURCE3', 'Target3', 'Y' in all the double union

  Select "SOURCE4', 'TARGET4', 'Y' in all the double union

  Select 'Source.5', 'TARGET5', 'Y' in double

  SOURCE	TARGET	FLAG
  SOURCE1	TARGET1	THERE
  SOURCE2	TARGET2	THERE
  SOURCE3	TARGET3	THERE
  SOURCE4	TARGET4	THERE
  SOURCE.5	TARGET5	THERE

  declare

  the_command varchar2 (1000);

  Start

  for r in (select source, target of the archiving of the pavilion where = 'Y')

  loop

  the_command: = "insert / * + append * / into ' |" r.Target | ' Select * from ' | '. r.source;

  dbms_output.put_line (the_command);

  -execution immediate the_command;

  the_command: = 'truncate table ' | r.source | "drop storage."

  dbms_output.put_line (the_command);

  -execution immediate the_command;

  dbms_output.put_line(r.source ||) 'table transformed');

  end loop;

  end;

  Insert / * + append * / into select destination1 * source1

  truncate table SOURCE1 drop storage

  Treated SOURCE1 table

  Insert / * + append * / to select TARGET2 * in SOURCE2

  truncate table SOURCE2 drop storage

  Treated SOURCE2 table

  Insert / * + append * / into select target3 * of SOURCE3

  truncate table SOURCE3 drop storage

  Treated SOURCE3 table

  Insert / * + append * / into TARGET4 select * from SOURCE4

  truncate table SOURCE4 drop storage

  Table treated SOURCE4

  Insert / * + append * / into TARGET5 select * from source.5

  truncate table source.5 drop storage

  Treated source.5 table

  Concerning

  Etbin