gombkormny 2 gombos 5.1.2600.5512

Similar Questions

• My system restore function has a problem, error: AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll

  original title: my system restore function has a problem

  my system restore function has a problem

  error signature

  AppName: rstrui.exe AppVer.5.1.2600.5512 ModName: c:\windows\system32\srrstr.dll
  ModVer.5.1.2600.5512 offset 00009836

  What can I do to recover my system restore feature?

  I was going to do an installation of hotfix os from the orignal disc but got waring the operating system installed is newer than the one on the disk (I have installed the latest service packs)

  Hello

  1 did you changes to the software to the computer?
  2. what happens when you try to use the system restore? You get the error message?

  You get this error message if you already have a newer version of the operating system and then if you try to install an older version on it.

  Method 1.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2.
  Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows XP Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows XP.
  e. when Windows starts, try using System Restore and verify.
   
  Hopt this helps.

• Event ID: 1000 - Faulting application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, fault 0x0000a81a address.

  Failing application vstudio.exe, version 13.0.0.0, failed module msvfw32.dll, version 5.1.2600.5512, address failure 0x0000a81a. After execution of the application for a day or two, the application closes.  The event log has been as above.  I ran "sfc/scannow" but he has no apparent effect.  Nothing in the log of events to indicate any repaired or replaced file.  How do I know if msvfw32.dll is bad, and if it is, how do I replace it.   If this is not bad, what else could be the cause?

  You run Microsoft® Windows® Update?  There are a couple of security updates for Visual Studio, DirectShow and Quartz which involve the msvfw32.dll and vstudio.exe.  Try and let the forum know if this helped.

• my card mother ibm no speaker internal, convenience stores, said driver is missing, driver 5.1.2600.5512.

  Can someone help me find the driver download, microsoft just says it can't find it, it may be obsulete, but M/Board is 2005, I know it's IBM, lenovo, and try talking to them is like talking to a brick wall, really do with help, im a beginner so don't know much, I can not hear the beep on stert upward or any other eror beeps Driver 5.1.2600.5512

  If your computer is a Lenovo you visit their website, specific to your model to download / update the drivers, you don't use MSUpdate or search for drivers via a third party site.

  If you get any beeps startup, which has nothing to do with the drivers, 'beeps' are produced by the system BIOS. It seems labour once victory is running? the volume control is set or are Mute speakers?

• Failing application moviemk.exe, version 2.1.4028.0, failing qedit.dll module, version 6.5.2600.5512, address failure 0x0001af23.

  At the opening of Director, that it does not open.

  Try the following to unregister and then reregister the qedit.dll file:

  1. Close Windows Movie Maker 2.1 (if it is running)
  2. Go to "start > run" and type regsvr32 qedit.dll/s/u in the "Open" box and click on 'OK '.  This unregisters the qedit.dll
  3. Go to "start > run" and type regsvr32 /s qedit.dll in the "Open" box and click on 'OK '.  He re-entered the qedit.dll
  4. Open Windows Movie Maker 2.1 and see if the problem is resolved

• The hardware found is not supported by this package idt

  I reinstalled windows xp, but now I can not install the audio driver and get the error message, as shown in the subject line, I think I also downloaded the latest BIOS drivers but the problem persists. Here are the specifications of my laptop (that I saved this last time, when my laptop was working fine) thanks for the help.

  HP Mini 110-1025DX PC
  Product number: VA723UA -.
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Mini 110-1000
  BIOS: KBC Version 02.0 B
  Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
  Memory: RAM 1016MB
  Page file: 514MB used, 1927 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  Hello

  Try this version, see if it helps

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & DLC = in & softwareitem = ob-78626-1

• Satellite Pro M70-220: Microsoft Kernel DLS driver reinstall

  I'm having a problem with the "Microsoft kernel DLS synthesizer" (on my laptop Satellite Pro M70-220).
  that very well, I would appreciate some help to solve.

  My questions are in * "BOLD" type * at the bottom of this post.

  In the device under the "Sound, video controller & games" Manager type of device, I found a yellow exclamation point
  mark against "The Microsoft kernel DLS synthesizer".

  When I right click on the entry for device 'Microsoft Kernel DLS Syntheizer' and select 'Properties', the
  more info is given under the general tab:

  Microsoft kernel DLS synthesizer
  Device type: sound, video controller & game
  Location: Location 0
  Device status: Windows cannot load the driverfor of this hardware device. The driver may be corrupted or
  missing (Code 39)
  Click Troubleshoot to start the troubleshooter for this device.

  Before clicking on the resolution of the problems, I checked the info on the "Driver" tab, which is:

  Microsoft kernel DLS synthesizer
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows component Publisher

  When I click on the button "Driver Details" tab driver, the information given is:

  Microsoft kernel DLS synthesizer

  Driver files:
  C:\Windows\System32\drivers\D.music.sys
  C:\Windows\System32\drivers\lvusbsta.sys
  C:\Windows\System32\drivers\Tvs.sys

  Provider: Microsoft Corp.
  File version: 5.1.2600.5512(xpsp.080413-2018)
  Digital signer: Microsoft Windows Publisher

  On the 'Détails' tab in the properties box, the given info is:

  Microsoft kernel DLS synthesizer
  Device ID of Instance
  \DMUSIC SW\ {8C07DD50-7A8D-11D2-8F8C-00C04FBF8FEF}

  * Troubleshooting: *.
  When I click on the "store" on the general tab, a page "Toshiba Help & Support" is displayed.
  who gives the instructions to uninstall and reinstall the device. Uninstallation instructions are simple:

  Go to Device Manager > right to uninstall click Device > click Surdesinstaller > in the "withdrawal of the device confirm.
  Dialog box, click OK.

  My concern is with the "relocation of the device" instructions, which are:

  Close all programs > start the Add Hardware Wizard > click Next and Windows Search Plug &
  Play devices.
  If no device Plug & Play are found, a list of devices appears > click on "Add a new hardware device" > click Next > click
  "manually install the hardware that I select in a list" > click Next > in the "Common material Type" list
  Click the appropriate device category > click Next > in the manufacturers list, click the manufacturer of your
  device > in the "Models" list, click the name of the model OR click "have a disk, if you have an update or
  the manufacturer provided to install for your device driver > click Next and follow the instructions in the wizard
  to complete the installation.

  * Issues: *.

  * 1. What is "Microsoft DLS synthesizer" and what is its role? *

  * 2. Is "Microsoft DLS synthesizer" a device of internal device, as opposed to a 'Plug and Play '? *

  * 3. With respect to relocation instructions: *.
  * - what category of device "Microsoft DLS synthesizer" would be listed under? *
  * - in the list of "models", what the "model name" would be for the "synthesizer DLS of Microsoft? *

  * - for 'Disc' alternative option, where can I get/download a update or provided by the manufacturer *.
  * driver for "Microsoft DLS Synthesizer" of? *

  * - one disc 'a' Wizard allow you to select the folder on the hard disk that contains the *.
  * Downloaded (s)? *

  Note: I'm leaving the principle that the driver is corrupted so I'll have to download and install
  the uncorrupted driver.

  * Please indicate if there are any other installation information that I'm aware of.*

  Thank you very much for any assistance anyone who can offer.

  AlanCB

  Hello

  I've never heard of the Microsoft kernel DLS synthesizer and that's why I studied a bit.

  I found this MS developer site:
  http://msdn.Microsoft.com/en-us/library/aa940369.aspx

  It is said:
  The component of the Microsoft kernel DLS synthesizer provides the port of DMusic, content class miniport driver in the dmusic.sys file

  It seems that most of the problems with this kernel occur due to lack of SP2.
  If you have installed Windows XP you need to update the operating system to the State.
  All service packages must be installed!

• Satellite M40X - solve the problems of "Problem Devices"

  I recently installed windows XP on a TOSHIBA laptop and I have three problem devices listed. My own efforts to solve this problem have failed, so I hereby call for help.

  Information items is the following: -.

  SUMMARY OF SYSTEM INFORMATION
  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  Name of the system MIKE
  The TOSHIBA system manufacturer
  System model Satellite M40X ===> Satellite M40X 185
  Reference: PSM4XE-00Y00GFR
  System Type X 86-based PC
  Processor x 86 Family 6 Model 13 Stepping 8 GenuineIntel ~ 1596 Mhz
  BIOS Version/Date TOSHIBA V1.20, 31/03/2005
  SMBIOS Version 2.34
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MIKE\user1 user name
  HIS Western time zone standard time
  768,00 MB total physical memory
  Available physical memory 508,17 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Pagefile 1.83 GB of space
  Paging file C:\pagefile.sys

  PROBLEM DEVICES
  Network controller, the drivers for this device are not installed.
  PCI modem, the drivers for this device are not installed.
  Video controller (VGA Compatible) drivers for this device are not installed.

  My interest is in obtaining the list of problem devices cleared up.

  Hi, there are M40X drivers on the website which should solve these devices unresolved.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Install the graphic display driver /, the modem driver and network/network driver, wireless LAN driver.

• Application error: vmsnap23.exe

  Hello, all.

  This is my first post on this forum, so please be nice!

  Last month, I have an application error that occurs whenever I connect. It seems that the vmsnap23.exe application fails to start, but I don't know what it is (* or * else) so that I can fix it. Any ideas?

  I'm on XP (sp3 since yesterday)

  The event viewer shows this information:

  + Faulting application vmsnap23.exe, version 0.0.0.0, module failed ntdll.dll, version 5.1.2600.5512, address failure 0 x 00011669. +

  I have followed the Microsoft but have not found something useful here. The program is slightly on the C: and not in "program files", or one of the system folders.

  It is a program of Toshiba, part of XP * or * something questionable I can simply delete?

  Thanks for the research.

  See you soon!

  Ken

  Reading a few other forums I found an interesting comment on VMsnap23.exe. Supposedly this process belongs to McAfee VirusScan. McAfee is installed on your laptop?

• computer does not detect blank cd and does not burn cd

  I did a full restore on my pc, nearly a year before and before restoring the computer was able to detect blank CD and burn the cd now after restoring I noticed, it won't detect CD or burn CDs. Pretty well, I did a search on google and tried almost all the tips on adding option "Save" to change the values in the registers. Any advice would be appreciated, thanks in advance.

  HP Compac dc 7700 small form factor

  32 bit

  HP s/n [edited personally identifiable information]

  p/n rw503us

  The version of the BIOS/date: Hewlett-Packard 786E1 v01.09. 05/01/2007

  SMBIOS version: 2.4

  Drive D:
  Description CD-ROM drive
  Loaded media no.
  Type of CD-ROM media
  Name TSSTcorp DVD - ROM TS-H353A
  Manufacturer (Standard CD-ROM drives)
  Status OK
  Transfer rate is not available
  SCSI Target ID 0
  ID device PNP-IDE\CDROMTSSTCORP_DVD-ROM_TS-H353A___BA08___\5 & EC81A8F & 0 & 0.0.0
  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 03/08/2004 22:59)

  Hello EddieBonza,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are experiencing problems when your optical drive does not recognize blank disc. I'm sorry, but to get your question more than exhibition, I suggest posting in the trade forums, as the Hp Compac dc 7700 small form factor is a commercial product. You can do to the company - Compaq, Elite, Pro PC.
  
  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• TFncKy.exe problem after upgrade to XP SP3 on Satellite A200

  Hello

  After upgrade of XP SP3, I have problem with TFncky.

  _System_:
  A200/PSAE7
  -XP Pro (2 x with OS selector, 1 OS XP XP main, 2nd XP for games)

  _Problem_:
  After booting XP from my main XP installation I always get an error message pop up stating that there is no prob with TFncKy and TFncKy should be stopped. As "signature of the problem" I get the following:

  + AppName: tfncky.exe AppVer: 3.22.0.0 ModName: ntdll.dll +.
  + ModVer: 5.1.2600.5512 Offset: 00012ace +.

  With one of the following keys on keyboard always results in above described error pop up but key are functional:
  WinLogo, DEL, HOME, PGUP /-DN, END, right SHIFT, FN + keys F etc.

  My second installation of XP (Lite for games) short smooth after SP3 upgrade: no error TFncKy error message.

  As my second XP runs without any problems after SP3 I'm not sure if the proplem is related with + tfncky.exe + or + ntdll.dll +.

  BTW:
  What driver package includes "tfncky.exe? Toshiba controls?

  Thanks in advance for any information or advice for this problem!

  Best regards
  Andreas

  Hello

  the problem was already discussed in another thread: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18082

  The last message was probably the solution for the whole of the case. The mentioned user that "TfncKy.exe" belongs to the Toshiba Hotkey utility that only needs to be removed and reinstalled for this problem.

  In addition, it would be wise to check the registry with CCleaner for example before you reinstall the Hotkey utility.

  See you soon

• Satellite Pro L300 - 'problem adapter - driver not installed.

  I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very techinical so I would be grateful for simple answers.

  If you can help I would be very grateful.

  I went to Accessories - system information and here is the result:
  Connection TV/video Microsoft name [00000001]
  Card type not available
  Connection TV/video Microsoft product Type
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 1
  Service name NdisIP
  IP address not available
  IP subnet not available
  Default IP gateway not available
  Active Yes DHCP
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000002] RAS Async adapter
  Card type not available
  Card product Type RAS Async
  Installed Yes
  PNP ID of device not available
  Last reset 10/05/2012 07:09
  Index 2
  Service name AsyncMac
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available

  Name [00000003] Wan WAN (L2TP) Miniport
  Card type not available
  Product type Wan (L2TP) WAN Miniport
  Installed Yes
  ROOT\MS_L2TPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 3
  Service name Rasl2tp
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 04/08/2004-20:00)

  Name [00000004] Wan WAN (PPTP) Miniport
  Adapter Type wide area network (WAN)
  Product type Miniport Wan WAN (PPTP)
  Installed Yes
  ROOT\MS_PPTPMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 4
  Service name PptpMiniport
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 50:50:54:50:30:30
  Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 04/08/2004-20:00)

  Name [00000005] WAN (PPPOE) Miniport
  Adapter Type wide area network (WAN)
  Product type WAN (PPPOE) Miniport
  Installed Yes
  ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 5
  Service name RasPppoe
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 33:50:6F:45:30:30
  Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 04/08/2004-20:00)

  Name [00000006] Direct parallel
  Card type not available
  Product Type Direct parallel
  Installed Yes
  ROOT\MS_PTIMINIPORT\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 6
  Service name Raspti
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 04/08/2004-20:00)

  Name [00000007] Wan (IP) Miniport
  Card type not available
  Type of product (IP) WAN Miniport
  Installed Yes
  ROOT\MS_NDISWANIP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  Index 7
  Service name NdisWan
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address is not available
  Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 04/08/2004-20:00)

  Name [00000008] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  8 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address A4:3E:20:52:41:53
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000009] Realtek PCIe FE Family Controller
  Adapter Type Ethernet 802.3
  Product Type Realtek PCIe FE Family Controller
  Installed Yes
  PNP ID of device PCI\VEN_10EC & DEV_8136 & SUBSYS_FF641179 & REV_02\4 & 23F 5EDAD & 0 & 00E0
  Last reset 10/05/2012 07:09
  Index 9
  RTLE8023xp service name
  The 0.0.0.0 IP address
  IP subnet
  Default IP gateway not available
  Active Yes DHCP
  255.255.255.255 DHCP server
  DHCP lease expires 21/03/2012 13:23
  DHCP lease obtained 21/03/2012 12:23
  MAC address 00:1E:33:3F:0 D: 3RD
  IO port 0 x 00003000-0x00004FFF
  0xD0010000-0xD0010FFF memory address
  0xD0000000-0xD10FFFFF memory address
  IRQ channel, IRQ 16
  Driver c:\windows\system32\drivers\rtenicxp.sys (5.764.0702.2010 built by: WinDDK, Ko 228,90 (234 392 bytes), 21/03/2012 12:23)

  Name [00000010] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 10
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  MAC address 00:1E:33:3F:0 D: 3RD
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000011] wireless intermediate driver
  Adapter Type Ethernet 802.3
  Product Type Wireless intermediate driver
  Installed Yes
  ROOT\WSIMDMP\0000 PNP device ID
  Last reset 10/05/2012 07:09
  11 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\wsimd.sys (1.0.0.83, 56,06 KB (57 408 bytes), 12/04/2012 23:25)

  Name [00000012] Packet Scheduler Miniport
  Adapter Type Ethernet 802.3
  Product Type Packet Scheduler Miniport
  Installed Yes
  ROOT\MS_PSCHEDMP\0002 PNP device ID
  Last reset 10/05/2012 07:09
  12 index
  Name of the service
  IP address not available
  IP subnet not available
  Default IP gateway not available
  DHCP active No.
  DHCP server not available
  DHCP lease expires not available
  DHCP lease obtained is not available
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 04/08/2004-20:00)

  Name [00000016] Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Adapter Type Ethernet 802.3
  Product Type Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
  Installed Yes
  USB\VID_0BDA & PID_8198\00E04C000001 PNP device ID
  Last reset 10/05/2012 07:09
  Index 16
  Service name RTL8187B
  10.1.1.4 IP address
  255.0.0.0 subnet IP
  Gateway IP 10.1.1.1
  Active Yes DHCP
  10.1.1.1 DHCP server
  DHCP lease expires on 10/05/2012 08:10
  DHCP lease obtained 10/05/2012 07:10
  00: 1B: MAC address 9E:F4:09:A7
  Driver c:\windows\system32\drivers\rtl8187b.sys (5.1116.1226.2007 built by: WinDDK, 281.25 KB (288 000 bytes), 29/03/2012 09:41)

  Thank you!!!

  Can you please open device manager and check if this is some unknown device listed?

  By the way: see also http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78

• Satellite L300D and display of compatibility of the video driver vga

  whatever that means anyway... compatible vga... He used woork when I download the harware throughr Control Panel and no games that I download do not work on my computer.
  Here are some statistics on my computer...
  ------------------
  Information System
  ------------------
  Time of this report: 14/06/2010, 13:31:16
  Computer name: TOSHIBA-3B322C7
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.100216 - 1514)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Satellite L300D
  BIOS: InsydeH2O Version 1.90
  Processor: AMD Athlon (TM) 64 X 2 Dual - Core TK-57 processor, MMX, 3DNow (2 CPUs), ~1.9GHz
  Memory: 1918MB RAM
  Page file: 256 MB used, 3554 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  ------------
  DxDiag Notes
  ------------
  The DirectX files tab: no problems found.
  Display 1 tab: The system uses the generic video driver. Please install video driver provided by the hardware manufacturer. Features of Direct3D is not available. You should check that the driver is a final version from the hardware manufacturer.
  Sound tab 1: No problems found.
  Music tab: no problems found.
  Input tab: no problems found.
  The network tab: no problems found.

  --------------------
  DirectX Debug levels
  --------------------
  Direct3D: 0/4 (n/a)
  DirectDraw: 0/4 (detail)
  DirectInput: 0/5 (n/a)
  DirectMusic: 0/5 (n/a)
  DirectPlay: 0/9 (detail)
  DirectSound: 0/5 (retail)
  DirectShow: 0/6 (detail)

  ---------------
  Display devices
  ---------------
  Name of the map:
  Manufacturer:
  Chip type:
  DAC type:
  Device key: Enum\
  Memory display: n/a
  Current mode: 1024 x 768 (32 bit) (1 Hz)
  Monitor:
  Monitor Max RES:
  Driver name: vga.dll
  Driver version: 5.01.2600.0000 (English)
  DDI version: unknown
  Driver attributes: Final retail
  Format/driver Date: 04/08/2004 08:00, 9344 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: n/a
  Mini VDD: vga.sys
  Mini VDD Date: 2008-04-13 14:44:40, 20 992 bytes
  The instrument identifier: {D7B70EE0-4340-11CF-B063-282AAEC2C835}
  Vendor ID: 0x0000
  Device ID: 0x0000
  SubSys ID: 0x00000000
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel:
  Deinterlace caps: n/a
  Registry: OK
  DDraw status: not available
  D3D status: Not available
  AGP status: Not available
  DDraw Test result: does not work
  D3D7 Test result: does not work

  Hey girl

  What is your real problem with your laptop satellite?
  Installation of the display may be driver?

• HL-DT-ST DVD-RAM GH15L does not read the DVD with XP in s3621sc, new driver?

  I (after the good advice in the forum OS) successfully installed Win XP instead of Vista factory.

  Now, everything works fine except the DVD functions in CD/DVD unit.

  CD and music CD data can be OK reading and burning CD works. But the DVD doesn't work at all.

  When you try with Win Media player, it launches the program but says "wmplayer.exe har recognized a problem and needs to end" ad goes down.

  The use of HRT for the CD/DVD utit pilot system is old, July 1, 2001, version 5.1.2535.0

  The driverfiles gives the following information:

  \System32\DRIVERS\cdrom.sys C:\Windows

  \System32\DRIVERS\imapi.sys C:\Windows

  \System32\DRIVERS\redbook.sys C:\Windows

  \System32\storprop.dll C:\Windows

  All the:

  File version: 5.1.2600.5512 (xpsp.0804413 - 2108)

  Is there a more recent and better driver be used?

  After the Win medai player version 11 update and install a DVD decoder to update, it works fine.

  (I have installed Roxio Movie Player recommended by Microsoft)

• All installed crash of Labview versions since 8.2 install

  So, on my development machine, I had to LV7.0, 7.1, 8.0 and 8.6.  (As well as the different version of teststand, daqmx, nor-daq, tool boxes, etc...)  Then came the day, there is no if a long time (say two hours) I'd need LabVIEW 8.2.

  So I install it.  He finished and tells me to restart.  I reboot, and after trying to run the newly installed 8.2.1, I get "Labview 8.2.1 development system has encountered a problem and needs to close...". "AppName: labvie.exe AppVer 8.2.1.4002 with the same respective values for ModName ModVer.

  So I try one of my other installed versions, same for 7.1 8.0 and 8.6 except that 7.1 gives me ModName:msvcrt.dll ModVer: 7.0.2600.5512 rather than replicate the AppName and AppVer info.

  LV7.0 also tells me "the requested feature is not available in"c:\program files\NI\shared\license manager\Licenses"now, this folder contains a Labview_Labview_070000.lic file that has updated the marking of 21/03/2003.

  SignalExpress blocks the same way with ModName: ntdll.dll ModVer: 5.1.2600.5512.

  Now, another thing funny.   Manager licenses OR ceases to operate the same way.  AppName: nilmutil.exe AppVer: 3.3.0.39 ModName: ntdll.dll ModVer: 5.1.2600.5512.

  My current version of TestStand (3.5) accidents in the same way.  The version selector works.  Just spilled to 3.1 and it tells me "could not initialize the TestStand engine.  System-level exception. "Spilled the 4.1.1 and it throws up the home screen briefly then just sits in the background.  No CPU cycles only, no memory, no sequence editor use delta.

  CVI 8.5 gives: fatal internal error to 001 B: 7C9108D3.  LabWindows/CVI is abandoned.

  CVI 9.0 gives an Application error: the instruction at "0x7c9108d3" referenced memory at "0x656d7572".  The memory could not be "written".  Click on OK to terminate the program.

  MAX 4.5.0f0 works and shows all these applications as installed.

  I've got 18 services or that run in the background.

  Help?  And please no answers ' uninstall/reinstall everything.  I bet that I've got 20 + hours in this thing over the last two months in the software OR / toolkit / driver installed and I can't afford to start all over again.

  Kind regards

  Mike

  A person on the line to support tech showed me the problem:

  Here

  Apparently, you can have 99 license living in C:\Program NIUninstaller Instruments\Shared\License Manager\Licenses files.  License #100 brings the party to a halt.  I think it's something that should be fixed because each major toolkit has one or more licenses and even the Labview development versions will sometimes install 20 + full license on an installation files.