The hardware found is not supported by this package idt

Similar Questions

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• How can I fix the Netflix "Sorry, the video is is not supported on this platform." on Sony TV KDL40EX640?

  Netflix has worked, but I get the message "sorry, video is not supported on this platform." now. I have a Play 3 station I spent to watch Netflix movies. The PS3 was supposed to do a software update before he would play movies. How can I get the TV on Internet Netflix movies to replay? Thanks, Larry

  Hello Larry,.

  Welcome to the community of Sony.

  This problem has been resolved and is now available in your TV to Netflix.

  If my post answered your question, please mark it as an "accepted Solution".

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• Microsoft Management Console error: this function is not supported on this system. Also noticed that the automatic updates did not install it and returned error 80070005.

  Original title: Microsoft Management Console this feature only is not supported on this system

  I am running Vista 32 bit Business since an administrator account.

  Recently, I noticed that the automatic updates did not install it and returned error 80070005.   After investigation, I found that I could not open mmc at all and always get the message "this function no is not supported on this system.  No major changes have been made to the configuration to trigger it and I can't watch the event log because it is in the MMC.
  I have studied this question in line and tool the following actions, which none worked:
  carried out a complete antivirus scan (I use Commodo internet security)
  created another account administrator
  has run SFC (no problem)
  has run the registry cleaner (no problem)
  has run msconfig.exe and disabled all the startup process
  updated windows right click and run as administrator
  Started in safe mode and tried all above
  After that, I don't know where to go... it doesn't seem to be a download for Windows vista to reinstall mmc.
  I have about 50 updates critical, sitting in my windows update that can not install because of this problem.  Can anyone help?
  Jeff

  Hello Helpmehelpme,

  First, I would check since it is professional Vista was that computer on a field of work or it was already on an area of work? There may be group policies that are in place that prevent to run MMC.

  When did start to happening? Is there anything new on the system which has been introduced into the environment (software, hardware)?

  This thread gives a few steps trying to the original poster that you can't have.

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul

• After installing Firefox 8.0 I will be able to accept the Norton Toolbar add-0n or if it is not supported by this version?

  I just went to level to Firefox 8.0 and a message appears saying that Norton Toolbar is not supported by this version of Firefox. This literally means that it is not supported or I will be able to accept it as a 3rd party module approved? If it is not supported, you have plans to support in the future?

  Because the patch only for Norton 2011,2012 and 360, in order to obtain the fix, you must switch to product 2011 or 2012... the upgrade are free pireod license and you can activate your product with existing license
  Here is the statement for details on how to find your version, the upgrade and how to apply the patch

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-8-support-for-Norton-toolbar/TD-p/581516

• niDMM.cs exception: "the device was not recognized. The device is not supported with this driver or version. »

  Hi all!

  I have a question about using a DMM (PXI-4065) with VStudio 2008 and Measurement Studio 2009.

  Because DMM are not always supported in .net, I downloaded niDMM.cs 3.0 wrapper of the web site of NOR.

  I also downloaded example c# measure DC Voltsto compare with my request.

  Both an example and my application fail trowing the exception [-1074118656] 'the device was not recognized.  The device is not supported with this driver or version. " class constructor is called.

  DMM = new InstrumentDriverInterop.Ivi.nidmm ("PXI3::12:INSTR", true, true);

  I guess it is function of device PXI!

  I also tried to use a VISA alias as "pippo" and then I tried to insert a device unexistent name. In any case the same exception was trown.

  NOR-DAQmx 8.9.5

  NOR-DMM 3.0.1

  NI-VISA 4.6.1

  NOR-MAX 4.6.2f1

  Roberto

  Hello Robson,

  Maybe you areusing an incorrect descriptor itrument, try please the instructions contained in the following document:

  KB 33A96PCW: receive error-1074118656 when running OR DMM screws

  Let me know if this might help.

  Best regards.

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• Photo Gallery can't open this picture. The file format is not supported or you do not have the latest updates to the photo gallery?

  I received an email with pictures and the bos appeared Photo Gallery can't open this picture.  The file format is not supported or you do not have the latest updates to the photo gallery.  I am running Vista on a Toshiba laptop that I bought in July 2009.  What I can do to update the Photo Gallery or something else to see the pictures.  I tried to download Stuffit Expander, but which did not help.

  Hello
  Thank you for using the Microsoft Vista answers Forum.

  What is the file format of the images?

  All the pictures have the same symptoms?

  Disable the antivirus software on your computer and check if it works very well.

  Make sure you have all updates for your version of Vista.

  You can also try the new Windows Live Photo Gallery, as it has more features and should solve your problem.
  http://get.live.com/Photogallery/overview

  Please let me know if this helps you.
   
  Kind regards
  Yama - Microsoft technical support.

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Update of Muse CC 2014.3 still have FTP upload problem: the server responding is not in time, FTP is not supported on this server [connection has expired after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what I should do?

  Hello.

  Today, I had the opportunity to work with a user of Muse with the same problem after you perform the troubleshooting steps in the post above we decided to communicate with the host.

  Later, I learned to know that host IP of the user of Muse and they managed to unlock and muse began to connect to the FTP host.

  I have another host scenario suggests Muse to add user : 21 to the FTP address and then Muse was able to connect.

  For example ftp.domain.com:21

  Please try the suggestion 2 above and let me know if it works.

  Concerning

  Vivek

• Could not open install Assistant.  I get this error message: cannot install the application due to a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not

  How do I download a trial of 12 items, Adobe?

  I followed the instructions to download assistant... but get this message: the application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the author of the application.

  Hi alposer,

  Please delete the copy of Adobe Download Assistant you have installed, and then reinstall Adobe Download Assistant.

  Kind regards

  Rave

• I have a g5 witn 1 o Yes during the download process it says not supported on this architecture why

  I have a g5 witn 1 o Yes during the download process it says not supported on this architecture why

  A g5 is a 10 year machine. None of the current products of Adobe support there is no contemporary version of Mac OS x on such a machine. Hopeless case.

  Mylenium

• My Mac with OS 10.5.8 says I can't open Firefox because it is not supported on this architecture. I tried to update my version, and that's all I get now. What can I do to use Firefox again? Thank you.

  My computer is not allowing me to use any version of Firefox, after several attempts to download. Simply, I get a message that Firefox is not supported on this architecture, and the Firefox icon in my toolbar now has a circle with a line through it top (cancelled). I hope someone can explain what I need to do to be able to use Firefox once more. Thank you, TC

  As you have a PPC or Power Mac the last form of waiver Mozilla to work on the PPC is Firefox 3.6. *

  3.6.23 Firefox can be found at http://www.mozilla.com/en-US/firefox/all-older.html

  Since you have a PPC Mac, there is this option of third-party for Firefox 7.0.1
  http://www.floodgap.com/software/tenfourfox/

  From Firefox 4.0, a Mac Intel with OS x 10.5 + is required for versions of Mozilla's Firefox. http://www.Mozilla.org/en-us/Firefox/7.0.1/system-requirements/