my card mother ibm no speaker internal, convenience stores, said driver is missing, driver 5.1.2600.5512.

Similar Questions

• Whenever I try to print the convenience store said "a print job in the print queue prevents the other printing of print."

  Problem printing whats wrong with my laptop / printer?

  Whenever I try to print the convenience store said "a print job in the print queue prevents the other printing of print."  But there is no any other print jobs than that I try to print?

  TinaRandle,

  Try to run delete print jobs to remove all print jobs stuck in the queue.

  Don't forget to restart your computer.

  Rick

• Convenience store said Aero "Desktop Window Manager" must be activated, but it does not show how the help section? Convenience store told to look elsewhere for help.

  Convenience store Aero says that my 'Desktop Window Manager' was disabled, so I couldn't change my themes (I also suddenly lost 'glass').  But how to activate or activate 'Desktop Window Manager' and - the most galling - why didn't he appears in the help section?  Convenience store said he can help me and look elsewhere for help.

  Last changes: I did a clean install of Windows 7.  I turned off last night (everything works OK), and then it works again this morning :(

  I found the solution here - will post here just in case someone else gets this problem:

  go to the Control Panel and search for Services , under Administrative Tools , go to Services .

  go to the bottom of the window and you will find Desktop Window Manager Session Manager, right-click to choose from (including rebooting).

  PC restart and re - activate the Aero theme.

• I can't print, and convenience store said that the Epson scanner has no driver

  I can't print and said of the troubleshooter of the epson scanner dosen't have a driver. What should do?

  Original title: printer

  Hello

  1. what operating system is installed on your computer?

  2. What is the model of the printer?

  I suggest you to see link and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I would also update the drivers of the manufacture of the printer and check.

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

• Lexmark X 422 device driver is defective, ran a convenience store but driver does not correctly re-download

  exactly as the title suggests, I ran the store and he recommended that I have re-download the driver Lexmark X 422, but when I did this, the pilot did not download correctly

  Hello

  Check with Lexmark Support, their documentation and online drivers. As Lexmark OEM is responsible for
  for the proper functioning of the material and their drivers provided.

  Lexmark X 422 - click on drivers and downloads on the left side of the page - after drivers Windows
  are available on page 2.
  http://support.lexmark.com/index?locale=en&startover=y&userlocale=EN_US&question=X422&productCode=LEXMARK_X422_MFP&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.MULTIFUNCTION_LASER.LEXMARK_X422_MFP&searchid=1335571787645#5

  Lexmark - Support
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  Lexmark - drivers
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• No sound on computer and convenience store said computer has no mixer device

  my willingness to computer has no sound

  Computer is no sound.when troubleshooting says my computer has no mixer devices

  It seems that you have not installed the drivers for the sound. Look in the Device Manager. There can be no? "s for the sound. If so, you should know what is the make and model of your computer.

  Go to download site of the manufacturer of the sound drivers, then install them

• Replacement card mother Qosmio G10

  After replacing the card mother a Qosmio G10-120 original Win Xp MCE with the official update (FC43S1 A5A001749010 P000454980 jury), some problems have arisen:

  1. second HARD drive internal no more seen.
  2. all buttons stop "standby/disable rebooting the computer" do not completely take effect (office closed way unexpected but manual power button continues to show the color blue and portable remains active).
  3. always on cooling fan.

  Upgrade the motherboard consisted of:

  1. creation of new channels DMI Council (in particular "Model name" field was set to "Qosmio G10").
  2. loading the CD-ROM TCN0000006 official update tool.
  3. no recovery BIOS or EC/KBC.

  Any idea?

  I m wondering how you did update the information in the DMI?
  As far as I know that the Toshiba authorised service provider is able to update information DMI as the model name, version number, etc. using utilities and special tools.

  I googled for the motherboard part number, you have deposited in your original thread, and it seems that this motherboard has been developed the Qosmio F15 series.
  So maybe his bad card mother

• Satellite A350-how to disable the speaker internal while external speaker jack

  Hi all

  Anyone knows how I can cut the House speaker while connecting to the external speaker?
  I want to use my laptop in libuary, but when I plug in the headphones, the speaker still his, when I put in muted, the speaker and the headphones the two silent.
  How can I configure the silent speaker, while external speakers can only keep silent?

  > Knowledge how can I mute the speaker internal while connecting to the external speaker?

  I guess you have a Realtek sound card and Realtek HD audio Manager should appear in Control Panel.

  Please check this Realtek HD audio Manager.
  The speakers on the right tab, you will see the options analog & digital.
  Right click one of the option and check if you could see a few options that provide a framework in order to mute the speakers.

  You will also see the option called: the advantage of the device settings.
  Check this box too.

  PS; my laptop automatically the internal speakers if the headphones have been connected.
  I read in other threads that update the audio driver might help too, but first test the settings as mentioned above.

• Can I switch to an Intel Pentium D 945 on a card mother Napa-GL8E?

  Hello, I have a HP Pavilion a6403w with an Intel Dual - Core processor E2160 (1.8 GHz) on a card mother Napa-GL8E. I would like to know if it is possible to switch to an Intel Pentium D 945 (3.4 GHz) on this motherboard. Before that everyone goes to the top and say no, I read a few post image Core 2 s running on this motherboard. And if an Intel Pentium D 945 would not work, what else would be a good upgrade for my PC? Thank you.

  (Edit: Opps, I posted this in the wrong forum.)

  Computer a6403w and Napa-GL8E pages care about motherboard;

  Type of socket: 775
  Motherboard supports the following processor upgrades
  Intel Core 2 Duo (Wolfsdale) E8xxx
  Core 2 Duo E6xxx until E6850 (Conroe)
  Pentium (Conroe) E2xxx series with Dual Core E2160 technology
  Core 2 Duo E4xxx (Conroe)
  Celeron 4xx series (Conroe) until Celeron 450

  Based on this information, the Pentium D 945 only is not supported on this platform. Referring to your "multiple posts reading" on quad-core Core 2 on the Napa, the information relates mainly to non - OEM versions (read no HP) of the Board of Directors. Sumsolstice mentions the internal docs showing micocode updated but does not purely and simply that it will work. The best processor would probably be the Core 2 Duo (Wolfsdale) E8xxx series.

  Frank

• the upgrade card mother DM3-Pavilion

  Hello

  My 4 year Pavilion dm3, recently died on me. It's a little elegant machine, I wanted to wear around and who was always OK for occasional daily tasks. For these reasons and others, I would at least try to replace the defective motherboard and revive.

  The model I bought is a dm3-1003tx exotic model (bought in Thailand, especially with a keyboard QWERTY/thai), with Intel SU7300 and discrete nVidia GeForce G 105 M graphics chip.

  Given that the original motherboard is not easy to find (PN 584079-001, only a couple of bids on ebay of the Japan), can someone tell me:

  -If it's OK to replace it with an another based SU7300 of motherboard (can be with or without the nvidia chip - I really don't need it).

  -or even better upgrade to a motherboard of SP9300 based to get a performance gain? If so, should I expect any change (it looks that the consumption of energy and the frequency of the buses are higher with the SP9300 then maybe RAM...?)

  Is there any tool available around compatible HP part numbers?

  Thank you

  No, there is not a matrix of cross, useful reference because it would be. I think that HP is simply too many different models and parts for someone to keep track of it all. HP Service is inspired by replacement with the same part number so their internal service people wouldn't even have much use for such a thing, just us end users.

  Motherboards have the processor soldered to the and there is only a single part number for the fan/radiator Intel stated so I would say that if you replace your motherboard with it:

  580663 001

  with the SP9300, you'll be able to reuse your fan/radiator. In the case where you don't have it here is the repair:

  Manual

  All models use the DDR2-800 memory and accept up to 8 GB. Different motherboards all seem to have the same ports and such and will have the same anchor points. You could even theoretically install a card mother AMD-based, but this would require to reinstall an operating system, and I wouldn't trade an Intel processor for an AMD processor in any case unless AMD have been much cheaper. A Committee from AMD would also require a different radiator, however.

  You can buy the SP9300 motherboard for $45 shipped on eBay:

  http://www.eBay.com/ITM/580663-001-HP-Compaq-motherboard-Pavilion-dm3-Intel-laptop-W-SP9300-CPU-581467-0-/400445142883?PT=motherboards&hash=item5d3c63f763

  The same seller also has the SU7300 for a few dollars less:

  http://www.eBay.com/ITM/584078-001-HP-dm3-1000-laptop-motherboard-w-Intel-SU7300-1-3GHz-CPU-/400600978029?PT=motherboards&hash=item5d45add26d

  I bought a little of this seller and it looks like they have a lot of them on the spot so must have dismantled a certain dm3s. Maybe if you call them they can steer you in a way or another based on real practical experience. I confess that I have the opportunity to work on this exact model.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• M58e 7269 SFF connector card mother USB2 pinouts (PIN # s &amp; functions) ex + 5Volts = pin, etc.

  Just bought two new ThinkCentre M58e 7269-SFF.

  We need to use the internal motherboard USB2 connection to provide the connectivity (for printer POS cash drawers). It is an investigation of the pinout USB2 motherboard (functions & key numbers. USB2 connector for card mother M58e is 12 pins, with a key (unused pins). Cannot determine what PIN pin connector 1,2,3 etc and cannot find the description of USB pins on each spindle is used for (Eg. Red, Green Black Yellow and their function. Example the 5Volts pins & #, ground pine & their numbers etc.). Reflected on all knowledge databases, previous community issues and called Lenova support numbers (but failed to get a response).

  The second pattern HERE will give you the info you need.

• Dell Studio XPS 435mt does not - light light orange card mother

  I had my Studio XPS 435mt for recent years and love it! Normally I leave my machine on almost every day all day so I can access it remotely. Well, today my power went out (the product is connected to a good surge protector) and now it won't turn back on.

  When I plug it in there is a green light to the rear of the machine and internally, there is a orange light, which lights up. When I press the power button nothing happens, not even try to power on. I read a few forums that suggest all of a new power supply, a new motherboard and even a job to 'put your motherboard in the oven' random.

  So my question is can I do anything to check what the problem is? Also, if it of a motherboard problem and needs to be replaced, where is the best place to get a motherboard? Reference Dell sells to them directly or I have to go to a 3rd party to track down?

  Thank you in advance for your help!

  A type of power surge Strip does nothing to protect the PC during a power failure.  You need a 'UPS' unit to protect the PC during short power outages (most).

  As he ran, anything could have happened to the power supply to the motherboard to a component on the motherboard.

  As you have the power to 'keep' alive on the card mother, indicated by orange LED, power supply works somewhat.  Unplug the power connector 24 pins on the motherboard.  Then the rider GREEN wire to a BLACK wire and see if the power turns on (fan running).  If it does, it does not say the PSU is good (only replace it with a known good power is the only true test for a power supply), but it does not say the rotation of the problem is not in the power.  If it does not start, food is the likely problem.

  If the power supply lights the other most likely problem is the motherboard.  Reinstall (unplug and plug back in) the prior panel connector on the motherboard and then give it a try. If it still does not respond, the motherboard is suspect.  The power switch, itself, would be a very remote problem.

  Dell is a source for a replacement motherboard.  There are sites that sell Dell used/given to nine motherboards and ends up with a google search.  Only another mother of exact replacement fit and work.

  Finally, regardless of the tests do or anything that seems as it isolates a certain part, unfortunately only to replace the part really tell you if it's bad.  To avoid buying something you don't need you can make to a PC repair center renamed to what is really wrong.

• Drivers Windows 7 x 64 for the card mother Memphis-M

  Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

  Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

  I need:

  Simple communication controller PCI Chipset, USB 3.0.

  Thank you and waiting for a response.

  Hello:

  You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

  Chip set:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  USB 3:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

• Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09

  What started it stops early on with the error:
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03

  I have the option to continue with F! that works.
  I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.

  Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.

  Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
  The error indicates this device 01 because of controller 09 conflict
  Have you tested the RAM?

  Recommend doing this! You can use a tool like Memtest or similar.
  Maybe it isn't that a Ram problem and new modules could solve your problem.

• H8-1223: card mother HP Angélique Label of ports and diagram

  Put I upgraded my computer and I have a upgrade my card mother-M3970AM-Hp (Angelica2) in an Obsidain of Corsair 350 d case.  The problem is the case connectors are labeled, but aren't the ports on the motherboard.  I need to have the labels on the ports and connectors of my Board of Directors.  The case conectors are: Power SW, Pwer Led - and Power Led + and SW Reset.  I need information on the place where to connect or if these connectors at all.  I'll try to send some photos if I can understand how this Bluetooth to my cell phone.

  

  On the left is the cornerstone of HP mother.  I wanted you to see the ports that are on the map. PSWD HP LPC.  The line is the Corsair Obsidian Series 350 d connectors.  How can I connect these?  Or do I really need them?