GPBase Service2 is missing insert the disc

Similar Questions

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Whenever I have to play the game, I have to insert the disc 2 in my DVD ROM despite installing the game on my hard drive.

  Hello

  Whenever I have to play the game, I have to insert the disc 2 in my DVD ROM despite installing the game on my hard drive.
  Can someone help me with a cure for this (IE run the game without the CD?) I can run Microsoft Flight simulator without inserting the DVD in my DVD-rom.

  original title: query on Microsoft Train Simulator 2001

  I suspect that the game has Digital Rights Management in there (i.e., copy protection) and it checks for you ensure that you physically have the disc so that he knows that you are not a thief.  Many providers of game assumes that you are a thief and you prove that you're not demanding that the disc is in the DVD player when the game takes place.  What I do is to use a program like Alcohol 52%, a free program that can make a copy of a DVD/CD and include in the image copy protection so that you can use a DVD player virtual to mount the image file instead of having the real DVD mounted in a real drive.

• I HAVE INSTALLED THE AIR COMBAT SIMULATOR BUT WHEN I TRY TO RUN IT, IT SAYS INSERT DISC. WHEN I INSERT THE DISC IT USUALLY ALWAYS OPEN

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Jewels38f,

  ·         What happens once you insert the disc (you get no error message)?

  ·         What version of Combat Flight Simulator you try to play?

  ·         What version of Windows is installed on your computer?

  ·         Have you tried the game from the disc itself?

  If you use Windows 7, then follow the suggestions below.

  Visit the link given below to ensure the compatibility of the version of the game.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator

  Do not start the game that is installed on your computer, instead of this insert the disc and let the AutoPlay option to start the game and will give you the opportunity to play.

  Check if this is useful.

  If you are trying to play Combat Flight Simulator 3 you may need to install it even in compatibility mode and check if that helps.

  To install the game in compatibility mode follow the link below.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Before installing the game in compatibility mode uninstall the game. To uninstall the game, follow the link below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I reinstalled windows xp media Center 2005, I get a prompt to insert the disc of windows xp professional service pack 2 CD, I don't have it, what should I do then?

  When I reinstalled windows xp media Center 2005, I invited to insert the disc of windows xp professional service pack 2 CD, I'm not available, what do I do next? If I canceled it, I know that windows installed yet to complete the work. But I'll soon get error and windows do not work properly.

  I am frustrated with Microsoft Corp., why didn't they make things easier for users to enjoy. I noticed all the announced sounds so pleasant during installation.  Everything suddenly it asks for windows professional service pack 2 CD.  where I go to get this information from?

  Can someone help me right now, I am desperately wanted to complete this work. I left my computer hang for hours and hours. waiting for windows xp professional CD disk to copy and install.

  Thanks for your response.

  Luke

  See this link from a previous thread for advice and information.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/is-there-a-way-i-can-still-get-SP2-and-SP3-for/9b917f32-4353-4B7E-BC54-348470f7ff31

• Transfer problem - files Transfer Wizard says "Please insert the disc 1'... If I select OK it tells me the wrong disc is in the pc"

  I did a PC Restore on my Dell, I saved my files on USB 3... now it's time to download them again, the transfer Assistant tells me that "transfer is underway" and files are "fly through the window". But another window appears on the screen telling me "Please insert the disc 1'... If I select OK it tells me that the wrong disk is in the pc... it isn't." The transfer takes an age without a movement minute on the bar "load..." Any suggestions?  Kind regards.

  Did you just copied the files to USB devices or did you use some kind of backup software?

  If the latter, what is the name of the application?

  If the former can, you go to (at least one of) files on the USB key (for example, to open it)?  And what happens if you try to just copy one of the files (and use 'copy' rather than 'move' to ensure that the file on the USB device is not removed).

• Error-insert the disc when try to open the flash drive.

  Original title: why connect my USB drive as an external drive.

  When the flash drive is plugged into the USB port, it seems that it will be added as a flash drive, but then the following equipment added window indicates that an external hard drive has been added.  When I go into windows Explorer to open the drive in Explorer mode, it says to insert the disc.

  Hi JimScottATO,

  We will try this.

  First of all, make sure that you are connected under an administrator account on your computer. Then plug in your USB key.

  Click START then right click on my computer , then click MANAGE

  In the new window, click MANAGEMENT OF DISKS

  Find the name of your flash drive and right click.

  Click on the letter of change of road and railways

  And then change the drive letter to something not already taken by another drive on the computer, such as "x" or "v".

• installation of service Pack 3 updates problem, asks me to insert the disc

  during the installation of service Pack 3 updates the system asks me to insert the disc of 2002 from microsoft that I did not

  Full version update may request Office source files
  http://support.Microsoft.com/kb/840169

• Why he keep telling me that I have to insert the disc when I try to install Silverlight?

  I tried several times to install microsoft silverlight, but it always tells me that I have to insert the disc into the CD-Rom drive. I do not have the disk to Microsoft Silverlight, I try to download from Microsoft. Why he keep telling me that I need the floppy?

  Hi tntgee,

  In dealing with the problem in the installation of Microsoft Silverlight, I recommend you report yuour question in this help link.

  http://forums.Silverlight.NET/forums/

  
  Reference: Silverlight solution Center

  Hope the helps of information.

• I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  I use Windows XP and on startup, I get the message insert the disc from center of solutions?

  You have one something or other HP connected to the PC? Check the CD-ROM that
  came with it. Otherwise, contact HP support.

• drive hard printer - I inserted the disc to install the printer software, but my PC cannot read

  Installed a printer but when I inserted the disc that comes with it, my pc can not read.

  Hello

  ·         The computer will read other discs?

  Try to insert another disk and check if the problem persists.

  I suggest you run the Microsoft Fix tool of the web link that will help automatically detecting and fixing common problems below.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope the helps of information. Please post back and we do know.

• my computer does not read the Insert the disc inserted flash drive/request

  This is the first time that I had this problem. I insert the flash drive in the ubs port and the computer asks me to insert the disc. I right click on drive H and click Open and asked to insert the disk in the computer.

  Hi dpvhouse,

  1. This only happens when using the Flash Player?

  You can try to change the drive letter and check.

  a. right-click on my computer and choose Manage

  b. click on disk management

  c. right-click on your USB key and select 'change drive letter and paths '.

  d. reinsert the flash drive to the computer and see if it works

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Invites to insert the disc in the drive when you try to copy photos on CD - R or DVD + R

  COPY OF PHOTOGRAPHERS SENT BY E-MAIL ON A CD - R OR DVD + R

  I'm trying to copy photos that have been sent by e-mail to me on a drive.  What is the right way to do this?  When I think close to execution of this task, I got my disc is ejected and it tells me to insert the disc in the drive?  What I am doing wrong?

  I'm trying to copy photos that have been sent by e-mail to me on a drive.  What is the right way to do this?  When I think close to execution of this task, I got my disc is ejected and it tells me to insert the disc in the drive?  What I am doing wrong?

  ===========================================
  If you copied (recorded) the photos in a folder on your hard drive?

  The following article is maybe worth a visit:

  Windows Vista-
  Burn pictures or videos to a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-pictures-or-videos-to-a-CD-or-DVD

  If this does not work... the following link may be worth a visit:

  Windows Vista Solution Center
  http://support.Microsoft.com/ph/11732#TAB0
  (scroll to the bottom and select: "your CD or DVD drive cannot read or write media")

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Insert the disc. It is already!

  I try to install PS CS5 on my computer. I have a prompt telling me to insert the disc. It is already inserted. This isn't a copy downloaded but bought copy with cd. Help!

  Try to install from a download link, and then confirm with the serial number of your drive. See the link below:

  Download Adobe Creative Suite 5 products