my computer does not read the Insert the disc inserted flash drive/request

Similar Questions

• computer does not read the disc

  my computer used to read any disk and was able to burn CDs now it reads only DVDs. How can I fix

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

  I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Computer does not recognize the disc in the cd drive.

  original title: media player 11 does not recognize the disc in the cd drive.

  Media Player 11

  I use Windows XP oper. system, my windows player works fine execpt when I place a cd in the drawer of rip to rip to my library WMP does not recognize that there is a disc in the drawer of thr. The problem started after I installed a vinal record of pc system, but he has always recognized that the disc was in rip drawer, if I put the disc in the drawer and WMP has closed and reopened. then it started to not recognize that a disk was in the drawer, even if I closed and reopened WMP with the disc in the drawer. Any solution to this problem would be greatly appericated. Thanks George

  Hello

  Remove the filter upper and lower filter and see if it helps.

  r: clickStartand then click run

  b:   In theOpen box, type regedit, and then click OK

  c:   In the navigation pane, find and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  d: in the right pane, clickUpperFilters.

  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. ClickUpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step g.

  e: in theEdit menu, click delete.

  f: when you are prompted to confirm the removal, clickYes

  g:    In the right pane, clickLowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section"next steps"to learn how you can find more solutions or more help on the Microsoft Web site.

  h: in theEdit menu, click delete.

  i: when you are prompted to confirm the removal, clickYes

  j:    Exit Registry Editor.

  KC: restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  Hope this information helps.

• Computer does not recognize the discs when inserted in my D: and E: drives.

  Original title: DISK DRIVES D AND E . Do NOT WORK

  When I insert a blank disc in my drives .He is not found by my computer.could would it be a disc that I need to update? or is their another way I can get it going again until a few weeks ago running good, I ultimate.32 bit .is their a scan from windows vista I can do to find what reader needs to update it please help.

  Hello

  It is not unusual for the same problem have an impact on both drives, in fact, is planned.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• MY CD/DVD DRIVE DOES NOT READ THE DISC READABLE

  MY CD/DVD DRIVE DOES NOT READ ANY READABLE DISK ALL OF A SUDDEN.

  I DON'T KNOW WHAT IT IS.

  I CAN HEAR THE COMPUTER TRYING TO READ BUT IT ME SAID JUST THAT HE HAS NO DISC INSERTED OR THAT THE DISC IS BLANK WHEN ITS CLEARLY NOT.

  IT would NOT be RETURNING to PLAY AUDIO CD IN iTUNES or WINDOWS MEDIA PLAYER.

  HELP PLZ

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Computer does not read the CD

  It's a new compuyer yet noy reads CDs

  Hello

  You have a third installed on your computer a CD/DVD burning software?

  Are you able to see the drive in Windows Explorer?

  Here are some steps you can try to resolve your problem.

  Method 1:

  Try reinstalling the drivers from CD/DVD, follow the procedure described here below.

  Click Start > right click on computer > Manage > Device Manager > expand CD/DVD drive > right click on the option below and click on uninstall. Now, restart the computer to install drivers from CD/DVD driver Windows cache.

  Method 2:

  Try to run the automated tool included in the link below.

  The problems of the CDs or DVDs

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-CDs-or-DVDs

  Let us know if this helps

  Concerning
  Anthony.

• Printer Spooler not enabled: my printer does not print and my computer does not load the disc from the printer

  When I try to print a document, I get an error message saying my printer spooler is not active or currently running.  When I search my printer on the computer, it went, so I tried to charge it and it wouldn't let me install the printer.  Can you help me please?  Thank you.

  Hello

  1. what happens when you try to reinstall the printer?
  2. do you receive any error messages?
  3. What is the brand and model of your printer?

  Please provide us with some information so that we can help you solve the problem.

  You can consult these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• my computer does not recognize the WD external hard drive

  I use WD My Book external hard drive in my laptop (Vista) DELL for extra storage space. But all of a sudden I don't see in my computer!

  When I looked at , , info., (in addition to the "OS" & "Recovery") I saw "'unknown disc', so I tried see its properties by right-clicking, then I saw"WD My Book external hard drive"name in it and she said"working properly "; but when I played with it, I must have done something wrong, this name of 'unknown disc' missing from the list in my computer. How can I make my WD get work again?

  Hello

  Thank you for posting.

  I suggest you to contact the manufacturer of the device. They should be able to help you.

  Check out the link

  http://support.wdc.com/?wdc_lang=en

• My laptop does not read the dvd, but another laptop computer bed. PL advise solution. Thank you

  My laptop is Pressario V2000. My laptop does not read the dvd, but another laptop reads the same dvd. PL is the solution. Thank you

  Try another DVD to verify that your laptop can read at least the other DVD.  If he can't play other DVD's then you need to replace the DVD - CD ROM drive supplied with your Pressario.

  Another thing you can try is to check fingerprints or scratches on the DVD, some DVD players are more sensitive than others.

  J W Stuart: http://www.pagestart.com

• the computer does not recognize the printer memory card reader. HP photosmart 7660 printer

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  The computer does not recognize the memory card from camera. The printer recognizes the memory card. So I can't transfer photos unless the camera is connected via USB. The printer is HP Photosmart 7660. Any suggestions?  Driver has been updated ' 09 and MS says I have the latest version of the driver.

  Ron

  Microsoft did not your hardware - done HP.

  All support for it - regardless of your operating system - is the manufacturer of the equipment.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=305364&LC=en&cc=us&DLC=en&lang=en&cc=us

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• Intel HD graphics driver installation error: "computer does not meet the minimum requirements.

  Hello

  I tried to update the Intel graphics driver in my notebook using sp55098.exe , but the system returned the following error:

  "This computer does not have the minimum requirements for installing the software.

  I have the following: dv6-6b05tx laptop computer running windows 7 pro 64

  It's the device I am trying to update:

  Intel HD Graphics Family
  Current driver date: May 7, 2011
  Current version of the driver: 8.830.6.3000

  I tried the drivers on the Intel site, but they do not work either.

  Help, please.

  Thank you very much.

  PS

  I managed to update the drivers of AMD Radeon HD 6700M using this link of guru3d.com.

  But I can't find a similar solution for the Intel card.

  Hello:

  Please read the notes on the AMD driver file...

  Description:

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  The Intel driver is only for the models with only the Intel UMA graphics adapter.

  You must live with what version of the video, Intel is in the AMD driver package.

  Paul

• CD player does not read the CD

  Original title: Windows Installer 4.5 on a computer laptop gateway running windows7

  I tried several things with windows install 4.5. I even tried sfc/scannow, and who came back under the name of no violation. The only thing I have not tried is the clean utility windows, that will help? Who's going to make me lose all my photos and music and information stored in the school's computer? The reason why I am trying to solve this problem is because the Player reads any of my software cd HP, Polaroid and Microsoft2010?  someone please advise

  Hi fredibar,

  1 are. What utilities you referring?
  2. what exactly is the problem with Windows install?

  As the CD/DVD drive does not read the CD, we need troubleshoot CD player. We do not think that Windows Installer is related to the CD player.

  To fix the CD/DVD read the issue, try the following steps:
  a. see your CD or DVD drive cannot read or write media
  b. click Run Now button and run the tool successfully.
  c. restart the computer and check if the CD is read by the CD/DVD drive.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer does not stop the on-screen keyboard. It is whenever I log on my profile and will not stop. How do I stop?

  computer does not stop the on-screen keyboard.

  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  Read the tutorial above.

  You can prevent the Visual keyboard facilitated access to automatically
  When you load Windows by disabling "use on-screen Keyboard.
  checkbox on the page "Use the computer without a mouse or keyboard" in the
  Ease of access Center.

  Open Control Panel > accessibility > Ease of Access Center > use the computer without a mouse or keyboard.

  See you soon.

  Mick Murphy - Microsoft partner