GPIB Guide and samples

Similar Questions

• GPIB read and write commands of Agilent 54642 oscilloscope

  Dear friends,

  I would like to acquire a waveform of Agilent 54642 ocsilloscope in the LabView 7.1 via GPIB program. Can anyone mention the GPIB read and write commands for the oscilloscope even?

  Furthermore, on the subject of the LabView program, is it fair to place blocks to write two GPIB followed by a single GPIB read block (everything series), as well as an indicator, in order to check the waveform in LabView?

  Kindly help me with your answers...

  Look forward to y...

  Thank you very much in advance...

  Marion

  Download the 7.0 driver that Albert gave the link to, make sure that you have installed NI-VISA and run the getting started sample which is part of the pilot. If it does not, please elaborate on the error codes that are reported.

• Satellite C850 - Office has only users guide and trash

  Hello.

  Problems with my Satellite C850 - 02D00m. broken the screen and using an external monitor. Now a few minutes after the robbery he on it blocks the normal desktop with only a guide and an icon that recycle bin shows. Before crashing, I tried to do a restore system without success and of course cannot locate the recovery discs I did when it was new.

  Despite trying I can't open the guide of the user using mouse pad or keys.

  Any ideas? Please, I beg you!

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
  You will find instructions on the repair and recovery of Windows 8.

  Try running HDD recovery image installation and portable test with the factory settings.
  Please post comments.

• Reading and samples the sampling frequency using a fast external clock

  Hello

  I use an NI USB-6212 box to launch a search engine for combustion. I have a pressure sensor in the head and a wheel on the crankshaft. I use the beats A Quad channel of the rotary encoder as a sample external to the pressure with the sample clock. The idea is that I want almost the same number of points in each trace of pressure so that it is easy to average together. I seem to be able to do this at low speed, but I'm having issues at high speed.

  Can someone tell me what I should have my sampling rate and samples to read together and how it effects my sampling when using an external clock? Samples per channel will affect the size of buffer and that matters? When I was high (10-100 kHz and about 1/10 * rate for samples to read) it barely read but as I put the lowest and lowest he read faster. Play with the settings a bit seem to affect how well it samples at different speeds. The engine is running at 3600 rpm and my encoder puts out 2500 pulses per turn on one channel, I'm looking at a frequency of 150 kHz effective sampling. However I didn't sample program with the engine operating at full throttle. I hung on the output of the encoder up to a scope and reads very well.

  Are there opportunities the filter counter that I see in the manual of 621 x is enabled inadvertently?

  Thank you

  Xander

  Xander18,

  I suggest you move your screws initialization outside the while loop, as well as your narrow DAQmx VI.  On my side, it looks like a new task is performed for each loop, which takes time.  That a try and let me know how it goes.

• Relationship between the samples through the second rate and sampling

  I was wondering if someone could clarify the relationship between the samples through second rate and sampling.

  I have USB6008 and USB6363 of the tips that I work with in Measurement Studio.

  For the nec USB6008 entry differential (up to four channels of HAVE), if I put a sampling frequency to 8192 samples per second, and I updated 2048 samples per channel with:

  Task.Timing.ConfigureSampleClock ("", 8192, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples, 2048)

  Am I right in assuming that:

  • through the 4 analog inputs 8192 samples will be collected every second
  • 2048 samples will be taken by way of analog input for each scan
  • The time between two successive data points is 1/2048 seconds (about 0.5 ms)

  Hi DKIMZEY,

  The help page for the "Timing.ConfigureSampleClock method" should have a hypertext link to the page "Sample clock" in NOR-DAQmx help, that contains this text: "this sample clock sets the interval of time between samples. Each tick of the clock starts the acquisition or the generation of one sample per channel. "When the sample clock frequency is 8192, then the time between two successive data for a single channel is 1/8192 seconds. The time between the data points on two adjacent channels is controlled by the clock to convert, which can be controlled independently on most devices (up to a point).

  Brad

• I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the names of species (bold italic)

  Hello

  I'd appreciate any help I can get.  I have a LOT of different Indesign CS6 documents that are field guides, and I would be able to export only the species names (in bold italics) of documents so that I can put in excellent to make a comparison and produce a comprehensive list.  There are several areas of text for each page/species.  The species name is in a single text box, so it is possible to somehow only the bold italics to export a document?  I have a bad feeling, but I thought I'd ask anyway. Thanks in advance for your time and interest.

  Maggie

  Also, sorry if my original question has not obtained the Chief... I'm new to this forum.

  It would certainly be a job for a written custom script. Without scripts, I might consider using the Index feature in InDesign. Indexing is manual work very well.

• Can break some intersections Guide and not others

  In Illustrator CC 2015, I run the questions where I can snap to intersections Guide (90 degrees, a vertical guide and a horizontal guide) but not others. The two intersections are on a single vertical line. I have unlocked all the guides, and brought them all to the front layer (just in case where what matters) and still nothing. When I select the pen tool and hover on the intersection A, the pointer snaps to the intersection, the indicator displays "intersect". When I select the pen tool and hover on the intersection of B, the cursor follows the horizontal Guide, but as soon as I get near the intersection, it stops after the guide, as if the intersection is pushing the snap.

  Is this a problem of layers? If I move the vertical line (not the Guide) at the intersection of B away, I can line up the intersection to Guide very well. All Guides are arranged for the 'front' (right-click > reorganize > bring to front). The cursor does not follow the vertical Guide at the intersection B at all for some reason any. I'm baffled that I can't get the reliable behavior in identical situations, and I can't find a way to fix and more to remove the vertical line, which should play second fiddle to the Guide!

  My preferences are:

  Selection and display of the anchor:

  Tolerance: 3 px

  Checked the selection of object by trace only

  Snap to Point: 8 px

  Checked the Ctrl-click to select objects behind

  Guides:

  All boxes checked except for measurement labels

  Alignment of tolerance: 4 pt

  You have any 3rd party utility or a Tablet?

  My Mac cc2015 is good to work and get the intersect, even with your settings. Your settings are customized, I recommend you to reset your preferences.

• Guides and preference of grid does not properly in Illustrator CC 2015?

  I have my preferences set for the guides show as dots, but they show only that the solid lines. I can change the color in the preferences, so I know they work at least a little, but all the old files that I opened, and dragging new guides guides does appear as solid lines, even if the preference is marked by dotted lines. Everyone knows this, of course, quite minor problem?

  Solution:

  Turn off the power GPU Performance in preferences. Guides (and other things) suddenly work as expected.

  Wait for the patches of Adobe Illustrator and try again.

• I don't have the people and the Media tabs to allow me to import pictures from my iPhotos, I don't have the elive, quick, guided, and expert tabs, can anyone help please?

  Hello

  Im having problems with my iPhotos import, I just bought photoshop elements 13 and mac book at the same time and I'm a bit of a learning curve, I noticed that on all the tutorials, there were people and Media tabs which I don't see, all I see is elive, Quick, guided and Expert, can anyone please help?

  Thanks in advance

  Nicol

  Elements consists of two separate but closely linked programs: the editor, where you work on your photos, and the Organizer, allowing you to organize them. You are looking in the editor. The Organizer, click the Organizer button in the start screen or at the bottom of the editor.

  Now, you want to keep your photos in iphoto or organizer? It's a choice you need to do, sooner or later. The Organizer includes an EEG of photos by > command iphoto, but who's going to copy all the photos in your iphoto library to a new location and organizing data bases do for copies. Is that what you want to do, or want to you use iphoto to organize your photos, in which case you would not use the PSE Organizer?

• Need help to create a workspace to keep my guides and leaders to a predefined dimension.

  Need help to create a workspace to keep my guides and leaders to a predefined dimension?

  Might be interesting to set up an action to do this.

  The next time that you create your folder of the workspace, an action, then you have this will define and at a click of a button you will have the same workspace each time.

• Productivity of FMS and sample downloads broken tools?

  I could be a huge jerk, but I really need the Adobe F4V post processor for the work I do in the FMS 4.5. It seems that downloads of tools are not available on: http://www.adobe.com/products/adobe-media-server-family/tool-downloads.html

  The only thing that can be downloaded is the Adobe Access for Apple iOS library.

  Anyone know if it's on purpose?  Am I just dumb?  In the FMS 4.5 tools directory there is no F4V post-processor. Anyone know where I can get productivity tools real FMS and sample downloads?

  We look at the issue.

• Difference between the implementation guide and the user guide.

  Hi all
  
  I'm a fresh graduate, I wanted to just know what is the difference between the implementation guide and the user guide.
  
  Sorry, the question may seem simple, but I'm not aware of the merry.
  
  Kind regards

  Hello

  The implementation guide is the reference that you can use to make functional configuration so that the user guide covers how the module/application navigation and tells you how to use it.

  Thank you
  Hussein

• Margin guides and transfer page on in my pdf.

  I hope someone can help me with what I have in many years, never had this problem.

  I am running CS4 with Windows XP.

  My problem is when I edit an indesign page, and you want to export to a PDF the margins and guides page

  (which until now were still absent from the PDF) now show. Is there a setting in Indesign that

  in some way and even more important is there a way to turn it off.

  Any help would certainly be appreciated.

  Thank you.

  Terry

  In the Export PDF dialog box, uncheck the box "include Visible Guides and Baseline grids.

• Use an encoder to establish and sampling in discrete time

  I can't really control what DAQmx subs to use and how to configure. It should be a simple task, but not for a beginner like me. WARNING: I spent hours reading the help files, knowledge base articles and research forum and there is nothing in them that makes sense to me. Details of the operation are in the diag of block. Please take a look and see if you can guide me. THX.

  BTW... Using panels of MAX test I checked the wiring, operation and configuration of my sensors. With the attached vi, pgm does not signal departure but initiated each time the first 'A' pulse arrives. This checked because the encoder can measure data without ever passing the pulse "Z".

  Thanks Mike. I got this example and it is one that I had already downloaded. It does not work. After the start pulse, it reads all the samples in the sample clock frequency, not on the edges of the reference trigger pulses. The example is wrong. So I did what I normally use in these cases... wandering banging my head against the wall until something gives.

  Solution. Set the example of wiring in the source of reference trigger control in the source of the input clock as well as in the relaxation of reference under vi (this thread already exists). He now works as it is supposed to. Hard learning of examples when the examples are wrong. Here is the solution where all els tries to emulate this example.

• Render form Guide and submit form Guide

  Hai all,

  Could someone tell me where can I find the properties or the explanation for services rendered form Guide & form Guide to submit in the samples-forms category, in Workbench ES?

  Thank you

  Aswani.

  I don't really know much about the samples. They are not documented in the Workbench help because they are not part of the Workbench ES product.

  If you're the form guide appear in Workspace ES, use make it form Guide ES Update 1 and submit form Guide ES Update 1 and follow the instructions in the quick start to http://livedocs.adobe.com/livecycle/8.2/wb_help/000462.html.

  For my curiosity, if there is a reason you want to use these services I would be interested to understand.

  Thank you

  Scott