GPIB-USB-HS driver problem

Similar Questions

• USB Flash drive problems

  I have a USB key that does not work. It's a drive 8 GB flash USB 3.0 which has been formatted and works on my Macbook Pro. The problem comes when I try to use it on a Windows device.

  When I format it under OSX Extended it appears under Windows but is empty.

  When I format it in FAT, under Windows it says that the device must be formatted first

  Either way, when I go to format the device on Windows it says that is only 200 MB space

  Any help would be appreciated.

  If you want to use a USB flash drive on the cross-platform (Win, Linux, OSX) computers you have the next chance:

  -MS-DOS (FAT) format:

  

  If you want to start the drive on a PC or use it with older versions of Windows, you may also need to set the partition to the Master Boot Record (MBR) for full compatibility Windows scheme:

  • Click the drive, and then select the tab "partition".
  • In the "Layout of the score" dropdown, select "1 Partition".
  • Click on 'Options' and choose "Master Boot Record" as the type of partition, then click 'OK' and 'apply '.

  Format discs very quickly, although the total time required will depend on the size of the drive.

  The file system resulting is compatible with all versions of Mac OS X, Windows 95, 98, Windows XP, Vista, 7, Windows 8, Windows 10, is one of the most widely recognized and usable file system formats. What makes FAT ideal of the file system to use for external hard drives or USB flash drives that are designed for use in environments with multiple operating systems.

  ATTENTION! The main drawback to the use of FAT32 is the file size limit, which limits the files on the drive to be 4 GB in size or less. If you need single files to be larger than 4 GB, use exFAT, even if you lose compatibility with older versions of OS X and Windows.

  -Format in NTFS and use a program like Paragon NTFS on your Mac ($ 15/20).

• ScanDisk USB Flash Drive problem after upgrade to El Capitan

  After the upgrade to El Capitan, I can't access the vault secure on my USB Cruzer facet flash drive. I have Plug and display files as usual but when I try to open the safe, I get the message ' Scan Disk Secure Access V 2.0 requires San Disk USB Flash Drive. Please insert one. »

  The Flash Player has worked fine before the upgrade to El Capitan and I can still use the files outside of the secure vault but, basically, I cannot now access the secure vault. I'd appreciate any thoughts on how this can be resolved. I only am not an expert so please, keep it pretty simple.

  Sounds like a problem of compatibility with the Secure Access software and the OS X El Capitan of SanDisk.  Try download and install the latest version of Secure Access of SanDisk.

  It seems also be other users having the same problem, you may get better assistance with this through SanDisk.  Someone else said that upgrading to the latest version of Secure Access has solved the problem.

  http://forums.SanDisk.com/T5/SanDisk-SecureAccess-2-0/SecureAccess-2-0-and-El-CA Dube/td-p/347378

• Attempt to connect Smart Rugby at DoubleTwist, USB device driver problem

  Original title - mobile phone android

  Try to connect my Smart Rugby to DoubleTwist. USB MTP device has a driver problem. What can I do?

  Hello

  Check with the manufacturer of phone or your support telephone company if they were provided with the phone.

  Rob - SpiritX

• USB Port driver problems

  Windows XP Professional will not recognize my key USB flash drive in the USB ports before; However, it does not recognize the flash drive in the back USB ports of the Tower pc which is very annoying. How can I get the drive J it is called on the front USB port of the tower to recognize my flash drive? I want so that it can detect the flash drive as soon as I insert it into the front USB port. In addition, the front USB does not detect my Ipod USB port or USB digital camera.

  Sometimes the front USB ports are not yet connected, so it's good to open the suitcase and check. Sometimes these ports on the motherboard just died, especially if the computer is old.

  Have the ports before does not work, is a very common problem that can have various reasons:

  http://www.Google.com/#hl=en&source=HP&q=front+USB+ports+not+working&AQ=0&AQI=G10&OQ=front+USB+por&FP=be5ffa94030d2d34

  Unfortunately, it will be difficult for someone who is not practical with the computer to help effectively. It's strictly a hardware problem and nothing to do with Windows.

  A good solution is to buy a USB hub (I prefer those motorized), attach it to a rear USB port, but do it right from the start where it provides additional ports are easily accessible. USB hubs are not terribly expensive, around $ 25-30 for a motor home. MS - MVP - Elephant Boy computers - don't panic!

• USB Flash drive problem

  My USB FLash drive is a Transcend JF V30 4 GB, the problem is when I connect it, it shows the safe removal icon in the system tray, but don't show as a removable disk in "Cpmputer. I've included a screenshot.
  

  If the screenshot isn't visible, click here

  It is probably a case of unassigned drive (USB key).

  1. right click on my computer icon

  2. click on manage.

  3. go in "Disk management" / removable devices and assign a drive letter it manually.

  4. right click on the drive without letter & click on "change drive letter and paths...". »

  5. click on 'change '.

  6 assign an alphabet.

  7. click on OK.

  There should be an unassigned drive exists in the disk management table. I'm so sure because your USB 'plug & play' detects the drive & drive (Hardware) is also correct on the other machine.

  S.Chatterjee

• Configuration of USB 2 external 500 GB USB hard drive problems

  Hello gentlemen.

  I recently acquired a disk hard external 500 GB USB part number PX1269E - 1 50.
  I have some problems with the configuration of USB 2.0 in windows XP. When I connect it to a usb 2.0 port, I get the message "USB HDD high speed plugged into a hub non-hi-speed usb", and the unit remains low-speed (12 Mbps) USB. (I checked the port with an another usb 2.0 device and the port works correctly in usb 2.0 mode).
  I checked the PXI1269E - 1 50 in other PCs and I have same results. I can't make it work in USB 2.0 mode. I also have some problems with the virtual CD that is always present when you insert and mount partition. There is a way to remove it?

  I only use the hard drive for data backup every day, and I don't want to use any other drive letters in my system.

  The main PC is an ASUS P4P800-E deluxe with windows XP SP2 fully implemented to update and build in the USB 2.0 controller intel.

  Best regards

  DA P

  I have connected the 500 GB HDD (PX1269E - 1 50) to my Satellite M40 and it works fine. It works with USB 2.0.
  Guys, I think there is something wrong with the controller software or the registry is damaged. Maybe an update is necessary.

  PS: I have not installed the additional software on the supplied CD. The operating system automatically acknowledged.

  @parabolix: using SP1. Try to install whole MS and SP2 updates.

• Removable USB Flash drive problem

  When I try to copy the document on USB removable Flash disk, then suddenly a display showing: failed to copy... (name of the file). Failed to create the directory or file.

  I'll aprecite your help.

  Looks like you are trying to copy a folder in a location that is marked as a system file.  Try to make a folder inside your "My Documents" folder, and then copy into that.  If this does not work, please indicate the details of what you are trying to copy and where you try to copy in.

  I hope this helps.  Good luck.

• 8.0.2 - > 8.1.0 vmware tools (win64) usb FTDI driver problem

  I'm Win10x64 running on latest El Capitan.  When I upgraded from fusion 8.0.2 to 8.1.0, I could no longer communicate with all FTDI device that I plugged in USB.  There are some devices that I have with FTDI chips create COM serial ports (debugger microcontroller pods, etc.).

  To go back, I uninstalled vmware tools and downgraded fusion to 8.0.2 and reinstalled the previous vmware tools and everything works well.  Something seems to have changed in 8.1.0 that breaks it.

  Yes, it is a known issue in the merger 8.1 and should be fixed in the next version of the patch. In the meantime, version 8.0.2.

• Driver XP GPIB-USB-A has not installed with NI488 - 2.8.1

  I have the DVD driver for August 2011, and I installed NI488 - 2.8.1, which should have the GPIB-USB-A driver in it. I plug it in, and Windows cannot find the driver for it. Is there a specific folder, I do so he could find the driver?

  According to the readme, it is not supposed to be the - one support and has not been supported since version 2.2.

• GPIB-usb-hs on vmware fusion

  I am running Windows 7 64-bit on an iMac with OS X 10.6.5 via VMWare Fusion. I installed the driver NOR-488. 2, but can not see my GPIB-USB-HS device. This post: http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/NI-488-2-does-work-on-Windows-XP-Mode-within-... seems to indicate that someone else has had success; his problem was using XP Mode.

  Anyone can shed some light on this? Can I expect the combination of the GPIB-USB-HS with Windows 7-64 on VMWare Fusion on an iMac to work?

  I also have a USB-6215 is working well.

  Thank you!

  John-

  I moved my virtual machine to an OS X 10.6.6 system and things did not work immediately. The GPIB-USB-HS was not visible to the MAX and in Device Manager it looks good, when when I open the property page, he says that there is no driver loaded.

  I was able to get the GPIB-USB-HS working by choosing to update the driver through the Device Manager. The steps to do this are:

  1. right click on the GPIB-USB-HS in Device Manager and select "update driver software...". »

  2. Select "Browse my computer for driver software" and then "Let me pick from a list of drivers for devices on my computer.

  3. you must be exactly a GPIB-USB-HS driver to choose. Select it and click Next.

  4. once it finished, view the properties of the device and make you it is said "this device is working properly."

  I did the same test for validating a single request with the device, but it seems to work.

  Let us know if this helps,

  Jason S.

• Windows 7 USB Flash drive - if I click on Scan and difficulty after you insert the disk, it erases my files

  Original title: Windows 7 USB/Flash drive problems

  In Windows 7, if I plug in my USB drive, the message box appears titled ' do you want to scan and difficulty of removable disk (e :))?»  If I click on Scan and Fix, he deletes my files (or so I thought).  I hope that the files are still there and I have simply can't see because the drive is FAT32 and not NTFS (it says that most of the drive is NOT of free space, so I assume that the files are still there).  What should I do to see / access files?

  Note: A reader, I never selected "Scan and repair"... so I can still see/access files.
  On the other drive, however, the first time I plugged it on Windows 7, I clicked Scan and Fix and it erased all the files on this drive (I guess).  This of course got me very angry.

  Hi MichaelGramm,

  It seems that the file format has been corrupted. You might consider formatting the drive in NTFS file system and check if this solves the problem. For Windows 7, the best choice for hard disks is NTFS.

  Note: Make sure that you back up the data before formatting the disk.

  See these articles for more information on formatting disks and flash player:

  Create and format a hard disk partition

  http://Windows.Microsoft.com/en-us/Windows7/create-and-format-a-hard-disk-partition

   

  Formatting disks and drives: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

   

  Caution:

  Formatting erases all existing files on a flash drive. If you format a flash disk that has files on it, the files will be deleted.

  Hope this information helps.

• Error of Driver GPIB-USB-HS - 10 possibly after Feb Windows Update Windows

  Starting from 17/02/2016, GPIB-USB-HS material (2) is no longer connecting on 10 of Windows using NI488.2 Rev 15 15/8 with the 15.0.1 patch.

  Using VMWare player 7.1.3, the VM sees the material, connects, turn lights and then turn off. The virtual machine shows "Driver error" unable to connect to the USB device. This has been tested with two USB devices that have worked with the same setup for a few years now on Windows 7, 8, 8.1 and 10 using VMate 7.x and 12. xs

  Possibly this is related to the last update of Windows,

  Repair, or a full installation of rev 15 NI488.2 solves this problem.

  VISA still works via TCP/IP.

  Any thoughts will be greatly appreciated.

  Update: the pilot is still alive.

  The latest version of Windows, which has been applied to the host system 05/03/2016, restores the driver under the guest virtual machine feature. Revisions to operating system host and client are now at 10586.122.

• Agilent 82357 B GPIB/USB, problem with distributed applications

  Hello everyone,

  I am developing software that communicates with an instrument, with USB, RS232, Ethernet and GPIB interface

  On my development PC, I can communicate with my instrument using a 82357 B Agilent GPIB - USB converter, without any problem. (and other interfaces as weel)

  I have deployed the application using the Installer application on the target computer Builder. The application works with USB, RS232 and Ethernet interfaces, but I don't see the GPIB interface in the control of VISA resource name.

  I followed the advice given by OR when you use a converter USB GPIB of Agilent (Tulip active...)

  I did the following tests on the target computer:

  -J' installed MAX, and I can communicate with the VISA test panel using the GPIB-USB converter.

  -J' made a small application with the VISA resource find included

  -If I unplugged the converter USB/GPIB instrument, the VISA to find the function return resource: GPIB0::INTFC, COM3, COM4, LPT1 COM7

  -If I plug the converter to the instrument, the function of resource VISA finds return nothing.

  -If I run the interactive command of VISA, I got the following error:

  Cannot find the resource by using expression? " »

  error: BFFF003A

  Name of the State VI_ERROR_INV_SETUP

  I'm using LabView 8.5 under windows XP.

  I have included in the installer

  -Run LabView 8.5

  -VISA 4.4 duration

  The target computer is running Vista.

  Thanks for your help and your support.

  Hello everyone,

  For your information, I have solved the problem in desinstalling then reinstalling my installation software on the target computer.

  I still don't know where the problem was, but it's working now. (even with the version of the driver 15.0 agilent)

  Thanks anyway for your help.

• The conclusion for M - Audio MobilePre USB driver problem

  The conclusion for M - Audio MobilePre USB driver problem

  Use: iMac

  OS: El Capitan 1011.2

  The latest driver I could find was 1.8.1.

  Error message:

  Installation failed - Setup could not install the software because there was no

  available software

  I would use this hardware with Final Cut ProX 10.2.2 and Garageband 10.1.0.1

  A quick search seems to indicate the latest version of the driver to be 1.2.1 - there was no 1.8.1 I could find. It has been out for more than a year, so no mention of El Capitan, but it could work. I'll make sure that you have the right to download and try again.