GPS module Adafruit - fail to access by id UART 40 in Java ME 8.2, but same code works in ME 8.1

Similar Questions

• Pavillion 500-368na: ERROR of UEFI: verification failed (15) access denied

  Since today when I start or restart my PC, I immediately get a blue screen that says:

  Verification failed: (15) access denied

  I press return to enter 'OK' and get another blue screen called "Shim UEFI key management.

  I gives me 3 options: continue start; Register the disk key; Enter the hash of the disc

  If I select Register hash/key I have a long list - I tried selecting some of them, but the key is not found [message: only the encoded DER certificate (*.cer/der/crt) is supported].

  If I select continue starting I boot directly into Windows 8.1 (64-bit) despite my system dual-boot with a Linux distribution (and work with Linux and Windows perfectly until today). Every time I have start or restart, I have to go through this same sequence and can only start Windows.

  Info additional possiblly important:

  (1) I was prompted to upgrade to Windows 10 but have not yet done yet - I "hide" the 8.1-> upgrade option 10.

  (2) yesterday (i.e. just before this problem appeared) the HP Support Assistant "HP PC Hardware Diagnostics UEFI" updated version 5.8.2.0

  At any expert UEFI tips to overcome this problem of access denied or tell me how to register the key that seems to be lost for some reason?

  Thank you very much.

  Hello

  Looks like you have a GRUB that there is little support on this forum to deliver.  You could try the Linux forum.

• HP EliteBook 840 G1: GPS Module - find cell phone lost / stolen eventually

  Greetings.

  One of our new cell phones seems to be missing and we cannot find it within the company.

  Either this is move - or in the worst case scenario, stolen.

  As these laptops has a GPS module, can we track down with the help of HP?

  No third-party tools when installed from our part for this.

  Best regards

  Paul.

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Answer to your question is 'NO' as we cannot follow the specifications

  What you can try to:

  1. call HP Technical Support and report this problem

  2. get a case for your conversation with the representative number immediately

  3. Please find the reception of your laptop, scan a copy of it and send you a copy of it in your Inbox

  4. Please contact the nearest Police station and make a complaint about your laptop is stolen

  5. delivery of the hard copy of the invoice of your laptop the cops

  6. keep in touch with cops and tracking to get an update as and when you need

  Note: HP is not responsible for any loss of data or information on your laptop because there is no way to track your

  Laptop

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• Access violation at address 0e42128d in module AVSFLVFile3.dll. Access reading 0000000 C

  How to fix a breach of access to the address 0e42128d in the module AVSFLVFile3.dll. Access reading 0000000 C

  Hello

  Welcome to the community forums of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  1. Once you get this error?

  2. are you aware of changes to the computer before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 3 in the article by putting your computer to normal startup.

  Method 2:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• GPS module question

  I am interested in the mini notebooks with GPS module - I would use the netbook instead of my current GPS (one less thing to carry on a trip), but there is limited info on exactly what this integrated module GPS can/cannot do.

  First, HP Navigator software, it's a service to purchase a monthly subscription to?   I found this on the HP website: "the Navigation is free for a trial period of 30 days and requires paid activation after the trial" what?

  Secondly, this navigator software provide the voice directions 'synthesis' or provide audio or is it simply Visual?

  Thanks for all those who respond

  McHP,

  Navigation in the browser of HP is free for a trial period of 30 days and requires paid activation after the trial. I am not sure the speech synthesis.   Marketing of information is here:

  http://h71036.WWW7.HP.com/HHO/us/en/pclc/articles/navigation-mapping-software.html

  The GPS module will be working with other navigation software.

  -wes

• Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there an access

  Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there access to the 4.1 just uninstall and fresh install 4.4 from the site?  Is the problem 4.1 and 4.4 no longer supported?

  You can download LR 4.4.1 including the latest update here:

  https://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Uninstall the current version of LR, you have it installed, download LR 4.4.1 installer and install it. I don't know what causes your problem with the update, but that a full installer for 4.4.1 can operate without any problems.

• Relink the module 'FEMCCE' failed when trying to install the Patch 17040891

  Reissue of links module "FEMCCE" product fem...

  do /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE /u02/oracle/DEVE/apps/apps_st/appl/admin/DEVE/out/link_fem_31349.mk f

  From the MEF executable link 'FEMCCE' Thu Oct 24 16:44:07 CDT 2013
  g ++-m32 '--L/u02/oracle/DEVE/apps/tech_st/10.1.2/lib-L/u02/oracle/DEVE/apps/tech_st/10.1.2/lib/stubs - lclntsh o /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE of the L/u02/oracle/DEVE/apps/apps_st/appl/sht/12.0.0/lib/stubs.
  /U02/Oracle/deve/apps/apps_st/appl/FEM/12.0.0/lib/ccemain.o.------
  /U02/Oracle/deve/apps/apps_st/appl/FEM/12.0.0/lib/libfem.a /u02/oracle/DEVE/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a /u02/oracle/DEVE/apps/apps_st/appl/eng/12.0.0/lib/libeng.a-lsql10 - lclntsh "cat»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lnro10 /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags ' cat»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lclient10-lnnetd10-lvsn10-lcommon10-lgeneric10 /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags - lmm-lcore10-lxml10-lunls10 - lsnls10 - lnls10-lcore10-lnls10 ' cat 'cat /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags ' '--»-lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lnro10 /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/ldflags lnsslb10-lncrypt10-lnsgr10-lnzjs10-ln10-lnnz10-lnl10-lclient10-lnnetd10-lvsn10-lcommon10-lgeneric10-lcore10-lxml10-lunls10-lsnls10-lnls10-lcore10-lnls10-lclient10-lnnetd10-lvsn10-lcommon10-lgeneric10-lcore10-lxml10-lunls10-lsnls10-lnls10-lcore10-lnls10 « cat /u02/oracle/DEVE/apps/tech_st/10.1.2/lib/sysliblist » -ldl -lm - lpthread /u02/oracle/DEVE/apps/apps_ St/Appl/SHT/12.0.0/lib/rwtools/libtls0s.a /u02/oracle/DEVE/apps/apps_st/appl/sht/12.0.0/lib/stubs/libstdc++.so /u02/oracle/DEVE/apps/apps_st/appl/sht/12.0.0/lib/stubs/libgcc_s.so.1
  '. (gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' référencé dans la section «.rodata» dele de /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o): defined in article scrapped. GNU.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' of u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCDbCrSumExElem.o)
  '. (gnu.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' référencé dans la section «.rodata» dele de /u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o): defined in article scrapped. GNU.linkonce.t._ZN14SimpleTreeIterI3ValEppEv' of u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/lib/libfem.a(FCMathExecOp.o)
  collect2: ld returned 1 exit status
  make: * [/ u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin/FEMCCE] error 1
  Done with the link of the MEF executable 'FEMCCE' Thu Oct 24 16:44:07 CDT 2013

  Relink the module 'FEMCCE' failed.
  See error messages above (also recorded in the log file) possible
  reasons for the failure.  In addition, please check that the Unix username
  running adrelink to read, write and execute permissions
  on the u02/oracle/DEVE/apps/apps_st/appl/fem/12.0.0/bin directory.
  and that there is enough space on the disk partition
  containing your Oracle Applications installation.

  Done with the link of the product "MEF" Thu Oct 24 16:44:07 CDT 2013

  
  adrelink dating status 1

  End of session adrelink
  Date/time is Thu Oct 24 16:44:07 CDT 2013
  **********************************************************

  Back to the log file for readability line...
  Fact the line log file.

  Original copy is /u02/oracle/DEVE/apps/apps_st/appl/admin/DEVE/log/adrelink.lsv
  New copy is /u02/oracle/DEVE/apps/apps_st/appl/admin/DEVE/log/adrelink.log

  Read these notes.

  R12: MSC Modules error when reissue of links with Adrelink (Doc ID 1345788.1)

  MSC reissue of links error on Linux OEL5/RHEL5, failed to repeat the link of the module 'MSCCPP', 'FEMCCE', 'MSCNEW', 'MSCMON. There is problem of repeat no. MSC on RHEL 4 (Doc ID 1128486.1)

  R12: Cannot be reprinted executable MSC on OEL5/RHEL5 (Doc ID 781553.1)

  Link again of the 'Femcce' Module could not leave 12.1.2 the SLES 10 or OEL/RHEL 5.4 (Doc ID 1102988.1)

  Thank you

  Hussein

• access violation at address 0041B7D6 in module AcrobatPro_11_Web_WWMUI.exe read access 00000008

  When you install Acrobat Pro, I get these errors:

  EAccess violation in module AcrobatPro_11_Web_WWMUI.exe at 0001B7D6

  access violation at address 0041B7D6 in module AcrobatPro_11_Web_WWMUI.exe read access 00000008

  The program will not work.

  Help?

  Looks like you have a corrupt file and need to download again. Also great download, it is not surprising that an error occurs.

• Failed: Cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  When I try to run the converter that we receive the following error message, FAILED: cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  RaymondT

  Given that the conversion works, you can have a software or configuration of Windows Server. Check the Windows event logs. Anything in current policies that could prevent?

• Relink the module 'MSCMON' failed

  Hi all
  
  I am running the patch 9239090 to upgrade my ebs r12 12.1.1 to 12.1.3
  
  operating system: OUL5x64
  database: 11 GR 1 material 11.1.0.7
  
  He failed at the beginning of the stage and asked if I want to keep it as success. Then I answered YES then the upgrade continues.
  
  can someone please advise what I need to do... continue and connect the modules subsequently failed. or re - run the upgrade...
  
  
  looked at the relink.log below I didn't know the cause of the error.
  
  
  
  
  
  Links module "MSCMON" reissue, the SMC product...
  
  do f
  /U01/Oracle/sunset/apps/apps_st/appl/Admin/sunset/out/link_msc_20863.MK
  /U01/Oracle/sunset/apps/apps_st/appl/MSC/12.0.0/bin/MSCMON
  
  From the link of the SCM executable "MSCMON" the sea Sep 14 17:41:35 PDT 2011
  g ++-m32-L/u01/oracle/SUNSET/apps/tech_st/10.1.2/lib
  -L/U01/Oracle/sunset/apps/tech_st/10.1.2/lib/stubs - lclntsh o
  /U01/Oracle/sunset/apps/apps_st/appl/MSC/12.0.0/bin/MSCMON
  /U01/Oracle/sunset/apps/apps_st/appl/MSC/12.0.0/lib/mscmon.o.------
  /U01/Oracle/sunset/apps/apps_st/appl/MSC/12.0.0/lib/libmsc.a
  .......
  .......
  .......
  collect2: ld returned 1 exit status
  make: * [u01/oracle/SUNSET/apps/apps_st/appl/msc/12.0.0/bin/MSCMON] error 1
  Done with the link of the SCM executable "MSCMON" the sea Sep 14 17:41:38 PDT 2011
  
  Relink the module 'MSCMON' failed.
  See error messages above (also recorded in the log file) possible
  reasons for the failure. In addition, please check that the Unix username
  running adrelink to read, write and execute permissions
  on the u01/oracle/SUNSET/apps/apps_st/appl/msc/12.0.0/bin directory.
  and that there is enough space on the disk partition
  containing your Oracle Applications installation.
  
  
  Thanks in advance.
  Kind regards

  Please see (error of rebinding MSC on Linux OEL5/RHEL5, recreate a link of the module 'MSCCPP' failed, 'FEMCCE', 'MSCNEW', "MSCMON". There was no. MSC re-edit the link problem when working on RHEL 4 [1128486.1 ID]).

  Thank you
  Hussein

• Link again of the 'adpchnew' module has failed.

  Cheap DBA
  
  Application: 11.5.10.2
  Database: 10.2.0.4
  O / S: RHEL 4.0
  
  I do the installation of discoverer. Suite using discoverer 10.1.2 with Oracle E-Business Suite 11i [313418.1 Id].
  I am trying to post installation steps and apply the 6430269 hotfix, it gave the error relinking.
  
  Please see the following error message.
  
  From link to executable ad "adpchnew" Fri Jun 25 12:32:02 GST 2010
  GCC-s-L/s02/prod/prodora/8.0.6/lib-L/s02/prod/prodora/8.0.6/lib/stubs - ldl
  /S02/prod/prodappl/ad/11.5.0/bin/adpchnew o
  /S02/prod/prodappl/ad/11.5.0/lib/adpmain.o.------
  /S02/prod/prodappl/ad/11.5.0/lib/libad.a
  /S02/prod/prodappl/FND/11.5.0/lib/libfnd.a - lsql
  /S02/prod/prodora/8.0.6/lib/nautab.o /s02/prod/prodora/8.0.6/lib/naeet.o
  /S02/prod/prodora/8.0.6/lib/naect.o /s02/prod/prodora/8.0.6/lib/naedhs.o ' cat
  ' /S02/prod/prodora/8.0.6/lib/naldflgs-lnetv2 - lnttcp - lnetwork - lncr
  cvsl - of - lclient - lcommon - lgeneric - lmm-lnlsrtl3-lcore4-lnlsrtl3-lcore4
  lnlsrtl3-lnetv2 - lnttcp - lnetwork - lncr - cvsl - lclient - lcommon - lgeneric
  -lepc-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3-lclient - cvsl - lcommon
  -lgeneric-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3 ' cat
  S02/prod/prodora/8.0.6/lib/sysliblist' - ldl - lpthread - lm
  /S02/prod/prodora/8.0.6/RDBMS/lib/defopt.o
  /S02/prod/prodora/8.0.6/RDBMS/lib/ssbbded.o
  /usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: reference to the undefined
  'dl_iterate_phdr@GLIBC_2.2.4 '.
  collect2: ld returned 1 exit status
  make: * [s02/prod/prodappl/ad/11.5.0/bin/adpchnew] error 1
  Done with link to executable ad "adpchnew" Fri Jun 25 12:32:04 GST 2010
  
  Link again of the 'adpchnew' module has failed.
  See error messages above (also recorded in the log file) possible
  reasons for the failure. In addition, please check that the Unix username
  running adrelink to read, write and execute permissions
  on the s02/prod/prodappl/ad/11.5.0/bin directory.
  and that there is enough space on the disk partition
  containing your Oracle Applications installation.
  
  Reissue of links module "adrebase" in product announcement...
  ==================================
  
  From link to executable ad "adwrknew" Fri Jun 25 12:32:04 GST 2010
  GCC-s-L/s02/prod/prodora/8.0.6/lib-L/s02/prod/prodora/8.0.6/lib/stubs - ldl
  /S02/prod/prodappl/ad/11.5.0/bin/adwrknew o
  /S02/prod/prodappl/ad/11.5.0/lib/aiworker.o.------
  /S02/prod/prodappl/ad/11.5.0/lib/libad.a
  /S02/prod/prodappl/FND/11.5.0/lib/libfnd.a - lsql
  /S02/prod/prodora/8.0.6/lib/nautab.o /s02/prod/prodora/8.0.6/lib/naeet.o
  /S02/prod/prodora/8.0.6/lib/naect.o /s02/prod/prodora/8.0.6/lib/naedhs.o ' cat
  ' /S02/prod/prodora/8.0.6/lib/naldflgs-lnetv2 - lnttcp - lnetwork - lncr
  cvsl - of - lclient - lcommon - lgeneric - lmm-lnlsrtl3-lcore4-lnlsrtl3-lcore4
  lnlsrtl3-lnetv2 - lnttcp - lnetwork - lncr - cvsl - lclient - lcommon - lgeneric
  -lepc-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3-lclient - cvsl - lcommon
  -lgeneric-lnlsrtl3-lcore4-lnlsrtl3-lcore4-lnlsrtl3 ' cat
  S02/prod/prodora/8.0.6/lib/sysliblist' - ldl - lpthread - lm
  /S02/prod/prodora/8.0.6/RDBMS/lib/defopt.o
  /S02/prod/prodora/8.0.6/RDBMS/lib/ssbbded.o
  /usr/lib/gcc/i386-RedHat-Linux/3.4.6/libgcc_s.so: reference to the undefined
  'dl_iterate_phdr@GLIBC_2.2.4 '.
  collect2: ld returned 1 exit status
  make: * [s02/prod/prodappl/ad/11.5.0/bin/adwrknew] error 1
  Done with link to executable ad "adwrknew" Fri Jun 25 12:32:08 GST 2010
  
  Link again of the 'adwrknew' module has failed.
  See error messages above (also recorded in the log file) possible
  reasons for the failure. In addition, please check that the Unix username
  running adrelink to read, write and execute permissions
  on the s02/prod/prodappl/ad/11.5.0/bin directory.
  and that there is enough space on the disk partition
  containing your Oracle Applications installation.
  
  Kind regards
  SG

  Check this thred
  libgcc_s.so: refers to 'dl_iterate_phdr@GLIBC_2.2.4' the undefined

• Relink the module 'MSCSLD' failed.

  Dear Sir
  
  I register patch 8222387 on ebs R12 RUB6 ORACLE LINUX5 X 64
  AND RECEIVE THIS ERROR MESSAGE. I checked these warning, the user, the authorization of the space they are very good and re - run the patch new and got the same error
  
  Please notify
  I can CONTINUE AS IF IT WERE SUCCESSFUL?
  
  Thanks in advance.
  
  
  Reissue of links module "MSCSLD", the SCM product...
  
  do /u01/oracle/GOLD/apps/apps_st/appl/admin/GOLD/out/link_msc_31895.mk f
  /U01/Oracle/gold/apps/apps_st/appl/MSC/12.0.0/bin/MSCSLD
  
  From the link of the SCM executable 'MSCSLD' Wed Apr 29 22:07:33 PDT 2009
  g ++-m32-L/u01/oracle/GOLD/apps/tech_st/10.1.2/lib
  
  Relink the module 'MSCSLD' failed.
  See error messages above (also recorded in the log file) for the possible reasons for the failure. In addition, please check that the user name Unix running adrelink to read, write and execute on the u01/oracle/GOLD/apps/apps_st/appl/msc/12.0.0/bin directory permissions.
  and that there is sufficient space remaining on the disk partition containing your Oracle Applications installation.

  Hello

  Please refer to the following document, it should be useful to resolve the error.

  Note: 781553.1 - R12: cannot be reprinted executable MSC on OEL5/RHEL5
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=781553.1

  Kind regards
  Hussein

• Use the same code module to multiple steps in the sequence

  Hi all

  I tried to implement a sequence that uses the same code for all steps module in the order, but I'm not returning to it when I need to send it commands.  I got regarding the appellant the VI in a new thread so that it can be executed asynchronously.  I can run the simple sequence and it will indeed open the VI and move to the next step.  When I close the VI manually from the front, the TestStand sequence is completed, as planned.  So it turns out that I have a lot more work.

  My question is how to call the thread separate from the main sequence and other sequences overtime when I need to change the settings.  If I insert a step in the Action, I have to select a file of VI, but from what I can tell, it opens another instance of the file and does not provide an interface with the other asycronously running instance.  My next guess was to use a stage of education, but I was not able to understand how to configure the search string to call the VI settings.  In addition, I don't know how to proceed.  Please notify.

  My intention is to start the module code (asynchronously) VI, run several different subsequences in the main sequence, which call this same VI and edit its settings, close everything and report the results.  If I'm understand how TestStand is supposed to work, please let me know.

  Thank you

  GSinMN

  What I do is use a queue to send data to the asynchronous VI.  So he can run and whatever, but also receive orders from the queue.  I use a motor of Action that contains the reference to queue and sends the commands.  If you really just call the engine of the Action of your sequences.

• When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

  I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

  Discussions were merged.

  Deleted duplicate.

  Original title: failure of the Dll

  The error seems to be a common problem with Dell laptops:

  http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

  It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

  Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

  http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers

• cannot delete the folder I am one user have access to all the files and folders can remove any but one could take ownership of disk backup file

  Cannot delete the folder, I can move it, is presantly on my desk, I'm only user I have access to all the files and folders can remove everything, but this one, took possession of the file. file is made backup disk before I reloaded vista Explorer cause did not work right

  Try to open an administrator command prompt. Then cd to the desktop. Finally, run 'attrib-h - r s' and also ' attrib s h - r/s -*.» * ». Then right-click on the folder and check the button unblock. Similarly, with all the files in the folder, pledge. Never underestimate your own stupidity.