HP EliteBook 840 G1: GPS Module - find cell phone lost / stolen eventually
Greetings.
One of our new cell phones seems to be missing and we cannot find it within the company.
Either this is move - or in the worst case scenario, stolen.
As these laptops has a GPS module, can we track down with the help of HP?
No third-party tools when installed from our part for this.
Best regards
Paul.
Dear customer,
Welcome and thanks for posting your question on the Forum of Support HP
Answer to your question is 'NO' as we cannot follow the specifications
What you can try to:
1. call HP Technical Support and report this problem
2. get a case for your conversation with the representative number immediately
3. Please find the reception of your laptop, scan a copy of it and send you a copy of it in your Inbox
4. Please contact the nearest Police station and make a complaint about your laptop is stolen
5. delivery of the hard copy of the invoice of your laptop the cops
6. keep in touch with cops and tracking to get an update as and when you need
Note: HP is not responsible for any loss of data or information on your laptop because there is no way to track your
Laptop
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the white button on the right to say thank you Thumbs Up *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
Although I am an employee of HP, I speak for myself and not for HP
Tags: Notebooks
Similar Questions
-
Hello
I can't find acquisition of ICP data and Signal Processing controller, memory controller PCI bus controller SM for HP EliteBook 840 G3 running Microsoft Windows 7 Enterprise (64-bit).
Any help is greatly appreciated!
Hello:
See if this driver works...
-
Satellite M40x-134: my cell phone tracking stolen
My Satellite M40x-134 with serial # 65241250K was stolen from my car yesterday. How can I track through centers of Toshiba or any other method?
Hello
It's very sad.
I found an instruction manual the user what to do if the laptop has been stolen.
Certain information is required to uniquely identify your computer:-in what country was your stolen computer
-What type of machine do you have
-What was the model number
-What was the serial number
-When the laptop was stolen
-your address etc...Then you can visit this Toshiba site and choose the option units stolen:
_eu http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=eu&ID=Support_HomepageGood luck
-
I bought a laptop on ebay, but have not received this laptop because it was lost in transit. The seller sent me a serial number of meadow-shippment and the product number for this PC. Is it possible to trace this laptop using these details? Need help please, I have spent a fortune on this HP Notebook dv6-3120US P540 2.4 G 4 GB 500 GB Win 7 PC. Thank you in anticipation
Hello
Sorry, no way with only these details. That was a source of reputation. You can cancel the payment.
Good luck.
-
EliteBook 840 G3: Find the license key of Windows 10 for the new computer laptop
My company recently purchased 2 HP Elitebook 840 of the G3 that come with Windows 10 Pro. I did a clean install with a customized image of Windows 10 Pro, but I get an error of activation. Where can I find the license key for our new computers?
Once more, the license IS installed on the PC - that it is embedded in the motherboard UEFI firmware - but as I've said several times now, it is ONLY for the HP OEM of Win10 which was preinstalled version.
OK, so try this utility: http://www.tenforums.com/software-apps/2577-showkey.html
But don't be surprised if it does not work with the version of Win10 that you have installed.
-
HP Elitebook 840 G1: HP Elitebook 840 G1
I'm almost done with this thing.
I bought this HP EliteBook 840 G1 offshore from a friend who really takes care of his business. The laptop is dust free and looks just out the box. It is originally with Windows 7, but I decided to upgrade to Windows 10 because he was free and promised many new features. Everything was ok with the occasional bug (audio does not, fingerprint reader not to read), but a simple reboot usually covered the problem. Yesterday, I got set up a complicated Movie Maker project and type 2 separate school trials when the indicator wifi on the Elitebook turned orange and wouldn't connect to the wifi. I have saved my work and restarted my computer to find "error 3F0 - please install an operating system on your hard drive. So I had to wipe the drive, install Linux Ubuntu, and here I am with several weeks of work lost and an unpredictable old 2 year for laptop. Extensive BIOS tests show the hard drive and memory have "PAST".
I'll assume it of Windows 10 because the cell phone was fully functional on Windows 7 and works great on Linux Ubuntu 16.06. The reason why I write this is because I don't have Windows 7 to install on the device. I have the product key original on the bottom of the computer, but on the official Windows 7 download page software, he told me to contact HP support.
Any help with a .iso Windows 7 Professional x 64 link would be amazing. Again, I have my own product key and I can use Rufus to make it bootable from my USB. Thank you.
Hello:
Microsoft has pulled all the links legal download of files Vista and W7 ISO unless you have a valid product key commercial complete to enter this Web site.
The product key on the bottom of your laptop is an OEM key, not a retail one.
If you live in the USA/Canada, call HP at this number to order a set of W7 Pro x 64 recovery disc.
Have the serial number of the PC handy to give to the customer service rep.
1-800-334-5144
A set is expected to cost about $10 shipped by first class mail.
-
EliteBook 840 G2 - driver problem
Hello
I am struggling to find the drivers below. I think I downloaded all the drivers available for Windows 7-32 bit of the system, and it is not the problem.
Some research on Google, which leads me to believe that it could be something with the BIOS and Intel Smart Connect technology; However, I do not think this new Board of Directors has the ISCT and I've updated the BIOS and the problem persists. Any help is appreciated! Thank you very much!
Can not find the drivers for "Unknown device" with the identifier material:
{55BC022C-955B-4D87-A88D-D3E68CBEB2F4}\CT_27B961DB-3057-49BB-BD0D-ACA9FD8FF697
ACPI\INT3397Fixed with this:
sp70214.exe
downloaded here:
http://ftp.HP.com/pub/SoftPaq/sp70001-70500/sp70214.exe
TITLE: NXP NPC100 close ground proximity drivers
VERSION: 3.7650.10422.30 REV: C PASS: 7
DESCRIPTION:
This package provides the driver for the NPC100 near field of NXP Semiconductors
Proximity module. This package is available for the models of laptops
running a supported operating system.
PURPOSE: Routine
SOFTPAQ FILE NAME: SP70214.exe
SOFTPAQ MD5: 1323767617399e02843f10bb484599f0
REPLACES: no
ENTRY INTO force: 23 December 2014
CATEGORY: Driver-network
SSM supported: Yes
PRODUCT TYPE (S):
Laptops
MODEL OF PRODUCT MATERIAL (S):
Laptop HP EliteBook 1040 G2
Laptop HP EliteBook Folio 1020 G1
Laptop HP EliteBook 840 G2
Laptop HP EliteBook 740 G2
Laptop HP EliteBook 850 G2
Laptop HP EliteBook 750 G2
ZBook 14 G2 HP Mobile Workstation
Mobile HP ZBook 15u G2 workstation
HP EliteBook turn 810 G1 G3 -
Hi all
Here's the question I have that I noticed on my laptop Elitebook 840, Windows 7 64-bit business management.
When I click on F4, it takes the computer to the lock screen. Normally this wouldn't be a problem, but there is a problem, because the F4 is the key in excel which is supposed to provide absolute references to cells or the "$", as many know. It has all the ineffective because now I have to type the $ manually and I do not know why it is like that.
I already tried the bios for the Fn keys option, but it just made my Fn key wont work at all, so I had to undo this change. I looked in the bios, but could not find anything else specifically associated with the F keys, let me know if I missed something.
Just knowing this is what happens:
F4 - any application/program - sends me it to the lock screen
FN + F4 - give me the prompt to a different display for multiple display configurations configurations - works as expected.
CTRL + F4 - closed the active window (yes I did completely during this first strike), as expected.
ALT + F4 - same as ctrl f4, also as expected.
AFAIK there is no any other combination of F4 there, and I really prefer not having to press something with F4, whenever I make an absolute reference. I also looked in excel, but saw no option.
Finally, it is a work computer, but I guess that our IT guys do not always use Excel, as he seemed to have little interest to fix the problem, but I don't have the ability to actually download things (like a hotkey regedit) or the software assistant HP, nor I would want to take the risk of malware (from a 3rd party) or addition of bloatware (from HP) on my new work computer.
Any help that can be offered would be appreciated.
Respectfully,.
Michael
Hi all
I found a solution, which is probably pretty specific to my business, but in case someone of another company uses HP laptops with the following software, it might be something interesting to look at.
Our company uses Imprivata Agent as a single sign - on a keeper and there was a glitch or user access issue which eventually cause F4 lock the computer screen. Once my COMPUTER service has been able to reinstall and reconfigure my rights on Imprivata the problem disappeared after a few business days, and F4 is finally working right.
So if you're having for my specific problem and typical bios option does not work for you, then perhaps check some other incompatible software.
Respectfully,.
Michael
-
EliteBook 840 G2: USB3.0 driver for Elitebook 840 G2
Hello
I use Elitebook 840 cell G2 and Setup driver USB3.0 (file: SP69862). However, the software poped error message (the Installer failed to install one or more device drivers) at the end of the installation. You can reference attach the file Setup log in link here.
Please help me solve this problem. Thank you!
Hello:
See if the driver directly from Intel works...
Download, unzip and run the setup.exe file.
-
EliteBook 840 D1F44AV: Legal re-installation of Windows / COA
Hello
Having a sticker of COA that reads HP Windows 7 Pro OA to the back of the laptop means that the laptop comes with legal pre-installed Windows, if so can I use any windows media to reinstall as long as it's the same version, or should I use a HP recovery DVDs? that is important if the Windows I'm trying to install is 32-bit or 64-bit? I ask because I have an Elitebook 840 that has what I think a windows no legitimate Pro 7 32bits and there is no recovery partition.
Thank you
The presence of a Win7 COA sticker means that the PC has been preinstalled at the factory with a version of Win7 OEM HP.
You cannot use any version of Win7 to replace that, because only an OEM version will activate using the product key that came with your PC.
IF you are using an OEM HP's version, it will activate, but HP is more for older PC Win7 recovery media. Instead, you must check this site to see if they still carry the media for your PC: http://www.computersurgeons.com/ and http://www.restoredisks.com/
From the point of view of activation, it doesn't matter if it's 32-bit or 64-bit, because they use the same product key, but if you are installing a different version, you may not be able to find the HP drivers for it, as HP mainly provides 64-bit computers.
Good luck
========================================================================
I'm a volunteer and I do not work for, or represent, HP.
---------------------------------------------------------------
If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
If my posts resolved your issue please click "accept as a Solution.
======================================================================== -
HP Elitebook 840 3: Adapter for HP Elitebook 3 840
Can I use a HP 756413-002 power adapter to power my laptop HP EliteBook 3 840? the power output is 65w but the OE adpater has a power output of 45w.
Hello
I can't find in party store 756413-002
http://PartSurfer.HP.com/search.aspx?SearchText=756413-002
but the HP Elitebook 840 G3 accept 45W both 65W adapters as shown:
Voltage and current:
- 19.5 v dc @ 2.31 A - 45 W
- 19.5 v dc @ 3.33 A - 65 W
In fact, I use the PSU bit for my laptop. For travel, I use a lighter (low power)...
Kind regards.
-
EliteBook 840 G1: Lost password BIOS - Elitebook 840 G1
Hello! I need help.
I lost my BIOS password on my work laptop. The last employee had an administrator password for all the BIOS settings. But my account has read-only access. I need to turn on virtualization technology, but I can't do it. Please, help me to have access to all parameters.
Model: HP Elitebook 840 G1
Product number: H5G26EA #ACB
Hello
Unfortunately, business machines such as Probooks or EliteBook have more strict security consumption patterns - they do not produce "stop codes", the password cannot be derived from the serial number and the code is stored in a nonvolatile memory to remove the RTC cell does not reset the password in this case.
If you Contact HP Business support they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.
Kind regards
DP - K
-
EliteBook 840 g 2: boot usb
Hi gurus
(A)
I would like to make it bootable usb win 7 pro x 64 FIX;
laptop is not equipped with an optical drive.
(B)
I have a windows to go drive hard usb3 workspace to another laptop (win 7 x 64 home prem);
MBR, NTFS, single partition;
works when it is running on x 64 pro win8; works by operating on Vista x 86 ATU;
does NOT (cannot start) on elitebook 840 G2 win 7 x 64 pro;
thnx in adv
SPC
Hey there!
Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
I understand that you can not boot from USB.
Try a few steps recommended below.
A. Click Start in the search box type CMD.
Right click on command prompt and select run as administrator
Run diskpart utility by typing diskpart in the command prompt window and press "Enter."
Find your USB drive disk number by typing disk list. We assume that the USB drive is 1.
Run the following commands:
Select disk 1
clean
create the primary partition
Select partition 1
assets
format fs = NTFS
Assign
output
Now, we have prepared a USB drive. Let's make it bootable:
Insert the 32/64-bit installation disk in the Windows 7 DVD drive. Assume that it is D
Go to D:\boot (cd d:\boot)
If your USB drive letter is "e" Please run bootsect/nt60 e:
Copy Windows 7 DVD multimedia content in root USB (etc. do not put in any folder) folder
You are now ready to install Windows 7 from a USB key!
B. you said that you are unable to boot from a flash drive on 840 G2.
Turn on your computer, keep tapping key F10.
You will start in the BIOS change the inheritance of secure boot startup option.
Save the changes and exit the BIOS.
You should be able to boot from the flash player now.
Let me know how it goes!
Have a great day!
-
EliteBook 840 G1: elitebook 840 g1 pci
Hello!
I have a quick question that I find no answer too... y at - it a PCi express slot? Y at - it an option to install an eGPU (external Graphic Processing Unit) on a HP Elitebook 840 G1? know someone that?
Thanks for taking your time to read and reply
-TribusionProbooks until i-core of 2nd generation had card expresscard slots. Abandoned since.
EliteBook until 3rd gen i-core had card expresscard slots. Abandoned since.
Only ZBook 15/17 4th generation i-core laptops have expresscard/Thunderbolt ports.
840G 1 has a slot of mPCIe used for the wifi card. Who can host an eGPU but keep in mind that HP is not port mPCIe unless a wifi card is detected at startup. This can be a little more cumbersome installation because it may require priming with hotswapping, wifi, or sleep/permutation of eGPU instead of the card wifi adapter card.
-
EliteBook 840 G2: Elitebook after Windows 10 Upgrade keys does not
Hi on board,
I'm a 840 Elitebook brand new last week with Win7 and directly upgraded to Win10 64-bit yesterday. It works although until now unless there is a big thing, some keys (FN + F9 for example) are not executed. You know, those little keys most of us use a lot to adjust the brightness or volume.
In my case, there is the problem with FN + F8, F9 and F10 (off mic, down screen brightness and the brightness of the screen to the top). Other keys work fine (for example, volume).
Someone at - it a specific link to a Win10 driver for this problem. I was looking on the half-hour but can't find anything (especially not the solution for Win8 proposed with the hot key driver). It might be my problem due to the fact that I'm not used to the new page from HP.
Any help is appreciated a lot,
Since the Switzerland
Hello here is the driver for the keyboard shortcut support, you can try on Elitebook 840 G2:
Maybe you are looking for
-
Qosmio G10 - battery DISCHARGE very quickly from 50% to 3%
My laptop battery runs from 100% up to 50%, then he spends 3% direct.I thought that the battery is bad. I bought a new one and the same problem occurs.I tried to re - calibrate the battery but noway, change the version of the Bios, but the same probl
-
How to convert signals from the time domain to frequency response
-
How can I get the Outbox for sending messages to the sent box after I sent?
recently, I was informed that my email has been sent more than once. Sometimes it was as much as 15 times. I found that the messages were kept in my Outbox and will not not in sent after filing box. I get an error message. How can this problem be sol
-
Incompatible print cartridge error message
Below you can find a video on setting a cartridge print Incompatible error message in an Officejet J4680 printer. The steps it will show you how to do the following procedures. 1. Remove and inspect the cartridges 2. how to clean cartridges and what
-
When I copy and paste into my Corel Draw, the image is distorted with the cutting tool
Original title: the cutting tool false image I used snipping too long without problem. Now all of a sudden (only when I copy and paste into my Corel Draw) the image is distorted. I use windows 7 64-bit.