GPS problems - no icon and "location unavailable" in the search

Similar Questions

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• have the icon to download helper with video up, I have until it clicks, dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  I was able to load videos 26 then he stopped down. I checked the preferences, the version is 4.9.24, I can see that the video is listed next to the icon, when I drag the mouse over it.

  I support download icon, when the video is running. I click next to the icon and choose the game I want, on fast download I see it loads, but no dwhelper. dosnt download or convert a number appears next to the icon and its listed in the queue draft.exe

  There is a problem with DownloadHelper Firefox 36. They are working on a new version, you can download and help test this discussion page:

  https://groups.Google.com/Forum/#! Forum/video-video downloadhelper-5

• How can I remove an item from the death of the select icons and notifications appear in the taskbar?

  When I open "Select icons and notifications appear in the task bar" one of the things it lists is "GLBD565.tmp" which seems to be left by the installation of a software product.  The icon is not active and I doubt if it still exists, but it appears in the list.  That list is maintained and how to remove the dead of her spots?

  The entries to Customize Notifications cannot be removed selectively. You can, however, clear the set lists by using the following registry change.

  1. Click Start, type regedit in the Search box and press ENTER.

  2. Locate and then click the following registry subkey:
     Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify HKEY_CURRENT_USER
  3. In the Details pane, click the IconStreams registry entry.
  4. On the Edit menu, click delete, and then click Yes.
  5. In the Details pane, click the PastIconsStream registry entry.
  6. On the Edit menu, click delete, and then click Yes.
  7. Exit Registry Editor.
  8. Restart the Explorer.exe process. To do this, follow these steps:
  9. Press CTRL + SHIFT + ESC.
  10. On the process in the Task Manager tab, click the process explorer.exe and then double click on end process .
  11. On the file menu, click new task (run), type Explorer and click OK.
  12. Exit Task Manager.

  (c) Microsoft Corporation

  -or-

  Download and run a VBScript script that automates the steps above.
  How to delete items from the Notification area in Windows 7/Vista/XP

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How can I increase the size of location box and decrease the size of search box? The location was smaller and more small while the search box took the reports.

  The location box is so short, I don't see the url I type in, for example "yahoo.com" while the search box is so long that I can type a whole sentence in

  Place the mouse pointer between the address bar and the search bar, and it will become an icon of resizing that you can drag to the right or left to adjust the relative size of the two bars.

• Denial of world App because of icon and app stuck on the first page

  I recently submitted my application for approval, but I got the same problems of feedback twice now:

  -After the installation of your application on BlackBerry Z10, Q10, Z30, there is the icon of the application is / mark questions. If you use our Eclipse plugin, please check your BlackBerry_App_Descriptor.xml file and make sure that you correctly specify your custom application icon
  -When typing your app, application pasted on the first page. Please make sure that your app work correctly.

  I have included a custom icon specified in the configuration file with the .

  I have also run the application on my device dev-alpha with no problems. The screenshot that I received the first time in support of BB showed no bar to future Action to exit the splash screen; However, when I run the app on my dev-alpha device I am able to see the action bar and navigate to my three monitors.

  Someone else has experience this problem?

  There is no such thing as all my code to inspect at github

  Thanks in advance for the help.

  Hello

  What version of OS are you running on your device?

  The action bar is probably due to an outdated version of bbUI.js be used. Currently using:
  https://github.com/InnovateorDieOnline/Bote/BLOB/master/index.html#L11

  Which is: bbUI VERSION: 0.9.6.15

  So that the most recent:
  https://github.com/BlackBerry/bbUI.js/BLOB/master/pkg/BB10/BBUI-min.js

  Is actually: bbUI BB10 version: 0.9.6.889

  There are a number of BBUI updates that were needed to support future versions of 10.1 and 10.2. Probably an update to your library BBUI is necessary.

  Regarding the app icon, I don't know exactly. If you are ready to send me your record of BAR ([email protected]), I can verify that the config.xml file / BAR descriptor are configured correctly.

• Problem activation of new tabs, end old tabs, and inability to use the search and navigation of facebook

  cursor does not

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Problem reading DVD and CD - RW on the Satellite 1800 412

  HI -.

  My laptop has recently stopped playing all DVD and CD - RW - ordinary CD work fine, but when I try to play a DVD or a CD - RW it whirs for a while, then I get the message "Windows cannot read this disk. The disc may be damaged, or it could be in a form that is not compatible with Windows.

  I use a Satellite 1800-412, Windows XP (home edition) Service Pack 2, and the DVD drive is a SD-C2502.

  I watched the updates of the firmware of my drive to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home as this is often recommended for problems of this kind on this forum - but not all are available.

  Any suggestions?

  Thanks much :-)

  Hello

  I read on some sites that doesn't update the firmware solves this problem.
  I recommend you to remove the drive from Device Manager.
  After restarting again the operating system should recognize the drive again. Perhaps this procedure will help you solve this problem.

  Concerning

• Irish critical update needed to solve the problem of black and white tv on the G20!

  I recently had trouble with the implementation of the tv on my Qosmio G20, I was directed in the direction of an issue of black and white affecting earlier models. The solution to the problem was to use the drivers of the g20 and run 2 reg files.

  Having done that I tried all combinations Irish possible, with still in black and white without success, I then tried UK and got the color.

  I mucked with the recording files and found that there is no Irish layout in the file, then when a user updates to Ireland as their situation they will always get black and white.

  The Ireland uses the exact same settings for television as in the United Kingdom, however if a person chooses UK they fall outside the Irish guides or Irish to choose channels amongst (Ireland is not part of the United Kingdom)

  I found the settings for the United Kingdom-

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\44]
  @= "United Kingdom".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  Thinking the 44, was the dialing code for the United Kingdom (which took a while to understand), I added an entry to register with exactly the same parameters but with the Ireland and 353 above.

  [HKEY_LOCAL_MACHINE es\ttv200x\Parameters\353]
  @= "Ireland".
  "FreqBoundary" = dword:000493e0
  "LB_VideoStandard" = dword:20000080
  "LB_AudioStandard" = dword:00020000
  "LB_ShiftFreq" = dword:00000abe
  "HB_VideoStandard" = dword:20000080
  "HB_AudioStandard" = dword:00020000
  "HB_ShiftFreq" = dword:00000abe

  I now have color tv under the Irish settings in the library, I also make it sound now, where before I didn't. I hope that the code above will add registry files named ttv2_regdata_20050111.reg that comes as part of the correction of pilot http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm to the problem...

  Thanks to jimi in what follows after http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.

  Hope this helps someone...
  laters taters...

  Hi Joseph

  It is very nice to hear that you solved your problem and thanks for the comments!

  Good luck!

• Is there a problem with accounting and 4.1 of the ACS

  Good day to all,

  I just installed a new server with ACS 4.1.

  This new installation 4.1 ACS is approved, I will retire my old server that ACS 3.1.

  At this point, the only problem I have with ACS 4.1 is with the accounting.

  For example:

  I used a test-router with all the necessary config pointing to my old 3.1 ACS. Everything works fine (authentication and accounting). If I enter a command on the router test it's journal on GBA 3.1.

  Now, if I change the test-router to point to the new 4.1 ACS, the ACS 4.1 will authenticate the router test correctly, but won't save any command that I enter the router test. I did a shot between the test-router and 4.1 of the ACS and the router test sends accounting statement ACS 4.1.

  There are many different configuration of ACS 3.1 4.1, but as far as I can see the config on the two ACS is as similar as possible.

  Y at - there anyone out there who could do 4.1 ACS to process accounting properly?

  Any idea will help you.

  Thank you

  Frank

  Here is my config:

  AAA new-model

  AAA authentication login default group Ganymede + local

  connection of AAA No.-AUTH authentication no

  AAA authorization exec default group Ganymede + local

  AAA authorization commands start-stop Group 1 Ganymede +.

  AAA authorization commands start-stop group 15 Ganymede +.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 1 by default start-stop Ganymede group.

  AAA accounting command 15 by default start-stop Ganymede group

  !

  192.168.100.16 host key radius-server *.

  (the above command is the only command I change to point the finger 3.1 ACS or ACS 4.1)

  RADIUS-server application made

  Please use the following link. It has 4.1 cumulative patch that contains the hotfix for bug.

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES

  Don't forget to download the readme text also.

  Rate me if it helps.

• Open a new tab in Firefox 16.0.1 the focus is on the address bar, and then moves to the search box

  When I opened a new tab in Firefox 16.0.1 focuses on the address for a second bar or then the focus moves to the search input field. If I start typing something that fills the first character in the address bar, then the rest is typed into the search field.

  How the development of stay in the address bar according to previous versions, please?

  MacBook Pro OS X 10.8.2
  Firefox 16.0.1

  Thank you.

  Hello surfersteve1970,

  Check it in Safe Mode, select "start in Safe Mode" and see if it will be repeated, otherwise see: Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Can I use Boolean operators, nested expressions, and generic expressions in the search function of the outputs of the HTML5?

  I come to the world CHM HTML5. Is there a way to enable/activate my audience to use:

  • Advanced (i.e. other than AND & OR) of the Boolean operators, e.g., CLOSE or NOT
  • Nested expressions, for example, newsletter AND ('formula design' OR 'form')
  • Generic expressions, for example, network * or MD5?

  I am currently using RoboHelp 10.

  This version runs (and if not, then don't RoboHelp 2015) support the ability to activate one of these in RoboHelp (via a parameter of GUI or even by manually changing the search.js or another file in the output of HTML5)?

  At present, RoboHelp (2015) only supports simple AND & OR operators if I'm not mistaken. If you need an advanced search, I advise you to look in the Zoom website search engine

  You can edit the mhfhost.js file. The search mechanism is quite complex, so I don't think it's a viable solution. Of course, please fill out a request for functionality with Adobe Adobe - feature request/Bug Report Form

• Firefox has crashed on the desktop. Get only the black screen, taskbar with icons and hourglass cursor of the mouse on the taskbar. Windows 10.

  I tried to restart Firefox, nothing helps. Then I tried to restart my desktop computer Dim screen with taskbar with icons, hourglass cursor that does nothing on tasckbar only. I tried to close everything down and restart - without success. I write from my laptop, the problem is on my desk - Hewlett-Packard, 2-3 years, running windows 10. Only one prior occasion when Firefox crashed. Restart of Firefox took care of the problem and has been fine since.

  Contact a computer repair. It seems that the system files are corrupted.

• P2715Q, Windows size and location change after the mode 'sleep'

  Hey

  After that the monitor wakes up fashion 'sleep', all the windows are in the upper left corner and in different size just before going to sleep. It makes me crazy. Did not help. Found a few registry hacks key, but it can't be that difficult.

  I use following:

  View P2715Q Dell, Windows 10 Pro GTX 1070

  Everything is up-to-date.

  Really hope you can help me!

  #update 1

  It has something to do with how long the mode 'sleep'. I set the Sleep mode function 1 minute, whereas the display 'falling a sleep' and woke up after 30 seconds or more. Everything was in place.

  This isn't a question of monitor. It is a video card driver problem. Tiles from 1920 x 1080 uses two P2715Q sewn together by the video card driver to get the resolution of 3840 x 2160. So if the video card driver is slow to initialize the awakening from sleep mode, all open windows and icons are tossed at top left. We see this issue "tile" on AMD and Nvidia drivers. All you can do is to continue testing video card drivers latest when they are released.

  Workaround solution =
  * Spend 90% of your icons to the taskbar or the far left background
  * Close all open windows before allowing computer standby modes

• I have windows xp home doesn't get my screen back no icons and no bar at the bottom of the screen

  nothing on the screen except the fall back.

  ricogrant,
  This article describes the type of problem that you are experiencing.  It guides you through several different troubleshooting steps.  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.