GPS recording location is not in LR4.1?

Similar Questions

• Public records that are not visible in Windows Explorer

  A couple of days, when I tried an attachment to an e-mail, Public Documents didn t appear. Normally it is under Documents, next to My Documents. But now the Documents contains: My Documents and Documents (C :). And that the Documents (c) contains a folder named MAGIX_Video_deluxe_16, (paying) video editing software. This folder contains subfolders with nothing in it. In any case, I just moved because this isn't a big deal, as I find the search bar hollow. Later this program is not only happened with Hotmail, but also with Microsoft Office.

  But now he also started to happen when I open Windows Explorer. It's huge because no irritation only me, but my family also uses public records files a lot. Can someone help me?
  Edit: If I access public Documents hollow C:\Users\Public\Public Documents, the files are there. It's that when I access the files with Windows Explorer.

  Try this first,

  

  Then, open the site link,

  

  If the Public location does not appear browse it and click Add.

  Remove anything but my Documents in the example in the photo,

  Repeat for the other categories.

• Geo location does not

  Hi all

  I have configured vC OPS 5.7 use of geolocation.

  I have successfully configured in vc ops key to google maps, created the "Geolocation" tags values & configured these values of tags with the correct location.

  The location of the research maps popup is ok and I can record it.

  But when I look at the tab overview of the geographical environment there is only a map of the Earth and I do not see the location that I saved.

  I missed something?

  thkx,

  Vinny

  Hi vinny95, make sure you click on the blue link when you choose your location for the ' lock in '-otherwise, the GEO location does not record.

  See the example below of my post on how to configure the widget GEO - in this example, I would click on the hyperlink to "Tiger Stadium" before hitting the Save button.  "PIN" in the Google map icon will change from the letter to a 'point' to make you know that you have made this choice.  It is a common mistake because most of the time setting this up, people know the exact address for a data center, there is not many sites found by Google... so you do not select!

  BEFORE the SELECTION - you should always click the blue link for location search result you want to...

  

  AFTER SELECTION - then click Save...

  

• Locator is not displayed correctly

  What location opens hot link, PLACE BAR IS EMPTY. Select history to make it appear.

  Location IS NOT UNDER the 'Window' menu (some do; "show more"Mozilla Firefox").

  First tab in the window SHOWS ONLY a '+', then when additional tabs are open, you cannot navigate back to the first tab except by closing all others.

  Very rude behavior.

  I had already tried to turn off all plugins and deleting of plist file. No change.

  Your tip has led me to "help: Troubleshooting Information: Reset Firefox" which seems to have worked.

• Location is not available. C:\windows\system32\config\systemprofile\desktop is not accessible. Access is denied.

  Ball Msg: unable to connect to a windows service. Windows could not connect to the service user profile Service. The problem prevents limited users to logon to the system.

  I was trying to deploy 1 Vista image on 4 laptops. I installed Vista Business (32 bit) on 1 laptop Dell Inspiron 1318. After I installed all my applications, I ran sysprep and has shutdown the laptop.

  Then I used the Migration of Paragon Hard Disk Manager 2009 HDD utility make a clone of bit by bit of disk SATA (75GB) notebook #1. (Previous attempts to use ImageX has failed) After drive cloning, I inserted the clone into an another Laptop Inspiron 1318. The installation of Vista program began with the EULA and I created a new account user (an admin a/c).

  When I tried to connect, I got the message: "the location is not available. C:\windows\system32\config\systemprofile\desktop is not accessible. Access is denied. "and the ball above message.

  I researched and found info telling me to reset the ACL in my desktop connection folder and systemprofile desktop folder. I've done those, but they have not resolved my situation. Another post said to create a new admin account. I did it too, but it did not solve my problem.

  I am unable to use any GUI interface after the half-login. I have to use the safe mode and the command line to get anything done.

  Help, please.

  Hi Phoogie,

  Your computer is connected to a domain?

  You can follow the steps mentioned in the link below

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/default.aspx/KB/947215

  You can follow the steps provided by Zaki J, Microsoft support engineer dated from Monday, November 23, 2009 02:49 , see the link below for the steps:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/8adbc6ac-64C5-4418-9223-95c92d2dc958

  Please post if you have any questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista before complete Edition and Windows 7 Ultimate is now creating a new office & this message "the location is not available.

  Dear Sir/Madam

  When I turned off my laptop and the switch once more, a problem occurs usually suddenly and my operating system "Vista Ultimate" done before and Windows 7 now do the same thing as well time and time again.

  The problem is often occurred when I start my PC which is the operating system attempts to create a new different OFFICE that is completely different to my usual DESKTOP with this message:

  (The location is not available)

  "C:\Windows\system32\config\systemprofile\Desktop refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. Make sure the office is inserted correctly, or that you are connected to the internet or your network, and then try again. If it can't be located, the information may have been moved to another location. »

  I did format three times and reinstalled my OS Vista and 7 and the problem still occurs. But sometimes, and after passing it off several times the problem disappears. But when my work of operating system there is no problem at all. That's my problem.

  Thanks in advance

  Elsharif

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Above is the link for the Windows 7 Forums.

  They will answer your questions of Win 7.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• the location does not contain the driver * for required processor architecture

  I'm trying to set up my hp laserjet as a shared printer on my network domestic. The printer is attached to a Win7 x 64 machine, all the other computers on my network are XP 32. When I try to load additional x 86 drivers on Win7 computer, I get the message: "the specified location does not contain the driver hp LaserJet 1320 PCL 5 for the architecture of processor required. I get this message, no matter which driver I try. I have tried several different choices of drivers XP 32. What I am doing wrong? where can I find the correct driver?

  Everyone,

  After the announcement yesterday, all of a sudden today, in Windows Update, there is a new driver PCL 6, Microsoft Update. I had to uninstall the printer in order to obtain this update to install. After this update, the shared property now would allow me to install the x 86 drivers. This update was not there yesterday, got to admit that Microsoft has acted quickly on this one.

  Brian & Jack thanks for trying to help!

  Ken

• Hard drive receives an error "Location is not available" in Vista

  I get a message that says:

  Location is not available

  Done C//Windows/system.32/contig/systemprofile/desktop refers to a location that is unavailable. It could be on a hard drive on this computer or on a network. check to make sure that the disk is properly inserted, or that you are connected to the internet or your network, and then try again. He remains found, the information could have been moved to a different location.

  So please tell me how I can fix that I know I've never touched the hard drive so I do not know how the drive would be irrelevant.

  http://www.Vistax64.com/general-discussion/106055-desktop-has-disappeared-Vista-Home-Basic-System-Restore-doesn ' t-help-all - boffins.html

  Read the response of Brink-Shawn at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Win 7 Sound recorder-audio recording device is not found

  New installation (new player) to Win 7 Premium 64-bit on Dell XPS 420 Quad Core Hiome.  When I run the sound recorder, it gives an error this audio recording device is not found.  Microphone is plugged into the front socket.  It worked with Vista.  I enabled see the disabled devices and devices disconnected sho.  Any ideas?  I also tried taking back mic.  I scanned for hardware changes.

  I did the things that you mentioned above:

  1.) method 1: Windows 7 responded that he could not identify the problem
  2.) method 2: check the show disabled devices and still no device appears.  He says still no audio device installed under the recording tab.
  3.) method 3: tried to update driver and reports of Win 7 I already have the most up to date driver

  Any ideas?

  There is really no other solution that a better driver for the device.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

  There are now 4 computers in front of me.

  Two are laptops 17 inch hp (consumer)

  Two are workstations mobile hp 17 inch (company)

  On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

  On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  This problem has been resolved.

  Right-click all methods have not access external external hard drives and flash drives.

  Sharing, permissions, ownership, administrative changes, all method all failed.

  This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

  The problem has been resolved by:

  (1) determine that he was not a NTFS problem

  (2) using the msconfig to isolate a single service

  When the unique service has been disabled the files on any external drives have been available.

  The service of the problem was the HP Client Security.

  This HP Client Security in its default value is set to deny access.

  Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

  When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

  I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

• Windows 7 network location are not accessible using browse folder

  In windows XP, the network locations added will be in my network in place. But in windows 7, the network locations that I've added will be in 'my computer '. But these network locations are not accessed by using the file browse some software. Thus, it became a problem now. I don't want to use the network card as it will add a drive letter in my computer. How do I add network locations so that it is accessible by using the option to browse the folder.

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the question, you aren't able to access the files within the network. I will definitely help you with this problem.

  I suggest you to check the following link to make sure that all parameters be so placed on your computer to share files within the network.

  Sharing of files and printers

  http://Windows.Microsoft.com/en-us/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_1

  I hope this helps. Try the above steps and get back to us for more assistance and with the requested details, if the problem is not resolved.

• Microphone not recognized "an audio recording device is not found."

  Original title: Microphone System

  Hiya,

  I am grateful to this avenue. Please, I'm using a Hp Pavilion g6, and the microphone does not work.

  Only, I discovered the problem about a week ago, when I tried recording via "sound recorder". It opens not cos it says "an audio recording device is not found."

  I tried upgrading audio drivers in Device Manager, but he says that they are up-to-date. When I right click on the speaker icon in the bar of tasks and open to recording devices, "no audio device is installed" is displayed under the disabled show the loggers tab. are active. The operating system is windows 8. Please, how can I solve this problem. Kindly guide me as if you are teaching how a toddler. Thank you

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I would like to know;

  1. What is the status of the microphone in Device Manager?
  2. Are there updates pending?

  The question can be caused either because of its pilot is missing, damaged, outdated or it could be a hardware problem.

  Please try these methods below to diagnose the cause of the road.

  Method 1: Run the troubleshooters.

  I suggest to connect the microphone in the same port and try to run these convenience store to diagnose the problem.

  Step 1: Run audio troubleshooter.

  You might be able to solve certain problems by running a convenience store will automatically fix some common problems with audio.

  Follow the steps to run the Troubleshooter:

  1. Press the keys Windows + C on your keyboard to show the charms bar.
  2. Troubleshooting type, and then click Troubleshooting under settings.
  3. Now select Search and solve problems.
  4. Select troubleshoot Audio playback.
  5. Follow the steps prompted to solve this problem.

  Step 2: Use the hardware troubleshooter.

  The convenience store is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  1. Connect the devices to the computer.
  2. Press Windows + W on the keyboard.
  3. Troubleshooting type in the "search" tab and press enter.
  4. Click on display all in the left panel.
  5. Click hardware and devices, new window will popup.
  6. Follow the instructions on the screen.

  If the problem persists, follow method 2.

  Method 2: Check the Microphone State.

  Check the status of the Microphone in the Device Manager and the steps to see the Microphone in Device Manager are:

  1. Press the Windows key on the keyboard.
  2. Type run.
  3. In run window type devmgmt.msc.
  4. In the search for a Device Manager window for Microphone.
  5. Check if there is no exclamation point on them or not.

  Method 3: Check the status of micro.

  1. Make a right click on the speaker icon at the bottom right of the taskbar.

  2. Check if the microphone is on it.

  3. If not, configure it.

  Let us know the results. Thanks for posting for further assistance, we'll be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Change in does not work, LR4.4 PS CS6

  Hello

  This weekend I wiped my computer clean and Im trying to reinstall everyting to work status.
  Installed LR4.
  Upgrade to LR4.4
  Installed Creative suite CS6.

  In LR, I see the option change to and PS.

  But its grey and unclickable.

  I'll upgrade to LR6, but I wasn't planning for it NOW.
  But if it does not solve the problem the opposite way, I will now consider doing.
  My biggest concern is to get Premiere Pro works with the eyes of the plural before Thursday.
  I really need that work with 4 cameras and 3 devices of sound recordning for a job.

  Best regards Erik Schalin

  Ha ha ha

  OMG

  Its much simpler than that.

  Disk drive letters changed.

  Of course he can not go to PS when the image has a broken link.

  Reset the drive letters did the trick.

  Thanks for trying to help.

  Feel a bit silly...

  / Erik

  2016-05-23 11:05 GMT + 02:00 Sharma assani [email protected]>:

  Change in does not work, LR4.4 PS CS6 created by Akash Sharma

  https://forums.Adobe.com/people/Akash+Sharma> in Photoshop Lightroom - view

  the discussion complete https://forums.adobe.com/message/8766498#8766498>

• Security location does not get updated in FDMEE

  Hello

  I've created several sites and several users. Post that I posted moyen2 to these users of shared services.

  After this FDMEE, I have provided roles, then security location that I assigned intermediate 2, post I created groups of users and respective users added to these groups.

  Result: Users are able to connect to FDMEE and are able to see everything that has been attributed to their role, but no details as location rule of data name of location etc...

  Initially, it seems fine for me.

  I noticed that your suffix matches the name of the location...

  can you change the suffix and re-create the groups using a new suffix that does not match the name of the location? You can delete the previous groups.

  Or, if you have a group where location is not the same as the suffix, you can try logging with the user in this group?

  I just want to confirm if it all bug/questions when the location name is equal to the suffix.

  Concerning

• I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  I had to reset my computer and now I am unable to install Photoshop elements 12.0. I have the record, but can not find where to install

  Hello

  Please Photoshop elements help | Download Photoshop Elements | 10, 11, 12, 13

  Hope that helps!

  Kind regards

  Sheena