GPU or motherboard is dead? Inspiron 1564

Hello

I came back to my pc, after being on sleep mode for about 30 minutes, after a few minutes, I noticed a few screen problems, flicks to black and then a sort of recovery message appears with text something like "your GPU recovered from an unexpected error. This happened once or twice more in a few minutes. Then I rebooted the computer, but after that it was the same thing. After restart of second time screen started flickering with different color lines, these lines covered entire screen.

Now when I try to turn on the pc screen just stays black, it turns. But everything else seems to work, fan, CD-ROM and CPU, judging from the sounds are ok.

I even got a VGA monitor plugged into my laptop, it shows that these same colored lines.

What can this be, GPU or motherboard? I had screen, HARD drive, keyboard, I think the motherboard changed too on this laptop. It seems to break every once in awhile. The GPU is Ati Mobility Radeon 5450.

Any ideas would be appreciated. Hope I explained it's understandable.

On this model, the GPU is part of the motherboard, so there is no distinction - when two breaks down, the motherboard should be replaced.

Tags: Dell Laptop

Similar Questions

  • My cell phone rings when turned on DELL INSPIRON 1564

    Hello

    My laptop gets a continuous (like beep beep) when beep irritated his turned on very audible sound and is

    This is exactly when the dell logo is turned on and it stops for a few seconds and comes again for 2 to 5 seconds on the windows logo any solution is needed really very irritating sound... the sound started for about 15 days and continues, but before that he came two or three times within a period of 6 months

    Sorry for my bad English, but please give me a solution I tried the Diagnostics and found everything was perfect

    Here are the beep codes for the model Inspiron 1564:

    One, motherboard Possible failure - BIOS ROM checksum
    Two RAM not detected - NOTE: If you installed or replaced the memory card, make sure that the memory is installed correctly.
    Three Possible - Chipset error motherboard failure
    Four RAM read/write failure
    Five, the real time clock failure
    Six, card failure, or video chip
    Seven, processor failure
    Eight, failure of the display

  • I have a compaq presario sr19090uk desktop pc, and the motherboard was dead. :(

    I have a compaq presario sr19090uk desktop pc running windows 7 64-bit with a card mother micro-ATX (ASUS - A8M2N - LA / Nodus M-GL8E) Socket AM2, Anthlon 64 3500 + socket 939and the motherboard was dead. What is a good replacement that takes in charge a cd/dvd ide burner and sata hard drive for undeer £100. I have also 4 GB DDR2 SDRAM installed.

    Thank you

    Tony

    Here are the specifications of your Compaq Presario SR1909UK desktop and it is card mother A8M2N-(NodusM). There is a conflict in the two specifications for what CPU socket is actually used. The computer specifications claim a socket 939 CPU, while the motherboard plug State she has a socket AM2. You will need to examine your system to confirm what type of CPU and socket he did.

    It can be difficult to locate a market after motherboard that will meet your needs as AM2 socket 939 about 5 years to 8 years and are several obsolete generation. Check e - Bay or similar in your area for a replacement card which meets you the specifications. Please keep in mind is likely to replace the HP OEM Board on your computer Windows become a "non-genuine" and require the purchase of a new operating system. Note that the recovery discs you created will not be also usable on your computer.

  • Dell Inspiron 1564 plugged in, does not support

    Someone knows something about the Dell Inspiron 1564 which does not load when it's plugged in?


    Moved from Hotmail

    Hello

    What operating system is installed on the laptop?

    I suggest you check the connections, connect it correctly or contact Dell also refer to this link.

    If you have a spare power adapter only to login and check.

    I suggest you to refer to the articles and check if it helps:

    Solutions to common battery problems

    http://Windows.Microsoft.com/en-in/Windows7/solutions-to-common-battery-problems

    Taking care of your laptop battery

    http://Windows.Microsoft.com/en-in/Windows7/taking-care-of-your-laptop-battery

    It will be useful.

  • Battery, not supported by the system and the display driver stopped responding with Dell Inspiron 1564 laptop

    Hello

    I had my laptop dell inspiron 1564 about two months ago and today when I turned on my laptop a message appeared on the screen the battery is not supported by the system . Can someone guide me through this question please?

    I have another question as well... the second day of my purchase of this product, that the screen is empty, n when I tried to turn on the key to the power of the laptop, a message appeared that the display driver has stopped responding earlier and it happened recently in a few days back as well. I will be very happy if someone can help me please on these two problems. In the hope of a solution in due course.

    Thank you

    Amira.

    2 months old?

    It is under warranty.

    Contact Dell and file a claim of guarantee on their records. as it may be the precursor of coming problems with it.

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

    See you soon.

    Mick Murphy - Microsoft partner

  • SSD SATA 3 in Inspiron 1564

    Hello

    I decided to replace the factory WD 500 GB ATA disk with an OCZ Agility 3 SATA 3 240 GB SSD in my Inspiron 1564 laptop.

    I know, the laptop does not support SATA 3, so I expect to lower speed performance but how much lower?

    I mean, going to e/s all be faster or it's a total waste of money?

    FYI, I am Windows 7 64 bit and I work with Visual Studio 2010 and SQL Server 2008, most of the time (which means a lot of IO activity).

    Please, any response is appreciated the most.

    Hi dimpant,

    Inspiron 1564 supports SATA 2 drives and is the maximum speed of 2 SATA 3 Gbit/s. The SSD performance would be better than the hard drive.

  • Problems with Dell Factory Image Restore - Dell Inspiron 1564 - Windows 7 Home Premium

    Hello

    My laptop (Dell Inspiron 1564 - Windows 7 Home Premium) slowed down a few days ago and I decided to restore the system to Dell Factory Image. The process started but stopped at most of halfway and gave the following message: "unable to apply the Image. I rebooted the system, but it would now not start, not even in safe mode! Perhaps, during the process of restoring a few essential Windows files have been erased.

    I want to restore the Image of Dell and can not reinstall Windows because I lost the product key of my Windows 7 original installation DVD provided by Dell at the time of the purchase of the laptop. Your help / advice is solicited and would be much appreciated.

    Thank you.

    P.S. The system recovery Partition is intact and has factory.wim and other related directories / files intact.

    If you use the Windows 7 Home Premium DVD Dell reinstallation it will automatically apply the Dell OEM SLP activation. In short, a product key is entered from the DVD and active if and only if the BIOS is validated by Dell to perform Windows 7. Therefore, you do not have the key 25-digit number on the certificate of authenticity. If you want to know the code then look under the battery.

    See here for more details:

    http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-7/Windows-7-installation/

  • Upgrade of the disk (DELL Inspiron 1564)

    I have been using Dell Inspiron 1564 (core i5 & 2.27 GHz, RAM: 2 GB) for the past two years. It's HARD is 320 GB disk which doesn't seem to be enough for me. So, I decided to increase the 1 TB HARD drive.

    1. is it possible to increase the capacity with the existing configuration of laptop? Or what is the maximum limit that can be added with my laptop?

    2. it degrade performance?

    3. should I need to increase the RAM as well? If so, what might be a suitable configuration.

    4. I learned that the HARD drive has 2 slots. So can I add additional HDD with the existing in another location?

    It would really help if you will guide me so that I can buy the right configuration. Thanks in advance.

    -Saadi

    Hi Saadi,

    You can replace your existing hard drive by any laptop (2.5 ") SATA hard drive. Your system does not support two hard drives, so the only option is replacement. This will not affect performance, nor do you need to add more RAM.

  • Inspiron 1564 video problem

    Hello

    I am running windows 8.1 on my Dell Inspiron 1564 i3. I downloaded the video drivers from the dell product support page and I tried to install the video driver, but installation does not begin with the error "this computer does not have the minimum requirements for installing the software. Is there a fix/way/trick to install the video driver on windows 8.1?

    Thanks in advance,

    Oscar

    Hello

    Thanks for joining us.

    Given that the Inspiron 1564 was never delivered with Windows 8 or 8.1 of the factory, we do not have the compatible drivers for these operating systems.

    However, you try to install the video drivers Intel or AMD Web sites according to the graphics card, have you in your laptop. It should cross fine without any errors.

    Thank you

  • Problem Inspiron 1564 and 5.1 sound

    Hi Dell Community,

    I found that my Inspiron 1564 Map 5.1 sound (pls correct me if m wrong) but is 2.1 mm (for headset only)

    How can I connect the laptop with System 5.1 speakers?

    I hope you have a solution. Thank you

    It's interesting. I checked in my device manager and all the devices I have to the title of her also said video game controller lower Logo Version 5.1. My integrated audio controller is IDT, not Realtek, but it is only 2 channels like yours, so I don't think that "5.1" means something of practical use. I googled "Lower Logo Version" but couldn't find what it means. It doesn't really matter because you cannot connect your system 5.1 speakers to your laptop due to not having the ports for it.

  • Windows 8 ot Dell Inspiron 1564 bluetooth problem

    My Dell Insiron 1564 cannot detect bluetooth. I tried with the drivers from dell for Dell inspiron 1564, but I can not install them. I also tried some tips with other drivers, but I could not install either. Could you please help me. Thank you!

    Same problem, I got Windows 8 '64-bit' o/s,.
    solution is to use the Bluetooth driver ("R235168")

    Steps to follow:

    ----------
    (1) go to the URL http://dell.to/S3vwvD the 'R235168' download) Bluetooth Driver and remove it.

    (2) open the folder after that extraction is complete.

    3) navigate to the folder until the folder as \r235168\r235168, for me the path is C:\dell\drivers\R235168\R235168.

    (4) open the folder (Win 32 or Win 64) depending on your configuration of file system of windows, for me, Win 64.

    (5) open the file 'Inst.exe', a full install with the wizard.

    Results:

    ------------

    The driver is correctly installed and running (I used and works perfectly)

    Thanks to DELL-Marjoram N & Saturn865

  • Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

    I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

    I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

    Uhm... I think the issue here is a misunderstanding of what you watch.

    If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

    You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

    New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

    • \USERS\\Desktop\
    • \USERS\\Downloads\
    • \USERS\\Favorites\
    • \USERS\\Documents\
    • \USERS\\Music\
    • \USERS\\Pictures\
    • \USERS\\Videos\

    ... etc...

    Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

  • My motherboard is dead and I need to replace my drive system as well as

    My motherboard is dead and I need to replace it. Unfortunately, this will be a completely different map (brand and model).

    My old system drive is IDE but the MB will not accept imput without an IDE interface card.

    I have the interface card, but don't think it will work to re - install through this forum

    I have a (relatively) new SATA I don't mind that I can install the operating system (windows 7 pro) now, but here the reformatting is trapped. How can I transfer all installed programs and settings from the old system to the new system disk drive after that I re - install windows

    Cannot create a new image or anything of that nature that the system is dead.

    I have backups, but not too recent

    You will need to reinstall your programs and drivers for other devices, you cannot be transferred.

    You can recover your data by installing the hard disk in a 3.5 external USB box and copy your files. Connect it to your computer then take possession of the files in your account folder in the directory of the user on the old disk.

    Take ownership of files and folders:

    How to: Make a file/folder in Windows 7

    Amazon.com: New 3.5external HDD hard drive USB enclosure 2.0

    If it is a portable hard drive:

    DX - SATAUSB 2.0 HDD case 2.5
  • Buetooth driver installs in the window 8 on laptop dell inspiron 1564

    I have Dell Inspiron 1564 laptop but Bluetooth is not indicated in window 8 while he showed in the window 7 driver installation, is not in the window 8 they say compatibility problem, I have tried several ways but not able to install the Bluetooth driver. in window 8. I also check BIOS showing Bluetooth is on, but not found in window 8

    Try to download the driver that is compatible with Windows 7 on your Windows 8 of the Dell Web site.

    Please report this problem to Dell support.

    Take a look at the Troubleshooting of hardware on Windows 8 compatibility issues

  • My motherboard is dead on my old computer.

    Because of my motherboard failure, I can not reactive windows xp on my new computer.  It is said that the product key is not valid. What should I do?

    If it's an OEM license, the license is dead when your mother did. A new Board of Directors is considered to be a new computer you can actually buy a license for it.

    I hope this helps.

Maybe you are looking for

  • SatPro A10 - wireless network card is not recognized

    I recently bought a wifi minipci card for my A10. After installing the card I have powerd up and the card was not recognized by windows, which is nothing to add material etc.I am running XP Home Edition with service pack 1, and I don't think that the

  • Synchronization of multiple FPGA PID loops

    Hello I am the design of a PID controller for each of the three axes (X, Y and Z) of a piezoelectric stage using the FPGA module and a cRIO. I used the example of project "Using Discrete PID - cRIO.lvproj" (labview\examples\control\pid\fpga.llb\Compa

  • HP Compaq nc 6120 laptop

    Is it possible to replace the module of 512 MB 333 Mhz memory with a memory module 1 gb 666 Mhz in a Compaq 6120?

  • Upgrading to a new palm pilot

    My Tungsten E Palm Pilot is ready to expire. I am looking for a product that connects seamlessly with the data of the tungsten e. Any suggestions?

  • Controller SCSI Raid ESXi 5.5 recommendation

    I'm moving the ESXi 5.5 to another server by using the following:Server Dell R610 with 12G of ram and a Dell PowerVaul 220 s Raid 5 with 12, space 1, 5 - T HD sataThe Raid Controller is a Intel SRCU42E Ultra320 SCSI PCI-Express X 8 with ext 2 x 68pin