My motherboard is dead and I need to replace my drive system as well as

Similar Questions

• Portege Z830 - screen broke and I need to replace

  Hello

  I have Toshiba Portege z830. My screen broke and I need to replace it.

  Is it possible to install an IPS display instead of the original LTN133AT25-601? What IPS screen is compatible with LTN133AT25-601?

  Hello

  The original LCD that has been used in Z830 was a 13.3 TFT color LCD "(HD) 1366 x 768."
  So if you want to use any other presentation, then you should pay attention to the size of the screen and the connectors.
  I think these are the most important key elements.

• Satellite A65-S126: I get error codes 7 and 4 - need to replace the internal RAM

  I was making mistakes first when I boot.
  Windows has a file missing or currupted (isapnp.sys).
  So I try to make a startup disk XP repair and while it is endearing to copy files, I receive other errror ' blah blah error code is 7 or 4.

  I did some research on all three errors and every difficulty unique potintial ram bad or bad Bios settings. I tried to reset the cmos and I've updated since the last version of toshiba. Always the same thing.

  I also replaced the ram with two sticks, that I had. The same problem. I think there must be some on board the cause of ram that I can get out the chip from the bottom and the laptop will always start and says it has installed 256.

  Where and how we replace RAM or what do you think?

  Thank you.

  Have you tested the memory? You can use Memtest www.memtest.org which is a floppy disk or a CD.

  Perhaps the error is just guessing what the problem is. File copy errors can also be caused by a scratched or damaged CD, bad CPU, defective HARD drive, faulty DVD drive or motherboard. If Memtest passes, then test the hard drive for bad sectors.

• Should put it? and I need to replace the CPU? HP6200 + ASUS RADEON R9 280 ALBUMS 3GB PCI-E

  Hello

  I have HP6200, CPU = 3.1 Ghz i5, memory = 4 GB, operating system: WIn7 32 bit

  I think it's format microtour and he have 320 Watt power supply.

  My question is:

  (1) will be the graphics card made the case?

  (2) I need to replace the power supply? If I do, this power supply I need? this case fits any brand?

  Thank you

  Guy

  Thank you for the additional information.

  Here is the guide to care and maintenance for the computer.

  I don't think that the video card will return in the space provided.  It is 11.2 "in length.  It would take a case full size so that it can adapt.

  With respect to the power supply (PSU), I can't say the plug if it is a standard ATX.  You can measure the existing PSU and compare it to the one you want to buy.  You will certainly need to upgrade if you replace the video card.  Most newer cards of mid-level require at least 400W to work properly.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• 5530 Evvy replaced printer - need to replace the driver and software?

  Hello

  Recently, I had to feel my 5530 all-in-One printer replaced while it was still under warranty. The replacement came with new driver software and everything, but since it is the same model that I decided not to install it and use the existing driver installed on computers instead. (Replacement not be come with directions for uninstall, said by the way.)

  The new printer is connected to the wireless network (using touch screen) and is recognized by computers on the network, but I can't get anything to print, since the existing driver HP software does not seem to 'find' the printer. Do I still need to uninstall the driver and reinstall? And what about the other programs installed with HP printer?

  The computers are all Windows 7 64 bit.  I'm not very technical, so it makes me a little nervous.

  Thanks for any help you can give.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• My Apple Watch broke last week and I need to replace it as soon as POSSIBLE, technical support has expired but the coverage of active services

  My Apple Watch broke week last series only. FH * JC, I need to replace it as soon as POSSIBLE, the technical support has expired but the coverage of active services.

  Thank you

  < published by host >

  Contact Apple support (mail service may be available) or make a booking Genius Bar to make arrangements for your watch serviced (warranty, if it qualifies):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• Need to replace Vista drive

  I have windows vista basic key on my computer compaq laptop

  I want the botable operating system

  HP/Compaq has provided you a method to create physical recovery disks in case the hard drive needs to be replaced or the factory restore image is somewhat damaged. Look in your start > all programs Menu of the utility. If you have not created physical disks and/or damaged recovery the recovery image and now need to restore factory, contact HP technical support to order a set recovery disk. It is normally very expensive, around $20-25.

  If you want just a bootable Vista (not a complete OS install DVD) repair disk, youcan make a bootable DVD to repair Vista from the file at this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  With the HP/Compaq computers, it is always better to use the recovery discs to restore your computer if you plant. However, if for some reason, you want a full Vista installation DVD, you will need to purchase a. You can probably still buy Vista at Amazon.com or Newegg.com.

  MS - MVP - Elephant Boy computers - don't panic!

• Hibernation and standby disappear after replacing hard drive

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: recently replaced a hard drive to 120 GB (IDE) with a 1 TB drive (SATA) on an E-Machines T-3516 under Windows XP SP3.  Lost my hibernation functions and the day before. Tried to determine if support system put into hibernation using the command instructions powercfg / has.  He said hibernation is not supported.  But the system used to support the hibernation before the swap disk.  The only material that I've changed is the hard drive.  Any ideas what has changed and how do I get hibenation/standby?  Thanks in advance.   Steve :-)

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  When you replaced your hard drive you reinstall your video driver? Check your device for red or yellow symbol Manager. You could be on the VGA mode. If you need to install the driver go to the manufacturer's Web site and download the latest version of the Vista-specific driver.

  How to disable and re-enable hibernation on a computer that is running Windows

  http://support.Microsoft.com/kb/920730

  To allow the Hibernate, follow these steps:

  1. Click Startand type cmd in the box start the search .
  2. In the search results list, right-click guest, and then clickrun as administrator.
  3. When you are prompted by user account control, click continue.
  4. At the command prompt, type powercfg.exe / hibernate on and then press ENTER.
  5. Type exit and press ENTER to close the command prompt window

  I hope I could help

• Need a replacement hard drive

  I have urgent need to replace the SAMSUNG HM500JI ATA disk in my Studio 1555 laptop.

  The diagnosis of 'My Dell' tells me that a hard disk failure is imminent.

  The problem is that I have not been able to find a like-for-like replacement.

  Can anyone recommend a reliable alternative to the HM500JI that will work with my 1555?

  Thank you.

  Thanks for the advice Osprey4.

  I went for a Toshiba MQ01ABD050.

  Change the disks in place was simple: I followed the video of PartsPeople (?) on YouTube.

  Recover the disk image was simple using Macrium Reflect.

  The whole process takes less than an hour and I was good to go.

  Thank you

   

   

   

• Need a replacement dvd drive cd

  Hello

  I hope someone can help out me cause research that does not have internet. I need to replace my burner CD DVD on my Hp Pavilion Dv7. can someone help me with this.

  Thank you

  Hello

  The reader of CD/DVD of HP Partsurfer replacing is on the link below.

  CD/DVD drive

  A good example of how to replace the drive can be accessed below.

• Need to replace the drive but not allowing OpenManage not not fault reader must be set to 'offline '.

  Hello

  We hope a quick and easy solution to what I'm procrastinating at the moment.

  Have a server Poweredge 1800 (PERC 4/SC, RAID5) and got a failure on one of the SCSI drives. It's hot and we got the replacement.

  However, OpenManage is not let me put the failed drive to 'offline' so that I can share. I'll choose the option offline in the menu drop down and when running it just empty screens (see photo). Is this a symptom of something not quite right? No problem with other options (blink/unblink).

  If not can I just start in the PERC menu, set the active player in offline mode, swap, set the new drive to rebuild from there?

  Seems to be a split view when I look at other similar questions on other threads in forum, for example, some say that you should just pull the drive and Exchange even without putting off line first.

  Thank you

  Alex

  

  Alex,

  It is possible that you are using an older version of the OMSA or that the controller is out of date.

  With the drive is not going offline. What you can do is to the server once it is off, then remove the disc. Powered with nothing in this niche, the table should show that degraded. Insert the replacement drive and it should start to rebuild.

  Let me know how it goes.

• Need to replace hard drive fault but I RnR records

  The hard drive has begun to fail on my brand-new T500 with WIn7 Pro pre-installed. I don't have time to create discs of RnR. Support of Lenovo said they are ready to ship a new hard drive, but there is a problem getting the RnR disks set up with the drive for me. When the player started to fail, I tried to create a DVD of RnR, but it seemed to go nowhere.  I got 1 DVD created what I was told to the "Final SP" label. What is c?  There is next to no information available describing the process, but I want to take another crack at it in case there is a significant delay in Lenovo replace my drive and providing records of RnR.  No idea how long it should take and how many DVDs? Any suggestions?

  Thank you.

  Ok. I took another look and I think I've found that I have to create the rescue disks... I don't know how I missed the first time around.  I'll give it a shot.

• Hi guys my old computer is dead and I need to re - install my Indesign CS6?

  need to re - install Indesign CS6 on my computers and can't find the right link

  Download the CS6 products

• My HARD drive is dead and I need another copy of Windows XP Edition family. __

  I wonder if there is a way I can download another copy of Windows XP for my laptop, if I have the product key from COA sticker on the bottom of things.  Anyone know if this is possible?  Is there a link I can go?  Thank you.

  I'm sorry, but it is not possible to download Windows XP.  Contact your computer manufacturer and request a Windows XP installation for your model computer disc. Boulder computer Maven
  Most Microsoft Valuable Professional

• my laptop often just to cancel and have to restart, my battery is still dead and changing needs, this might be a reason for making it happen?

  Hi, my laptop is a sony vaio vgn-fz11s, has been updated to windows 7 Vista a year or more ago, this problem has recently started doing this, such mentioned in the battery is exhausted, I don't know if this could be a link to this problem.

  Hi Pete,.

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, you are having problems with the laptop turns off.

  Yes, the problem may occur if the battery malfunctions.

  Click on the link below and see if it helps.

  Solutions to common battery problems (Windows 7)

  Answer to us if you are having problems with the performance of the laptop or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.