Grand Ages: Rome has stopped working

Similar Questions

• Satellite M500 - CD Rom has stopped working

  MY CD ROM for the M500 stopped working.
  DVD is still okay.

  Help?

  If the optical disc drive can only read DVD and there is problem with the CD there must be technical problem. Objective can be calibrated for CD playback.

  In this case, optical disc drive must be replaced.

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.

• Age of Empires 3 won't play, when I try to play it says that age of Empires 3 has stopped working...

  After I installed the game and went to play it says this: Age of Empires 3 has stopped working

  Windows can check online for a solution to the problem (nothing ever)
  Signature of the problem:

  Problem event name: APPCRASH

  Application name: age3.exe

  Application version: 4.107.803.3365

  Application timestamp: b 46, 74385

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7601.17725

  Timestamp of Module error: 4ec49b8f

  Exception code: c0000005

  Exception offset: 0002e066

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information 1: 9d8b

  More information 2: 9d8bb68627d5057dcfc9031adc89b429

  Additional information 3: b294

  Additional information 4: b294cc53ed8ac6b04fca06274c0f057a
  This means, which is fixable and what should I do? Someone help me please!

  Hello

  ·         What operating system is installed on your computer?

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         What is the accurate and complete error message?

  If you use Windows 7, then Age of Empires 3 is not listed in the Windows 7 Compatibility Center. You can check the link:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Microsoft%20Age%20Of%20Empires%20III&v=Microsoft&UID=1&l=en&pf=0&PI=1&s=age%20Of%20empires%203&OS=64-bit

  I suggest you to uninstall Age of Empire 3 of the computer and to install the game in compatibility mode and check if the problem persists. Follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/303032

  Method 2:

  If the previous step fails, follow these steps:

  Step 1:

  Uninstall Age of Empires 3 follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 2:

  After above step, install Age of Empires in compatibility mode and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• URU Ages Beyond Myst gives "UruSetup.exe has stopped working".

  URU Ages Beyond Myst gives "UruSetup.exe has stopped working". I reloaded the program 3 times and downloaded a patch that I found. You help?  It is a program of Ubisoft. I have just upgraded to Windows 7 last week.

  Dale,
  I've never played Myst so I'm not familiar with his game.  However if you are looking for a style of game Myst can do a Bing search engine and you will find a large number of recommendations.  Just make sure that you check the title on the Windows 7 Compatibility Center.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio G15-AV501 has stopped working

  My Qosmio G15-Av501 has stopped working after only 14 months of service. I was informed by repairers Toshibas that the graphics card has failed and it will require a payment of 512 gbp to fix. Since I have 3 other notebooks of 16 inches that have been in service without problem in my studio of photography for 5 years - I'm obviously not very happy about that - probably a graphics card cannot cost as much in this day and age?

  Does anyone else have experiences like this?

  [Edited by: admin on January 31, 2007 07:40]

  Hi, Geoffrey

  It s still a very stupid situation if a device like a laptop computer malfunctioning.
  But believe me, something like this can always happen

  My old laptop works very well for 5 years but my brother's mobile died after 5 months of use.
  Why? No one will be able to answer these questions...
  You know, these are high-tech devices, and each small part could cause problems.

  Laptop graphics cards are not the same as desktop graphics cards and therefore more expensive.
  This is why I always recommend buying an extended warranty. The usual guarantee lasts 2 years (after the recording of the laptop) and covers these repairs.

  It is perhaps a good idea for the future of s

• PX Engine has stopped working properly

  Hello

  Yesterday, I turned my computer off and the next morning, when I first started this new next IE opening the page automatically:

  http://WER.Microsoft.com/responses/response.aspx/17604/en-GB/5.1.2600.2.00010300.3.0?SGD=019a5517-6c13-4507-a7a5-cf09b6fd7470

  By saying:

  Download updates for has stopped working properly. To resolve this problem, see the software Roxio Web site to download and install the update: Click here for online access to the Web site for the Roxio software update instructions And when you click on the link, has been redirected to the following Web site:   http://KB.Roxio.com/search.aspx?url=/content/KB/General%20Information/000070GN¶ms By saying: PX engine - Description and download Knowledge base article: 000070GN.   Print this Article   Question Describes the PX engine and where to download them. Resolution Engine PX Roxio/Sonic Solutions, is what allows to burn and compatibility of optical media such as CDs and DVDs. An update of PX engine guarantees full compatibility with the latest players and media. Each new version of the PX engine is backward compatible with all previous versions of the Sonic Software and most of the Roxio software. Here is a list of compatible software titles: Easy Media Creator 7.5 and liked VideoWave 8 and higher MyDVD - all versions RecordNow - all versions DVD for Photostory DVDit - all versions BackUp MyPC - all versions Simple BackUp - all versions Download: Engine PX 4.18.16a (updated 8.18.09) To install the PX engine update: Download the latest version here on your desktop. Unzip the file. Double-click on the .exe installer and follow the instructions on the screen. Note: The PX Engine Setup may require a restart after the installation.

  So, it is a fake website, or is it ok? I'm a little worried, because I have a small Toshiba laptop with no CD/DVD-ROM. And to be honest, a few weeks ago I bought a Microsoft Office 2010 Professional Plus and had problems with the installation. Since then, I got the blue screen twice by saying me serious error. So, would be - that or else, I need to be aware of?

  Thanks in advance!

  Danielle

  ImgBurn does not use the PX engine,

  However other software may install it.

  For example, Winamp can install if you do not uncheck 'Sonic Ripping/ardent support' under 'Media engine' during installation

  I would say that it is safe to install the PX engine update if you're headed there by Windows Error Reporting.

  We could create a system first Restore Point.

  However, the PX engine update is unable to solve the problem.

• Exe to install Microsoft has stopped working.

  Hello. I'm running Windows Vista 64. I try to install the game of Microsoft Age of Empires 2 and the installation program runs completely towards the end, then the message ' Autorun/setup of Microsoft has stopped working. This happens when I try to install any game.

  I also waiting for updates to download and install, and everytime I try, it starts to install the update and then I get the same error at the end of the installation. I scanned my whole PC for any virus threats and found nothing. I also tried a "clean boot" as I saw suggested on these forums and that has not worked either. Any help would be appreciated.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  Sometimes other software, especially security type programs, can interfere with your facilities.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• WRT400N setup.exe has stopped working

  I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user

  OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now

• Windows Defender has stopped working properly

  When I turn on my laptop it user interface say that windows defender has stopped working properly, can not open windows defender to look at settings etc and since it has stopped working the computer guard stopping self to protect self, someone at - it ideas? It also came with "" error 0 x 80000003: one or more arguments are invalid '? "

  Hi richard.weeman,

  Try to restore your computer to a previous state of safe mode.

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer
  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
  3. ensure that the safe mode option is selected.
  4. press ENTER. The computer then begins to start in safe mode.

  Follow the instructions below to restore your computer to a previous state of safe mode.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. in the System Restore dialog box, click Next.
  3. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  4. click on finish.
  5. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  If this does not work, follow the instructions in the link below to perform clean boot in safe mode.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

  Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

  My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

  Hello
   
  ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
   
  In order to eliminate that your computer allows you to try these methods.
   
  Method 1:
   
  If it is installed in C:\Program Files, you can uninstall using programs and features.
   
  Do follow the link provided below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2:
   
  Try disabling Services "ArcSoft Connect Daemon" service before you start.
   
  To do that you must follow these steps:
   
  1. click on the Start button.
  2. type services.msc in the search field.
  3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
  Now, restart the computer and check if the problem is resolved.
   
  Method 3:
   
  If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
   
  For this you need to follow the links below.
   
  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301
   
  For cleaning and installation you can go to the link mentioned below:
   
  http://support.Microsoft.com/kb/923100
   
  Add this link to download the Windows install cleanup:
   
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Control Panel System Windows Explorer has stopped working

  When I press on the Control Panel, system, I get an error "Windows Explorer has stopped working" and then control panel stops. I get this error every time I have to perform this action. When I run my PC on Safe Mode, it works fine and I get no error and I'm able to run the options that appear when the 'Systems' option is selected. Other tasks in the control panel seem to work correctly.  I also noticed that I get similar messages "windows Explorer or the program has stopped working" periodically when I perform other tasks in internet explore, etc.

  I tried all the recommendations described in of KB/269949 and KB/929135 knowledge articles and many items in the Microsoft community, Microsoft and the Internet site. For example, update the video driver, auditor of file system (CFS), Virus scan, Mode safe, clean boot, memory RAM test, etc.. I also tried all the relevant actions I could think under the Microsoft Fix tool. Each of them has not solved the problem.

  I have a laptop Acer Aspire 5742 G with ATI Mobility Radeon HD 5470 with 8 GB of memory, running Windows 7 with all the latest updates installed, so all drivers have been updated. I also use the last IE 11 with all updates.

  If anyone knows a similar problem with Windows 7, Windows Explorer and Internet Explorer 11, or has a recommendation how to fix?

  Hi Ravi,

  This is an update to my problem. It might be useful to others with similar problems.

  My problem has not been resolved, but I decided to live with it. It was a difficult decision after a major disaster, I almost lost everything on my PC to try and solve the problem.

  I put the finger on the problem with the graphics ATI Mobility Radeon HD 5470 version 8.741.1.5000 dated dated 25/08/2010 driver. I noticed that when I check for an update using Control Panel, Device Manager, select the graphics card above and updates, windows comes back with a message indicating that it is the best available driver.

  I made the mistake to check the AMD website to see if there is a newer driver. According to their instructions and download their program, they recommended a more recent drive using the catalyst for AMD. The new driver is Version 14.301.1001.0 dated 15/09/2014 date. The same driver is also selected if I the Slimdrivers application user. With this new driver, the problem disappeared. In other words, I was able to use the Control Panel, System menu and access the submenus system without any problems. I thought I had solved the problem. I repeated the process and checked for the driver from the Windows Control Panel, Device Manager and look for the updates. Surprise. This review of windows update back to the original version of the 25/08/2010. The problem is back again. I repeated this process with re-installing Catalyst from AMD with the same results.

  However, I noticed that the AMD Catalyst, never finished the installation and the installation crashed. Updated the driver before it crashed.

  My major problem occurred when I tried to restart the PC with the new driver installed by AMD Catalyst. My PC and Windows would not start. He gave me a number of errors that the problem cannot be corrected. I tried all the solutions, Safe Mode, point to restore, System Restore and all the choices given in the articles from Microsoft. None of them worked.

  Finally, after many hours, days and nights that I was able to use an Acer recovery disk, I created when I bought the laptop. One on the Image worked system recovery options and I could get my PC to a more ancient date. The driver is the original edition of 2010 the year with the same problem.

  Therefore, I decided to live with the problem. I can access the submenus of system using startup and entering in the auxiliary system option in the search box. I wrote these submenus.

  WARNING TO OTHER USERS. DO NOT TRY to UPDATE THE ATI Mobility Radeon HD 5470, 8.741.1.5000 driver version dated 25/08/2010, using catalyst of MCDA.

  Furthermore, my assessment is that if I try to restore my PC to the factory default condition, once all windows updates are installed and I install my apps, the same problem will occur. If I did think I would lose a lot of useful applications, which I'm not sure that I can restore. I have a lot of useful data that I use for more than 20 years and I can't afford to lose their jobs. I would live with the problem until something more grand occurs. In this case, I would by a new laptop. I would make sure that there no AMD ATI products on this topic.

  Thanks again for the time. There is no reason to answer, unless as described above, you have seen something new.

• Windows Media Player closes whenever I open it with the message "Windows Media Player has stopped working"

  Hello

  I have a XC of Aspire Acer-605, i5 with Windows 8 (bought 4 weeks ago)

  When I open Windows Media Player 12, if I play music or not, in less than a minute, a box appears that says:

  "Windows Media Player has stopped working: a problem caused the blocking of the program works correctly." Windows will close the program and notify you if a solution is available.

  The only option then is to click on "close the program".

  When I try to listen to music on CyberLink Power Media Player 12. I have the pop box saying:

  "Play.exe stopped working: Please send us this report to help us solve the problem and improve this software."

  The option only two then are "CANCEL" or to type my email and the problem then click on 'send report '. I did the second and nothing heard back.

  XBOX media player works, but I don't want to use it.

  I already scanned with McFee virus and it found nothing. I recently remove a virus from my computer. The problems may have started after that.

  Can you help me to solve my problem?

  After days and days of the trial, an online chat with a technician Microsoft (which was useless) I finally found a suggestion that worked... I had to create a new user account with administrative privileges. Media worked perfectly in this new account! I then spent ages downloading the files from my old account before deleting completely. It took a long time and has been a real pain, but at least it works now :-). Good luck to all. I hope this works for you xx

• The dvd/cd device on my hp g62 has stopped working.

  The dvd/cd device on my hp g62 has stopped working. The message I get tells me that the configuration information is incomplete and reinstall the driver. I tried to reinstall the driver automatically, but the operation failed. I can't manually install driver because the only information I have on the manufacturer, it is what it is "Standard CD-ROM.

  Processor: i3 Intel (R) Core (TM)

  Operating system: Windows 7 64-bit

  Try clicking on the device in Device Manager and click on uninstall.  The device must be reinstalled on reboot.  Please post your complete model that is usually listed on the bottom of your laptop if it does not.

• Photoshop CS3 crashed and won't restart: "license for this product has stopped working".

  My copy of Photoshop CS3 on Mac OS / X Yosemite suddenly crashed during usage, and when I tried to restart, I got a pop-up that said "license for this product has stopped working." I tried (twice) to reinstall the CD-ROM by following the instructions, but it did not help. How can I solve this problem?

  I left the link in some way: start layout error opening Photoshop cs4 on Macbook Pro 150:30 with message 11.  Any questions, let me know.

  You will be running a script in the Terminal to fix the license.

  Leave a space after sudo python, and then drag the script in the window.

  When asked for your password, do not see the points or see the cursor to move. Enter it blind.