Graphic borders problem

If the background of graph(waveform/XYgraph) including the grid (major and minor) is set to white and his image of control is used in the report print top and left borders are filled with lines, while the bottom and right are not.can it be filled on all sides or can they be dismissed on all the sides.find the image attached to the chart image. Attached the vi is it.iIm using labVIEW 8.5.1

Simple

 

 

While trying to change the background colors, try to use the foreground as the transparent color and the background color white. I have it attached for your reference.

--------------------------------------------------------------------------

Subramanian. A

Engineer

CAPTRONIC systems

Tags: NI Software

Similar Questions

  • Qosmio G40-10 s: graphics card problem

    Hello.

    I have a Toshiba Qosmio G40 laptop 10s with a Nvidea 8600 M GT grafixs card. I was playing a game when it locked up and pasted what I would describe as flashing red/green 'Matrixy' search screen.

    He then a blue screen and trys to reeboot.
    He tries to start windows, but once again the top matrix. If it loads to the top, it is in 16 bit color with red dots all over the screen.

    I am sure that the GPU is fried... and I was wondering what I can do? It's been 5 months out of warranty now.

    I read on some forums that there have been a lot of problems with this Nvidea card... Is there anything I can do outside my warranty period with what there is a possibly faulty card in it from the beginning.

    It will cost a lot of money to get it repaired, but its too good a laptop to let go to waste.

    Any help is very appreciated.

    J

    Hello

    You also have these lines on an external monitor?
    If so, there seems to be a graphics card problem and it must be replaced.

    These overheating problems also occur if you use the nVidia display drivers directly. Toshiba drivers are pre-tested and don't overheat your system.

    But I think you need professional help. You should contact an authorized service provider and talk to the technicians. They will help you! :)

  • HP Pavilion P6 2055sc: Cant enter BIOS because graphic card problem.

    Hey!
    So for the moment, I try to turn on virtualization, I m able to boot the computer into windows but do not enter network boot (anti-spam f10 key before the HP loading screen) but because of the past problems, I struggle to get into the BIOS.
    It all started when I got a new (Asus Geforce GT740) graphics card and this caused my computer not being able to start, without forcing in the network boot.

    But like I said, when im trying to get into the BIOS, it gets to the screen where it says "Press Escape to access the Boot Menu" which, at that time, it ignores when I press ESC.

    I tried holding it, I tried all the keys F1 - F12, but nothing makes a difference, so im wondering if there is a way for me to get into the bios and work around this problem.
    I looked for so updates to the BIOS, but I couldn't find one so far.

    @alilleland, welcome to the forum.

    The reason for which the computer would not start with the GT installed 740 is, it requires UEFI in the motherboard instead of a standard BIOS.  If you always use the GT 740, I suggest to withdraw to see if you can enter in the Boot Menu.  You can do that by typing the ESC key as soon as the computer begins to start.

  • Pavilion dv6: graphic driver problems

    I recently updated my graphics drivers on the AMD website, which I did not know that at the time, did not fully support the laptop itself. After having done that, I had a problem with playback of videos where in certain circumstances the video would be black but audio would play again. I tried to uninstall the graphics driver that seems to resolve the video issue, but then none of my games would launch at all. Is there a way that I can return the graphic drivers for the basic version where I had not either of these issues?

    Hello:

    See if works by running system restore.

    Select a restore point created before you tried to update the graphics driver from AMD.

    If you are not familiar with how it works, please see the info on the link below.

    http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings

    If this does not work, reinstall the switchable graphics from AMD/Intel support page driver and the driver of your laptop.

    If you are uncertain which one that would be, please send the number of full model of your computer laptop dv6.

  • HP 250 G3: Graphic driver problem

    HI, this problem is literally driving me crazy: I recently bought a laptop very nice and cheap: HP 250 G3 professional laptop. The laptop was very cheap because it came without an operating system, but it was not a problem for me because I already had my own. Now, after I installed Windows 7 32 bit, I had and service pack 1, I went to the HP site to look for drivers, only to find out that they are only available for the 64-bit system. For some of the components, I managed to find the drivers online. However, I can not install those Intel HD graphics card. I tried everything, downloaded a lot of different versions of the driver, tried to install manually from the Device Manager, but all I can see there is the standard VGA and spare no effort to update did not work: the .exe file tells me that I have no required system, so that when I do it manually it tells me that the appropriate driver has been installed. In addition, the HP utility cannot detect any driver, chipset or anything like that. Please help me and tell me that the only way is to install a 64-bit version of the operating system, which sucks!

    There is only one driver in the world who might work, and it took me awhile to find it.

    This one... Download, unzip and run the exe to install.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23889

  • iMac 27 "late 2009 - graphic driver problem.

    OK, so this may have limited options in regard to the resolution, but need to try to reach out to the community.

    I have iMac above, which has the graphics processor ATI Radeon HD 4670 with 256 MB. Now, I recently tried to take advantage of this simple game of Minecraft on this system, with the default texture pack is no problem. However with a pack of resources more inflated, as conquest, which in earlier versions worked very well, but has since become larger and has become a problem. resulting in missing textures etc.

    These problems all seem to point to the outdated ATI drivers and even though I've updated to El Capitan, I still have problems with reliable graphics in the game Minecraft simple sandbox.

    Any help or pointers would be appreciated. Buy a new Mac is not an option, in South Africa, with current exchange rates and do not really want to make it back in the PC world as all devices in the House are Apple and I want to keep it like that.

    The video drivers are provided as part of the OS X. Minecraft is more demanding than you can imagine, you have simply not enough Mac to run the add ons.

  • On the Satellite 5200 903 graphics card problem

    Deploy a 5200-903 Toshiba Satellite. A few days ago, I have a problem with the display. All scratches and other
    unknown elements on the screen. It's the graphics card (FX GO5600). Read about it in other forums.

    My Question: Is it an embedded chart? And what do you think, is it profitable to change the broken component?
    I mean if the graphic is on board, I have to change the motherboard together.

    Thank you very much for your answers!

    Hello

    It's look like that there is a problem with a graphics card. Can you check connection of the external monitor to the laptop?
    The graphics card is integrated into the motherboard, therefore, you need to replace the whole motherboard.

    It is quite expensive, and sometimes it is better to buy the new computer

  • -Portege Z10t 13 V graphic driver problems and lag with W10

    Hello

    Please excuse my bad English,

    I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

    I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

    When I'm with W8, drivers are correctly updated...

    So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

    Thank you

    Thomas

    Hello Thomas,.

    EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
    I also took the same steps and encountered the same problems and no solution.
    I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
    Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
    -> Not happy with Toshiba!

  • Satellite L850 - cannot play Minecraft - graphics driver problem

    Hello

    I have a Satellite L850 with this specs: Intel Core i7 3630QM with an AMD Radeon HD7670M and 8 64-bit windows.
    I installed the latest drivers display amd by toshiba Web site and java 64 bit.

    Walker I launch Minecraft is as usual, but when I click on connection a black screen stands for awhile, then the failure Message screen comes and it means something like this:

    Bad video card drivers!

    Minecraft could not start because it did not find an accelerated OpenGL mode.

    Generally, this can be corrected by updating the video card drivers.

    So I hope that you are able to help me.
    I've already spent many hours to fix it, but nothing works
    :(

    In this game forum, you can find several discussions on the problems in playing Classic.
    All cases have been resolved by the update of the graphics card driver.

    To my knowledge, the driver of Toshiba page does not contain the OpenGL but DirectX (of Microsoft)

    Then maybe you will need to install the driver of an another 3rd party sources
    Your laptop supports the AMD (ATI) graphics chip?
    Well, in this case, you could test a driver of omegadrivers.net but the use of this driver is your own risk, don't know if it will work stable

  • Intel HD under LightWave 3D graphics card problem (dongled & licensed)

    It seems that graphics Intel hd graphics is a little difficult display my NewTek Lightwave 3D 3D interface.
    Indeed, even with the update "specifically" one dedicated Windows 7, well the "interface will appear, however, the orthodox view remains gray.
    To my knowledge, no installation problem, recognized dongle, only admitted entering the serial number correctly.
    Tell me know maybe handling the most appropriate to solve my problem of display.
    NewTek LightWave 9.6.1 can work with 64 MB dedicated memory.
    so maybe it would be good to allocate more memory to the graphics card?
    I don't know am not coders.
    Thank you very much for this information.

    The version pirated Lightwave 7 configuration running on a pentium2 277 mhz 32 MB of ram and graphics card s3 Virgin 4 MB.
    I do not really understand hardwares. ("_")

    After reading your ad I m wondering if you are on the right place here.
    Please don t get me wrong, but don't you think that your story has something to do with Toshiba laptops in general?

  • Satellite Pro A60: On startup graphics card problem

    Just got a Satellite Pro A60.
    Whenever it starts it stops and then restarts. It then works perfectly OK, even if restart you. But then if you start it once it is shut down for a few hours it crashes at startup upward again?
    Windows error report accusing the graphics driver ATI Radeon 7000 (see report below), but I've updated the graphics driver and still get the same problem.
    CAN ANYONE HELP?

    This is the error report:
    Error caused by ATI Graphics Driver: no specific solution found
    Description of the problem
    An unknown error has occurred in ATI Graphics Driver, created by ATI® Technologies, Inc.
    Resolution of problems
    ATI® Technologies, Inc. is currently not aware of a specific solution for the problem you reported. Here is a list of recommendations to take that may help prevent the problem does not happen.
    Download and install an ATI Graphics Driver Update from one of the following locations:
    o Windows Update
    o ATI® Technologies, Inc..
    If an updated driver is not available, check with your computer manufacturer.
    If you are running the latest version of the ATI graphic driver, please contact ATI Technologies, Inc.® for your support options.

    More information
    If this problem persists with the latest updates to ATI Graphics Driver, we strongly recommend that you obtain assistance and troubleshooting directly from ATI® Technologies, Inc. information.
    If you are not familiar with ATI Graphics Driver and you are questioning how the program was installed on your computer, it is possible that the program was installed with another program. If you don't know why ATI Graphics Driver is running, many programs configure themselves automatically starts whenever you turn on your computer.

    Hi Barry,.

    I'd be inclined to return your laptop to an authorized Service Agent Toshiba. The OEM software should not require all the updated drivers at this early stage of his life, and the unit will be well within its warranty period.

    The closer your repairman details can be found on the Toshiba site.

    HTH

  • Bootcamp day graphics driver problem "windows 10.

    On my Mac Pro 2013 (with 2015 D700 AMD graphics cards), Bootcamp (10 Windows up-to-date) running, I have problems with the update of the graphics driver this week Bootcamp.

    More precisely:

    * For reading "Star Wars: Battlefront" EA:

    * The game freezes sometimes when she used to never do.

    * Some non-action screens (for example, the dashboard after game) flicker badly.

    * Even after restart again once, graphic poster Apple software update program driver updates that I just installed successfully to be not yet installed.

    I hope that this problem is corrected, because I would like to unlock the power of the D700s dual AMD in this machine.   No foolin'

    Have you created a Windows system restore point before the upgrade? If so, restore and ignore the update until you get an updated version.

  • Satellite U400-157 - update of display graphics card problem

    Hi forum,

    I update my Toshiba (u400-157 model: psu44e) from vista to win7, the problem occurred when I tried to update my graphics display driver because it has been deleted when I did the upgrade.

    Then when I went to the toshiba support website I downloaded many drivers and it works fine but when I tried to download entry error message display driver graphic after having extracted the files and said (can't find script engine "VBScript" script "C:\Users\... etc".)

    Please help me solve this problem.
    I tried to update the driver through device win7 Manager and it works fine but when I used a cable hdmi to the TV, the sound did not work so I had to uninstall the new version and the system to reinstall the old and works perfectly.

    concerning

    Hello

    I have the same model of laptop, and to be honest, I didn't install the display driver because Win 7 install automatically the display driver and was able to get the latest update.
    So in my case, the installation of the new driver was not necessary.

    But have you tried the latest driver from Intel page?
    Try this!

  • Satellite Pro M30 - NVIDIA graphics controller problem

    Hello everyone

    I have a Toshiba Satellite Pro M30 with a Nvidia GeForce FX graphics controller. ([Image of the motherboard | http://i258.photobucket.com/albums/hh242/hardousss/PC3.jpg])

    My problem is when I turn on the PC and wait a few seconds red and white vertical stripes begins to appear on the LCD and it cannot go after the BIOS password screen. I can type the BIOS password but when I hit OK or button that ENTER the laptop freezes. ([See image 2 | http://i258.photobucket.com/albums/hh242/hardousss/PC2.jpg])

    In very rare occasions where the laptop was turned off for a long time, I listen to him on and he could overcome the BIOS password screen but freezes after a while: ([see Image 3 | http://i258.photobucket.com/albums/hh242/hardousss/PC1.jpg])

    I plugged it to an external monitor and nothing has changed.
    I removed the inverter (responsible for the lightning of the LCD screen) and the problem is still there.

    Always to blame the graphics chip from NVIDIA.
    I read here that it is not possible to replace them because they are soldered to the motherboard. But I want to, where can I get a laptop NVIDIA graphics chip. They sell somewhere?
    I have a friend who works in an electronics manufacturing company (SAGEM) and told me that they have the tools needed to replace any piece on any Board of Directors.

    Thanks in advance for any help.

    Hello, my friend

    I agree with you. It must be a faulty graphics card. I put t believe you can buy a graphics chip separately but you can buy mainboard used laptop on eBay. In my view, Exchange Board is no problem for you.

  • Tecra A9 XP-Pro/Graphics display problem - 11 M

    You just bought a Tecra A9 - 11 M running XP Pro. I can't go to Vista I use various industrial software packages that are not yet compatible. I have the following problems with graphic display:

    1. a lot of Web sites are not displayed correctly. Colored backgrounds etc often lack altiogether.
    2. when I compose an email in Outlook Express, the color of the text remains black no matter what color choose.
    3. when I type messages in Windows Live Messenger, the text appears in the color I chose that I type in, but then goes black after clicking the Enter key.
    4. when I use the graph editor in one of my industrial packages (Siemens Win - CC), if I try to change the color of an element to display the color palette appears empty as if it cannot display the colors.

    Paint and Wordpad, both work correctly in terms of colors.

    I use the default screen (1680 x 1050) and 32-bit color resolution. I tried different combinations of lower resolution and also change to 16-bit color, all to nothing will do. I tried to update the downloads of Toshiba display driver, but he sent the message that my pc does not have the minimum requirements for installation. Yet, everything works perfectly and there are tons of disk space and free ram. I also checked that mmy BIOS is the latest version. I am pleased with the machine in general, but at my wits end to know what to try next.

    > I tried to update the downloads of Toshiba display driver, but he sent the message that my pc does not have the minimum requirements for installation.

    Are you sure you used the right graphics driver?
    Have you used the download Toshiba pilot European page graphic driver FRO?

    It seems it s an Intel graphics card and you must use an Intel graphics driver.

    One question; the screen works properly without any installation of 3rd party applications?

    If Yes, then it s a software problem caused by 3rd party programs.
    The software is perhaps not fully compatible with the GPU from Intel or Intel shared graphics is not strong enough to manage the graphic editior

Maybe you are looking for

  • The computer hangs when copying the data on the hard drive

    * Problem *: My computer freezes whenever I have transfer large amounts_ of the data on the disc from my computer. * It doesn't have this problem with my C drive *. First detected this problem while I was transferring some data in LAN. This problem o

  • 7520: trying to re-establich HP 7520 USB connection

    I moved and want o connect the computer to the printer. The printer appears offline. The printer also appears greyed out: not active. Why the computer does not recognize the printer on-line. I don't want wi - fi, as I am waiting for a new internet co

  • Mouse Bluetooth T420 has stopped working

    Hello Suddenly, my Bluetooth mouse works today, I tried to reset. I took the battery and put it in to restart, didn't work. Click on the Bluetooth icon at the bottom of the windows, he says that the device works very well. Help, please. B

  • WebMonitor agent properties

    Hello could someone explain please to the understanding of the properties of the Webmonitor. According to my understanding of the screenshot, below webmonitor will collect data for every 5 minutes. But how does the quick mode will work here. Please,

  • How can I re - attach the data files for the programs?

    Original title: reconnection of the files BONE had to be reinstalled.  All data is saved but lost programs.  Programs now reinstalled, but how can I re - attach the data files for the programs?