Graphic problem IdeaPad S10

Similar Questions

• Sleep with the Ideapad S10-3 problem

  A week barely returned this Ideapad S10 - 3 to the initial state to overcome a problem with mode 'sleep', which has recurred just - worked well in sleep for a few days then back to this question - that's why this message - when I put the netbook to sleep by closing the lid, 2 left lights on the left front light & the system stops responding - only by holding the power button down to kill the system then by restarting the system that reboots can sleep (I put the hybrid sleep system on) extended is the problem solved.

  Ideas to make the system normally sleep?

  Hi pday12au,

  If you are running Windows 7 and Windows Update received before the problem, you can try to perform a system restore (click Start > type System Restore) and disable windows to automatically receive updates (click Start > type Windows Update > choose change settings on the left sablovaseuse) then watch the PC.

  If your system is entirely through Windows Update before the problem, try to apply this "standby" difficulty.

  I hope this helps.

• Ideapad S10 battery problem

  I have been using ideapad s10 for two years now... All of a sudden today, the power state shows "ON LINE". Earlier, it will display as "RELOAD".

  And also the remaining battery power is still 56 percent. It does increase not plugged. Can anyone suggest me a solution for this.

  This means that the battery is lose his life?

  Thanks in advance.

  Well Yes,.

  Remove the battery & remove power cord / adapter.

  Then hold the power button for 15 seconds continuously.

  reconnect the battery and AC-

  Empty static.

• XBMC about ideapad S10?

  Just got my ideapad S10 and I'm loving it.

  The only problem is that XBMC does not seem to want to get started.  It installs fine, but when I try to start nothing happens and it appears in the Task Manager (consuming 40% CPU) until I have killed him.

  Anyone successfully running XBMC on a S10?  If so, I would be very interested to hear how you got to work.

  Thank you.

  Mine works fine with nightly builds.

  http://sshcs.com/XBMC/

  The reason why I do not use the official version is because I have a minipcie Crystal HD Broadom decoder.  It works on all linux/osx/win7 operating systems.

  Good luck

• IdeaPad S10-3 does not start after windows updates 7

  Hi Experts,

  I have a laptop Ideapad S10-3 with WIndows 7. It was fine until I installed a few Windows-7 Updatss. Once the updates have been made, the system rebooted and after that it never started. I just get the first screen of Lenovo with the F2 and F12 options. Anything after that. If I press F2, it goes into the BIOS menu, but if I press the F12 option, and then nothing happens. I just see a black screen with the cursor blinking in the upper left corner. Can someone please help me get back system works again. Would be a great help.

  Thanks in advance.

  Kind regards

  Vijay

  Hello

  Thanks for the suggestions, but none of them worked. However, I could finally get my ideapad work as follows.

  As soon as the screen of Lenovo's Logo, press F2 to enter the boot menu. In the start menu, there is an option for the compatibility of the disk with AHCI options (or something similar) Compatible vs. I don't know what was before settings but in the condition of non-working, the setting was AHCI. I then changed to "Compatible" and restarted after the registration of the configuration. He then loaded windows.

  However, I do not how the setting changed on AHCI. Also in mode AHCI, my USB not detected. After I changed the compatibility mode, it detects and I was able to load Ubuntu from USB disk as well (as a book drive).

  Try if it can solve your problem in this scenario.

  Kind regards

  Vijay

• User profile ideapad S10-2 service

  Hello

  Please, someone help me.  I bought the Ideapad S10-2 in June and now I can't log on.  When you turn it on and try to connect it comes up with the following message: the service of failed the logon user profile service.  User profile cannot be loaded.  Is that what I should be able to sort myself or do I contact Lenovo?  I can still access the internet through the quick start.  Thank you very much

  trankin, welcome to the forum,

  I had a customer with the same problem yesterday. The solution is to start in safe mode, and then use windows system restore to recover to an earlier point. Thank God windows creates a restore point before installing updates, by choosing the point of restoration before the last batch of updates worked.

  Hope this helps

• Graphics problems in macOS Sierra on Macbook Pro

  I have a 13 "mid-2016 Macbook Pro (model MacbookPro 7.1 - 2.66 GHz/8 GB RAM) I've recently upgraded to Sierra. However, I noticed a slight increase in glitches since the upgrade - serious glitches. For example, the animation for arise Applications appears as two images, the majority of applications (including integrated) sparkle and on top of that, applications like Microsoft Remote Desktop and Parallels Pro 12 do not work right due to graphic problems (MS RD comes constantly creates an empty black window while in the analogies I was forced to power off the virtual machine dirty because all the options of the application itself that uses OS x) interface were flickering at which makes them unselectable).

  In fact, the graphics flickering and stuttering throughout what using Mac OS are quite widespread. Open a new window in Chrome, same thing. Same thing with Safari. Or iTunes.

  He got better with each subsequent reboot, but it is still pretty bad.

  Anyone else having this problem or have a resolution for this?

  He got better with each subsequent reboot, but it is still pretty bad.

  Keep rebooting until the problem is gone.

• Graphic problem of mission control

  Hi, I have an early 2013 MacBook Pro retina runs El Capitan 10.11.6

  Launch of Mission Control, there is a graphic problem: miniature Office are all gray, as you can see in the screenshot.

  I already tried to quit smoking Dock in activity monitor and running "killall Dock" in the Terminal. Restart the system, the problem persists.

  Any ideas?

  

  Hello GalaxyWorker,

  Thank you for using communities of Apple Support. It is my understanding that when you use the Mission control the thumbnails are gray. I often use in Mission control, so I know not being able to see the thumbnail of the available screens can be useful. I'm happy to help you to get this resolved with you.

  You did a great job trying to fix this problem yourself. First, I recommend that you test the problem in safe mode. Boot in safe mode allows your Mac perform certain controls, delete the cache and prevent the opening and start-up items to open automatically. Follow the steps below to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  Try safe mode if your Mac does not end commissioning

  If the problem does not occur in safe mode, but returns when you restart normally, try to disable the login items using the link below.
  OS X El Capitan: If you think you have incompatible connection points

  If the problem occurred then in safe mode, it is possible the user settings or files are the cause. In this case, please try the issue in a new user by following the instructions in the following link.
  How to test a question in another account on your Mac.

  Have a fantastic day!

• Qosmio X 870 - 13v - graphic problem steam L4D game - black shadow on the light

  Hello

  I play this game using 2 PC Toshiba laptop.

  A Satellite L670-1KZ: 2.67 Ghz - Radeon Mobility HD5650 - RAM 6 GB i5.
  A Qosmio X 870 - 13v: i7-3630QM 2.4 Ghz - GeForce GTX 670 M & Intel HD Graphics 4000 - 32 GB of RAM.

  On the 1st, I have no graphic problem.
  On the Qosmio, I have a BIG problem with little light that have large black stain on it.

  You can see the 'bug' on YT here below:

  https://www.YouTube.com/watch?v=c4E2DFScyfU&feature=youtu.be

  The configuration of the game is the same on both machines with the exception of the resolution.
  My drivers are up to date (GeForce & Intel).
  I uninstalled the game twice only = no results.
  Settings, to control panel Nvidia, I changed several times (Note option shadows cache) no = no results.
  I played with game config below only = no results.

  I posted on the forum of steam only = no response.
  I posted on the forum of Nvidia only = no response.

  So, can you help me solve this problem?

  With our thanks,
  Guillaume.

  You have any other graphic matter using this Qosmio X 870 - 13v?
  I mean other problems related to the image to appear in other games and other applications running?

  Otherwise I n t think that there is something wrong with the laptop.
  In this case, it looks like very specific issues between this game and probably the graphics driver.

  It turns out that you won't encounter problems under this game the Satellite L670 with ATI driver.
  The Qosmio is supported by the nVidia GPU

  I think there must be a link any between the nVidia GPU and this game.
  In my opinion you should look for the solution in the steam forums or nvidia even if you have not received answer yet.

• Graphics problems Tecra S1

  My S1 has graphic problems. There are horizontal and vertical smooth jerk on the LCD display and the same to the external display. Could you advise me please, how can I fix?

  I agree with Johnny. Seems to be a graphics card problem and this can be solved by the replacement of material.
  Johnny has already said, please contact the service partner in your country for assistance and additional handling!

  Good luck

• Satellite A660-1DW - screen graphic problem becomes faints

  Hi guys, this is the first time m write on any shape... !!

  Basically, I bought toshiba A660-1DW from argos 4 months after using it for 4 months VGA (display graphic problem becomes faints and a little colored lines appear on the screen)

  .. as I had the warranty for the laptop, I went to argos, told them the problem rather than send it back for repair they just have me service number customer toshiba...

  returned home rang Toshiba, they gave me a few REF a bit and asked me of the drop to the argos... the next day went to argos they accepted and send it to toshiba for repair... after 3 weeks they have me called yesterday picked up the phone after using the laptop for 5 minutes, same problem was there...

  then I took it back to argos they still accepted and send it for repair, but they also said if the problem 3rd time I'll have to take the same branch of argos from where I bought the laptop... .fondamentalement I bought in HOUNSLOW and I live in slough.

  the conclusion that I am crazy about her, here it is... TOSHIBA AND ARGOS these people got the WORST service you will ever find anywhere on the other hand,

  THESE PEOPLE ARE MUCH MORE BETTER THEN TOSHIBA because IF THE CUSTOMER IS NOT happy with the product they will replace or Exchange streight away...!

  Hello

  I had a problem with my laptop and the ASP has replaced everything for free because the guarantee was valid.
  The guys are really helpful and friendly, so I did a very good experience with the Toshiba service and notebooks of other manufacturers can also be defective

  Of course, there might be some difference between the different cases, but I can't say that the service is not ok

• IdeaPad S10 - 3 broken hinge

  The right hinge plastic my S10 - 3A laptop broke up without reason. I always close my netbook correctly and always take care of it. This netbook has been with me for almost 2 years already. What will happen if I didn't not my laptop for repair? Is there a way to fix without spending too much, I mean it's just a hinge. I have read other forums that could fix that part cost about $300.

  Unbeatable salvation.

  Welcome to the Lenovo Forums.

  If you hear sound that cracks when you open your LCD or you think the hinges left / right become cowards then I recommend that you do fix it because it can damage the back platic if left unrepaired.

  You can get here to spare:

  Lenovo Ideapad S10-3 left / right hinge set

  And you can follow this guide diassembly or this video as a reference. If you are not comfortable opening the laptop, you can have this service in a local computer repair shop.

  Note:

  Use ESD protection and ensure subsequent disassembly your PC because it includes items that are easily breakable.

  I hope this helps.

• Graphics problems during the game Age of Empire II in mode full screen in Windows 7

  Original title: screen resolution and/or graphics problem with Windows 7.

  Hi, I had currently two computers in my house upgraded to windows 7, one a Vista XP.

  I am trying to run Age Of Empires 2 on both computers, the game has installed and running with ease, however it won't let you play the game in full screen, and also the color of things like grass and trees appear in red and orange, water displays brilliant purple.

  I tried to change the windows screen resolution and the resolution of the options in the game, but it only changes in the percentage of the screen resolution, that he chooses to play in.

  I can solve this? All advice is appreciated and thanks in advance.

  PS I tried to reinstall and update graphic drivers, both computers have the same problem of new clean installations of windows and Age of Empires 2.

  Thank you

  It is a problem due to the fact that AOE 2 was built on the platform Windows 95/98 Win9x. It will expose a few graphical artifacts while playing. You can try setting compatibility Win98 or Win95 check. There is also a workaround that may work in my opinion. You will need to search for "how to run StarCraft (1) on Windows 7" in Bing (Alternatively, Google: P) and it would show a site with a .bat file that could solve the problem of graphics in fullscreen.

  I hope this helps.

  What I did with StarCraft was this:

  On the desktop, right-click and select new text Document. Inside the Document, type this

  Taskkill /f /IM explorer.exe
  D:\"StarCraft"\"StarCraft.exe".
  Start explorer.exe

  Just replace the location of StarCraft with the location of the AOE II.

  Save the file as: 'AOEII.bat' and then set the file type to the text file to all files.

  What happens is that if corrects the discoloration and restart the explorer again after the end of the game. Although there is no easy way to change the icon of the good bat file: P

• get graphic problems, test Directx 3d does not look like it used to

  I have been experienceing some graphic problems. When I run the test 3D in dxdiag rotating cube is not used. How can I fix directx?

  Hi ML1967,

  ·         What version of direct do you use?

  Follow these methods.

  Method 1: Update the latest graphics/display drivers.

  How to manage devices in Windows XP

  Method 2: If the problem persists, download and install the latest version of directx.

  http://www.Microsoft.com/download/en/details.aspx?ID=35

  For reference:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/troubleshooting_directx.mspx?mfr=true

• Non-functional processor DV7 - what a graphic problem?

  Hi all

  Edit: I think that it maybe the wrong section for this so I she published more than crash & block but since I saw some views on this one, did not delete in case someone was following this so leave it here for now. Administrators can remove if necessary.

  I have a product number, dv7-4273us: XZ295UA #ABA. Bought July 11 or 15th, 2011.

  Current problem:

  Saturday, August 16, 2014, I visited a friend to download far cry 1, 2, 3 and the DLC via steam. We left my computer download and went out. On our return 2 hours later, when I tried to make out the hibernation mode, it does not start and the caps lock light kept flashes once, indicating a CPU failure according to the error code to connect to this site.

  Performed troubleshooting:

  I checked the plug and discovered that the taken light was red, so I went taking points, and the 2nd which shine white.

  Connected to an external monitor no dice.

  noticed that the light on the drive on the side right hand turns red, so tried the hard reset - removed the battery and tried to start it with just the connected plug, he came but it's same - caps lock flashes indicating once cpu failure.

  Previous problems:

  So far, the only problem I had with the computer was that full screen, sometimes the light blue light and I would not be impossible to access anything. I would be put to sleep to get it out or restart.

  My Questions:

  (1) could download have hurt the CPU?

  1 (b) if I ran out of har of disk space to download making the failure of the cpu?

  (2) the graphic problem I had known would be the cause of the failure of the cpu?

  2B) if I replace the map move the cpu would resume the feature?

  (3) is anyway to get the laptop working again without having to buy a new processor?

  (4) I have used my computer plugged into a surge protector, but when I visited my friend was firectly plugged into the wall, he suggested that the computer overheating. Is it correct?

  4 (b) but do not tell the flashes, could something else have been damaged?

  (5) it is just better to buy a new computer and forget fixing it? I can't afford it, but I'll ask just in case.

  Thank you in advance for your help, much appreciated!

  Note: I'm not in the United States, I'm in Barbados, so I do not have access to online services like amazon - they often don't ship here, and I won't be able to get my computer to any physical location in the United States for repair.

  Hello

  You should be able to order a replacement CPU from the laptop. This would occur in the maintenance and Service guide (which is in my previous post). It can be a stand-alone item however, some laptops, it's part of the system board replacement.

  I hope you're able to help.