Graphic problem on my Qosmio F10

I have Nooteboom Qosmio F10! I have problems with my screen, I don't know if it is a technical problem or drivers, but I cannot read anything on it!
All fonts and logos are somehow transformed into symbols and small pixels, I can't read anything about him so if someone could help me how to enter the BIOS and add DVD room to start him!

If you can tell me with a photo of him and that his poosible with some directions for example

Press ESC - F1 dhen close twice to the left then enter once down or whatever it is, I need someone to show me how to do this without seeing the fonts because I see nothing in my Nooteboom so if you run me so maybe I can get it formatted and maybe it will work better , it wont start at the end when it shows somehow the logo of the window then opens the blue screen when I try to install the drivers from the cd it asks me how to open the files of the cd rom when I give an order with explore it shows F: is not accessible has tried to install the drivers of the flash memory , but the flash stick is not recognized by pc so please if someone can help me I would appreciate it :)

I hope I was clear and you understand me because my English is not good :)

Thanks to those who help me :)

You can test it with an external monitor to see if the problem will be the same?
If so, I'm afraid there is problem with graphics card and in the worst cases, the motherboard should be replaced.

Tags: Toshiba

Similar Questions

  • I had problems with my Qosmio F10

    Dear friends,

    Let me share my problems with you and please help me with a solution for this.
    I have my qosmio F10 machine its over 1.5 years. It has been repaired 3 times since I bought it.

    1 (6 months after I bought it), I had a problem with my machine. ASP in Holland said that my Chipset and my V - RAM has been modified to be a new (chipset 855 PM at 915 PM & VGA card GeForce FXGo5700 to Go6600)

    2nd (6 months after the 1st repair), another problem occurred. My sound card was in trouble and was changed. It is ok.

    3rd (4 months after the 2nd repair), my system frozen. Toshiba Netherland replaced the fan and installed the new graphics processor. The spund of fan drives me crazy.

    And now, I just got a problem this morning. When I turned on my power, I did not see anything on my screen (white screen, even no happened qosmio opening graphics.) Looks like I got a same problem with my 1st. Would someone like to help me? What should I do now? Many problems has been held since the 1st repair, I'm tired this kind of problems. Could you guys help me, please?
    Thank you.

    Kind regards

    Moeltan
    (Netherlands)

    Hello

    I'll try to help you, but I guess it's a hardware problem and you will not be able to solve this problem without additional and service partner assistance.

    But we could try to find the fault. You should try to connect the laptop to the external display and could test whether the display will appear on the second screen.
    If this isn't the case, everything looks like a bad GPU operate probably the fault of the motherboard.

    Then contact the ASP in Holland and explain the situation as a whole.

    Good luck

  • Qosmio F10-101: after change of graphics output d-video card does not work

    Hello
    I had a problem with my qosmio F10 and after service, changed the graphics card from Nvidia Geforce 5700 6600. But when I tried to switch the LCD for the TV screen, I could not use my d-video out (SCART nb exit). I could not change display properties TV format because these settings the value NTSC and shadow. You have an idea? How can I solve this problem before the service...
    Thank you

    Hello

    The G10 has installed the utility of development of Toshiba and this tool has controlled the TV out put and the PAL, NTSC settings.
    Check if it is available on your Qosmio F10 and change the settings if necessary.

    Furthermore, it would not be a bad idea to access the BIOS and check if there are any options that can move from a PAL, NTSC

  • Many lines appear on the screen of Qosmio F10

    Hello

    I have a problem with my Qosmio F10 screen
    I see a lot of lines on the screen. And I have to disable the VGA driver or run the screen by using the options below.

    I plugged the laptop with external LCD display, and the same problem appears!

    That's why am sure it is a problem of VGA card

    What is the solution?
    Should I change the whole motherboard? And I can't part used rather than buy a new one? Because it will cost me a lot! And where I can good.

    Another question, yesterday the screen was simply awesome! I don't know what happened, I just with leaves the laptop that works for about 10 min and when I came back, I found that it works very well. After the reboot, the problem appears again!

    Is it possible that the chip is (half broken) and could be fixed?
    Or should I get the new motherboard?

    Thank you

    Hello

    Unfortunately, it seems that the solution is not good cheap!
    Graphics card chip malfunctions and it seems that the whole motherboard must be replaced! The motherboard is one of the most expensive laptop outside the internal display parts.

    Sometimes the graphics card work poorly due to overheating and high temperature inside the laptop.
    In this case, it s always advisable to clean the cooling modules.
    This can be done easily by using the hose of the vacuum cleaner.
    But please be careful.

    But if this procedure will not improve the graphical situation then the graphics hardware is certainly defective and only replacement could help!

  • Qosmio F10 grafic card GForce 5700 128 MB has been replaced the GForce 6600 128 Mb

    Is everyone has the same problem for Toshiba Qosmio F10 after video card replaced
    Lines on the screen or the computer does not start properly only fan works but not the Windows logo on the screen appears

    Hello

    This sounds not really well I put t know what that service facts guys
    Either it forgot to plug something or there is a power failure.
    I think you should communicate with the guys again to clear this ridiculous situation.

    I already answered your other post. There you should find the link to the ASP database

  • Qosmio F10 reinstall issues

    Hello

    I have some problems with resettlement Qosmio F10.

    First, I formatted the HARD drive and created 2 new partitions. I installed the new windows XP Pro without using restore disks. Now, the computer is unable to boot to the hard drive. There is only a cursor flashing at a black screen. The player is not more work. If I understand correctly, the player has been installed on a separate partition that I deleted everything repartition disks. Is this correct? Could someone tell me the initial configuration of the HARD drive.

    I don't understand why the system is not booting. If I place the HARD drive on my other laptop it's start and everything is ok. It's a little messy.

    Any suggestions?

    Stiopa

    Which player? Do you mean Qosmioplayer?

    AFAIK qosmioplayer must be installed as a first step prior to installation of the operating system.
    To be honest, who knows what's the problem with the installation of Windows XP Home edition. What WXP you try to install the SP1 or SP2?

    Try to install it again.

  • Qosmio F10 recover after replacing the motherboard

    Hello

    I'm having a problem with my Qosmio F10 recovery. It won't boot from the CD, I get a message "media test check the cable failure".
    I tried everything I could find here on this issue without any results. Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is excatly the case.

    I got a new motherboard and CD/DVD player put some time ago.
    How can I make it work again?

    A.

    > Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is exactly the case.

    Who replaced the motherboard? THE ASP?

    Well, usually the recovery CD should work after the replacement of the motherboard.
    I presume that the parts have been replaced with exactly the same parts and so it should t be a conflict between the recovery and the new motherboard CD.

    Have you tried to boot from another bootable Win XP or Linux CD? Check it!

  • Screen with a Qosmio F10 problems

    Guys, I have a very cold sweat and Im panicking on my laptop!
    It crashed on me and he couldn't do anything, so I turned it off. I came back to it a few minutes later and when I tried to turn it on, I get a black screen with as white on the screen axis-bands. I don't know if the laptop itself is wrong or just the screen. But I am worried, sick and trembling like a leaf here!
    Please help me!

    My laptop is a Toshiba Qosmio F10
    bought mid-2005 for about 1.5 years

    the screen is just weird. Black with vertical pin strips.

    No, I have not installed a new software or hardware. I was just working away in Word and Photoshop when he went AWOL. So I had put out of service.

    Hello, Karen

    There is certainly a hardware problem and I'm afraid there is nothing you can do alone. You can test it with an external monitor to see if the problem persists and check if the problem occurs due to faulty display or graphics.

    Believe me, the best thing you can do is to contact Toshiba authorized partner in your country. Let them test your defective hardware for laptop and Exchange.

  • Qosmio X 870 - 13v - graphic problem steam L4D game - black shadow on the light

    Hello

    I play this game using 2 PC Toshiba laptop.

    A Satellite L670-1KZ: 2.67 Ghz - Radeon Mobility HD5650 - RAM 6 GB i5.
    A Qosmio X 870 - 13v: i7-3630QM 2.4 Ghz - GeForce GTX 670 M & Intel HD Graphics 4000 - 32 GB of RAM.

    On the 1st, I have no graphic problem.
    On the Qosmio, I have a BIG problem with little light that have large black stain on it.

    You can see the 'bug' on YT here below:

    https://www.YouTube.com/watch?v=c4E2DFScyfU&feature=youtu.be

    The configuration of the game is the same on both machines with the exception of the resolution.
    My drivers are up to date (GeForce & Intel).
    I uninstalled the game twice only = no results.
    Settings, to control panel Nvidia, I changed several times (Note option shadows cache) no = no results.
    I played with game config below only = no results.

    I posted on the forum of steam only = no response.
    I posted on the forum of Nvidia only = no response.

    So, can you help me solve this problem?

    With our thanks,
    Guillaume.

    You have any other graphic matter using this Qosmio X 870 - 13v?
    I mean other problems related to the image to appear in other games and other applications running?

    Otherwise I n t think that there is something wrong with the laptop.
    In this case, it looks like very specific issues between this game and probably the graphics driver.

    It turns out that you won't encounter problems under this game the Satellite L670 with ATI driver.
    The Qosmio is supported by the nVidia GPU

    I think there must be a link any between the nVidia GPU and this game.
    In my opinion you should look for the solution in the steam forums or nvidia even if you have not received answer yet.

  • Fan noise after changing graphics - Qosmio F10-101

    Two months ago, I had my graphics from nvidia fx 5700 for nvidia geforce go 6600.
    Since my computer toshiba qosmio f10-101. After changing the old graphics card there is a fan noise that starts and stops every 2 minutes, it makes me crazy whenever I'm hear.

    Can someone tell me if this is normal and if they know if the specific card is noisy in any laptop? or if there are ways to remove this noise or to maximize the speed of the noise. ??

    Post edited by: marlena

    Hello Marlena

    The Qosmio forum, you can find some similar topics with some interesting comments. On the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103

    Good bye

  • Need new card mother/graphic card for Qosmio F10

    Where can I buy a motherboard and / or graphics for Qosmio F10?

    Thank you, all.

    Hi Karen

    I'm sure you know very well what options you have about parts of replacement hardware. Or you want to have prices, address and phone number? ;)

  • Qosmio F10 - broken graphics card

    Hello

    I have a Qosmio F10, but unfortunately the graphics card is broken on it, if anyone knows if it can be repaired without having a new card mother 'expensive '!

    My warranty has expired at the beginning of this year so I'm worried about how much it will cost, all my personal files and data are always on it, so is it still possible to take down them with her still divided?

    I have power get sill on the machine, but nothing lights up the screen and the fan is constantly at full power.

    Hi Paul

    This is a very silly situation, I assume that you will not be able to repair the laptop without a motherboard replacement.
    Set the id of the graphics card on the mobo and it s not possible to easily remove it from the motherboard.

    If you want to save your data and files of ads please remove the laptop HARD drive and connect it to another computer via the external USB HDD controller.
    These external HDD 2.5 case are not expensive and you can buy it in every store of the computer.

  • Qosmio F10-36: drive problem HARD and Qosmio player installation

    I bought the Qosmio F10-36, made in Germany for the Russia and CIS. After that 6 months, it was repaired due to problems with the motherboard, it was totally changed in the video card and now there are problems with the hard drive after the start of the very slow work computer and finallly collapsed.

    We had to format the hard drive and you must now install the player, Qosmio, which was also removed during this work.
    How we achieve this, I'm too far from the nearest service centre.

    frankly I am fed with this qosmio upward!
    If any chance that I would go back to toshiba filled like never such problems before.

    In my opinion maybe call and ask why this happen just to hear what they have to say about it.

    In any case, I recommend you to follow:
    If possible, back up all your data on an external device, such as USB key or HARD drive
    The first installation with recovery CD Qosmioplayer delivered Qosmioplayer
    When finished install OS using supplied recovery DVDs and you'll have the factory again settings

    After this check the unit carefully to make sure if there is just like before.

  • Video output distorted on Qosmio F10

    Hello

    Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

    My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

    To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

    I would be very grateful for a diagnosis on this issue.

    Thank you and best regards,

    Johan

    If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
    However, as a first step, you may try to update the page Toshiba graphics card driver.

    It would be very interesting to know if such question will appear on the new OS recovered

  • Qosmio F10 is always hot

    Hello

    I have a Qosmio F10 and my problem is that the fan runs all the time because he's hot. "I am obliged" to the low and fixed frequency to solve that. But in normal mode it heats up, even if I only surf on the Web.
    What should I do?
    You have an idea?

    Hi benlog

    To my knowledge, books are of high technologies and machines of many parties in the products of the unit a lot of heat. For example: graphics chip. I put t now how you use the laptop but it is recommended to use it on the desktop. On this way, the cooling fan can work properly. Secondly, a lot of background processes running on the device. Processor must therefore operate with higher performance and produce more heat.
    Moreover, my machine is also fairly warmly.

    Best regards

Maybe you are looking for