graphics card to turn slim type cabinate

Similar Questions

• Pavillion P6218f graphics card fan is not turning

  When I went to start my PC started to emit a beep and the screen would not recognize a connection. The beep code was 2 short, followed by 8 beeps long beeps. I opened the case and cleaned up a lot of dust outside and then when I went to start it upward I noticed that the fan on top of the graphics card would turn a bit gusty, but would not keep spinning, and then the beeps occur. Is there a way I can remove the fan or card and replace it or even try to clean it up? I'm sure that's the problem. The card says it's a dolphin-10-M04 SP # 578174-001.

  Sean, welcome to the forum.

  Here's a guide that will help you remove the video card:

  http://support.HP.com/us-en/document/c01684404

  You can try to clean it up, but I think there could have been failure and should be replaced.

  If your problem is solved, please click "accept as a Solution.

• HP pavilion slimline s3632me graphic card problem

  It's my computer: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01552288 & lang = to & cc = us & conte...

  my graphics card has a fan that is not working, and I don't get any signal on my monitor after 20 minutes of start... so I decided to get a new graphics card which is better.

  so I want to know what is the max graphics card that I can put in this computer and should I go for the same type (AC express graphics card) or get any type that can work with the computer?

  Here are the specifications of your HP Pavilion Slimline s3632me desktop computer and its card mother M2N61-AR (Acacia). Based on the specifications, this model has a power of 160 watts, a graphics card NVIDIA GeForce 9500 GS PCIe x 16 HDMI and DVI - I outputs and integrated nVidia GeForce 6150SE graphics with a VGA output. Note that the discreet graphics card and the built-in graphics card is not usable at the same time.

  You need to replace the graphics card NVIDIA GeForce 9500 GS PCIe x 16 with a x 16 low profile PCIe graphics card (the card must have a power system recommend assessment of 160 watts or less). All purchased card that has a higher recommended system power supply requirement will require the purchase of a new power supply, follow the recommendations in cards. Your computer's power supply is not a standard ATX power supply and can be difficult to find.

  Please send Bravo

• After windows upgrade graphics card video

  Hello everyone - I am trying to upgrade my desktop dell computer.

  I've updated the software for windows 7 ultimate. Everything went smooth except for the resolution of the screen.
  I have tried all the update and I think I need to update the video graphics card.
  No idea how can I do it at home?

  As previously posted, the type of graphics card, depends on the type of available card slot, yours has a pci slot.

  According to Dell, your model is not listed as compatible win7

  http://www.Dell.com/support/drivers/us/en/19/product/dimension-2400

• HP Elite 8200 ultra-Slim: graphics card

  Hello
  
  I have a desktop Hp Elite ultra-flat 8200 and I wanted to get a graphical upgrade, so I decided to buy an ATI Radeon 5450 mxm 512 MB discrete graphics card, when I put in my computer and turned on, I could not find the drivers, my screen has been changed upward, my resolution was changed and I could not change it back and it made my game even worse than before I already know that my computer is not the type of game, but any type of graphics upgrade could help out me. My main question is, why does it worsen my computer?

  Hello:

  Have you tried the MXM AMD support page of your PC graphics card driver?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5037959 & swItemId = vc_95361_1 & swEnvOid = 4059

• T420 how to turn on graphics card

  Hello

  I was experimenting with configuratition in windows 7 and I turnd off the coast of the graphics card. Now when I turn the t420 screen is black boot. I tried to get into the bios with the f1, but the screen is all black too. How can I activate graphics card so I can see something on the laptop screen.

  Hello

  I've solved my problem, I Frédérique have removed the battery from the laptop and placed it back and it helped.

  Thank you

• What type of graphics card can I put Poweredge T110 II?

  A result of slots server:

  4 PCIe G2 slots:
  Two x 8 slots (one with x 16 connectors)
  One x 4 slot (with x 8 connector)
  A x 1 slot

  Graphics must support Windows server 2012 (are Windows 8, Windows Server 2012-compatible drivers?). I not looking for something fancy or fast, just something that can take care of 2 monitors via DVI or DisplayPort.

  I looked at NewEgg section of graphics card and it is difficult to understand what type of interface I should take. This is what NewEgg for interface (I see no x 8 or x 4 as shown in the Poweredge T110 II specs):

  PCI Express 3.0 x 16
  PCI Express 2.1 x 16
  PCI Express 2.0 x 16
  PCI Express x 16
  PCI Express x 1
  PCI Express 2.0
  PCI Express 2.1
  PCI Express 3.0

  I would like to try any of the cards with x 8 to the end, even though it says a slot x 16 capacity, but only x 8 power.  The card can only be up to 25w.

  Kind regards

• Type of graphics card

  I have a Pavilion dm1-1011sa laptop I want to use it with a program that requires a dual output graphics card.

  This model has such a card and how to turn?

  Nana wrote:

  Hi Enrico,.

  The program is a display program called Mediashout Church.

  The program has a function that allows boot of a new slide to the main screen, but sends another slide of the projectot similar to a second monitor.

  Roddie

  No cell phones has the graphics power or necessary treatment for this.

  According to mediashout

  • Multiple video cards
  • Orvideo card a double head (DirectX 9 +)

  Or cell phone has this capability. You need a desktop computer with a decent videocard (mid-range to price) or double video cards.

  Always meet the requirements of the software.

  Kind regards

  ERICO

• I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

  Photoshop Lightroom  I have LR 6.1.1 CS and it keeps crashing, also tried to turn off the graphics card. Everyone knows the same and they have a solution.

  Hi ashvinkumarb40658145,

  When exactly LR 6 crash and you use a Wacom?

  Concerning

  Rohit.

• Can I turn off the 3D option in Lightroom as I have problems cos my graphics card on my iMac is only 256 and I can't update?

  My iMac only has a NVIDIA GeForce 9400 256 MB graphics card and I am unable to go to 512 MB on the model that I have (21.5 ' end 2009).

  Processor:-3,06 GHz Intel Core 2 Duo

  Memory:-12 GB 1067 MHz DDR3

  It was working fine a couple of days, but now I have problems? New download? He tells me that I need 512 MB graphics card to run 3D. I've never used 3D so it is a way I can turn off so that I do not need to spend $3-5 000 on a new iMac?

  Those are just friendly warnings. The relevant characteristics will simply not available, but the bulk of the program should work just fine.

  Mylenium

• turn off the graphics card for hp Compaq dc 7800

  I installed a nvidia quadro fx 580 graphics card, but I want to activate the built-in vga card and disable the nvidia card to switch between maps

  In virtually all models of HP desktop PCs, when a video card is lorsqu' une carte video est installee installed the integrated video processor is disabled.

  What you are asking for is only in laptops high-end as switchable graphics. Also, there are with some motherboards UEFI DIY very recent for desktop PC and is called hybrid graph

  I hate to bring bad news, but it is unlikely to be an option with a lower end PC productivity as your dc7800.

• I want to upgrade the graphics card in my computer and I don't know if they are of the type I need more

  I want to upgrade the Visual memory of 96,0 MB so I can run my game better. It would help if someone could possibly give me a source of where to get one that would be great thanks

  If you don't have a graphics card then it is integrated into the motherboard as you say. If it is a very old motherboard, it may be a good idea to get a newer computer with a good graphics card in it. If it's a newer motherboard, you should check if it has a PCI slot, and if so, you could probably buy a graphics card yourself and put it in your computer. Anyway, you should probably talk to savvy friends computer you have, who should be able to tell you which way you should look at.

• What type of graphics card intel is included w/the envy 15 t select w / 4200 m processor

  graphics card intel comes w / the 4200 m processor. is it the same thing as the 4200u?

  The selection of 15 t - j1000 comes with Intel HD integrated graphics based on the processor card and you can also order a discreet NVIDIA 740 M or 750 M card. The i5-4200U is a CPU ultra-low-power and comes with Intel HD 4400 graphics designation. The i5 - 4200M is a higher powered mobile processor and comes with the designation of Intel HD 4600 Graphics. Please see CPUBoss-i5-4200U vs i5-4200 M for a comparison full side-by-side two processors.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• 17 t j000 touchsmart forcing skyrim use nVida video or turn off the graphics card intel

  Hi all

  I just got this new computer and try to make it work with the game Elder Scrolls v Skyrim   the game starts and runs ok however by default is of poor quality with video intel detected 4600.   Don't want to use the video intel when even, so no matter not much.  I want to use is the video card from nVidia to 740 m.

  I went into the NVIDIA Control Panel and things together global use the nividia card, in program files, I put all the exe files of the game to use the nvidia card.   I entered skyrimprefs and sd3ddivice to change sD3DDevice = "Nvidia GeForce GT M 740" when I start the game it resets the video at the bottom and when I look at his still trying to use the card intel.  The skyrimprefs file is more written with sD3DDevice = 'Intel (R) graphics HD 4600'.

  So the question is how to get the game to work with nVidia card?  Or how to disable the card intel?

  Went into device manage and disabled the graphics card intel and skyrim can't always find the nVidia card. It uses Microsoft basic pilot to return instead.  A difference that I noticed is the base of Microsoft driver it will default the video quality of average quality rather than low quality I get with the 4600 built in processor video card.

  PROBLEM SOLVED

  I was running enb and needed to use the version of the injector instead of the version of wrapper.  the file d3d9.dll in the wrapper version forced things to use the graphics card intel.

• HP Pavilion DV6-C80EL HD 7690 M XT graphics card. Windows 7 64-bit operating system

  I have a PC HP Pavilion DV6-C80EL, with HD 7690 M XT graphics card. Windows 7 64-bit operating system

  B0B34EA TYPE S/N {removed privacy}
  I have try the card READER was updated to use windows 8
  HP told me to turn to AMD.
  AMD housewrap me to turn to HP.
  What should I do?
  THE PC was purchased in June 2012.
  Thank you

  HP has released a disc for the PC in question, associated with 64-bit Windows 8
  Greetings

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = IT & CC = IT & DLC = IT & sw_lang = & Product = 5212723