graphics driver of my pc vn7 - 571 g-51gc does not work correctly

Similar Questions

• the usb ports and DVD drive on my laptop of ts 17 want does not work correctly.

  My laptop dvd player cannot read software, flash drives and card readers and other usb devices d0esn ' t work correctly when inserted into the usb ports. I opened the Device Manager and noticed that the uj8c2 of ram dvd has a yellow triangle below. I clicked it and the State of the device as follows: WINDOWS cannot CE HARDWARE NOT CHARGE THE DEVICE. THE DRIVER MAY BE CORRUPTED OR MISSING. (code 39). the error status was ox x %. Today, I downloaded technical assistance from hp and when he ran a check on the system, it recommended two options for downloading 1. HP NOTEBOOK SYSTEM BIOS UPDATE (processors intel). 2 HP PC HARDWARE DIAGNOSIS UEF. I tried to download but were not available. I don't know if this problem can be corrected by the Manager of recovery so please let someone help out me. This month will be the third month, since it was purchased. Thank you in advance for your answers.

  Hello:

  For the DVD player, please try troubleshooting step 3 on the link below.

  http://support.Microsoft.com/kb/314060

• updated my driver for my Ethernet controller and now it does not work

  Original title:

  Network network network Ethernet device

  I updated my driver for my Ethernet controller and now it does not work... I can't put it up, are the only choices that I
  to establish a wireless connection or set up a broadband connection using a user name and password but my ISP does not require
  a kind it will not accomplish the connection in place, I use win 7 64, how do I fix this so I can use my connection ethernet again?

  Hello

  You can try the following steps and check if it works:

  Method 1:

  You can restore to an earlier device driver if you are having problems with your computer or device after upgrading the driver.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Method 2:

  If the steps above fail then you can perform a System Restore to an earlier point when it was working fine.

  It will be useful.

• Graphics ATI catalyst on Acer aspire timeline 3820 tg - does not work on windows 8 (HDMI does not work)

  I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver

  The Aspire 3820TG don't figure on our page Windows 8 Upgrade offer.

  Therefore, we do not provide drivers of Windows 8 for this system.

  You can try to find the drivers of Windows 8 on AMD Support site.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• White screen at the Vista start up... only the mouse pointer, loading the driver freezes on crcdisk.sys loading, sfc/scannow does not work...

  Hello
  I don't know if this is the right place for this post... Sorry if it's not! I had looked online if anyone has the same problem to me, I found similar problems, but not the mine one (but if there is, can you please give me the link?).
  I have a DELL LATITUDE D830's with a dual boot (Ubuntu and Vista). When I run Vista I get the Windows logo and then a black screen with only the mouse pointer.
  Keyboard does not work. I can move the mouse, but can not select anything. No work of Ctr + Alt + Delete.
  I can just turn off the computer. At first I need to press F8 to choose something otherwise I get the black screen.
  If I reboot requesting the automatic restoration of the PC that he asks me the account and work only account is mine a (no administrator available). He then suggested to contact the administrator. I checked the error report and nothing is reported: the system works.
  I have no previous configuration to restore.
  I can access the command prompt. So I tried to write sfc/scannow. The answer is that to complete the process requires to restart the computer and make again sfc/scannow. I restart again, the new order, but I get the same answer...
  When I get the black screen, CPU is not disabled, because after a long time (about 2 hours) the computer restarts itself... If something happens even if I don't know what!

  The only thing I have not tried is to restore Vista from CD... I'm really afraid that this could remove the partition, or crash at startup I have, by removing access to Linux!

  I have a backup of all my files, so no matter if what I have to do to cancel my files, but what I really need is to keep Linux operating.

  So, if you have any suggestions... I'm not good at using the computer, so, please, a solution step by step be really appreciate it!
  Thank you very much

  Paola

  PS No peripherics are connected, the wireless is disabled

  Hi seymar,.

  I suggest that you run a tool to restart system on the computer and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions. 4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  If the previous step fails then I suggest that you run CHKDSK on the computer to check if there are any errors on the hard drive.
  1. Insert the installation disc.
  2. restart your computer.
  Click the Start button, click the arrow next to the lock button, and then click restart.
  3. If you are prompted, Press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change the BIOS settingsfor your computer. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click on the command prompt and type chkdsk command-line /f and wait until the scan is complete and later to restart the computer and check what is happening.

  For more information please visit the link below.
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Drive CD/DVD of Satellite P100 does not work correctly

  Play dvds on windvd or CDs on Media Player results in his nasal and photos. Sometimes both play very well but then any attempt to enter a new menu or jump titles causes stuttering again. Tried a system restore that solved the problem initially but now it is picked up. Strangely, change the volume sometimes seems to invite the reader to work properly, almost as if he's slow and then use other controls somehow turns it.
  Is it a hardware problem or software?
  Not a computer expert so if you have a solution please explain as simply as possible.
  Thank you very much

  You can see the graphics properties in Device Manager ;) dude :D
  But it seems that the laptop came with the nVidia 128 MB graphics card.

  Have you tried to update the graphics driver to the latest version available?

• HARD drive external "this device does not work correctly"Code 10"

  Original title: it does not recognize the external HARD drive. (Convert HDD mobile external HARD drive)

  I have a Sata Drive en-plus close card I bought, I successfully installed the HARD drive and plugged (supposed to be taken & play), it does not recognize the HARD drive and I tried the computer management and replacement of INF. USB but still does not. Also, has problems. Drive HARD Toshiba satellite came 500 GB Fujitsu HDD.

  The point of this is to clean up the cause of the car, there an OPS on it, but I have not anymore!

  Need help please!

  Hello

  Method 1:

  See the link and check if it helps:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2:

  Check the link and try to run the Microsoft Fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• A Satellite Pro 6100 graphics card does not work correctly

  Hello!

  I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
  I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

  Now my questions:
  1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
  2. How can I do this, is there some tutorials, especially for my laptop?
  3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

  I thank very you much in advance!
  Lukas

  Hi Lukas

  The led flashes as it provides a microcode error!
  This is especially if the malfunction of hardware has been detected.
  I presume that the replacement of the graphics card is the reason!

  As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
  Looks like that the BIOS cannot handle this new graphics chip.

• Re: Optical drive on Satellite C850-1MC does not work correctly

  Hello

  Optical drive on my Satellite C850-1MC is malfunctioning.

  The drive made all the right noises and will show the CD coming in the my computer window, it will show the different tracks of audio CD but with only 1 KB of data showing and will not play any of the tracks.

  Any thoughts greatly appreciated.

  Thank you very much

  Eldon

  > it will show the different tracks of audio CD but with only 1 KB of data showing and will not play any of the tracks

  Dude, this isn't question of CD/DVD drive

  I guess you see the files with .cda extension
  These files are not real audio files, but this is the format used to encode the music on all commercial compact discs.
  Unfortunately, the computer cannot store files in CDA format.
  These audio files must be converted to another format by using the converter of 3rd party software

• Drive CD/DVD of Equium A60 does not work correctly

  Hello
  I just bought a used Equium A60. The seller reformatted the laptop using the player. However, the player will not play any disc now (I tried the CD, DVD and Toshiba load discs. The Device Manager shows the drive works, but the program tells me to insert a disk. Using advice gleaned on this forum I tried to clean the lens, System Restore, start with the key C pressed, tried F12, downloaded a driver for DVDram drive and finally remove the disk and submit.
  The seller said he always worked well for him and the laptop arrived in perfect condition. All you other ideas?

  Go to Device Manager and remove the CD/DVD drive.
  Then restart the laptop and wait until the OS has recognized and installed the disc again.
  Reboot the laptop!
  Access to the registry editor and select this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here, you need to remove the UpperFilter and UpperFilter
  Then reboot again.

  I hope it helps

• Partition the USB drive CD external-320 GB - PX1267U - 3 32 does not work

  I have an external usb 320 GB, that works perfectly.

  There are a score of security which appears as a CD drive in my computer and directs the program of password automatically when the drive is connected.
  After entering the password for the drive external hard appears as a drive in my computer.

  This security program has stopped running.

  I turned the on/off control.
  Tried it on another machine.
  Tried to "Autoplay" CD player.
  Double click on the CD drive only to be told to "insert a disc into drive F:."

  Is there a way to bypass this partition and recover all of my data from the hard drive?

  Hello

  Several times I saw how it works because one of my friends has this external HARD drive. I don't have much experience with it, but before you wait here for the comments trying to reinstall the REGEN software. Maybe this will help. This software and Application Update CD you can find and download from Toshiba support page http://eu.computers.toshiba-europe.com

  Check it under Options > workout equipment.

• Drive CD/DVD of Satellite A30 does not work correctly

  I have a satellite A30 - 921, but for some reason any cd/dvd stopped working. It is said in the folder Drivers 'driver corrupted/missing. (Error code 39). It will not back down or update either. Do I have to download the driver (this is Toshiba dvd - rom SD-R6112) new & if so, how/where? I can't use the installation or recovery disk as it will not read the drive. Any ideas pls.

  So, you mean that your CD/DVD drive is faulty and you can't read or restore your system.
  To download drivers, you should take a look here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Otherwise I suggest you bring your machine to a service for a hardwarecheckup partner. If your drive is actually defective, then it must be replaced.
  If you need help to find a service partner, then click on this link to find the closest of the ASP available in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Satellite M30X graphics card does not work correctly

  The best I can describe the problem is that the display looks like he has a trellis in front of her.
  I connected a remote screen I know works fine and the problem is the same, so I'm sure that the problem is not the LCD display itself.
  Looks a bit like a screen of matrix of the film of the same name. I also tried to replace the motherboard, but the problem remains.

  The laptop itself works very well and always does everything its supposed to but the screen make it practically impossible to read.

  Any ideas?

  Unfortunately, it's really not easy to say what could be bad exactly.
  Maybe it's a problem of graphics card chip.
  According to your description this fault could be possible.

  Most of the time it s advisable to ask and laptop for an audit technician. He could run a diagnostic test and could locate the hardware failure more quickly.

  Sorry, but that's all I can suggest.

• Device driver USB Apple Mobile and iPhone download updates does not work

  I just got a new phone and I am trying to restore from a backup of my old. The problem is that my iPhone is not showing in iTunes. It appears in the 'My Computer' section as a device. There is a problem with the 'Mobile USB Device Driver' that I couldn't solve. Whenever I plug my iPhone, the said driver installed in vain. I tried to restart my computer, download iTunes more and try the solution where I change the driver to a section of the common media-files-Apple-Mobile device drivers, and when I do that, it says "Windows has determined the software driver for your device is up to date", although the small box yellow exclamation beside it. The choice of 'Roll Back' for the driver already installed is there, so I chose to see what happened. This allows the driver to "Mobile Device" appears, where my iPhone now charge when I plug it into the computer. I go to this device and try to install, and it refers me to a screen that says "Windows found driver software for your device but encountered an error when you try to install it" and then lists the mobile device as the problem driver. I think I can be "go back" to a bad driver, but I can't find out how to download a driver that is correct and working.

  I updated my phone to the new operating system, as well as some downloaded the latest version of iTunes available.

• Graphics card does not work on the Satellite L850 PSKFWA

  Hello

  I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
  I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.

  I haven't noticed any problem with the graphics.
  It may be a Radeon problem, but what I have on my system, which was installed at the factory.

  Thanks for everything back
  Hetty

  + The message was edited: model nr. Add the object +.

  Can you please tell us once more what model of laptop you have exactly?
  Are you using the original Win8 preinstalled?