T460S Touchpad problem

Similar Questions

• Satellite P300-1 year - Touchpad problem with AC adapter / CC

  I have a laptop Satellite P300-1 year and from the beginning (two weeks)
  I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

  It's VERY annoying. A USB mouse works perfectly.
  I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

  Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
  With the battery, the touchpad is perfect.

  I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
  Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  Anyone had this same problem?

  > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  The point is that your laptop should be always verified using the Toshiba factory setting.
  Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

  In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

  I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
  If yes you can contact ASP and could provide all the necessary details for only one technician.

  Good bye

• T460 touchpad responds liked when the Ethernet cable is plugged

  Hello

  I bought a brand new ThinkPad T460 ten days ago and I noticed that when I plug in an Ethernet cable, the touchpad responds: just a few clicks and taps are missed, the movement is slow and and sometimes temporarily blocked. The touchpad comes alive again as soon as the Ethernet cable is disconnected. The trackpoint and trackpoint button above the touchpad are not affected, only the touchpad starts to misbehave.

  This happens on both Windows and Linux, this isn't a problem of specific operating system. Furthermore, I checked to see if I am running the latest version of the BIOS, and I am. And there are no problems when you use the wireless adapter, but one of the reasons why I bought a ThinkPad was she has a port Ethernet, so not being able to use it would be extremely disappointing.

  I checked to see if there are any IRQ conflicts for the touchpad, but could find none. The problem occurs when the computer is plugged in and when it runs on battery only. I also tried two different cables in the same router, each in a different router port, and the problem persisted.

  I'm using the latest drivers for Windows 7 directly on the Lenovo site, and Arch Linux with kernel 4.4.5 - the Ethernet card is considered:

  e1000e [2.751703]: Intel® PRO/1000 3.2.6 - k network driver
  e1000e [2.751705]: Copyright (c) Intel Corporation 1999-2015.

  Should I expect it is fixed with a BIOS update, or do I have to contact guarantee? It is unacceptable to live with it.

  Tried in another House as promised, and the touchpad works very well with cable Ethernet is plugged. Also, before you leave the House with the problem, I discovered that the problem occurs only when the cable from my ISP switch is plugged into my router.

  Respect my opinion that this machine deserves a stronger touchpad, but apparently is not due to lack of computer - under normal circumstances, there is no problem with the touchpad.

  I'm stumped on how to proceed. Can I use a multimeter on the ISP switch from cable, but I'm not sure what to check (voltage? how does and between what son?). I'll also look into the suggestion of ferrite, I don't know where they are available - this thread is first heard of them.

  Anyway, I wanted to just erase Lenovo name on it.

• T460s scrolling problem

  Hello

  My problem is that two fingers scrolling becomes really slow right after you use the trackpoint to scroll middle button. To get two fingers to scroll at its normal speed, I need to finish the task "Synaptics TouchPad 64-bit improvements" in the Task Manager (effectively restart the task). But using the trackpoint for scrolling goes off two fingers of slow scrolling. Since I want change between using the trackpoint and the trackpad, it's pretty boring.

  The problem only occurs when you use the "Use to scroll" option under "Middle Action button" in the mouse settings. There is no problem when you use the "Use as a middle-click" option instead.

  I'm under 10 64-bit Windows, and I use the latest version of the driver Synaptics ThinkPad UltraNav (19.0.17.77). The problem occurred also with a previous version of the driver (I had the T460s for 2 weeks and the issue has been there since I got it). A reinstallation of the driver does not resolve the issue. All other drivers and bios must be up-to-date.

  Any ideas on how to solve this problem?

  In response to unexpected scrolling customer relationships and behavior of touchpad on ThinkPad, Lenovo T460s has published a solution via the driver update.

  Synaptics ThinkPad UltraNav Driver, version 19.0.17.98, can be downloaded here: http://support.lenovo.com/us/en/downloads/ds111814

  Thank you

• Split x 2, touchpad problem

  The Split X 2 HP with processor i5 and WIndows 8.1

  I bought a x 2 split this last November and I had a problem of re-occurred since I got it. During use, the mouse will often freeze and my touchpad does not work. Can you please tell me how to fix this? I am a student engineer and I need my computer works fine for my work. Thank you

  Hello

  I recently used a Split 13D x 2 that has the same problem and the next seems to correct the problem.

  Open windows control panel and open the Device Manager.  Expand "Controllers of Bus USB" and you should find 2 entries for "Generic USB Hub".  Right-click on that 1 and select Properties, then select the tab power management and Remove the tick in the box "allow the computer to turn off this device to save power".  Click Ok to save the setting.

  Do the same for the 2nd "USB hub generic.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• Pavilion: synaptics touchpad problems.

  I currently have problems touchpad and mouse.

  I used my wireless mouse once and my trachpad has stopped working compltetely.

  I have seen that it is a common problem but Ive tried everything and nothing works. a hard reset worked once to get my mouse works again without the wireless mouse but when I need to click top of cushion does nothing.

  I tried another hard reset, but the mouse pad still does not work. the mouse only appears when I plug the wireless mouse.

  When I go in the settings is not synaptics, so I downloaded synaptics for my laptop and he said 'impossible to find specific program BONES.' so I uninstalled the old version, downloaded the version for my computer laptop but still said the same thing, even if it was the version for my laptop.

  Any idea?

  @evanb1997

  Install this first.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72862.exe

  RESET.

  Then install this.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72875.exe

  RESET

  REO

• Satellite Z30 - A - 1 d 0: No. Wlan after fashion 'sleep' / touchpad problem

  Hello!

  I bought this laptop in early September and I am super happy with it, but there are two little things that annoy me and I was not able to fix yet:

  (1) exit standby or sleep mode, it is re - connect never automatically for the wireless on it's, I have to do it manually every time. Windows wireless works well, so this isn't it, but what is?

  (2) sometimes the touchpad will stop working randomly and I have to use a mouse or restart to fix it. I reinstalled the drivers for the touchpad. Turning the touchpad/disable using function keys does not resolve the problem.

  Any help would be appreciated!

  Yes, the Intel® Dual Band Wireless-AC 3160 pilot was published on the Intel page, and looks like this driver is more recent than the one provided in the Toshiba page.

  Here you can get the latest version of the driver:
  https://Downloadcenter.Intel.com/SearchResult.aspx?ProdId=3776

• Satellite L505-13W - FN keys were not and touchpad problem

  Hello everyone,

  I have two questions and I'd highly appreciate your help.

  First, when I got the laptop he used to have a Fn bar that comes down from the top of the screen when I press the Fn, it shows all the keys Fn, now it disappeared. I need to get it back, I almost tried everything and nothing is there yet.

  Second, the touchpad is a zoom no more when I apply the 2 fingers in and out, he used to do that before.

  My laptop is Satellite L505-13W

  Thanks in advance

  Hi abdouni,.

  1. I think that the problem is related to Toshiba Value added Package, and Flash Cards Support utility. These two tools control FN keys and cards Flash appears if you press the FN key.
  You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Regarding the installation: first remove these two tools and reboot the laptop. Now, install the package of added value and stop and start again. Install the Flash Cards Support utility and do a restart. Now, the FN keys should work again.

  2. it could be related to value added package too to check my ad.
  If it s does not work, reinstall the driver for the touchpad.

• Satellite T110-107: touchpad problem - pointer move sometimes

  Good afternoon everyone,

  Currently I have a series of Satellite T110-107 and have problems with the touchpad.

  I start the computer and the touchpad works very well for a few seconds, after that, the touch pad stops working to full capacity.
  If I wander my fingers on the touchpad and the pointer does not move, sometimes it will move up and down, but not as it should.

  It is a common problem, or is it a hardware problem... or is it the fact that I'm just not accustomed to having the correct settings on windows7?

  All help reveal be great, because it's very frustrating!

  Kind regards!

  Hello

  I found a few tips and tricks that you should try.

  First, you must change the sensitive touchpad settings to lower the level.
  Go to control panel-> mouse and all the settings for the touchpad to the value has a less sensitive level.

  You should also right click Synaptics Pointing Device (in the taskbar) and get in the middle of the page Double click speed on.
  Move the slider to half way down the beach. This should help you too.

  Last but not leas, you will need to disable zoom pinch.
  Go to the icon in the lower right corner Synaptics pointing device, click on 'The pointing device properties', click on the "Device settings" tab, then the settings button. Uncheck "Enable Pinch Zoom" under "Pinch Zoom".

  Greetings

• Equium M40 portable: Touchpad problems

  First of all sorry if in wrong place but couldn't find a group for this laptop. problem as below.

  I just got a new toshiba laptop and when I used it all first my touchpad was
  the side usual low scrolling functions and hot spots, etc.
  Now, he works as a base of the mouse, the cursor moves and you can click
  etc. on the keyboard itself. But I've lost the ability toscroll using the side
  and at the bottom of the pad etc.
  I tried double click on the key and start the program, but nothing
  He's coming!
  I did the transfer of my old laptop settings by using the Windows XP file transfer
  Assistant, is otherwise responsible?

  so far I tried to re install the supplied the toshiba ALPS touchpad driver and
  Touch and the launch but no joy.

  Can anyone help?

  Andy

  Hello

  I don't know exactly where you can find a correct setting on this unit, but it must be somewhere in the mouse properties.

  Please also check the model of laptop. Equium M40 does not for me. Just A60. Give us please the right laptop model.

• Touchpad problem - Satellite A50-111

  Hello. Last week, I bought my laptop and here I am with a problem of inportant.

  The touchpad does not work correctly. When I take the finger above the cursor jumps up and down even when the finger is motionless. (It's like the mouse cursor oscillates on its expected position). It is very difficult to click on anything whatsoever. I use an external USB mouse that works very well.

  I don't think that it is a driver/software problem. I use a linux live CD (Knoppix 3.7) distribution to check if the problem persists under linux. He does.

  Is there someone else with the same problem here? Don't you think that, given the information above, it is a hardware problem or would it be the drivers?

  Hello

  In my view, it cannot be driver issue, as all drivers are put to the test. It is very difficult to say what is a problem.

  You can check all the mouse settings including the advanced feature settings. Y at - there no any improvements you can contact the after-sales Service of Toshiba partner. Those are responsible for all material tests.

  If you need info on the Service partner you can find it on
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good bye

• Satellite A-C55-1R8 - interference of Touchpad problem

  I have the Satellite C55-A-1R8, using Windows 8.1.
  The Synaptics touchpad has always given unpredictable results, some setings I have used or cancelled.

  For example, he suddenly loses the ability to receive a double-tap, even if the icon still has ' tap to click on "checked. When I click it, the cursor flies in the upper right of the screen and is difficult to control again.

  However, the buttons continue to operate normally, but if I sleep or Hibernate the computer things are normal again immediately, he wakes up.
  Also, the key often picks up and moves the icons and files without double click. I installed the latest Synaptics driver update, but no change.

  However, I said that the treatment of the files on this model are so thin that the fingers to rest above and below the keyboard can interfere with touchpad controls and begin to suspect that it is maybe the reason some of the strange behavior.

  If this is the case, can I isolate it with almost anything to avoid this problem?

  Have you tried to reduce the sensitivity of the mouse?

  Since when have you noticed such behavior strange touchpad? Since the first may day?

  I don't think it's the best solution for you, but maybe you should reinstall the operating system using the original recovery image and it test the functionality of the touchpad with the 'settings '.
  If the problem persists it could be some hardware related issue so you can contact the nearest Toshiba service provider and ask for help.

• Satellite C660 - touchpad problems

  Hello

  I have problems with the touchpad on my Satellite C660. I have only had it for about 2 & 1/2 months, and the problem seems to be worse.

  I tried to check for drivers, changing the settings of the touchpad, but nothing helped.
  The main problem is that when you move your finger on the pad, the cursor will not move, however it also scrolls the page more or less important size.

  I'm quite frustrated because it is essentially a new machine.

  Everyone has ideas, or should I try to get replaced by a new one.

  Thank you

  James

  Looks like you're triggering gestures. For example, if you press the right side of the touchpad, it will allow the scroll bar.

  You can disable these features in the advanced Touchpad settings.

• Equium A210-1AS: Touchpad problem - the mouse becomes unusable

  Hello

  I have problems with the touchpad of my laptop Equium A210-1AS.
  After some time of use of the mouse becomes unusable and just starts bouncing around the screen and becomes uncontrollable.

  The only solution then is to unplug the laptop and turn the power off, re start the touchpad works again.

  I use Windows Vista and downloaded the latest touchpad drivers.

  Any help would be appreciated.

  See you soon
  Widdy1961

  This problem very strange s.
  Could you please tell me if this problem occurs after you reinstall the OS from the Toshiba Recovery CD?
  I read on several forums of Vista that some Microsoft Vista updates may have a bad influence on the touchpad driver
  Therefore, it would be very interesting to know if this problem appears immediately after the use of the recovery CD.

  Greetings

• Tecra A8 - Touchpad problem

  Hello Forum,

  I use a Tecra A8 model, 2 GB memory, XP SP2. Since a few weeks I have the following problem:

  (1) if I move my finger across the touchpad (fast or slow), the cursor remains on the position, if--if I'm not touching the touchpad.

  After 1-2 seconds the cursor Duke, I've hit the touchpad and works normal (moves as I move my finger).

  (2) if I touch the touchpad with my finger only, not to move the cursor makes little jumps and movements, very, very slow (I think that 1 mm in 3 seconds) to the top, left corner of the screen.

  My Questions:
  What kind of error is it?

  Anyone of you advice or recommendations?

  Best regards

  Peter

  To be honest, it is not some sort of error. I have older Tecra M1 and something like that happen to me. Even on new laptops can happen that the mouse pointer move slowly without reason. If you touch mouse even once, it will be stops and you can use the mouse again.

  I don't know how you're using your laptop, but if you use it on the desktop, the best thing you can do is to use an external mouse and completely disable an internal. After doing that the mouse pointer must be stilly.