Graphics updated to the directory root?

Similar Questions

• Unable to write to the directory root on cRIO

  I need to create a folder in the root directory of my cRIO but when I try to do it via the web interface (Silverlight) it gives me an error 403 (refused).  I can create and edit files and directories in existing files located in the root directory.

  The seller has managed to create a new folder in the directory root on our previous cRIO, but now we are trying to set up another one on our own.  They told me that they don't have to do something special that they do not forget to create this folder.

  Any ideas as to why I wouldn't be able to do this, even if I have all permissions on the device?

  It's confusing, but "all permissions" web interface are only "all permissions for the web server has permissions for things", that's not all. See http://digital.ni.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025 - more precisely:

  Write access

  (ETS, VxWorks) Your target provides write access to its folders and files.

  (OR Linux in real time) If you want to modify or create new folders and files on your target, you can only do in the following directories:

  • /home/webserv
  
  
  • /home/lvuser
  
  
  • /tmp

  Note: Your target deletes the content in the temporary folder /tmp on target restarts.

  Restricting access to the root directory makes the system more robust (prevents the change of important system files).

• Failure of the directory root to display in the library

  I'm using Lightroom 3 - import photos into folders and subfolders with titles, created in the destination Panel.

  the titles of display in the destination Panel, as well as the root of the hard disk images photo - Lightroom - my Lightroom - title of the folder to the subfolder etc as expected.

  -However-

  After the photos are imported and I'll be back in the library to reconsider - clicking on Macintosh HD (I use OS X version 10.7.3)

  reveals only the dates, the photos have been taken and no titles folder or subfolder of the directory root.  Using the catalog I can see all the photos have been imported into the library.

  Any thoughts on what I'm doing wrong or missing?

  Thank you Lightroom

  Try right click on one of the top-level folders and choose 'add a Parent folder '.

  HAL

• SQLNET.log generated in the directory root

  Hello
  
  I use the oracle 9.2.0.8 version
  SQLNET.log file is generated in the directory root on my dbserver and it is consuming a lot of space in my root directory.
  
  can I delete sqlnet.log under the root directory?
  It will do no harm to DB?
  
  all trace levels are turned listener.ora as long sqlnet.ora
  regarding I know the log file should be generated in $ORACLE_HOME/network/admin.
  
  why it generates the log file in the directory root and how get rid of?
  
  
  Thanks in advance

  Yes, this file can be deleted safely.
  But look at this file to find errors, why they are so many and are trying to resolve the first cause.

  file is under the root because it is the directory at the time of the error.
  Check who is the owner of the file and verify that this user made, and why not be able to function normally.

  But if you want to get rid of this file, you can then follow metalink Note 162675.1

  Published by: Laura Gaigala February 3, 2009 13:03

• How to find the directory root of FSX for installation

  the directory of fsx (root) to install and activate fsx f / a 18 x Superbug?

  Hello, Hollywood6xDamage,

  Please do not duplicate messages.  I have merged the threads.  Someone will help you as soon as possible.

  The root directory is the main folder of "Microsoft Flight Simulator X"...

  Default installation is normally at C:\Program Files (x 86) \Microsoft Games\Microsoft Flight Simulator X

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  http://support.Microsoft.com/kb/927007

• How to display the directory root in Explorer

  When I run Windows Explorer, I would like to root directories to show instead of having to open the number of files in the directory of the user. This setting can be changed?

  Click on the round of Windows (start) > all programs > Accessories and make Windows Explorer right click > properties > Shortcut tab and change the target zone for the C drive by typing the following %SystemRoot%\explorer.exe C:\ can apply, OK, etc..

• Problem of update of the directory between TMS & Polycom (HDX, VSX)

  Hello

  We have deployed MSDS and other cisco devices in a business.

  The company already has several devices of Polycom (HDX (3.0.5), VSX (8.5.3)) and we connected those to TMS (14.3.1) for the Organization of directories.

  Everything looks very well, we were able to see the directories of TMS on Polycome devices

  However, the question comes out when we update the directory.

  Any change of MSDS, these devices of ploycom updated their own changes meaning TMS and devices of polycom is interoperability.

  But when it comes to avian (GDS) directory, we find no changes to this directory, even its own changes.

  And these changes are correctly updated for Cisco devices.

  For example,.

  We have 1 HDX, 1VSX, 1 SX20 and MSDS.

  We changed the names of these three system with TMS.

  You could see the name changed in the information system on all devices category. (Even devices polycom names have been changed in this category)

  But if I go to GDS (Global Directory) in Polycome devices, there is no change. It comes even as before. (Even the name change itself)

  I want to ask:

  (1) why this has happened?

  (2) what can I do to fix this?

  Reference the following default:

  CSCuj42053

• nVidia - Graphics Update of the adapter do not install

  10/18/12, I received an automatic update of Windows of my nVidia drivers.  Apparently, they could not install and brought me to restore my system to an earlier version.  I went on the nVidia website and tried to manually update the graphics drivers.  They failed there as well.  Anyone else having this problem?

  Same thing happened to me and the installation failed, but I managed to correctly install the driver from the nVidia site. The version of windows tried to install was the version that supports windows 8. I think I know not if I am running windows 8 so why is-install microsoft without my permisison drivers? This should be an optional update. The only suggestion I can think of to help would be to try your site of GPU manufacturers for the latest version of the supported driver. They usually have links. Good luck!

• Reflow installation creating strange ps1, ps2, ps3, ps4 files on the directory root of my secondary drive.

  Some background information:

  Win7 Pro, x 64

  I just got Adobe CC and made a install a lot of software on my drive C: System, which is a small SSD. D: drive is a separate physical HARD disk. I then created symbolic links for many of the software (not to mention as PS, Illustrator, InDesign and smaller ones like all software "Edge") and those of my drive D: for storage. Once more, to clarify, reflow and Photoshop are two natures on the drive C: System where Adobe CC them installed initially.

  After you have installed the reflow, three files were created on my D: drive, named: ps1, ps2 and ps3. Their structures of folders are almost, if not completely, this is identical to the other:

  

  A quick search system of 'reflow.generate' has also identified one identical, sitting inside my Photoshop CC directory to:

  C:\Program Files\Adobe\Adobe Photoshop 2014\Plug-ins\Generator\reflow.generate CC

  This folder has the same structure of folder/subfolder as above.

  I wonder what the ps1, ps2, ps3 files are and what they do sit in my D: drive directory root. I tried to uninstall reflow, after which these records have disappeared. I then reinstalled reflow and they appear again as p1, p2 and p4 (instead of p3). The other folder in the Photoshop plugins folder, is back as well, as seen here:

  

  I understand that these records are part of the Adobe Photoshop / Edge reflow generator plugin that I watched a video of. What I don't understand, is why I'm getting these additional "ps" files on my other drive. The only other thing I can think of that might help, but I have the Photoshop work on the d: drive. Reflow Edge has not competed at all for its own facility, however.

  These "ps" files are safe to remove?

  Thank you.

  I don't know exactly why you PS1 - PS4. Files in there are supposed to settle in Photoshop to our integration of Photoshop. It could be that the installer has confused on which the PS has been installed.

  It is safe to delete these files. If you want to use the reflow and Photoshop do you run the installer again to see if these files are moved to the right place if they weren't already.

  Hope that helps and thanks for using the Reflow!

  Chris

• Assistant DAQ need graphics update during the collection of samples of N

  Hi all, I have a question about the DAQ Assistant. I need to acquire data at low rates (ca 10 Hz). I want to acquire Let's say 100 samples. I join my card day ten times per second. But when I choose N (100) to 10 Hz, updates to the table only once - 10 seconds samples. Is there another way to take samples of N and be able to watch the chart updated 10 times per second the use of samples keep (10 Hz, 1 sample to read) with timer that ends the while loop after 10 seconds?

  When I use the last mentioned way and write data in the file, I always acquire 101 samples, not 100. And I think that's not an ellegant way to write data to file 10 times per second (higher sampling rates, LabView is unable to write all of the samples file .xlsx, with the CT (s) files, it's better).

  Perhaps to collect 1 sample on request would be ok, but so far I have not had an experience with that.

  Thanks for your replies

  Lefebvre

  First of all, read this excellent whitepaper on the DAQ-mx hardware and stop using the DAQ Assistant, who does not have the flexibility you need to do what you describe.

  Don't you see what you want to do?  You ask to taste 10 Hz and want to update for each samplegraph.  So how many samples do you take before you add the data sampled at the table?

  Now, with the knowledge of what you have learned in the white paper, put some (you can do it in one) features DAQmx to start the Acquisition, in a loop For (with this that connected to N?), take the appropriate number of samples and send that to the table, and then out of the loop, stop the Acquisition.  If you use tasks (created by MAX or using the command 'New task' of the LabVIEW project), you should be able to do this with as little as 3 functions DAQmx (I'd probably use 4) and a single loop.

  Bob Schor

• How to move a site to a subfolder in the directory root?

  On my server root directory has all kinds of junk inside accumulated for years, and my main site is in a subfolder, with a redirect to it in the index file in the root. I want to delete all the unwanted from the server and move my main site in the root directory. After I clean up the server and folder root on my computer, can I just drag the contents of the secondary folder, where my main site is in the root in DW and then upload to the server? Or do I have to do this in the Finder? (Mac) This will break any links? Thanks for any help.

  > All your links are broken, or should I say all links to a file that is moved.

  Huh? This is not true. If you move a file in DW it will scan the content of your files and invites you to automatically update the links. This is why you should always manage the locations of files and names within DW.

• Graphics update of the HP Envy

  Currently, I have a desktop Hp Envy (http://www.bestbuy.com/site/hp-envy-desktop-intel-core-i5-12gb-memory-2tb-hard-drive/3199314.p?id=12... it's a link for it, I have an electric source improved, but I was wondering if I could spend it 780 GTX (http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-780-ti/specifications) is it possible no it corresponds to?)

  Hello

  Most graphics cards under 10.5 "must fit into your PC. However, review this publication of documentat the top of this thread that represents the action just to be sure.

  Most of the graphics cards NVIDIA GTX 780 requires a 600 Watt power supply and the specifications for your PC indicate that a 460 Watt power supply.

• Why I can't name a folder in the directory root with a name beginning with A, B or C in Windows XP?

  I find that I can create a folder called Barton in the C: directory, add files, but it disappears when I reboot.   A search finds nothing of what was in it.  I thouroughly checked for viruses, spyware, etc.  The file for 'hidden' attribute is not enabled.

  The problem is the "Ask Toolbar", but you can continue to try things if you want.

  Things just disappear after a reboot, right?

  Do you think that I would like to ask a specific question and sharp if I did know about this?

  When you did check, messing around and try things, you may want to fix.

• How to make the site root-relative links work in DW and the server?

  See details on buggy behavior DW image link, below. My question is:

  (1) how the site root-relative links work in DW and the server? Or...

  (2) how to reliably automate change of hundreds of links relative to the root of the form

  /images/image.jpg relating to the document?

  In other words, to

  .. /images/image.jpg or

  .. /.. /images/image.jpg or

  .. /.. /.. /images/image.jpg etc... According to the location of the directory.

  The old format (/images/image.jpg ) used to work properly in my previous Setup of DW 8 but appear grey in DW after 'redevelopment' of mac cs5.5 DW. (they look good on the server, but it is difficult to change the image-heavy pages locally when they are all gray).

  I tried to change the files to how DW creates relative links root now:

  /public_html/images/image.jpg, which is a flow of root very easy, attractive, since there is a one-to-one mapping. These look great in DW, but are detailed on the server!

  I looked at the "Advanced" site configuration, and it seemed that it would be possible for the nuke part /public_html/ of my server info... but it also seemed that there was the potential to do damage, modification of these parameters, which are automatically generated from our server connection settings, which seem to work.

  The "links from the document / site root" toggle... did change how DW interprets existing links, or simply change the value by default when you add a link?  I did 80% of the file... before paper links I wondered if relative to the root is not better?

  Of course, it seems less ambiguous for all these pictures if theres a way to make the relative root works for the mode of creation of DW, DW link checking and server.

  Summary of the buggy behavior: (see the test with images here)

  
  

  'old style' link of the root of the site

  /images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: broken (grey w / broken icon)

  Check DW a link: "external link" (i.e., unverifiable, + file might appear orphaned)

  Browser: good

  Ease of switching: n/a (existing format)

  'new style' link site root

  /public_html/images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: good

  Link check in DW: good

  Browser: broken

  Ease of switching: easy

  Link to document

  .. /.. /images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: good

  Link check in DW: good

  Browser: good

  Ease of switching: hard (how to automate)

  Absolute link

  http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg

  Design veiw in DW: broken (grey w / broken icon)

  Link check in DW: external (i.e., unverifiable, + file might appear orphaned)

  Browser: good

  Ease of switching: n/a... not a real option

  Thank you!

  Similar discussions on ' / '.

  Think of your site definition is set up wrong.  public_html should not be to anywhere in your local site.  It is up to your remote site under the directory root definition.  See screenshot.  In my example, the root directory of the server is htdocs /.  This is where you put public_html

  

  Nancy O.

• Why the PS creates a pslog.txt in my directory root user?

  iMac mid-2010

  Photoshop CC 2015

  I noticed this file pop up occasionally and I remove each time I prefer to keep my root directory of the user as clean as possible. This file is needed? He needs to live in the root directory of the user? Is it possible to delete and not to see again?

  The content of the file is the following, and I don't quite understand the need:

  DecrementApplicationEventLevel 00000.2016.02.09_16:41:13.326(+00.000) [TID = 0xxxxxxxxxxxx] ignored decrement operation because the event level is already at 0. This indicates a lack bump level greater event in the stack

  Thanks for any help in advance.

  MJ

  I've just updated to the latest version. I don't normally do until I see comments as each version seems to introduce new questions. The file is now gone all together, but he lived/Users/mjordan (home). I work in v10.11.12.

  Sorry to bother you with this, if this problem has been fixed in the latest version, but I had read this topic other versions in 2014.

  I also looked at that you just sent me a link but is not a solution. It is the equivalent of the stuffing out of your trash in the back of the closet off site