Grayed out Bluetooth device

Similar Questions

• "Allow a device to plug" is grayed out, bluetooth

  I am unable to connect any device to the laptop via bluetooth, even if I used the service before.

  When I turn on the bluetooth and right-click on bluetooth icon - "authorize a device to plug"is grayed out'.

  I use Windows 7, 64 bit. Any suggestions...?

  HOW PAIR/CONNECT A BLUETOOTH SPEAKER FOR LAPTOP/PC/WINDOWS 7 COMPUTER SOLVED...

  Bought a Bletooth long time speaker, it's good for what it is and managed to get coupled with all my other devices - tablet, phone but have never been able to connect it to my laptop Sony Vaio - always pair then would never be able to connect to it. Here's how I managed to do work...

  I decided to start over and delete all Bluetooth devices and start again.
  Make sure you have your computer Bluetooth on
  Down in the bottom right toolbar right-click on Bluetooth icon
  Click on join a personal area network
  Opens a new window in devices and printers
  Turn on your Bluetooth speaker to find out the mode of
  Click on add a device
  Your speaker should appear
  DO NOT CLICK NEXT...
  AT LA PLACE A MESSAGE SHOULD APPEAR IN THE TOOLBAR SAYING THAT ASKS A DEVICE TO CONNECT
  CLICK ON THIS MESSAGE
  It will then ask you to add a matching number to connect (add the number by default if your speaker has a refer to the manual)
  In this case the XMI X-Mini WE does not come with one so I put in 0000
  Worked!
  Paired
  Now click Start - devices and printers, and you should see the XMI X-Mini US speaker
  Right click and click on the control
  Click on connect...
  Combined BOOM and work
  Don't know how or why his works but I have one now listening to music through my Bluetooth speaker.

  Now I have now, it may not work for everyone, but it was driving me nuts and hope that it works at least for some...

• [Win8] Grayed out Bluetooth switch

  Hello
  I bought recently an ASUS K55VJ-SX176H and, unfortunately, I can not activate bluetooth function. Initially it yet showed the bluetooth switch in the category wireless settings.

  So, I ran "Asus Live Update", thinking that the new updates include the latest bluetooth driver. With no results, I checked ASUS website and installed driver Atheros BlueTooth (V8.0.0.214), who made the switch to appear, but grayed out. I tried the other two, and again, it was useless. I have down can't know what I can do.

  If someone could help me, I would be greatly appreciated. Thank you for your attention.

  Thanks for the suggestion, Phil_Y.

  But I don't want to mess with the material already. Warranty is not finished yet, so I would consult rather Asus to do it myself.

• BlackMagic is grayed out video devices

  I've been using a mini monitor ulta studio for about a month, and today it quit working and is grayed out.  I uninstalled and re-installed PP/CC and the blackmagic 9.7.7 pilot.  It works very well with after effects and Final Cut Pro 7 CC.  I already wasted enough time on this.  Someone at - it suggestions?

  Can you check to see if the transmission was disable? Make sure it is checked in the wing of the program monitor menu. See the image below

  

  Peter Garaway

  Adobe

  Premiere Pro

• Bluetooth monitor - power option grayed out

  I just got a laptop Toshiba Satellite A100-163 and trying to set up bluetooth.

  It came with XP Home installed, but I formatted and installed xp professional.

  I had to install drivers manually and got most sorting

  There is always the network left of network controller in the Device Manager I have a feeling is the bluetooth because its nowhere else in Device Manager

  I have problems turning on bluetooth - I installed the bluetooth stack and bluetooth monitor

  Bluetooth monitor is in the taskbar - I right click on it and an option is a wireless link which does not seem to do anything. There is an option to power on and off, but the two are grayed out

  any ideas? I've rebooted etc.

  Thank you

  Hello

  A simple answer: you cannot use the Bluetooth because the Bluetooth device is not available on the Satellite A100-163.

• Android Bluetooth paired with my laptop that Bluetooth was grayed out (NOT the ability to Exchange files)

  Hello

  Connection Bluetooth to an Android mobile with Bluetooth in HP laptop has failed

  I followed these steps to pair the Bluetooth to my HP laptop and the other Bluetooth Android.

  
  First: I clicked on "Add" device "." Second, the Android mobile Bluetooth showed up. Then I connected to it. After that, "Comparing matching Codes" shown to me. (Screenshot below)
  

  Next: The user of each Bluetooth accepted us as confirmation. Finally: The pair has been established well. (Screenshot below):

  

  Although Bluetooth Android was paired with my laptop HP My Bluetooth successfully, the Bluetooth Android is grayed out on my my list of Bluetooth mobile phone as shown in the screenshot below:

  

  Whenever I clicked on the Android Bluetooth listed in my Bluetooth devices, I don't got no control Bluetooth shows me (NO way to send files from Android Bluetooth appears dimmed) also, whenever the user who has the mobile phone android trying to send file in my laptop Bluetooth paired with its Bluetooth Android, it has encountered an error in sending do not file.

  Although the Android Bluetooth is enabled to be detected by other Bluetooth devices.  If there is a problem with my laptop Bluetooth, then I would be facing the same problem with connecting (pairing) my laptop Bluetooth with Nokia Bluetooth.

  Second: A Nokia mobile with the computer HP Bluetooth Bluetooth laptop was successful:

  I followed the same steps to connect Nokia Bluetooth for my laptop Bluetooth, and he was successful.

  

  Then windows checked drivers for Nokia Bluetooth.

  

  

  Then the control of Bluetooth has been illustrated that will allow to me and the other a user send and receive files via Bluetooth pairing:

  

  NOTE THE DIFFERENCE BETWEEN a connection NOKIA BLUETOOTH WITH MY BLUETOOTH, AND ANDROID BLUETOOTH WITH MY COMPUTER PORTABLE BLUETOOTH LAPOTP):

  1. There is no verification windows drivers for the moment got sync to my laptop Bluetooth Bluetooth Android. However, there is a windows drivers for Nokia Bluetooth control when it is obtained associated with my laptop Bluetooth.

  

  2 - THE NOKIA IS NOT CLOTHING OUT(active/enabled), HOWEVER, THE ANDROID IS GRAYED OUT (inactive/disabled)

  

  I hope you understand the answer for me and me.

  Hello

  I suggest you post your query on the HP forums to get information on the numbers of care for the HP customer for your location because we have no details for him.

  HP Support Forums

  http://h30434.www3.HP.com/

  I hope this helps.

• Toshiba bluetooth does not work - leave peripheral to connect is grayed out

  Hello

  I joined toshiba bluetooth "Qualcomm-Atheros bluetooth 4.0 AR3012"
  When I turn on the bluetooth

  Allow a device to connect is grayed on I can't click on it
  Although I check the box to make it discoverable to other bluetooth devices

  But I can't find andy and no one can find me

  Please help thanks

  Hello

  More details would be appreciated.
  What model phone you have and what system is installed on this laptop?

  If the laptop supports Bluetooth and if you have not changed anything in the configuration, you should be able to activate the Bluetooth using one of the function keys.
  Please see the user manual that affects function would enable the BT

  Also new driver BT / battery installation would be necessary in the event that the BT connectivity would not work as it should
  Atheros WLan / BT card requires the installation of the filter driver Atheros BT package.
  It is on the page of the Toshiba UE driver.

  Of course, depending on your Windows system, other software (VAP for Win 7 or a system driver to Win 8.1) must be installed too.

• Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Here is the document

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC438020

  See the Suggestion of Shekhar:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/missing-power-management-tabs/4dd34dfb-B0E9-4f62-8eb8-0b0689344281

  Political group to turn and set the option for the inside network card power management tab

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/50fdee7e-fdf7-4734-8079-3a3aa5556fdd

  Kelly XP Tweaks - on this page scroll down to #204.  On the right side you will see "power schemes/configurations of restoration.  Here are the scripts.  You should see a window with «do you want to run...» »

  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  A link that did not work... TEC438020 http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC438020.

  If you delete the start TEC438020 letters... This would have worked.   Sorry but for some reason that my shortcuts duplicate urls notice the end of the above url shows the same letters that I told you to remove.  Do not forget that in case it happens again in the future.  (God forbid)

• Sound does not work. Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.

  Original title: audio device problem
  just reinstalled windows xp.  Sound does not work.  Under the properties of sounds and Audio, peripheral devices by default "sound" is grayed out.  Microsoft Fix it, but the best I get is "do not set as default audio device.  The lack of sound recording does show a device.  Ideas?  BTW, I sometimes get static noises out of the speakers.

  Hello

  I suggest you to follow the steps from the link and check if it helps.

  No sound in Windows

  I hope this helps.

• RAW Device Mappings is grayed out

  Hello everyone.  I'm a noob EXSi/VMware, so I'm a little out of my comfort zone.  I have a Supermicro motherboard with an onboard SAS controller which is supported in EXSi 6.  I have eight 4 TB drives, attached to the SAS HBA and 2 connected to the integrated SATA SSDS.  I was able to add all readers as warehouses of data and that works very well.  But I need to devote several full discs on a virtual computer and I have not been able to get this working as RDM option is grayed out any virtual machine, I try.  Tried to remove one of the hard drives for data warehouses (missing) but I still don't see it as an option (and now I can not see it when I try to add back as a data store but that's another issue).

  I did research on this question and I tried to disable the RDMFILTER option in the advanced settings and no go.  I tried to run the process in article KB 1017530 (Raw Device Mapping for Local storage, I get the following error:)

  vmkfstools - z/vmfs/devices/disks/t10. ATA___TS32GSSD25S2DM___201009163653400631A4:9 /vmfs/volumes/APPSSD/RDM/rdm9.vmdk

  Unable to create the virtual disk: the system cannot find the specified file (25).

  I thought that I needed to create the folder ROW in the store, so I did and then I got a new message:

  Unable to create the virtual disk: operation not permitted (65545).

  Any help would be greatly appreciated, thank you!

  You have created the file pointer correctly!

  # vmkfstools - z/vmfs/devices/disks/t10. F405E46494C4540046F455B64787D285941707D203F45765 /vmfs/volumes/Datastore2/localrdm1/localrdm1.vmdk

• Why save for Web and devices is grayed out?

  I have Photoshop CS5 on Mac OS X Lion mountain. PS works fine, until today. On some images, I work with, file > save for Web and devices is grayed out. In addition, to save money, the options are extremely limited. It is obvious that I inadvertently clicked on something that caused this, but I just can't understand that.

  I took a screenshot of Photoshop with a test image (test.psd), whose resolution is 72px, RGB, 32 bit, appearance save for Web and devices greyed out. And a screenshot of the Save as dialog box.

  Is the first screenshot to http://eastbrookwind.com/screen-shot.jpg

  Is the second screenshot to http://eastbrookwind.com/save_as.jpg

  I am confused and appreciate much help!

  Right. You work in 32 bits per channel. Change your bit depth.

• Left/right rotation is always grayed out in the device Simulator

  If I run my application in Air Debug Launcher (Mobile), "turn to the left" and "turn right" options in the menu of the device are still grayed out, regardless of whether the publication settings have enabled auto-orientation. This is what prevents the orientation test code. Anyone know a solution?

  More, I found (via a textfield, the current focus of the statement) that my AIR application does not throw the guidelines 'default' or 'upside down' on my device (Asus Transformer to infinity). Only, he throws "left turn" and "turn right". Anyone know of a solution for that?

  Thank you!

  The rotation buttons are enabled only in 'ANY' l report mode / h and auto guides set to true. For other values of aspect ratio, the orientation of the stage must stay in one of the directions specified by the aspect ratio and therefore should not turn.

• "Save for Web and devices..." option under the menu file is grayed out

  I am trying to create a watermark as a fichier.png. When I try to save the file as a png via the option 'Save for Web and devices...' under the file menu of PS CS3, it is grayed out and cannot be clicked.

  I want to save the drawing in the format .png with a transparent background.

  I am running PS CS3 on Mac OS 10.6.8

  Thank you

  Gerard

  There are a few possibilities: the SaveForWeb plugin is missing, the document is not 8-bit RGB or the document is much bigger than SaveForWeb can manage.

• Check out Get the address of the Bluetooth device list

  I have two series Bluetooth devices both send numbers to pc.what I want to know is how to get the address of the list of devices Bluetooth discover bluetooth device then use to connect to the first device read data log and connect a second device.

  Hello Aymanch,

  The Bluetooth Discover VI will be released a cluster with devices within the range of your network, where a feature will be the address and the second part will be the name of the device. You can then use the address as an input for the VI of open connection and then pass this reference reading VI and close connection VI.

  If you want to see an example of how to get the address of the cluster and how to use these screws, please open the example Finder and search for Simple Bluetooth project. The Server.vi shows how to unbundle the cluster and the Client.vi shows something similar to what you want to accomplish. Because you are going to use two devices, you can even use a loop to repeat the operation on the two addresses.

• Finally got the computer to recognize the iPad but when I try to do something tells me that the Bluetooth device is not a driver

  Original title: hardware device

  I'm trying to get my iPod and ipad to communicate via bluetooth. I finally got the computer to recognize the ipad, but when I try to do something, told me in troubleshooting that the device didn't bluetooth "t have a driver. I tried to download without success. I'm not what you call computer savy. could use a little help.

  Hi Annemschipper,

  You can check the following items and check if Windows is able to recognize Bluetooth devices.

  The problems with Bluetooth devices

  Change settings for a Bluetooth compatible device

  You can also visit the Apple support article and see if it helps.

  Device not recognized in iTunes for Windows

  Bluetooth and Wi - Fi settings grayed out or dim

  Hope this information is useful.