Grayed parameters?

Similar Questions

• Parameters Source gray DPX?

  So acuratley of rendering cineon data, we need to set a printing density by accessing the dialogue ANDS 'The Source settings' setting the black and white points for a magnified cineon sequence.

  CS6 no problem...

  But in the CC, 'The Source settings' dialog box is grayed out!

  Any ideas?

  The bug where the Source parameters was not available for image sequences is fixed in the CC7.2 update.

• Cannot change the parameters, they are grayed out

  I am in my account on Firefox version 38.0.5 and when I go into my settings, I need to change the but they are grayed out. How do I get this so I can edit them? I went into the preferences of Firefox, then down to privacy and want to make some changes, but some areas such as clear history when you close Firefox is gray. How can I make changes in Firefox?

  Thank you all who replied to me.

  You have a check mark on the mode of private browsing permissions setting ('always to use the private browsing mode').

  You exit PB to be able to use all the settings that are currently blocked.

• I can't synchronize my parameters of color with my colleagues. Sync settings is always grayed out

  Hello. Although I looged in, my color profile have kept and I'm not synced with my co-workers. I tried through PS and InDesign, but the option is grayed out for the sync settings. any ideas?

  Well in that case I advise you to Contact customer services as technical troubleshooting may be required.

• I downloaded macossierra yesterday. Siri is asking me to allow location in settings and privacy, but I can't tick enable locations.  It is grayed out. help is needed

  I downloaded yesterday sierra of mac os.  However, I asked Siri what the weather conditions were in my position. She said that to go into the settings under Security and confidentiality and allow my place.  I did, but I'm not able to check the enable places.  It is grayed out.  Does anyone else have this problem.

  Hello dogsandcats,
  Thank you for using communities of Apple Support.

  I understand your message that you are not able to activate location Services within the parameters of security and privacy on your Mac. I know how it is important for you to be able to turn on location Services. When you go to System Preferences, then Security & Privacy, make sure you click on the padlock at the bottom left and type your admin password. Then you should be able to turn on location Services.

  On location in OS X and Safari Services
  

  Activation of location Services

  Follow these steps to turn on location services in Mountain Lion OS X or later

  1. Choose System Preferences from the Apple () menu.
  2. Click the Privacy & Security icon in the System Preferences window.
  3. Click the Privacy tab.
  4. If the icon of padlock in the lower left corner is locked (), click on it and enter an admin name and password to unlock ().
  5. Select location Services.
  6. Check the box "enable location services".

  Best regards.

• How do you get mahjong challenge when it is blocked with a gray triangle

  I did happpy playing mahjong challenge now firefox has blolcked with a gray triangle and I can not play...

  Do you have this occur suddenly in the middle of the room, or it works in Firefox 39 was and stopped working in Firefox 40? The reason why I ask is...

  There is a problem with some Flash games does not not in Firefox 40. To see if the game you are playing is affected by this issue (asynchronous loading), you can try this modification of the parameters:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the IPC and pause while the list is filtered

  (3) double-click the preference dom.ipc.plugins.asyncInit to change its value from true to false

  I don't know which begins to take effect immediately, or if you leave Firefox and start it again.

  Please let us know if that makes a difference with this game.

  Background information on this topic: https://developer.mozilla.org/Firefox/Releases/40/Site_Compatibility#Plug-ins

• Gray at the bottom of the window area

  One day, I opened Firefox and it started upward with the gray box at the bottom of the window, as shown in the screenshot. I can't be able to get rid of it. Uninstalled/reinstalled and does not go far. Everyone knows what it is? Thank you.

  Hello

  Refresh (called "Reset" in older versions of Firefox) can solve a lot of problems in restaurant Firefox as his default factory while saving your bookmarks, history, passwords, cookies, and other essential information.

  Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.

  Refresh for Firefox:

  1. Open the troubleshooting information page using one of the following methods:
     • Click the menu button

       

       click Help

       

       and select troubleshooting information. Should open a new tab containing your troubleshooting information.

     • If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
  2. At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
  3. Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
  4. Click Finish and reopen Firefox.

  This corrects the problem? Please report to us!

  Thank you.

• < Display Caller ID > disabled and grayed out.

  The title says more or less. I found yesterday from my wife that when I call him my number comes as "unknown". I know where the preference "Show Caller ID" is, but it is grayed out as non-functional. It is set to 'stop' and will not be can depend on.

  The phone is updated with iOS 9.3.2 and the update has been applied to several weeks (4-8) before this problem arose. I don't know things that occur out of no where, but that's how it seems. I restarted the phone and also reset network settings, but none has made a difference.

  Just days before that, I discovered late one day that all my calls for the day have been "missed". I knew that something was wrong here. Started with AT & T and it turns out that I threw a good sting. AT & T had recently made an update to the system and it had somehow me switched to a phone restricted, could make calls but not receive calls. A few minutes later everything was fine - thought. Today, they assure me that the problem today is not theirs and I should call Apple. Long call with Apple broke and I had to get a call, it never came.

  Don't know what else to say here. Any ideas/help appreciated.

  IMO no matter what AT & T told you, it seems that the fault is theirs. You can just try it with a different sim card and you will have the answer. Also, try to connect your phone to iTunes and "check for updates". This function also checks the parameters of your career, so if there is an update, you will get it.

• Ken Burns still grayed out picture

  I want to be able to hold the last image of a photo in a Ken Burns effect zoom for a break on the topic of the effect. When I try to freeze the last image, "freeze frame" is grayed out. I tried to add the same photo after the first without the KB effect and cropping to match the last zoom, but it is impossible to match exactly and takes too long. I searched high and low for a solution. Is it possible to do in iMovie?

  Freeze frame only works for video clips.  How to proceed for still images with Ken Burns is to put a copy of the clip after the first clip.  With the copy highlighted, click on the crop tool, and then you will see the parameters of Ken Burns.  Click on the arrows 'swap ':

  

  and cultures beginning and end are interchangeable and the departure will perfectly at the end of the original item.  Now, all you need to do is set the end to be the same as the beginning.  Even if this is not correct, it will be noticeable.

  Geoff.

• My Bookmark this page does not. Gray and not black. Need of difficulty.

  I noticed that when I try to bookmark a web page on the Bookmarks tab, 'Bookmark this page' is now gray and not black. Foxfire does not allow me to bookmark a page.

  How can I get this feature restored?
  What's happened in the first place and how can I prevent this from happening again?

  Thank you

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• iMessage trying to activate a bad phone. number - gray.

  Hello.

  I just moved to a new country and I plug a new line of mobile phone.

  I have configured the phone, he updated the parameters of the carrier and all looks great, until I checked iMessage and FaceTime.

  Here's the question:

  The phone attempts to assets using the old number. The number is gray and it has the rotating circular symbol.

  Is there a way to remove this activation number?

  I have already changed the number from phone to phone, changed the password from iCloud, signed by all browsers, hard reset phones and Im still not able to change activation number to activate, activate using the Apple ID.

  Please let me know if you need any additional info.

  I'd appreciate any help.

  Thank you.

  Phone number that iMessage tries to activate depending on the SIM card. You need to disconnect from the iMessage, if you did not before you put the new SIM card in the phone, or if you door your number for a new carrier, you will need to wait until it's finished before trying to activate iMessage. Also, if you do not use a supported carrier, they could block the activation SMS. You should check with them to make sure they support iMessage activation and you have a SMS account with the carrier. They can answer these questions.

• Night shift is unable to use (gray icon)

  On my control center, the night shift icon is gray and so I can not use this function. How can I activate it?

  

  You have a few accessibility settings preventing the night shift?

  Check the settings > general > accessibility to display parameters that can prohibit the night shift.

  Also check settings > display and brightness.  Can you turn night 'On' here?

• HP TouchSmart 610 BIOS, all elements are gray and inaccessible?

  Hello

  HP TouchSmart 610-1010sc

  BIOS HP version 6.09 (FRIEND BIOS 2.6 x)

  I am able to get into the BIOS with F10, but every time he asks: ' "user CURRENT password:".

  When I type the password (empty) computer gives 2 long beeps and it enters BIOS.

  But the PROBLEM is that all the elements are disabled...

  Which means that all the items are grayed. If I look at the instructions of the BIOS (HP bios for motherboard F01 settings) there are many editable parameters (BLUE) as boot disks, lan onboar elements, load default configuration etc.

  But in my computer, everything is visible, but GRAY and inaccessible. I can't access or modify anything even not "Load setup defaults". Only active items are "Exit ignorant changes" and "Exit save changes."

  What's not here?

  How can I access BIOS so that I can change the settings normally?

  Finally the BIOS and boot LOGO obtained works!

  I noticed that, after CMOS, reset all the product data in the SYSTEM IDs inside the HP BIOS section me wiped out.

  So I had to enter my BIOS by CTRL + F10 instead of normal F10, so that the ID SYSTEM fields are editable.

  Then just re-typed all the information of two stickers found the back of the computer.

  First content SERIES only and PART SKU No.. Second was BUILD ID, BYTES and NAME OF THE PRODUCT FUNCTIONALITY.

  NOTICE! Note that you can type BYTES of FUNCTIONALITY that once, when recording it will be grayed out out/no editable.

  After saving these changes to the BIOS and restart the computer, the LOGO is the settings the computer BIOS and fully accessible back once more

• Login stuck to the launch of gray progress wheel

  Two days ago, I stopped my Macbook Pro mid-2012 after a few applications have frozen. I was not running at the time, only Itunes, Firefox and Adobe Illustrator. Things, I normally open and rarely have problems with. Unfortunately the spinning beachball appeared everywhere that I clicked and I had to force quit by holding the power button. Now I turn on my Macbook Pro and all is well until I start to connect to my account. I get my password, accepts it and then it just stays there with this gray progress wheel rotation.

  I left for a few hours, that and nothing happens. I can still pass the pointer with the trackpad without getting a beachball and the rest progress wheel turns so I think its frozen upward or anything like that. I think under its weight is trying to reopen these last applications I had upward and its all just not like it for some reason any. Strange because I've never had a problem with the reopening of the elements after the connection after a stop down front.

  Fortunately, I have another account of user still on there and it works absolutely perfect. This makes me doubt that there's any major problems with my Macbook for now. A few months ago, I installed a 1 TB SSD and its been running smooth with El Capitan.

  If worse comes to worse I have a time machine backup of whatever it is I can do a factory reset and just restore the backup. Would rather not do however if theres a simple solution. I tried to see if I can change the connection parameters and startup items to my account from other accounts system preferences, but it only allows to do this for the user you are logged in as. I tried to boot into Safe Mode and Recovery Mode and just get the same result. I erased the NVRAM. Logging in via the Panel of users to switch to the other account is not do the trick either. I feel like I am running out of options, so any help here would be great before I just reset the entire Macbook.

  Here's a picture of him stuck on the loading screen connection to give you an idea of the problem:

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• HPDM grayed out Image

  I recently installed HPDM 4.5 SP5 on one of our servers with the intention to create and deploy an image WES7 T510 light clients. I copied an image directly from one of the configured thin clients my company but when I import the image into HPDM it shows as grayed out.  Trying to capture an image of the device directly through HPDM always fails.

  The master repository seems to work very well as any test all return successfully.

  The log files indicate that your master repository regulator was not well configured. The master repository control cannot connect to DM server...

  Please check

  1. parameters of the Controller.conf repository - defaults to... \HP device Manager\MasterRepositoryController\Controller.conf

  2. the value in the dialog box editor repository - tools-> management-> repository repository master Double click

  Make sure that the above two values are point in the same direction.

  For example, C:\Inetpub\Ftproot configured as root FTP server

  Your ReposPath in controller.conf value C:\Inetpub\Ftproot

  You must enter anything in the path of the FTP protocol settings field in the repository Editor dialog box.

  You can send me the controller.conf shot and the screen of the dialog editor repository for troubleshooting.

  Just FYI: 'Test' button will check only the port and Protocol for the device target, it does not check the accuracy of the path. This is something that we will strengthen in the future version.