Great Metric - average of several vmnic

Similar Questions

• Not showing is not great metric in dashboard

  Hello

  I'm probably missing something, even though I thought I followed the documentation to the letter. I want to do is display the memory consumed and physical by cluster, using two great measures.

  (1) the scope of the super o:
  Name: Physical memory capacity of the GVZ Cluster in the UK

  sum (this resource: mem: host_provisioned) / 1048576
  mem: host_provisioned = Resources: host system > memory > memory implemented (KB)

  and:

  
  Name: GVZ use total memory of Cluster (GB)
  sum (this resource: mem: host_usage) / 1048576
  mem: host_usage = Resources: host system > memory > use (KB)

  I tested the two measures with a chart and got the results I was expecting:

  

  (2) added an object type-> adapter vCenter = Compute Cluster resource type, which is shown as types of items as "VMware".

  

  (3) I went in 'administration'-> policies-> political library and choose change strategy 'by default'.

  (4) immediately went to the '5 Metrics vires and properties' section and filtered on my great metric and set it to 'State' = 'Local '.

  

  (5) back to the great metric section, I can now also see the default policies tab 'Strategies '.

  After that, I expect the metric Super to be available for a new dashboard. So I create a new dashboard widget list, I select the widget 'Top - N'. Go to edit the widget and click the metric, set type to 'vCenter adapter' adapter, select the subject 'Computer Cluster resource' and then find the super section metric... and unfortunately cannot see super old metric I have created once but can't remember how.

  

  Any help would be appreciated.

  Gabrié

  SOLVED!

  Used the wrong policy. Shouldn't you add it to the 'default' strategy, but in politics of vSphere.

• Great metric not visible

  I created a supermetric and added to a cluster at the bottom of the great metric page object in vrops 6.0, but it is not displayed on any cluster when I discovered the.  Is there another step I need to do?

  Thank you!

  Yes, it works as expected, you will need to navigate to the policy page and enable the supermetric for Cluster objects (in this case, the supermetric apply to all Clusters) or enable all objects (in this case, the supermetric will be applied to all objects)

• Reference on behalf of great metric in the pop-up window of widgets (heatmap)

  Hello

  I created a great metric/package and he attributed to resources and a resource type. I gave the metric super name '% use of data store '. Then, I created a heat map and set the size of the total capacity and the color by the great metric (% of use of the data store).

  When you hover over one of the stores of data in terms of heat, you will get a small pop-up that describes the measures. Unfortunately the great name metric metric is not provided here. Other users who access this dashboard may wonder what this metric is trying to represent.

  Now, it gives me this: Super Metric | sm_6: (color): 78.56973. This example is not that hard to guess buth, there might be cases where it is more difficult.

  Can you do something about it?

  

  Kind regards

  Erik Alm

  There is no work around for the behavior you observe. The heatmap displays the key supermetric, begins with sm_ and is followed by the metric ID. Raison d'etre, the names of supermetric are handled differently in separate fields of table / as attribute names (keys).

• average between several sliders

  Hello

  With the help of another post, I managed to find the average value between 2 sliders. Now, I want to add more cursors and do the same thing. I thought that this would be not simple, but for some reason, I can't get the average value between the first 2 sliders and not all the others. Could someone tell me where I'm wrong so I can find the average between the sliders 2 and 3 and then 4 and 5 etc. etc. I've attached a picture and you would appreciate the help.

  Thank you.

  Well, just read all the clues of cursor (make sure you use cursors locked on a field, not free you), sort indexes and take subsets between lowest and highest both indices.

  

  Easy, isn't it? Let me know if you have any questions.  As before, you decide you want to include the edge of the beach, so modify as necessary.

• find and with an average of several lines

  Hello

  I'm having a little problem and I was wondering if anyone had any ideas on how to solve it better.

  Here's the problem:

  -J' have a 6000 lines large file by columns of 2500.

  -Firstly I sort the file by columns 1 and 2

  -then I find that different in these two columns (1 and 2) lines have the values duplicated, sometimes only twice, but sometimes three or four or five or up to 9 times.

  -This duplication occurs in only the first two columns, but we do not know where lines and we do not know how it is. The remaining columns, i.e. 3 column to column 2500, for matching rows contain data.

  -By programming, I would find the line duplicated by searching for columns 1 and 2 and when I find them, these lines of columns 3 to 2500 average data.

  -Then, once this is done I want to save average data to the file. In each line of this file must have the name of colunm 1 and 2 and the values of the row average columns 3 to 2500. So the file has n rows, columns of 2500, where n will depend on how many duplicate rows exist in the original file.

  I hope that makes sense. I explained the problem in a simple example below:

  In the example below, we have two duplicates duplicate rows 1 and 2 and four in the 5 to 8 lines.

  Example input file:

  Col1 Col2 Col3... Col2500

  3 4 0.2... 0.5

  3 4 0.4... 0.8

  8 5 0.1... 0.4

  7 9 0.7... 0.9

  2 8 0.1... 0.5

  2 8 0.5... 0.8

  2 8 0.3... 0.2

  2 8 0.6... 0.7

  6 9 0.9... 0.1

  ...

  So based on the example above, the first two lines need on average (two duplicates) as do the lines 5-8 (four in doubles). The output file should look like this:

  Col1 Col2 Col3... Col2500

  3 4 0.3... 0.65

  8 5 0.1... 0.4

  7 9 0.7... 0.9

  2 8 0.375... 0.55

  6 9 0.9... 0.1

  ...

  
  

• Create a great metric for virtual machines that shows how many virtual machines on the host parent

  One of the properties of a virtual computer's Parent host.  I would like to pass this info on to a metric Super VM and use to gather the number of VMS are on the associated VM host Parent.   This SM would be so associated with my VMs.

  Is this possible?

  -MattG

  I found this:

  AVG (${adaptertype = VMWARE, objecttype = HostSystem, attribute is summary | total_number_vms, depth =-1})

  Because I had to use a host object type I don't think he would show as a metric of Super in the scope of the VM... it does!

  -MattG

• Great metric for vnic stats

  Each virtual machine has virtual network cards from 1 to 4.  However, I want to get a statistical flow only on the NIC 1.  How can I get a total throughput for all interfaces of "NIC 1" virtual machine?  Is it possible by using supermetrics in vROps 6.0?

  Hi TheVMinator.

  AFAIK, you can assume that an instance vNIC 4000 is a "network adapter 1"in most of the cases.

  So if you don't care for a few rare exceptions, you'll be able to get the result by using the existing metric ' network I / O. 4000 | Usage rate (Kbps) "and do not have to create a SM.

  * There are many parameters for the use of the VM network so you may not need to SMs if there is no need of very complex/specific parameters.

  But for sure, you can create a SM if there is no such thing as the desired metric.

  Kind regards

  Ho-Sung.

• several VMNIC for vMotion

  In all network designs I found the common theme seems to have a vSwitch with 2 natachasery and groups of separate ports for the service console and vMotion, both having alternate vmnic active / standby. IE: vSphere Kendrick Coleman NIC Design
  Curious on if it is useful to have more than 1 active vmnic for vMotion?
  After watching esxtop statistics of network, in the course of a host in maintenance, the 1 vmnic assigned to vMotion mode hit 900 MB/s.  (Port of 1 GB)
  By making it active/active, he out the two max vmnic during a vMotion and accelerate the process of moving the VM?

  We have natachasery to burn...

  By making it active/active, he out the two max vmnic during a vMotion and accelerate the process of moving the VM?

  No, the VMotion/VMKernel port - like any virtual machine group - assign to one of the active network adapters on startup. The second NETWORK card would be used only in the case of a failure of the first network adapter.

  André

• by comparing the average centroid location to the location of the center of gravity measured

  I'm using labview 2015 to design a laser alignment system, using a contoller ag - uc2 and an optical mount piezo driven two webcams. The establishment, is that the webcams are positioned behind the mirrors, which are somewhat permeable, so the webcam will get a shot where the laser beam is pointed. The laser must be aligned manually first, and after that it is satisfied with the alignment, this program will be run once to run in the background. control the position of the laser a few times per minute to correct the thermal drift. After it is first of all, I would like the program to take maybe 10-15 images, to find a location to center of medium severity on each of the mirrors, then switching to compare new images of this center of gravity of the model. My problem is that I can't imagine a way to get a picture of model and have that info Reports to the next iteration of the while loop to the overall program be carried out. I have tried using the structures of the case, which, I imagine, will eventually be the solution, but it did not work as expected. I put the case structure to run based on the value of the indicator loop iteration of the main loop, and I got a while loop in there with registries to raise the center of gravity of this loop and store this information for the next loop to shift. I can see after running the program why my implementation does not work, but I don't know how I can design something that will have an average of several images. I think I should use learn and compare the model, but I don't know how I can convert a cluster (centroid) type of data appropriate for the model comparistion live if you have any suggestions for my existing code or want to offer a different approach, I appreciate it. Also let me know if you need any other screws included.

  In the past, when I had to switch between two 'modes', if you do, I used two consecutive loops while, one for the first mode and one for the second, or I would put Boolean register to indicate that, two modes, the loop was offset.  If you start in a mode, and then more later switch to another once and only once, then you can use a node 'OR' like a lock to power the old way, so the first true feed you of keeps it true until the next time that you run the VI and it returns false.

  I would also add that I looked your VI and the method that you use on average 10 images, while innovating, is usually not a great plan.  Instead of having 10 shift registers build an array of fixed size, just have a table in a shift register, add each new measure at the end and the VI means in the range of mathematics/statistics to calculate the average.

• Demand: Disk latency average VM for VMS powered

  We are interested in finding the average of VM disk latency, as evidenced by the powered on virtual machines.

  We did a group (Group-PoweredOnVMs) in vCenter Ops who has all virtual machines under tension.

  We see this group in the section of the environment on the Overview of the environment.

  We have created a great metric (SM-AvgVMDiskReadLatency) to avg the Lantency of disc (avg (VM: disk |)) Latency (ms) reading the disk())

  This great metric associated with a package (SMPkg-VMDiskMetrics)

  In the Types of resource of the Overview of the environment section, we selected the Group (Group-PoweredOnVMs) and related metric great packaging

  However, when we put that great metric on a metric graph, NO DATA.

  Any ideas on how to do this? It seems that whenever we try to use a dynamic group, we do not get data.

  Thank you!

  You need a reference with ^ N.

  You have a group - wide. However, you want to watch a top-down relationship exactly step 1 below the resource group.

  To do this: avgN (Virtual Machine: disk |) Latency (ms), 1 disc)

• More great conflicting provisions with the liquid code {module_product}

  Hello

  I have the following module below on the great layout to use several models for the products...

  It is now, it renders nothing if any liquid is used in the large Layout Page.

  The tag is used as follows:

  {module_product catalogId = productid "{tag_catalogueid}" = "{tag_productid}" Reiunnaitre = "false" template="/ModuleTemplates/liquidTemps/{tag_custom1}.tpl"}

  By using this module rental model, it produces liquid but with errors:

  

  You can try to replace {tag_productid} with {{identifier}} it doesn't make!

  If I try to use other tags liquid of British Colombia within the model, above, below or using content holders, does not make...

  Any ideas?

  Working on models out of reach of BC, everyone will come with something different since this isn't something BC in all simplicity but must be thought carefully before you move forward without exerting too much work and I guess you maybe if I'm hunting too well because it can be done in different ways the way I used to model before liquid products used the module product and using the example of "custom1" as reference to make a model because models have been created in British Colombia works well since then, I guess that in this case, by that I understood it:

  -Copy models to large product in British Colombia keeping the same liquid code.

  -On the great traced to create:

  {% If custom1 == 'putting into page-1' %}}

  CONTENT OF MODEL 1

  {%-%}

  CONTENT OF TEMPLATE 2

  {endif %}

  -Given that my project has 5 models that it will look like:

  {% If custom1 == 'putting into page-1' %}}

  MODEL 1

  SCRIPTS FOR TEMP 1

  {endif %}

  {% If custom1 == 'putting into page-2' %}}

  MODEL 2

  SCRIPTS FOR TEMP 2

  {endif %}

  and so on...

  I eventually find a large file but worked well next step is to reduce to a minimum the features to operate generally in all models and to reduce scripting.

  Recovery which uses models of product with the {module_product} can be used the following hit to generate your own if you feel its helpful.

  Thanks Liam for the time on this discussion.

• Problem creating Super metrics

  Hello everyone,

  I created a dynamic group and package great metric in the annex. You can find the formula and the screenshots below. After setting, nothing happened for a long time. Normally I expect to appear in 10 min max Fortunately, I managed to get again an example of value and then nothing. I think the formula is fair. SumN is used to summarize the data of all VM disk and 2 is sufficient for all virtual machines. In any case, I used 4 to be sure. Can you please look at these great metrics and share your ideas?

  sumN (VM: disk space |) Put into service space (GB), 4)

  
  

  
  

  Kind regards

  Ramazan
  

  Measures of space updated hourly. If SM using them, they will also create data points every 1 hr. You said you waited 10 min, so I recommend that wait you longer.

• Flaws Super metric

  I'm creating a great metric that handset vCenter failures and defects of the host. The idea is that I have a screen applied to the main operations that shows me if a site has flaws. I can list separately, but prefer to combine in a metric. I tried many combinations of adding two metrics, using max and maxN, but no luck so far. Any ideas?

  You just need to get a little more creative with the formula of SM.   Here's something to think about:

  Max ([$This:A804, maxN($RK19:A1553,3)])

  and listed...

  Max ([this resource: Badge |]) The fault, maxN (host system: Badge |) Fault, 3)])

  Yes, you can use these materials.

  Apply this SM to vCenter resources. What he does is get the vCenter and the higher value of the fault of all hosts 3 degrees of separation under the vCenter... then SM will take the value of one who is highest... the failure to vCenter score or higher fault of your hosts. Magic!

  logic of metric #conditional #supermetric #super

• VCOPS Super metric in Enterprise Edition?

  Hello

  I want to create a number of Super Metrics and packs of great metrics for the installation of my VCOPS but it seems that the environment tab is not available in my version of VCOPS. It is available in Enterprise Edition?

  Gregg
  

  Great management settings is available in the user interface customized, for which you need the license of the company.

  Thank you

  Alex