Qosmio F30-117 - green and blue lines on screen

Similar Questions

• What does green and blue line above the average of the Finder?

  Hi all!

  I have a question about something I noticed recently: a blue and green line on the Finder in the Dock icon. He has been there for a week.

  What's weird, is that it has nothing to do with my screen faulty because it disappears when I hide the Dock or use an app in full screen. I tried to restart my computer.

  It is a picture of what it looks like to...

  

  Could someone please help me find what it means and how to remove the line, please?

  Thanks in advance!

  Mac OS X 10.11.2

  Intel Core i5 at 2.7 GHz

  8 GB 1867 MHz DDR3

  Hi, C.Lehua.

  Please visit Apple support communities.

  I understand that you see the colored on the Finder icon lines.  Let's start by a NVRAM reset, and then adjust the display resolution to see if there is no change.

  How to reset the NVRAM on your Mac.

  OS X El Capitan: set the resolution of your screen

  See you soon

• Qosmio F30-117 freezes

  Hello! I bought a Qosmio F30-117 earlier and it started to freeze. I get to the computer desk-very good, then it completely freezes and I have to remove the power cord and the battery to restart, then it usually loads fine.

  Anyone else had this problem or has an opinion on what do I do?

  Thank you
  Nina

  Hello

  I noticed that system blocks always when some external device was plugged or if the CPU activity is higher than the limit. I put t know exactly what to do with your unit, but observe the activity of the laptop. You may be able to find out in what cell phone of the moment freezes or after the operation.

  I'm sure this has nothing to do with the hardware but just with an operation.

• Features red and green Qosmio F30-117 - display problems-

  Hello

  I have a qosmio F30-117, and until recently, I was thrilled with everything about it.

  Then, mid session, graphics started to deteriorate, which fixed a reboot.

  Then a few days later, he did it again and this time when I rebooted it came with a display corrupted, a lot of aa in all directions then red and green lines everywhere.

  Managed to get by selecting safe mode with network and got a desktop computer but still with red and green lines everywhere.

  Now its got worse again, when I start the screen of the laptop itself is empty, becomes something because it is not completely black as if it was when its engine turned off, but his Blanck.

  To check I have connected to an external monitor and managed to get again in safe mode with network, but still very bad and always red and green lines everywhere.

  I started to take a ride on the old good www and there are many posters and articles with problems and many mentioning the lines red and green etc...
  so I'm not alone, but no one seems to know exactly what it is.

  Some have mentioned the grateful Toshiba this as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  Thanks in advance

  Hello

  In my opinion, this looks like a problem of graphics card GPU eventually started to malfunction, and in this case to replace the motherboard.

  > Some mentioned Toshiba grateful that as a problem and make even if out of warranty repairs.
  Thus, ideas, advice and does anyone know if Tosh have agreed the problem and offer any help?

  It doesn't have to be dull I ve also found this update from Toshiba product support page, but there is nothing listed on the problems of F30
  http://EU.computers.Toshiba-Europe.com/innovation/generic/PRODUCT_UPDATE_SUPPORT

  What to say. Seems only a technician ASP might solve your problem, but replacing motherboard is a costly affair so it s your own decision to want to do

  In any case... good luck...

• Green and blue flickering thick vertical and horizontal line with windows media player

  Original title: green and blue flashing

  Windows Vista

  Windows Media Player
  I have a problem with windows media player. I have a green and a blue flashing thick vertical line. And also a green line below horizontal. Why?
  Help!

  Hi bjorn81,

  1. when exactly you get these lines?

  2. This occurs when you try to play videos?

  3. If so, what is the type of file you are trying to play in Windows Media Player?

  4. What is happening with all the video files or a particular video file?

  If the problem affects all or most of the video files you play (as opposed to a few specific files), the software of the driver for your video card (also known as a graphics card, video, graphics card or graphics card) may be outdated.

  Play an audio or video file: frequently asked questions - what can I do about video problems, such as green or pink lines appearing in the flickering or choppy video, the player will stop responding during video playback and so on?

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  Also check out the link:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this information helps.

• Qosmio F30-117: Impossible to establish FTP connections

  I have a Qosmio F30-117, windows XP, Norton Internet security.
  When I try to FTP to my site I get FTP connection failed.

  I tried it on a friends computer and the connection has been established the first time.
  When I joined my laptop to its broadband - no FTp connection. This eliminates at least my router.

  I tried to disbale parts of Norton Internet Security, without success.

  Help?

  Hello

  so if I were you I would completely disable the Norton software and make sure that the Windows Firewall is to leave you hollow. If not, you should check if your friend has put in place properly. If you want to test that your machine is able to connect via FTP, then go to www.kernel.org and enter an ftp address.

  Open your favorite FTP client, and then try to connect. If the connection fails really then double check all the settings and try again. I think that the problem is so low that everybody he oversees everything. ;)

  Welcome them

• Qosmio F30-117: A single HARD drive is recognized after upgrade to 120 GB

  I have a Qosmio F30-117 with 2 x 60 GB Toshiba hard drives installed. I want to switch to 2 x 120 GB HARD drive, but my Slot 1 does not recognize the HARD drive as being present. Slot 2 recognizes that a 120 GB HARD drive is present.

  This happens with two 120 GB hard drives installed in the two slots and when inverted as well. I don't use RAID so no mirroring happens.

  Any clues out there?

  Hello
  I think that it is will not be problem.
  Try putting 2 HARD drive and then install a sistem.
  Otherwise, you can not lose a sistem on old first HDD, if you have a problem.

• Qosmio F30-117: how to turn on Bluetooth?

  How to change the blue tooth, qosmio f30-117. As the software is preinstalled to the blue tooth.

  Post edited by: jdukhi

  Hello

  According to the page Toshiba that I found on the net, BT is not available on this device.

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=UK&PRODUCT_ID= 116647 & DISC_MODEL = 0 & toshibaShop = true

• Qosmio F30-117: after upgarde to Vista - no sound

  I have improved my Qosmio F30-117 to Windows Vista with a clean install.

  I downloaded all the drivers from Toshiba for Vista website, including audio drivers.

  But I have no sound, everything else works fine. I verify that it is not cut.

  Sound driver details are: Sigma Tel High Definition Audio CODEC - version date 040407: 6.10.5462.0

  Its worked before upgrade.

  What did I miss?

  This is very interesting case?  :|

  I have read about similar issues and I have read about possible solutions.

  I could be possible that this may happen because the sound has cut out Windows XP before Windows Vista was installed.

  I studied a bit and found this useful and interesting paper Toshiba which describes the problem and provides and solution:

  [Audio cut off (no sound) after the installation of Windows Vista: http://209.167.114.38/support/techsupport/tsbs/all/-TSB001438.htm]

  Maybe you should check this!

  I would be grateful feedback from your part

  Greetings and good luck

• Green and purple lines

  Hello

  My HP Pavilion g6 - 1207ev is the Green and purple lines on the screen appearing. He started out of the blue, they come ang from time to time, but when they appear, they remain even after it closes down or restart.

  Any piece of advice?

  Thank you in advance!

  Hi @phekal

  Welcome to the Forums of HP Support!

  So, it looks like you have intermittent video display problems. I'm happy to help you with this.

  When happens the screen glitch happened after the computer has been running for a while, or it is immediately after power-up?

  You said the problem recurs after a stop and restart. Is this an immediate restart or you let the system closed for a period of time?

  If the computer is stopped, for say half an hour, and then restarted never arrive glitch screen?

  I am trying to determine if it seems to happen when the computer is hot and has worked, or if it occurs also on starting cold. If this only happens when the computer is hot or warm, so it suggests a problem of heat or a board failure. If it happens randomly on a boot cold and often does not occur if the computer has been running for a long period, it may be a conflict pilot any.

  Problems related to laptop (Windows 7 and Windows 8) displays
  Diagnose a display LCD (LCD) for damage

  If it looks more like a driver problem, then you can download drivers from the support for your notebook page. Just be sure all first select the operating system suitable for notebook you and the other button to refresh the list of drivers.
  Drivers for laptop HP Pavilion g6 - 1207ev

  If it seems that the problem comes from the screen or the graphics card, then you will probably need to call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps at all.

• AVI Clips imported into CS.5.5 has the color green and colored lines

  NOTE:

  I use the video monitor for the CS5.5 program.

  Always trying to between CS5.5 and test the trial version. The new challenge is the color green and colorful lines on the imported. AVI files.

  Of course, some advice would be appreciated. Thank you.

  nVidia card?  Go to the nVidia Control Panel and set the parameters of quality 3D of 'let the application decide '.  If you have an ATI card should there be similar parameters.

  -Jeff

• Help! Lightroom 2.5 red and blue lines.

  Hello everyone, Reacently I upgraded from 1.x to 2.6 and now my previews show a kind of red and blue lines around highlights, which bothers me not at all, the big problem is that these lines appears in the prints from lightroom. And that's not all these line also appears in the exported to photoshop.

  My files raw directly addressed (in PhotoshopCS3) shows no problem.

  Thank you!!!

  You use a PowerPC (e.g., G5 Mac) machine?

  Your thread title says "2.5", but your original post mentions the upgrade to "2.6"... I bet that you are using 2.5. Is this fair?

  If the answer to both is Yes, then Yes, it's a known issue for specific camera models. It is fixed by upgrading to 2.6.

• Qosmio G10-133: the blue lines on screen

  To all those who can help you:

  I turned on my Qosmio yesterday to find a series of unwanted blue lines, distorting the Qosmio logo. Lines and distortion continued until the operating system came at the opening of my office. At this point the whole system locked and the screen went completely blank.

  The Qosmio player suffers from the same problem. The boot system, but crashes when the display is asked to do something.

  I can open the operating system in safe mode, but the lines still appear to a lesser extent on the screen.

  I have run all the tests and has been through the manual troubleshooting section. I tried to reinstall the drives and roll back to the previous facility. But, for all that I try, nothing will change.

  Qosmio my friend did exactly the same thing a month or two it is a. Solution from Toshiba was to replace the motherboard.

  My Qosmio is still under warranty, and I am very happy to send it because Toshiba has one of the best customer service I've had to face.

  But, I was wondering if anyone had any ideas?

  Thank you very much.

  Hello

  I also very pleased with the customer support service Toshiba m.
  I think that the simplest and the best way to resolve this weird display problem is to bring the unit to the ASP. Laptop you is guaranteed to be protected and a replacement is free.

  Good bye

• Qosmio F30-117: how to calculate the Win Vista experience Index Graphics score?

  My F30-117 has a NVIDIA GeForce Go 7600 of type graphics card. WIE gives a score of graphics of * 4.9 based on the following information:

  399 MB total available graphics memory
  128 MB dedicated graphics memory
  0 MB dedicated system memory
  271 MB shared system memory

  However my G40-108 has a NVIDIA GeForce 8600 M GT type graphics card. WIE only gives a score of graphics of * 4.4 based on the following information:

  1791 MB total available graphics memory
  512 MB dedicated graphics memory
  0 MB dedicated system memory
  1279 MB shared system memory

  Someone knows why? The two PCs have the latest drivers and all the Windows updates available. Both are running Vista Ultimate. If something I expect the scores to be the other way around!

  Hello

  The functionality of Windows Vista experience Index that is designed to help better understand
  How Windows Vista and other software will perform on your computer.
  As I know the Windows experience index scale varies from 1.0 to 5.9.
  A higher base score means that your computer run better as a computer with a lower score.

  I don t want to explain the characteristics of everything because there are a lot of pages useful Microsoft that already provides this information:

  Check this box:
  [Windows Experience Index: year in-depth Look | http://windowsvistablog.com/blogs/windowsvista/pages/458117.aspx]

  or this MS site:
  [Windows Experience Index | http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/experienceindex.mspx]

  Good bye

• impression of 8000 poor quaility and blue lines

  Jet office pro 8000 color printing quaility with blue lines all of a sudden.  I used a non HP cartridge and switch to a HP one and the problem is persisiting.

  The printer Officejet 8000 has separated from the printheads and ink cartridges.  The system directs ink cartridges down left of the printer until the printheads in the internal part of the unit.

  When a cartridge is changed in the 8000 there is still residual ink in the pipes and a little in the print head of the unit.  If you use Non HP ink, then it is possible that this ink is currently harmful has already damaged or the printhead (s) of description.

  However, there is a document with steps to help resolve when an Officejet 8000 has developed a print quality problem.  The document can be found here.

  I'd also take a look at this thread. I hope this helps.