Green area at the bottom of my dvd drive (1/2 screen)

Similar Questions

• Why is it whenever I log in now it asks me my password and to print what the Dingo letters are at the bottom of the page? I'm sick of having to log since I was an administrator of the computer

  Whenever I connect it asks me my password and to print what the Dingo letters are at the bottom of the page.  I forgot my password once and never
  Since then, I was invited to my password.

  Hello

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  See also:

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

• When I drag files in WMP the sequence of songs is not because it is in the list of files. the first certain tracks are at the bottom of the playlist

  When I drag music files in WMP and in the field of reading list, the sequence of songs is not as it should be determined in accordance with the list of files in Explorer windows, the first or the first few tracks are at the bottom of the playlis.
  For example when I drag the track 1 to 10 in WMP playlist could end up with the 4,5,6,7,8,9,10,1,2,3 sequence. It ranges from which follow playlist starts with, but the first track (s) (rare) is at the bottom every time.

  PS. Shuffle is not lit.

  Is not necessarily any indication of a fault as WMP does this, even when it is running correctly [he apparently gets files loaded in the order that they appear in the allocation table disk files].

  You can

  1 after dragging in the playlist, drag files to the top or to the bottom of the playlist in the desired order before you save the playlist.

  2 Allocate Index properties for each track before slipping as WMP then normally behave correctly when you drag them.

  3 you can also drag the in WMP individually to achieve the same end result.

• Photos with green area in the corner

  All my photos have a green box in the lower left corner with a white check mark inside the box.  They were not always so and I can't figure out how to remove the box/check.

  All my photos have a green box in the lower left corner with a white check mark inside the box.  They were not always so and I can't figure out how to remove the box/check.

  =============================================
  If you are running Norton 360... the following information can enlighten us:

  Check marks on the photos

  Green checkmark or icon collection blue arrows displayed files in Windows
  Explorer:
  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

  If you do not need the backup indicators feature you can turn off by
  by clicking settings in the main window of Norton 360, disable the backup
  Status indicators check box and click Close.
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• The video does not appear correctly, there is a Green Ribbon at the bottom of each video, someone can help me?

  the colors of the videos are Let's say irrelevant, you can see the Red or blue models in each video.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• someone moved the taskbar, and the notification area of the bottom edge of the monitor on the right side... I can't do your choice.

  How to restore areas of the bar of tasks and notification of their flattened by default on the lower edge of the screen?

  Hello

  This Information from Microsoft in the link should help you with your problem.

  Click 'View all' once you're there:

  http://Windows.Microsoft.com/en-us/Windows-Vista/unlock-and-move-the-taskbar

  See you soon.

• Solutions to the problem of CD/DVD drive cannot read DVD discs

  This article will tell you 3 ways to solve the problem of the CD/DVD drive do not read the DVD disc. Please the process step by step.

  Solution1. Clean the DVD disc

  If your Player cannot detect the DVD disc, the first thing you need to do is to clean the DVD disc. Use a soft and dry cloth (not painted) to wipe the disc from the center of the disc to the edge. Please take care to not to use a paper to clean the disc with a circular motion, it will scratch the disc.

  After cleaning, inert the DVD on the drive to see if it works, if the reader can't read the disc, use a cloth of cotton wet with water or alcohol to clean the disc. After the disc dry, inert re the disc on the drive. If the reader can read, the operation is complete. If this isn't the case, please turn to the option2.

  Option2. Check the disc to see if it has been damaged

  Draw the DVD from the drive and check if there are some scratches or small cracks on the disc. If the disc is damaged, please try another DVD disc to see if the drive can read. If the drive cannot recognize the new disk, there could be a problem with the CD/DVD drive. Please turn to solution 3.

  Solution3. Clean or repair the CD/DVD drive

  When a CD/DVD drive has been used for a long time, its ability to play disc will only get worse. Then, the reader can not read some discs, or blocking your computer in the middle of the reading disc. This is usually due to the aging of certain parts of the disc, CD/DVD player dirty.

  Open the drive to check if the DVD reader accumulates dust and dirt, if so, the cold air from the hair dryer allows you to clean the inside of the DVD drive. Be sure to not blow on the optical sensor orally, or clean it with a cloth of cotton with water or alcohol. After cleaning, insert a DVD disc on the drive to see if it works. If still no, you need to call the s command customer service or take the reader to a computer repair shop.

  Post edited by: Newhampshireguy

  Thanks for sharing your experience with us!
  I think your assignment might be useful to others here in the community.

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• The lack of CD/DVD drive - not recognized by windows or other programs

  help-tried several fixes m/s and fix it but did not help. Here are a few messages I get: when in the details of the driver for my Sony DVD + RW AWQ160s - update drivers: here are 2 notches and uncked 2, one by Sonic Solutions and a Roxio time saying no digitally signed (that would be a problem)?  also when I look at update or install the updated driver, after that search, I get this is the best driver for this device - I don't have this device Ouch!  Without my CD drive E work of course I can't even try reinstalling drivers/utilities cd... can someone help this computer incompetent gal?  I'm ready to wipe and reinstall vista I have other problems like IE does not and ms word does not always.  I did go back several times, and perhaps not far enough back but had a Trojan horse and do not want to deal with it again.  thx for any help

  Hello

  (1) would you please provide more information about the problem you are having with word and Internet Explorer?

  Method 1: You may need to reinstall Roxio on your computer, please see the article below for programs that can cause this problem:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

   

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A300 - how to use the recovery with external DVD drive disc?

  Hello

  I bought a toshiba Satellite A300 - 15 d

  FTM the tsscorp drive that is installed in the camera no longer works (does not detect any type of media what so ever). ) need to recover the laptop, so I used a USB DVD drive to boot from the restore disc, but after that the charges of recovery console it says waiting for media in the f: drive, which is the tsscorp drive although I used an external drive to load the disc.

  What files should I edit to make it to load from the drive externally and if this isn't the solution, what do I do?

  Thanks in advance

  Hey Buddy,

  Unfortunately I think that it of not possible to use the recovery with external CD/DVD drive disc. Therefore, place the internal for use the recovery disc.
  You can get a new drive to an authorized service provider.

  But if the original OS from Toshiba is installed, you can use the function of disk recovery HARD reinstall Windows as well. Go to the advanced boot menu (F8) and select Repair my computer :)

• On the Satellite A100-646 DVD drive replacement

  Hi all

  I want to replace the DVD drive on my laptop. (I never solved a lot of problems)
  Do you know if there is a list of compatibility for the A100-646 model?

  Model to suggest me?

  Thank you very much.

  Concerning
  Fabrizio

  Hello

  This info you can find in the document of the user s manual on page 7.
  I don't know which is placed in your laptop now but to choose one of the listed DVD super multi drives.

  Bye and good luck!

• the usb ports and DVD drive on my laptop of ts 17 want does not work correctly.

  My laptop dvd player cannot read software, flash drives and card readers and other usb devices d0esn ' t work correctly when inserted into the usb ports. I opened the Device Manager and noticed that the uj8c2 of ram dvd has a yellow triangle below. I clicked it and the State of the device as follows: WINDOWS cannot CE HARDWARE NOT CHARGE THE DEVICE. THE DRIVER MAY BE CORRUPTED OR MISSING. (code 39). the error status was ox x %. Today, I downloaded technical assistance from hp and when he ran a check on the system, it recommended two options for downloading 1. HP NOTEBOOK SYSTEM BIOS UPDATE (processors intel). 2 HP PC HARDWARE DIAGNOSIS UEF. I tried to download but were not available. I don't know if this problem can be corrected by the Manager of recovery so please let someone help out me. This month will be the third month, since it was purchased. Thank you in advance for your answers.

  Hello:

  For the DVD player, please try troubleshooting step 3 on the link below.

  http://support.Microsoft.com/kb/314060

• Uninstalled PSE6 Mac 10.6.8; reinstalled; actions not here; they are in the usual folder on hard drive; remove the multimedia file in PSE6 closed; restarted the computer; Let regenerate; still not here

  Oops think I put all the info in the title.

  Uninstalled PSE6 Mac 10.6.8 (had printing problems and wanted to go back)

  Reinstalled

  Actions not here

  Actions show that they are in the folder under the PSE6 Macintosh hard disk in the folder Photo Effects

  Deleted Mediadatabase.db3 PSE6 being closed

  Computer restarts

  PSE6 opened and let regenerate

  Still not here

  I don't understand. When you uninstall PSE 6, you also uninstall all the third party material, that you added. You have to reinstall them after reinstallation of PSE.

• The satellite A65-S1063 DVD drive does not work with this type of disc

  Hello world
  have a strange problem - my combo does not read dvd - r of a box. Everything is ok, when I put a disk anywhere else, but in this particular area or empty or written are recognized, it crashes just after trying to read and the lamp burning. The most funny thing is that when I check the discs on other computers, everything is fine with them. Any ideas?

  Hello

  For me it s case. You have updated firmware and this kind of DVD is not listed in the list of firmware. As Stefan has suggested, try a different brand of DVD.

• To the Satellite 2450-101 DVD drive failure

  Hi guys again...

  I have another problem with my old laptop Toshiba Satellite 2450-101 which I hope you can help me with.
  The original DVD-rom drive - a Teac DW - 224th - went "off the radar" a couple of times a year and only re - appear in my computer after a re-boot, but he then quickly disappear again.

  It is curious that the drive is still listed in device as Manager works correctly.
  Would have to be a complete reinstallation to get it back again when the process would start over.

  Now during the boot process, a message appears at the top of the screen saying "error Eide...
  I bought a new replacement brown-box DVD - RW double layer drive PC World - a Sony IA2604H - and has installed but it's exactly the same thing but this time she is mentioned in as a 'CD-rom SCSI device' Device Manager... which is certainly not.
  In both cases, readers are completely dead and does not eject even trays.
  Needless to say, it's driving me crazy.

  Can you suggest anything?
  Thank you once again...
  JB

  You can boot from the bootable CD?

  If so, then try to remove the upperfilters and lowerfilters:
  http://support.Microsoft.com/default.aspx?ID=314060

  If you cannot start from the CD, then either:

  (1) the ODD or another component of the motherboard connector is defective / in bulk.
  (2) the original Teac ODD is defective, and the new Sony is not compatible (has the wrong master/slave settings)