Green light is on after saving workout

Similar Questions

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing the batteries?

  Why the green light on my magic keyboard and mouse flashes green when I turn on after replacing batteries (and not connect to the computer; battery tested good tester)?

  Simply indicates that the devices are on.

  Barry

• After several years of functioning, my Time Capsule shows a yellow flashing light instead of solid green light.  He always seems to be working, but watch the blinking light.  An update is necessary?

  Time Capsule.   After six years of good operation, my Time Capsule shows a yellow light flashing instead of green light solid.  It seems to work fine, and I tried l ' switch off and restart, nothing helps.  An update is necessary?

  The Capsule of time... and other Apple routers... flashing orange when they have a message for you. To see what it is...

  Open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the Time Capsuleand a small window will appear

  If you see an Update button, then new firmware is available for the Capsule of time if you want to install this package. To do this, click on the Update button

  Otherwise, find the Status parameter and then click on the little orange dot it for more information on why the status light flashes, with a suggestion to fix whatever may be the cause

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Problem of green lights (heart probe)

  Yesterday during the training of the "Promenade of the Interior", I noticed that the green lights (heart sensors) are still on.

  I restarted the watch, but as soon as I open workout app, the lights are on: fiscal year 20 minutes, they turned off some time just for 2-3 seconds.

  Please help me understand what the problem is?

  I exercise almost every day, and this is the first time I see them constantly of lighting.

  Both iPhone and shows are up-to-date with the latest software

  Thank you

  Hello

  This is a normal behavior.

  Follow-up training through the training app, Apple Watch measures your heart rate continuously.

  More information:

  Your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  Use of the workout on your Apple Watch - Apple Support

• no power and green light on my hp Pavilion flashes

  Hello

  I am trying to understand if the power supply on my hp is bad or not. The green light on the back of the Tower flashes and the computer does not illuminate. I tried all the preliminary things and nothing works, the green light continues to Flash until I disconnect the large plug into the motherboard, then the light remains on and not flashing. Once I unplugged the power cord and the main to the motherboard disconnected thus form, I then tried plugging the power cord disconnected and reconnected then the main to the motherboard plug (kind of try to jump start it up), the fan is trying a (but only for a second, then goes back, so it does not start).

  Does anyone know if this means that the power supply is bad or if something else could be wrong? I wonder if the power would be bad when the computer is clearly trying to start, but not quite making it.

  If the power supply is flashing it must be reset.

  Unplug the power cable from the wall and the power supply.

  move the red switch in the reverse position, in that it is and then bring him back. If you live in the USA 120Vac->-> 120Vac 220Vac see image below.

  

  After having done that, you can plug the power cable into the power supply.  Connect the wall power cable. If the power supply is still usable is no longer flashes.

  Best regards

  ERICO

  Edited to correct the broken image link.

• Desktop won't start. flashing green light

  I have a 1318NX Compaq Presario SR which will not start!  There is a green light flashing on the back of the power supply; which is normally green 110V AC is plugged into it.  I tried the trick of the Start button while not plugging the power cord... no help.  I also opened the case and carefully got rid of any power cord of all internal devices... the light turns green only when I pull the main power of the motherboard!

  I need to replace the motherboard?  Troubleshooting on hp.com site would indicate that the power supply is OK if the light is solid green.

  Thanks for your suggestions,

  Lou

  My wife's computer had the same problem several times. A solution I found that worked before was to unplug the power cable from motherboard and the power supply cable to the back of the PC and then connect the power cable and plug the motherboard power cable while holding down the power button. Scary, to say the least, but it worked, until one day I accidentally spilled the bad circuit breaker and then spend two hours trying the same solution with no luck and the Google search again. And here's what I found. It is the simpler solution even more cruel. It is simple and noninvasive and no matter how tech savvy you are. Take a blow dryer and turn it on to blow air at the rear of the power supply for a few minutes. When you see the light turn green, you're ready. It's worked for me after that it worked for a hundred others, maybe more. A look at the testimonials on this site: http://talk19.wordpress.com/2008/01/13/hp-m7088d-power-supply-led-blinks-green/. It's a shame that nothing like that appears on any site of HP. So don't waste your money on a new MoBo or PSU. All you need is dry hair of your wife.

• Toshiba 40RL953 became unresponsive; green light at the edge of

  Today I have updated the firmware on my TV via the internet. After the update had completed, I browsed some improvements for awhile and watched television.

  An hour or later, I became a game of children on Toshiba places.
  After finishing with the game, I stopped and the TV became unresponsive. green light on the Board but no response to remote or onboard controls.

  After 30 minutes of waiting, I turned off the wall, but when the computer reboots, the same question occurred, TV is completely insensitive with screen black but turned on.

  While I wait for CS to get back to me, anyone have any ideas?
  Can I previous back on firmware flash from a USB Pendrive without access to the menu system, or anything like that?

  > I fixed it, so for those who have TL93x series, this is my email address [email protected], I'll try to help you.

  Could you share your experience and your knowledge here in the forum?

• Flashing green light

  After that my Tablet has been asleep for a while, a green light flashes next to the power switch. It is about 1 cm in diameter. I chatted with support and she told me it was an indicator that the battery is fully charged and if I turned on the Tablet it stops flashing. I told her that my battery is at 57%, and the light flashes only when the Tablet has been asleep for a while. This went back for a while before that she said that she could not help me. Nobody knows what this flashing green light and how do I turn it off? It is very bright in a dark room. I see two posts on the forums of Android Tablet but no solutions, although some thought it was a gmail notification.

  This is a notification e-mail and should be able to be turned off by disabling the notifications. [Press where time is on]--> [time again when the display appears]--> [notifications turn off]. See if it works for you.

• Wireless switch on, but the green light is turned OFF so WiFi doesn't work do not

  Hello

  Sony VAIO VGN-FE780G with Windows 8.

  Wireless switch starts giving the problem for the past 1-2 years. The green light is used for down working on laptop, usually as he used to come down as soon as you move the laptop little. I used to move the cursor to the market and push it a little to make it ON. This is usually used to make green and wifi, used to work.

  Last week the green light went off and then even after trying to do ON dragging to MARKET or pushing, sound not to become green.

  My guess is that the switch had bad connection and now it has finally broken from the inside.

  What is the solution? I can open the laptop and fix it?

  Kind regards

  Sachin

  raklow364:

  Although the VGNFE780G initially provided with Windows XP and is not supported for Windows 8, I would say that if you had Windows 8 working on the PC to WiFi before, this seems to indicate a problem of material with the switch.

  Have you tried opening the charm of settings in Windows 8, and clicking on the PC to change settings link, then wireless to see if the WiFi radio has been disabled in the settings?

• A continuous green flashing button loan after removing the impression that job - Laserjet CP1025 colour

  I can't get the blinking green ready button to stop the flashing of a Laserjet CP1025 colour. Iniatially I thought it was a fault in the queue and after much effort, I was able to delete a print job that is persistent. I uninstalled the drivers printer and re - install, but it still wouldn't print. I have unplugged the printer from the computer and turned on with the only power to come in it, and even the little green light flashes at me - what can I do?

  It seems that this print job that failed got stuck in the printer memory.  The only thing you can do is a hard reset to clear the memory of the printer work.

  To do a hard reset:

  1. Make sure that the printer is turned on.
  2. Pull out the power cord from the printer.
  3. Pull out the power cord from the wall.
  4. Wait 30 seconds.
  5. Plug everything back in and turn on the printer.

  If this does not work, you will need to replace the printer.

• Precision T3500 1-3 green lights + no start

  Hello!

  My T3500 does not start, Ive had this problem before and it started working again after I just took the PSU and reconnected all the internal cables.

  Symptoms:

  Solid amber light shows, psu clicks once mobo and the front fan almost begin to turn, and briefly, a green light flashes on the mobo but no dΘmarre, when I press the button of automatic test.

  Shows Green 1-3 on the front panel lights when you press the Start button. No light on the power supply when the self test button is pressed, there is no error beeps. Last time this happened the PSU shone less green, but not this time.

  I bought a new power supply, but I get the same thing that above lights green 1-3 etc and tried all disconnect and reconnect one at a time as before.

  My son where playing games to computer for a few hours before he died and it was getting very hot, can the mobo or cpu burn? I never had problems of heat or any other error before blue screens.

  Now, I suspect the motherboard but I do not know how to test that or how you could tell if the mobo has failed.

  ID really grateful for the help!

  Little by little...

  Yes, you will get this error message if the SATA (SATA Mode) operation is wanton in the BIOS configuration.

  And make sure that the battery on the motherboard is good too.

• Don't Dim green light no fix

  My 2012 Macbook Pro 13 inch lost its charge a week ago. The charger lights a green light. When I press the button on the side of the Mac to see the power, only the first green light blinks then turns off. The Mac does not load.  It took to pcworld and connected to one of their Chargers it bright green illuminated (should be orange) and still won't turn.

  I tried SMC

  Tried to remove the battery and put back

  Nothing works

  You might have against accidental damage to the logic or the Board of Directors of magsafe DC. You must bring it into an Apple store for troubleshooting.

  Here's an article on what charger you need for your model. I'll try to test a known good charger with your battery installed and started. What is your state of the battery when disconnected and plugged?

• That means a green light flashing on iPod Shuffle 4th Gen?

  When you listen to songs on my iPod Shuffle 4th gen, the LED flashes green (connected to the helmet, not the USB port on the computer).  I thought it was supposed to stay green. What does a flashing green light?  Thank you.

  When you play the shuffle, the light usually indicates the level of battery charge.  Green , fresh strong (I think that more than 25%).  He goes to the orangeand then Red (reduced rate).  While playing songs, he should not stay ON or flashes continuously, unless you press the control buttons.